Toward optimizing dental implant performance: Surface characterization of Ti and TiZr implant materials

Influence of the Surface Topography of Titanium Dental Implants on the Behavior of Human Amniotic Stem Cells

The dental implant surface plays a crucial role in osseointegration. The topography and physicochemical properties will affect the cellular functions. In this research, four distinct titanium surfaces have been studied: machined acting (MACH), acid etched (AE), grit blasting (GBLAST), and a combination of grit blasting and subsequent acid etching (GBLAST + AE). Human amniotic mesenchymal (hAMSCs) and epithelial stem cells (hAECs) isolated from the amniotic membrane have attractive stem-cell properties. They were cultured on titanium surfaces to analyze their impact on biological behavior. The surface roughness, microhardness, wettability, and surface energy were analyzed using interferometric microscopy, Vickers indentation, and drop-sessile techniques. The GBLAST and GBLAST + AE surfaces showed higher roughness, reduced hydrophilicity, and lower surface energy with significant differences. Increased microhardness values for GBLAST and GBLAST + AE implants were attributed to surface compression. Cell viability was higher for hAMSCs, particularly on GBLAST and GBLAST + AE surfaces. Alkaline phosphatase activity enhanced in hAMSCs cultured on GBLAST and GBLAST + AE surfaces, while hAECs showed no mineralization signals. Osteogenic gene expression was upregulated in hAMSCs on GBLAST surfaces. Moreover, α2 and β1 integrin expression enhanced in hAMSCs, suggesting a surface-integrin interaction. Consequently, hAMSCs would tend toward osteoblastic differentiation on grit-blasted surfaces conducive to osseointegration, a phenomenon not observed in hAECs.

Influence of Topography and Composition of Commercial Titanium Dental Implants on Cell Adhesion of Human Gingiva-Derived Mesenchymal Stem Cells: An In Vitro Study

The topography and composition of dental implant surfaces directly impact mesenchymal cell adhesion, proliferation, and differentiation, crucial aspects of achieving osseointegration. However, cell adhesion to biomaterials is considered a key step that drives cell proliferation and differentiation. The aim of this study was to characterize characterize the topography and composition of commercial titanium dental implants manufactured with different surface treatments (two sandblasted/acid-etched (SLA) (INNO Implants, Busan, Republic of Korea; BioHorizonsTM, Oceanside, CA, USA) and two calcium phosphate (CaP) treated (Biounite®, Berazategui, Argentina; Zimmer Biomet, Inc., Warsaw, IN, USA)) and to investigate their influence on the process of cell adhesion in vitro. A smooth surface implant (Zimmer Biomet, Inc.) was used as a control. For that, high-resolution methodologies such as scanning electron microscopy (SEM), X-ray dispersive spectroscopy (EDX), laser scanning confocal microscopy (LSCM), and atomic force microscopy (AFM) were employed. Protein adsorption and retromolar gingival mesenchymal stem cells (GMSCs) adhesion to the implant surfaces were evaluated after 48 h. The adherent cells were examined by SEM and LSCM for morphologic and quantitative analyses. ANOVA and Tukey tests (α = 0.05) were employed to determine statistical significance. SEM revealed that INNO, BioHorizonsTM, and Zimmer implants have an irregular surface, whereas Biounite® has a regular topography consisting of an ordered pattern. EDX confirmed a calcium and phosphate layer on the Biounite® and Zimmer surfaces, and AFM exhibited different roughness parameters. Protein adsorption and cell adhesion were detected on all the implant surfaces studied. However, the Biounite® implant with CaP and regular topography showed the highest protein adsorption capacity and density of adherent GMSCs. Although the Zimmer implant also had a CaP treatment, protein and cell adhesion levels were lower than those observed with Biounite®. Our findings indicated that the surface regularity of the implants is a more determinant factor in the cell adhesion process than the CaP treatment. A regular, nanostructured, hydrophilic, and moderately rough topography generates a higher protein adsorption capacity and thus promotes more efficient cell adhesion.

Advancing dental implants: Bioactive and therapeutic modifications of zirconia

Zirconium-based implants have gained popularity in the dental implant field owing to their corrosion resistance and biocompatibility, attributed to the formation of a native zirconia (ZrO₂) film. However, enhanced bioactivity and local therapy from such implants are desirable to enable the earlier establishment and improved long-term maintenance of implant integration, especially in compromised patient conditions. As a result, surface modification of zirconium-based implants have been performed using various physical, chemical and biological techniques at the macro-, micro-, and nano-scales. In this extensive review, we discuss and detail the development of Zr implants covering the spectrum from past and present advancements to future perspectives, arriving at the next generation of highly bioactive and therapeutic nano-engineered Zr-based implants. The review provides in-depth knowledge of the bioactive/therapeutic value of surface modification of Zr implants in dental implant applications focusing on clinical translation.

The molecular pathway triggered by zirconia in endothelial cells involves epigenetic control

The requirement to achieve natural looking restorations is one of the most challenging aspects in dentistry. Although zirconia has provided new opportunities for achieving superior aesthetics and physicochemical outcomes, very little has been achieved for its cellular and molecular performance, especially considering angiogenesis and osteogenesis. As angiogenesis is a secondary event and concomitant to osteogenesis, an indirect effect of dental implant on endothelial cells could be the release of active molecules such as those already reported affecting osteoblasts. To better address this issue, we challenged human endothelial cells (HUVECs) with zirconia-conditioned medium up to 72 h to allow analysis specific gene expression and protein pattern of mediators of epigenetic machinery in full. Our data shows involvement of zirconia in triggering intracellular signaling through MAPK-ERK activation, leading the signal to activate histone deacetylase HDAC6 likely with concomitant well-modulated DNA methylation profile by DNMTs and TETs. These signaling pathways seem to culminate in cytoskeleton rearrangement of endothelial cells, an important prerequisite to cell migration expected in angiogenesis. Collectively, this study demonstrates for the first time epigenetic-related molecular mechanism involved in endothelial cells responding to zirconia, revealing a repertoire of signaling molecules capable of executing the reprogramming process of gene expression, which are necessary to drive cell proliferation, migration, and consequently angiogenesis. This set of data can further studies using gene editing approaches to better elucidate functional roles.

The moonlighting activities of dihydrolipoamide dehydrogenase: Biotechnological and biomedical applications

Dihydrolipoamide dehydrogenase (DLDH) is a homodimeric flavin-dependent enzyme that catalyzes the NAD⁺ -dependent oxidation of dihydrolipoamide. The enzyme is part of several multi-enzyme complexes such as the Pyruvate Dehydrogenase system that transforms pyruvate into acetyl-co-A. Concomitantly with its redox activity, DLDH produces Reactive Oxygen Species (ROS), which are involved in cellular apoptotic processes. DLDH possesses several moonlighting functions. One of these is the capacity to adhere to metal-oxides surfaces. This was first exemplified by the presence of an exocellular form of the enzyme on the cell-wall surface of Rhodococcus ruber. This capability was evolutionarily conserved and identified in the human, mitochondrial, DLDH. The enzyme was modified with Arg-Gly-Asp (RGD) groups, which enabled its interaction with integrin-rich cancer cells followed by "integrin-assisted-endocytosis." This allowed harnessing the enzyme for cancer therapy. Combining the TiO₂ -binding property with DLDH's ROS-production, enabled us to develop several medical applications including improving oesseointegration of TiO₂ -based implants and photodynamic treatment for melanoma. The TiO₂ -binding sites of both the bacterial and human DLDH's were identified on the proteins' molecules at regions that overlap with the binding site of E3-binding protein (E3BP). This protein is essential in forming the multiunit structure of PDC. Another moonlighting activity of DLDH, which is described in this Review, is its DNA-binding capacity that may affect DNA chelation and shredding leading to apoptotic processes in living cells. The typical ROS-generation by DLDH, which occurs in association with its enzymatic activity and its implications in cancer and apoptotic cell death are also discussed.

Role of New Hydrophilic Surfaces on Early Success Rate and Implant Stability: 1-Year Post-loading Results of a Multicenter, Split-Mouth, Randomized Controlled Trial

OBJECTIVE

 To compare early implant failure and implant stability of one-stage Hiossen ET III implants with its new hydrophilic (NH) surface, compared with Hiossen ET III implants with the sandblasted and acid-etched (SA) surface at 1-year follow-up.

MATERIALS AND METHODS

 This study was designed as a split-mouth, multicenter randomized controlled trial aimed to compare SA surface implants (SA group) and NH surface, (NH group). Outcomes were implant and prosthetic survival rates, complications, the insertion torque at implant placement, and implant stability quotient (ISQ) values.

RESULTS

 Twenty-nine patients (mean age 59.9 ± 11.3 years) were treated and followed up to 1 year after loading. No patient dropped out. Fifty-eight implants (29 SA group and 29 NH group) were placed. No implants or prostheses failed and no complications were experienced during follow-up. The mean insertion torque was 40.5 ± 3.23 (38.17-41.83) Ncm in the SA group and 40.48 ± 3.49 (38.02-41.98) Ncm in the NH group (p = 0.981). There was a statistically significant difference at the second week (T2) with higher values in the NH group (p = 0.041). Similar results were found in the maxilla (p = 0.045), but not in the mandible (p = 0.362). A positive correlation was found between initial insertion torque and ISQ with higher value in the NH group (0.73 vs. 0.66).

CONCLUSIONS

 NH implants are a viable alternative to SA surface, as they seem to avoid the ISQ drop during the bone remodeling phase.

The Impact of Bioactive Surfaces in the Early Stages of Osseointegration: An In Vitro Comparative Study Evaluating the HAnano® and SLActive® Super Hydrophilic Surfaces

There is an increased effort on developing novel and active surfaces in order to accelerate their osteointegration, such as nanosized crystalline hydroxyapatite coating (HAnano®). To better understand the biological behavior of osteoblasts grown on HAnano® surface, the set of data was compared with SLActive®, a hydrophilic sandblasted titanium surface. Methodologically, osteoblasts were seeded on both surfaces up to 72 hours, to allow evaluating cell adhesion, viability, and set of genes encoding proteins related with adhesion, proliferation, and differentiation. Our data shows HAnano® displays an interesting substrate to support cell adhesion with typical spread morphologic cells, while SLActive®-adhering cells presented fusiform morphology. Our data shows that the cellular adhesion mechanism was accompanied with upexpression of integrin β1, Fak, and Src, favoring the assembling of focal adhesion platforms and coupling cell cycle progression (upmodulating of Cdk2, Cdk4, and Cdk6 genes) in response to HAnano®. Additionally, both bioactive surfaces promoted osteoblast differentiation stimulus, by activating Runx2, Osterix, and Alp genes. Although both surfaces promoted Rankl gene expression, Opg gene expression was higher in SLActive® and this difference reflected on the Rankl/Opg ratio. Finally, Caspase1 gene was significantly upmodulated in response to HAnano® and it suggests an involvement of the inflammasome complex. Collectively, this study provides enough evidences to support that the nanohydroxyapatite-coated surface provides the necessary microenvironment to drive osteoblast performance on dental implants and these stages of osteogenesis are expected during the early stages of osseointegration.

The Trends of TiZr Alloy Research as a Viable Alternative for Ti and Ti16 Zr Roxolid Dental Implants

Despite many discussions about Ti versus Zr, Ti remains the golden standard for dental implants. With the extended use of implants, their rejection in peri-implantitis due to material properties is going to be an important part of oral health problems. Extended use of implants leading to a statistical increase in implant rejection associated with peri-implantitis raises concerns in selecting better implant materials. In this context, starting in the last decade, investigation and use of TiZr alloys as alternatives for Ti in oral dentistry became increasingly more viable. Based on existing new results for Ti16Zr (Roxolid) implants and Ti50Zr alloy behaviour in oral environments, this paper presents the trends of research concerning the electrochemical stability, mechanical, and biological properties of this alloy with treated and untreated surfaces. The surface treatments were mostly performed by anodizing the alloy in various conditions as a non-sophisticated and cheap procedure, leading to nanostructures such as nanopores and nanotubes. The drug loading and release from nanostructured Ti50Zr as an important perspective in oral implant applications is discussed and promoted as well.

Proteomic profile of the saliva and plasma protein layer adsorbed on Ti-Zr alloy: the effect of sandblasted and acid-etched surface treatment

Titanium-zirconium (Ti-Zr) alloy has been widely used as a biomaterial for implant devices, and it is commonly treated by sandblasting followed by acid etching (SLA) to improve biological responses. Although protein adsorption is the first biological response, the effect of this SLA treatment on the proteomic profile of proteins adsorbed from saliva and blood plasma has not been tested. In this study, the proteomic profile was evaluated by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Streptococcus sanguinis was used to test whether the protein layer affects bacterial adhesion. SLA treatment affected the proteomic profile, showing exclusive proteins adsorbed from saliva (14) and plasma (3). However, both groups exhibited close patterns of intensity for common proteins, molecular functions and biological processes mediated by proteins. Interestingly, Ti-Zr_SLA showed higher bacterial adhesion (∼1.9 fold over) for the surface coated with plasma proteins. Therefore, SLA treatment of Ti-Zr alloy changed the proteomic profile, which may affect bacterial adhesion.

Interaction of a tripeptide with titania surfaces: RGD adsorption on rutile TiO2(110) and model dental implant surfaces

The adsorption of peptides on metal oxides is an area of significant interest, both fundamentally and in a number of technologically important areas. These range from the integration of biomaterials in the body, to denaturation of protein therapeutics and the use of biomolecules and bioinspired materials in synthesis and stabilization of novel nanomaterials. Here we present a study of the tripeptide arginylglycylaspartic acid (RGD) on the surfaces of vacuum-prepared single crystalline TiO₂(110), pyrocatechol-capped TiO₂(110), and model SLA and SLActive dental implant samples. X-ray Photoelectron Spectroscopy and Scanning Tunneling Microscopy show that the RGD adsorption mode on the single crystal is consistent with bonding through the deprotonated carboxylate groups of the peptide to surface Ti atoms of the substrate. Despite the increased hydrophobicity of the pyrocatechol-capped TiO₂(110) surface RGD adsorption from solution increases following this surface treatment. RGD adsorption on SLA and SLActive surfaces shows that the SLActive surface has a greater uptake of RGD. The RGD uptake on the pyrocatechol capped single crystal and the model implant surfaces suggest that the ease with which surface contaminant hydrocarbons are removed from the surface has a greater influence on peptide adsorption than hydrophobicity/hydrophilicity of the surface.

Does nanoscale porous titanium coating increase lumbar spinal stiffness of an interbody fusion cage? An in vivo biomechanical analysis in an ovine model

BACKGROUND

Quantitative objective measures to determine fusion achievement further enable the comparison of new technologies, such as interbody cage surface enhancement. Our aims were to compare in vivo biomechanical responses of ovine L4/5 lumbar motion segments with two cages: 1) Polyetheretherketone or 2) Polyetheretherketone with a nanosurfaced titanium porous scaffold from Nanovis, Inc.

METHODS

Fourteen Merino sheep randomly received either 1) standard Polyetheretherketone cage or 2) Nanocoated Polyetheretherketone cage at L4/L5 with autologous bone graft. At baseline and one-year follow-up, dynamic spinal stiffness was quantified in vivo using a validated mechanical assessment at 2 Hz, 6 Hz, and 12 Hz. The dorsoventral secant stiffness (k_y = force/displacement, N/mm) and L4-L5 accelerations were determined at each frequency. A repeated measures analysis of variance with Bonferonni correction was used to evaluate within and between group differences among the biomechanical variables.

FINDINGS

Both implants increased spinal stiffness at 2 Hz (21 and 39%, respectively, p < .005), and at 6 Hz (12 and 27%, p < .0001). Significantly greater spinal stiffness was observed with Nanocoated Polyetheretherketone at one-year for both frequencies (p < .05). No significant differences were observed at 12 Hz within or between groups. L4-L5 dorsoventral accelerations were significantly decreased one year following cage placement only with Nanocoated Polyetheretherketone (p < .05) and greater reductions in acceleration were observed with Nanocoated Polyetheretherketone compared to standard Polyetheretherketone (p < .05).

INTERPRETATION

Both cages increased spinal stiffness, yet, nanosurfaced cages resulted in greater spinal stiffness changes and decreases in L4-L5 accelerations. These findings may assist in clinical decision making and post-operative recovery strategies.

Do the New Hydrophilic Surface Have Any Influence on Early Success Rate and Implant Stability during Osseointegration Period? Four-Month Preliminary Results from a Split-Mouth, Randomized Controlled Trial

OBJECTIVE

The objective of this study is to compare the implant stability of Hiossen ET III implants with its new hydrophilic (NH) surface and Hiossen ET III implants with the sandblasted and acid-etched (SA) surface.

MATERIALS AND METHODS

Patients required at least two teeth to be rehabilitated with a fixed, implant-supported restoration, consecutively enrolled. Patients randomly received SA surface implants (SA group) or SA implants with a newly developed bioabsorbable apatite nanocoating (NH group). Outcome measures were implant and prosthetic survival rate, complications, insertion torque, and implant stability quotient (ISQ) measured at implant placement and every week up to 8 weeks after implant placement. Comparison between groups was made by unpaired t-test, while the comparison between each follow-up will be made by paired t-tests to detect any change during the follow-up. Complications and failures were compared using Fisher's exact test.

RESULTS

A total of 14 patients were treated with 28 implants (14 SA and 14 NH). No implant and prosthesis failed 4 months after implant placement. No complications were experienced. At the 2nd week after implants placement, two implants in the SA group showed discontinuous measurements versus none in the NH group (p = 0.4815). Implants unscrewed during ISQ measurements and were rescrewed. Data recording stopped for 6 weeks. Both implants osseointegrated without any further complication. The NH implants did not show physiological ISQ decrease between 2nd and 4th week after implant placement, showing a more even pattern of ISQ values compared with SA implants (77.1 ± 4.6 vs. 72.9 ± 11.5; difference: 4.2 ± 12.1; p = 0.258). High ISQ values were found in both groups at each time point.

CONCLUSIONS

NH implants are a viable alternative to SA surface, as they seem to avoid the ISQ drop during the remodeling phase.

Biological responses of human bone mesenchymal stem cells to Ti and TiZr implant materials

BACKGROUND

Titanium-zirconium alloy (TiZr1317) is a new material used for biological implants. There are several studies on the effects of TiZr implants on the biological characteristics of human bone mesenchymal stem cells (hBMSCs).

PURPOSE

The purpose of this study was to investigate the biological responses of hBMSCs to implant holes affected by the physicochemical properties of oral implants (Ti_SLA , Ti_SLActive , TiZr_SLA , and TiZr_SLActive ).

MATERIALS AND METHODS

Grade 4 Ti and TiZr (13-17% Zr) substrates were modified by sand-blasted large-grit acid-etched (SLA) or hydrophilic sand-blasted large-grit acid-etched (SLActive), resulting in four types of surface with complex microstructures corresponding to the commercially-available implants SLA, RoxolidSLA, SLActive, and RoxolidSLActive (Institute Straumann AG, Basel, Switzerland). Physicochemical properties were detected and the biological responses of hBMSCs were observed.

RESULTS

Surface morphology characterization by scanning electron microscopy and atomic force microscopy revealed differences between the four groups. SLA_ctive had higher surface energy/wettability than SLA, indicating that increased surface energy/wettability can promote the absorption of osteogenic proteins and enhance osseointegration. hBMSCs seeded on SLActive substrates exhibited better performance in terms of cell attachment, proliferation and osteoblastic differentiation than cells seeded on SLA.

CONCLUSION

Because of their more suitable physicochemical properties, Ti_SLActive and TiZr_SLActive materials demonstrated more pronounced effects on the biological responses of hBMSCs compared with Ti_SLA and TiZr_SLA .

[Study on antibacterial properties of titanium metallic surface due to synergistic action of micro/nano-structure and antimicrobial peptides]

Objective

To investigate the effects of micro/nano-structure and antimicrobial peptides (AMPs) on antibacterial properties for titanium (Ti) metal surface.

Methods

Ti disks were treated via sandblasted large-grit acid-etched (SLA) and alkali-heat treatment (AHT) to build the micor/nano-structure, on which AMPs were spin-coated with a certain amount (10, 30, 50, 70, and 90 μg). Scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to observe the surface structure and characterize the surface elements (i.e. contents of C, N, O, and Ti). Ti disks loaded with AMPs of difference amounts were co-cultured with Staphylococcus aureus ( S. aureus) for 24 hours. After that, the formation and dimension of antibacterial circle were measured. Furthermore, the Ti disks treated with different approaches (untreated, SLA treatment, SLA+THA treatment, and loaded with 90 μg AMPs) were co-cultured with S. aureus and Escherichia coli ( E.coli) for 3 hours, bacterial adhesion on the disks were evaluated by using SEM. The antibacterial performances in solution were quantitatively evaluated by immersing the Ti disks in bacterial solutions and measuring the absorbance ( A) values.

Results

It was found that the nanoporous structure could be easily constructed by SLA+AHT approach. After spin-coating AMPs, the nanopores with the diameter less than 200 nm were almost covered. According to the element analysis, with the increase of AMPs, the C content gradually increased; the N content was not detected until AMPs amount reached 70 μg on the disks. The diameter of antibacterial circle clearly depended on the AMPs amount. The Ti disks loaded with 90 μg AMPs had significantly larger antibacterial circles than the other Ti disks ( P<0.05). Based on the SEM observation, the Ti disks loaded with 90 μg AMPs has the least bacterial attachment compared with the other Ti disks ( P<0.05). The A value of bacterial solution immersed with the Ti disks loaded with 90 μg AMPs was much lower than the other Ti disks ( P<0.05).

Conclusion

The approach of micro/nano-structure and AMPs can improve the antibacterial properties of Ti metal surface.

Surface characteristics of dental implants: A review

OBJECTIVES

During the last decades, several changes of paradigm have modified our view on how biomaterials' surface characteristics influence the bioresponse. After becoming aware of the role of a certain microroughness for improved cellular contact and osseointegration of dental titanium implants, the likewise important role of surface energy and wettability was increasingly strengthened. Very recently, synergistic effects of nanoscaled topographical features and hydrophilicity at the implant/bone interface have been reported.

METHODS

Questions arise about which surface roughness and wetting data are capable to predict the bioresponse and, ultimately, the clinical performance. Current methods and approaches applied for topographical, wetting and surface energetic analyses are highlighted. Current knowledge of possible mechanisms explaining the influence of roughness and hydrophilicity at the biological interface is presented.

RESULTS

Most marketed and experimental surfaces are based on commonly available additive or subtractive surface modifying methods such as blasting, etching or anodizing. Different height, spatial, hybrid and functional roughness parameters have been identified as possible candidates able to predict the outcome at hard and soft tissue interfaces. Likewise, hydrophilic implants have been proven to improve the initial blood contact, to support the wound healing and thereby accelerating the osseointegration.

SIGNIFICANCE

There is clear relevance for the influence of topographical and wetting characteristics on a macromolecular and cellular level at endosseous implant/biosystem interfaces. However, we are still far away from designing sophisticated implant surfaces with the best possible, selective functionality for each specific tissue or cavity interface. Firstly, because our knowledge of the respective surface related reactions is at best fragmentary. Secondly, because manufacturing of multi-scaled complex surfaces including distinct nanotopographies, wetting properties, and stable cleanliness is still a technical challenge and far away from being reproducibly transferred to implant surfaces.