Cytotoxic effects of composite dust on human bronchial epithelial cells

Genetic alteration profiling in middle-aged women acutely exposed during the mechanical processing of dental nanocomposites

Nanoparticles (NPs) have become an important part of everyday life, including their application in dentistry. Aside from their undoubted benefits, questions regarding their risk to human health, and/or genome have arisen. However, studies concerning cytogenetic effects are completely absent. A group of women acutely exposed to an aerosol released during dental nanocomposite grinding was sampled before and after the work. Exposure monitoring including nano (PM0.1) and respirable (PM4) fractions was performed. Whole-chromosome painting for autosomes #1, #4, and gonosome X was applied to estimate the pattern of cytogenetic damage including structural and numerical alterations. The results show stable genomic frequency of translocations (FG/100), in contrast to a significant 37.8% (p<0.05) increase of numerical aberrations caused by monosomies (p<0.05), but not trisomies. Monosomies were mostly observed for chromosome X. In conclusion, exposure to nanocomposites in stomatology may lead to an increase in numerical aberrations which can be dangerous for dividing cells.

Effect of dental composite dust on human gingival keratinocytes

OBJECTIVE

The aim was to investigate the effect of particles released during grinding of dental composites on human gingival keratinocytes (HGK).

METHODS

Specimens from Filtek™ Supreme XTE and ceram.x® universal were prepared and ground to dust. The dust was filtered (≤ 5 µm) and the particle size distribution was examined using NANO-flex®-180° dynamic light scattering (DLS). Suspensions at five concentrations (3, 10, 30, 100 and 300 µg/mL) were prepared using keratinocyte growth medium (KGM). These suspensions, as well as a positive (CuO) and a negative control (KGM) were added to HGK. The cells treated with Filtek™ Supreme XTE suspensions were analyzed by real-time monitoring using RTCA iCELLigence™. In addition, light and scanning electron microscopic images of the exposed cells were taken. Indirect immunofluorescence staining was performed to detect the extracellular matrix protein fibronectin.

RESULTS

In distilled water, DLS showed similar particles' range (171.9 nm- 2.7 µm) for both composites. In saliva, larger particles were detected (Filtek™ Supreme XTE: 243 nm-6,5 µm; ceram.x® universal: 204 nm- 4,6 µm). iCELLigence™ revealed similar results of cell growth parameters for HGK incubated with composite dust (≤ 5 µm) at different concentrations. The microscopic images indicated unaltered cell structures and formation of large agglomerates with high particle concentration (> 100 µg/mL). Exposure to composite dust resulted in upregulation of fibronectin expression.

SIGNIFICANCE

Grinding of dental composite materials generates dust particles of different sizes. The particle size distribution seems to be more influenced by the suspending medium than the material itself. While cell growth of HGK seem not to be affected by the particles, an upregulation of fibronectin in the intercellular space concomitant by increasing particle concentration may indicate an increase of cell migration/mobility.

Application of Inorganic Nanomaterials in Cultural Heritage Conservation, Risk of Toxicity, and Preventive Measures

Nanotechnology has allowed for significant progress in architectural, artistic, archaeological, or museum heritage conservation for repairing and preventing damages produced by deterioration agents (weathering, contaminants, or biological actions). This review analyzes the current treatments using nanomaterials, including consolidants, biocides, hydrophobic protectives, mechanical resistance improvers, flame-retardants, and multifunctional nanocomposites. Unfortunately, nanomaterials can affect human and animal health, altering the environment. Right now, it is a priority to stop to analyze its advantages and disadvantages. Therefore, the aims are to raise awareness about the nanotoxicity risks during handling and the subsequent environmental exposure to all those directly or indirectly involved in conservation processes. It reports the human-body interaction mechanisms and provides guidelines for preventing or controlling its toxicity, mentioning the current toxicity research of main compounds and emphasizing the need to provide more information about morphological, structural, and specific features that ultimately contribute to understanding their toxicity. It provides information about the current documents of international organizations (European Commission, NIOSH, OECD, Countries Normative) about worker protection, isolation, laboratory ventilation control, and debris management. Furthermore, it reports the qualitative risk assessment methods, management strategies, dose control, and focus/receptor relationship, besides the latest trends of using nanomaterials in masks and gas emissions control devices, discussing their risk of toxicity.

Characterization of dental dust particles and their pathogenicity to respiratory system: a narrative review

OBJECTIVES

Dental professionals are exposed to large amounts of dust particles during routine treatment and denture processing. This article provides a narrative review to investigate the most prevalent dust-related respiratory diseases among dental professionals and to discuss the effects of dental dust on human respiratory health.

MATERIALS AND METHODS

A literature search was performed in PubMed/Medline, Web of Science, and Embase for articles published between 1990 and 2022. Any articles on the occupational respiratory health effects of dental dust were included.

RESULTS

The characterization and toxicity evaluation of dental dust show a correlation between dust exposure and respiratory system injury, and the possible pathogenic mechanism of dust is to cause lung injury and abnormal repair processes. The combination use of personal protective equipment and particle removal devices can effectively reduce the adverse health effects of dust exposure.

CONCLUSIONS

Dental dust should be considered an additional occupational hazard in dental practice. However, clinical data and scientific evidence on this topic are still scarce. Further research is required to quantify dust in the dental work environment and clarify its pathogenicity and potential toxicological pathways. Nonetheless, the prevention of dust exposure should become a consensus among dental practitioners.

CLINICAL RELEVANCE

This review provides dental practitioners with a comprehensive understanding and preventive advice on respiratory health problems associated with dust exposure.

Assessment of occupational exposure to fine particulate matter in dental prosthesis laboratories in Kocaeli, Turkey

Dental prosthesis laboratories (DPLs) are among the workplaces where predominantly manual production takes place. In such working environments, during the manual manufacturing process, which involves fine smoothing and polishing of dental prostheses, fine particulate matter is released into the ambient air. In this study, the particulate matter (PM) concentrations and elemental content of the fine particles in the working ambient air were identified in six DPLs in Kocaeli, Turkey. PM_2.5 mass concentrations, measured in all the DPLs, ranged between 80.8 and 1645 μg/m³ (mean 414 ± 406). As a result of the analyses performed with an ICP-MS device (Perkin Elmer Elan®DRC-e), trace elements of Be, Cd, Hg, and, notably, Co, Cr, Mo, and Ni were found. The researchers calculated the excess lifetime cancer risks and total hazard indexes. The average total cancer risk for all the DPLs was 8 × 10^-3, which is higher than the acceptable limit of 1.0 × 10^-6, and the total hazard index was 187, which is greater than the acceptable limit of 1.0. Considering these high-level risks, the study concluded that there is a need for new production methods, and strict application of occupational health and safety measures, to reduce the fine particle exposure of the workers in the laboratories. In addition, there are prescribed limit values for particulate matter only for respirable particles in working environments. The establishment of limit values, especially for PM_2.5 concentrations, is important for the protection of the health of the employees.

Minimizing the aerosol-generating procedures in orthodontics in the era of a pandemic: Current evidence on the reduction of hazardous effects for the treatment team and patients

The purpose of this critical review is to list the sources of aerosol production during orthodontic standard procedure, analyze the constituent components of aerosol and their dependency on modes of grinding, the presence of water and type of bur, and suggest a method to minimize the quantity and detrimental characteristics of the particles comprising the solid matter of aerosol. Minimization of water-spray syringe utilization for rinsing is suggested on bonding related procedures, while temporal conditions as represented by seasonal epidemics should be considered for the decision of intervention scheme provided as a preprocedural mouth rinse, in an attempt to reduce the load of aerosolized pathogens. In normal conditions, chlorhexidine 0.2%, preferably under elevated temperature state should be prioritized for reducing bacterial counts. In the presence of oxidation vulnerable viruses within the community, substitute strategies might be represented by the use of povidone iodine 0.2%-1%, or hydrogen peroxide 1%. After debonding, extensive material grinding, as well as aligner related attachment clean-up, should involve the use of carbide tungsten burs under water cooling conditions for cutting efficiency enhancement, duration restriction of the procedure, as well as reduction of aerosolized nanoparticles. In this respect, selection strategies of malocclusions eligible for aligner treatment should be reconsidered and future perspectives may entail careful and more restricted utilization of attachment grips. For more limited clean-up procedures, such as grinding of minimal amounts of adhesive remnants, or individualized bracket debonding in the course of treatment, hand-instruments for remnant removal might well represent an effective strategy. Efforts to minimize the use of rotary instrumentation in orthodontic settings might also lead the way for future solutions. Measures of self-protection for the treatment team should never be neglected. Dressing gowns and facemasks with filter protection layers, appropriate ventilation and fresh air flow within the operating room comprise significant links to the overall picture of practice management. Risk management considerations should be constant, but also updated as new material applications come into play, while being grounded on the best available evidence.

Particulate Production and Composite Dust during Routine Dental Procedures. A Systematic Review with Meta-Analyses

Composite dust generation is most likely a continuous and daily procedure in dental practice settings. The aim of this systematic review was to identify, compile and evaluate existing evidence on interventions and composite material properties related to the production of aerosolized dust during routine dental procedures. Seven electronic databases were searched, with no limits, supplemented by a manual search, on 27 April 2020 for published and unpublished research. Eligibility criteria comprised of studies of any design, describing composite dust production related to the implementation of any procedure in dental practice. Study selection, data extraction and risk of bias (RoB) assessment was undertaken independently either in duplicate, or confirmed by a second reviewer. Random effects meta-analyses of standardized mean differences (SMD) with associated 95% confidence intervals (CIs) were employed where applicable. A total of 375 articles were initially identified, resulting in 13 articles being included in the qualitative synthesis, of which 5 contributed to meta-analyses overall. Risk of bias recordings ranged between low and high, pertaining to unclear/raising some concerns, in most cases. All types of composites, irrespective of the filler particles, released significant amounts of nano-sized particles after being ground, with potentially disruptive respiratory effects. Evidence supported increased % distribution of particles < 100 nm for nanocomposite Filtek Supreme XTE compared to both conventional hybrid Z100MP (SMD: 1.96, 95% CI: 0.85, 3.07; p-value; 0.001) and nano- hybrid Tetric EvoCeram (SMD: 1.62, 95% CI: 0.56, 2.68; p-value: 0.003). For cytotoxicity considerations of generated aerosolized particles, both nanocomposites Filtek Supreme XTE and nanohybrid GradiO revealed negative effects on bronchial epithelial cell viability, as represented by % formazan reduction at 330-400 μg/ml for 24 hours, with no recorded differences between them (SMD: 0.19; 95% CI: -0.17, 0.55; p-value: 0.30). Effective and more rigorous management of dental procedures potentially liable to the generation of considerable amounts of aerosolized composite dust should be prioritized in contemporary dental practice. In essence, protective measures for the clinician and the practices' personnel should also be systematically promoted and additional interventions may be considered in view of the existing evidence.

Cytotoxic and genotoxic potential of respirable fraction of composite dust on human bronchial cells

OBJECTIVE

To determine the cytotoxic and genotoxic potential of the respirable fraction of composite dust (<4 μm) on human bronchial epithelial cells.

METHODS

Composite sticks of three commercial dental composites (Filtek Supreme XTE, Grandio, Transbond XT) were ground in an enclosed plexiglass chamber with a rough dental bur (grain-size 100 μm) and the generated airborne respirable dust was collected in a personal cyclone on a teflon filter (pore size 5 μm). Immediately after particle collection, the dust was quantified gravimetrically and the particles were suspended in cell culturing medium. Next, human bronchial epithelial cells (16HBE14o-) were exposed to the suspensions (3 μg/ml-400 μg/ml). After 24 h, cell viability (WST-1 assay) and membrane integrity (LDH assay) were evaluated. Furthermore, the genotoxic effect of a sub-cytotoxic concentration (50 μg/ml) of composite dust was evaluated by the comet assay after 3 h exposure and cell cycle disturbances were analyzed by flow cytometry. Cellular uptake of particles was evaluated by transmission electronic microscope (TEM).

RESULTS

For all three tested composite materials, a decrease in metabolic activity of 10-35% was observed when the cells were exposed to the highest concentrations (100 μg/ml-400 μg/ml). Toxicity was partially linked to membrane disruption especially after 72 h exposure. All tested composites provoked a mild genotoxic effect after short-term exposure compared to the control groups. TEM revealed that respirable particles of all tested composites were taken up by the cells.

SIGNIFICANCE

The respirable fraction of composite dust only showed cytotoxic effects at the highest concentrations, whereas mild genotoxicity was observed after exposure to a sub-cytotoxic concentration.

The crux of positive controls - Pro-inflammatory responses in lung cell models

Positive controls are an important feature in experimental studies as they show the responsiveness of the model under investigation. An often applied reagent for a pro-inflammatory stimulus is the endotoxin lipopolysaccharide (LPS), which has been shown to induce a cytokine release by various cell cultures. The effect of LPS in monocultures of 16HBE14o-, a bronchial cell line, and of A549, an alveolar cell line, were compared in submerged and air-liquid interface cultures, as well as in co-cultures of the two epithelial cells with monocyte-derived macrophages and dendritic cells. The protein and mRNA levels of the two most relevant pro-inflammatory mediators, Tumor necrosis factor alpha (TNF) and Interleukin 8 (CXCL8), were measured after 4 h and 24 h exposure. 16HBE14o- cells alone as well as in co-cultures are non-responsive to an LPS stimulus, but an already increased basal expression of both pro-inflammatory mediators after prolonged time in culture was observed. In contrary, A549 in monocultures showed increased CXCL8 production at the gene and protein level after LPS exposure, while TNF-levels were below detection limit. In A549 co-cultured with immune cells both mediators were upregulated. This study shows the importance of a careful evaluation of the culture system used, including the application of positive controls. In addition, the use of co-cultures with immune cells more adequately reflects the inflammatory response upon exposure to toxicants.

Cytotoxic and biological effects of bulk fill composites on rat cortical neuron cells

The aim of this study was to investigate potential cellular responses and biological effects of new generation dental composites on cortical neuron cells in two different exposure times. The study group included five different bulk-fill flow able composites; Surefil SDR Flow, X-tra Base Flow, Venus Bulk Flow, Filtek Bulk Flow and Tetric-Evo Flow. They were filled in Teflon molds (Height: 4 mm, Width: 6 mm) and irradiated for 20 s. Cortical neuron cells were inoculated into 24-well plates. After 80% of the wells were coated, the 3 µm membrane was inserted and dental filling materials were added. The experiment was continued for 24 and 72 h. Cell viability measured by MTT assay test, total antioxidant and total oxidant status were examined using real assay diagnostic kits. The patterns of cell death (apoptosis) were analyzed using annexin V-FITC staining with flow cytometry. Β-defensins were quantitatively assessed by RT-PCR. IL-6, IL-8 and IL-10 cytokines were measured from the supernatants. All composites significantly affected analyses parameters during the exposure durations. Our data provide evidence that all dental materials tested are cytotoxic in acute phase and these effects are induced cellular death after different exposure periods. Significant cytotoxicity was detected in TE, XB, SS, FBF and VBF groups at 24 and 72 h, respectively.

Nanoparticles in dentistry

OBJECTIVE

Nanoparticles having a size from 1 to 100nm are present in nature and are successfully used in many products of daily life. Nanoparticles are also embedded per se or as byproducts from milling processes of larger filler particles in many dental materials.

METHODS AND RESULTS

Recently, possible adverse effects of nanoparticles have gained increased interest with the lungs being a main target organ. Exposure to nanoparticles in dentistry may occur in the dental laboratory, by processing gypsum type products or by grinding and polishing materials. In the dental practice virtually no exposure to nanoparticles occurs when handling unset materials. However, nanoparticles are produced by intraoral adjustment of set restorative materials through grinding/polishing regardless whether they contain nanoparticles or not. Nanoparticles may also be produced through wear of restorations or released from dental implants and they enter the environment when removing restorations. The risk for dental technicians is taken care of by legal regulations. Based on model worst case mass-based calculations, the exposure of dental practice personnel and patients to nanoparticles through intraoral grinding/polishing and wear is low to negligible. Accordingly, the additional risk due to nanoparticles exposure from present materials is considered to be low. However, more research is needed, especially on vulnerable groups (asthma or COPD). An assessment of risks for the environment is not possible due to the lack of data.

SIGNIFICANCE

Measures to reduce exposure to nanoparticles include intraorally grinding/polishing using water coolants, proper sculpturing to reduce the need for grinding and sufficient ventilation of treatment areas.

Interaction of rat alveolar macrophages with dental composite dust

BACKGROUND

Dental composites have become the standard filling material to restore teeth, but during the placement of these restorations, high amounts of respirable composite dust (<5 μm) including many nano-sized particles may be released in the breathing zone of the patient and dental operator. Here we tested the respirable fraction of several composite particles for their cytotoxic effect using an alveolar macrophage model system. ​METHODS: Composite dust was generated following a clinical protocol, and the dust particles were collected under sterile circumstances. Dust was dispersed in fluid, and 5-μm-filtered to enrich the respirable fractions. Quartz DQ12 and corundum were used as positive and negative control, respectively. Four concentrations (22.5 μg/ml, 45 μg/ml, 90 μg/ml and 180 μg/ml) were applied to NR8383 alveolar macrophages. Light and electron microscopy were used for subcellular localization of particles. Culture supernatants were tested for release of lactate dehydrogenase, glucuronidase, TNF-α, and H₂O₂.

RESULTS

Characterization of the suspended particles revealed numerous nano-sized particles but also many high volume particles, most of which could be removed by filtering. Even at the highest concentration (180 μg/ml), cells completely cleared settled particles from the bottom of the culture vessel. Accordingly, a mixture of nano- and micron-scaled particles was observed inside cells where they were confined to phagolysosomes. The filtered particle fractions elicited largely uniform dose-dependent responses, which were elevated compared to the control only at the highest concentration, which equaled a mean cellular dose of 120 pg/cell. A low inflammatory potential was identified due to dose-dependent release of H₂O₂ and TNF-α. However, compared to the positive control, the released levels of H₂O₂ and TNF-α were still moderate, but their release profiles depended on the type of composite.

CONCLUSIONS

Alveolar macrophages are able to phagocytize respirable composite dust particle inclusive nanoparticles. Since NR8383 cells tolerate a comparatively high cell burden (60 pg/cell) of each of the five materials with minimal signs of cytotoxicity or inflammation, the toxic potential of respirable composite dust seems to be low. These results are reassuring for dental personnel, but more research is needed to characterize the actual exposure and uptake especially of the pure nano fraction.