Nucleation efficacy and flexural strength of novel leucite glass-ceramics

Effect of TiO2 and CaO Addition on the Crystallization and Flexural Strength of Novel Leucite Glass-Ceramics

The aim of this study was to investigate the effects of TiO2/CaO addition on the crystallization and flexural strength of leucite glass-ceramics (GC). Synthesis of translucent and high strength GCs is important for the development of aesthetic and durable dental restorations. To achieve this, experimental aluminosilicate glasses (1-3 mol% TiO2 and CaO (B1, B2, B3)) were melted in a furnace to produce glasses. Glasses were ball milled, screened and heat treated via crystallization heat treatments, and characterized using XRD, differential scanning calorimetry, dilatometry, SEM and biaxial flexural strength (BFS). Increasing nucleation hold time (1-3 h) led to a reduction in crystallite number for B2 and B3 GC, and significant differences in leucite crystal size at differing nucleation holds within and across test groups (p < 0.05). A high area fraction of leucite crystals (55.1-60.8%) was found in the GC, with no matrix microcracking. Changes in the crystal morphology were found with higher TiO2/CaO addition. Mean BFS of the GC were 211.2-234.8 MPa, with significantly higher Weibull modulus (m = 18.9) for B3 GC. Novel glass compositions enriched with TiO2/CaO led to crystallization of leucite GC of high aspect ratio, with high BFS and reliability. The study's findings suggest a potential high performance translucent leucite GC for use in the construction of dental restorations.

An engineering perspective of ceramics applied in dental reconstructions

The demands for dental materials continue to grow, driven by the desire to reach a better performance than currently achieved by the available materials. In the dental restorative ceramic field, the structures evolved from the metal-ceramic systems to highly translucent multilayered zirconia, aiming not only for tailored mechanical properties but also for the aesthetics to mimic natural teeth. Ceramics are widely used in prosthetic dentistry due to their attractive clinical properties, including high strength, biocompatibility, chemical stability, and a good combination of optical properties. Metal-ceramics type has always been the golden standard of dental reconstruction. However, this system lacks aesthetic aspects. For this reason, efforts are made to develop materials that met both the mechanical features necessary for the safe performance of the restoration as well as the aesthetic aspects, aiming for a beautiful smile. In this field, glass and high-strength core ceramics have been highly investigated for applications in dental restoration due to their excellent combination of mechanical properties and translucency. However, since these are recent materials when compared with the metal-ceramic system, many studies are still required to guarantee the quality and longevity of these systems. Therefore, a background on available dental materials properties is a starting point to provoke a discussion on the development of potential alternatives to rehabilitate lost hard and soft tissue structures with ceramic-based tooth and implant-supported reconstructions. This review aims to bring the most recent materials research of the two major categories of ceramic restorations: ceramic-metal system and all-ceramic restorations. The practical aspects are herein presented regarding the evolution and development of materials, technologies applications, strength, color, and aesthetics. A trend was observed to use high-strength core ceramics type due to their ability to be manufactured by CAD/CAM technology. In addition, the impacts of COVID-19 on the market of dental restorative ceramics are presented.

Antibacterial activity improvement of dental glass-ceramic by incorporation of AgVO3 nanoparticles

OBJECTIVE

This study aimed to investigate the role of the incorporation of an antibacterial nanoceramic (AgVO₃) on the properties of a restorative dental glass-ceramic.

METHOD

A commercially available restorative glass-ceramic, commonly designated as porcelain (IPS d.SIGN) was functionalized with an antibacterial agent (nanostructured β-AgVO₃), synthesized by a hydrothermal route. Both functionalized and pristine samples were processed according to the manufacturer's instructions. All samples were characterized by X-ray diffraction, Rietveld refinement, particle size distribution, Scanning Electron Microscopy, chemical solubility, and Inductively Coupled Plasma Spectroscopy. Their antibacterial potential (Mueller-Hinton test) was analyzed against gram-positive (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli).

RESULTS

The commercial glass-ceramic showed leucite (KAlSi₂O₆) as the only detectable crystalline phase, and, for both strains, no antibacterial activity could be detected in the Mueller-Hinton agar plates test. A monophasic, needle-shaped, and nanometric β-AgVO₃ powder was successfully synthesized by a simple hydrothermal route. After thermal treatment, glass-ceramic samples containing different percentages of β-AgVO₃ showed a second crystalline phase of microline [K_0.95(AlSi₃O₈)]. For modified samples, inhibition halos were easily visible on the Mueller-Hinton test, which ranged from 11.1 ± 0.5 mm to 16.6 ± 0.5 mm and 12.7 ± 0.3 mm to 15.5 ± 0.3 mm in the S. aureus and E.coli cultures, respectively, showing that the halos formed were dose-dependent. Also, increasing the percentage of β-AgVO₃ promoted a significant increase in chemical solubility, from 72 µg/cm² (samples with 1 wt% of β-AgVO₃) to 136 µg/cm² (samples with 2 wt% of β-AgVO₃), which was associated with the silver and vanadium ions released from the glass matrix.

SIGNIFICANCE

Our in vitro results indicate that IPS d.SIGN, as most of the dental glass-ceramics, do not exhibit antibacterial activity per se. Nonetheless, in this concept test, we demonstrated that it is possible to modify dental veneering materials giving them antibacterial properties by adding at least 2 wt% of β-AgVO₃, a nanomaterial easily synthesized by a simple route.

Flexural strengths, failure load, and hardness of glass-ceramics for dental applications

STATEMENT OF PROBLEM

Glass-ceramics are often selected for use in dental restorations based upon advertised flexural strengths obtained from standardized tests on prefabricated specimens (bars and disks); these may not accurately reflect their performance in dental applications.

PURPOSE

The purpose of this in vitro study was to determine and compare 4-point flexural strength, biaxial flexural strength, hardness, and crown failure loads for 3 commercially available glass-ceramics.

MATERIAL AND METHODS

Specimens were pressed and prepared from 3 brands of glass-ceramics: Celtra (CEL), IPS e.max (EMA), and Lisi (LIS). Rectangular bars, circular disks, and fully contoured crowns were created (n=15 specimens per glass-ceramic, 45 specimens per geometry, totaling 135 specimens). Disks were tested for biaxial flexural strength by using a piston-on-3-ball (POB) test, while bars were tested for 4-point flexural strength by using 4-point bending (4PB) and Vickers hardness (VH) tests. Crown failure loads were assessed in "crunch-the-crown" (CTC) tests. The results were analyzed by using general linear modeling, the Pearson correlation coefficient, and Weibull analysis.

RESULTS

The general linear modeling revealed significant differences (P<.05) in the failure load for crown specimens (EMA>LIS>CEL), the 4-point flexural strength (EMA>LIS>CEL), and the biaxial flexural strength (EMA>LIS=CEL). The disk specimens had higher flexural strengths than the bar specimens for CEL and EMA materials. LIS had a higher Weibull modulus than EMA and CEL for bar and crown specimens. CEL had a higher Weibull modulus than LIS and EMA for disk specimens. There was no correlation among the VH (R²=0.86 and P=.24), biaxial flexural strength (R²=0.84 and P=.26), and crown failure load. However, there was a high correlation between the failure load (crown specimens) and 4-point flexural strength (bar specimens) (R²=0.99 and P=.03).

CONCLUSIONS

The 4-point flexural strength correlated significantly with crown failure load.