Enhanced effect of nano-monetite hydrosol on dentin remineralization and tubule occlusion

Biomimetic non-collagenous proteins-calcium phosphate complex with superior osteogenesis via regulating macrophage IL-27 secretion

Traumatic defects or non-union fractures presents a substantial challenge in the fields of tissue engineering and regenerative medicine. Although synthetic calcium phosphate-based biomaterials (CaPs) such as dibasic calcium phosphate anhydrate (DCPA) are commonly employed for bone repair, their inadequate cellular immune responses significantly impede sustained degradation and optimal osteogenesis. In this study, drawing inspiration from the key structure of an acidic non-collagenous protein-CaP complex (ANCPs-CaP) essential for natural bone formation, we prepared biomimetic mineralized dibasic calcium phosphate (MDCPA). This preparation utilized plant-derived non-collagenous protein Zein as the organic template and acidic artificial saliva as the mineralization medium. Physicochemical property analysis revealed that MDCPA is a complex of Zein and DCPA, which mimics the composite of the natural ANCP-CaP. Moreover, MDCPA exhibited enhanced biodegradability and osteogenic potential. Mechanistic insight revealed that MDCPA can be phagocytized and degraded by macrophages via the FCγRIII receptor, leading to the release of interleukin 27 (IL-27), which promotes osteogenic differentiation by osteoimmunomodulation. The critical role of IL-27 in osteogenesis is further confirmed using IL-27 gene knockout mice. Additionally, MDCPA demonstrates effective healing of critical-sized defects in rat cranial bones within only 4 w, providing a promising basis and valuable insights for critical-sized bone defects regeneration.

Nano hydroxyapatite-silica with a core-shell structure for long-term management of dentin hypersensitivity

Teeth undergo continuous demineralization and remineralization influenced by dietary acid and saliva. Excessive dietary acid attack disrupts this balance, exposing dentin tubules and causing dental hypersensitivity (DH). Due to low acid resistance, traditional anti-DH regents such as calcium phosphate minerals fail in long-term occlusion of dentin tubules, resulting in recurrent attacks of DH. Hence, we fabricate nano hydroxyapatite (nHA)-silica (nHASi) with a core-shell structure that can not only fill in the dentin tubules, releasing Ca2+ and PO4 3- from the nHA core for biomineralization, but also exhibit remarkable acid resistance due to the silica shell. Our study demonstrates a continuous growth of hydroxyapatite (HA) nanocrystals within nHASi during cyclic de/remineralization. When applied with toothpaste, nHASi gradually enhances dentin tubule occlusion over de/remineralization cycles. Additionally, extracts of nHASi exhibit excellent cytocompatibility and odontogenic inductivity in vitro. This work provides a paradigm for developing effective anti-allergic materials for the long-term management of DH.

A monetite/amorphous silica complex for long-term dentine hypersensitivity treatment through the acid stability and mineralization promoting effect of silica

Dentine hypersensitivity (DH) is often related to the exposure of dentin tubules. Mineral particles, such as hydroxyapatite and bioactive glass, can provide calcium and phosphate ions to temporarily block dentin tubules via the biomineralization process, serving as feasible alternatives for DH treatment. However, due to the acidic microenvironment caused by dietary acids, these particles are easily eroded and dissolved, making it difficult to achieve efficient dentin tubule occlusion. Given the significant stability of silica in dietary acids and its excellent ability to bond with calcium and phosphate ions to form mineralized hydroxyapatite, we proposed to develop a micron-sized monetite/amorphous silica complex (MMSi) hydrosol to effectively seal the exposed dentin tubules. In this study, we hypothesized that the MMSi hydrosol could tolerate acid erosion and concurrently provide active sites for the calcium and phosphate ions to promote biomineralization in comparison to a micron-sized monetite (MM) hydrosol. Hence, the composition and microstructure including the surface morphology, silica content and phase composition of MMSi were investigated to verify the presence of silica. The results of the ion release and in vitro biomineralization process indicated that silica did not hinder the calcium and phosphate ion release and the formation of hydroxyapatite via the biomineralization process. The acid-resistant test suggested that the MMSi hydrosol exhibited a significantly slower corrosion rate than the MM hydrosol when treated with citric acid. Notably, the silica in the MMSi hydrosol retained the ability to induce the nucleation and crystallization of hydroxyapatite during de/remineralization processes. Finally, the MMSi hydrosol was mixed with commercialized toothpaste to explore its efficacy in dentin tubule occlusion via cycling de/remineralization processes. As a result, compared to the MM hydrosol, the toothpaste containing the MMSi hydrosol presented excellent acid-resistant ability and dentin tubule occlusion outcomes, which indicated that the MMSi hydrosol could be a potential promise in the long-term treatment of DH.

Unraveling Nanomaterials in Biomimetic Mineralization of Dental Hard Tissue: Focusing on Advantages, Mechanisms, and Prospects

The demineralization of dental hard tissue imposes considerable health and economic burdens worldwide, but an optimal method that can repair both the chemical composition and complex structures has not been developed. The continuous development of nanotechnology has created new opportunities for the regeneration and repair of dental hard tissue. Increasingly studies have reported that nanomaterials (NMs) can induce and regulate the biomimetic mineralization of dental hard tissue, but few studies have examined how they are involved in the different stages, let alone the relevant mechanisms of action. Besides their nanoscale dimensions and excellent designability, NMs play a corresponding role in the function of the raw materials for mineralization, mineralized microenvironment, mineralization guidance, and the function of mineralized products. This review comprehensively summarizes the advantages of NMs and examines the specific mineralization mechanisms. Design strategies to promote regeneration and repair are summarized according to the application purpose of NMs in the oral cavity, and limitations and development directions in dental hard tissue remineralization are proposed. This review can provide a theoretical basis to understand the interaction between NMs and the remineralization of dental hard tissue, thereby optimizing design strategy, rational development, and clinical application of NMs in the field of remineralization.

The Effect of Formulated Dentin Remineralizing Gel Containing Hydroxyapatite, Fluoride, and Bioactive Glass on Dentin Microhardness: An In Vitro Study

Objectives

This study aimed to develop a gel with dentin-remineralizing properties, integrating nano-hydroxyapatite (nHA), sodium fluoride (NaF), and bioactive glass (BG).

Materials and Methods

The enamel layer of 40 bovine incisors was removed. The samples were allocated into four groups of 10 each, based on varying concentrations of nHA, BG, and NaF in the gel compositions (wt%): (1) 2.5%-7.5%-0.05%, (2) 5%-5%-0.05%, (3) 7.5%-2.5%-0.05%, and (4) a control group with a base gel lacking remineralizing agents. After 8 hr of demineralization, the dentin surface microhardness was measured at depths of 30, 60, and 140 µm. After a 20-day pH cycling, the percentage of surface microhardness recovery (SMHR%) was measured and compared among the groups using the ANOVA and Tukey HSD post hoc tests (α = 0.05). Scanning electron microscopy analysis evaluated each specimen's superficial morphology.

Results

At all depths, the SMHR% of the Group 2 and Group 3 was significantly higher than the control group (p  < 0.05). The SMHR% Group 1 (67.39% ± 29.34%) was significantly higher than the control group (-21.24% ± 51.72%) only at the depth of 30 μm (p = 0.047). Group 3 had higher SMHR% than Group 2 at all depths; however, the difference was not statistically significant. Moreover, the SMHR% of Group 3 was significantly higher than that of Group 1 at depths of 30 μm (187. 94% ± 68.95% vs. 67.39% ± 29.34%; p = 0.005) and 60 μm (179.55% ± 75.96% vs. 64.34% ± 41.96%; p = 0.043). Surface deposition and tubule occlusion were observed in the Groups 2 and 3 samples, which was more prominent in the latter.

Conclusions

Combining 7.5% nHA, 2.5% BG, and 0.05% NaF could potentially remineralize primary carious lesions.

Occluding Efficiency of Different Desensitizing Agents and Er,Cr:YSGG Laser on Dentin Tubules

PURPOSE

This study aimed to evaluate the effects of two desensitizers and the Er,Cr:YSGG laser on human dentin tubules, applied alone or in combination.

METHODS

Ninety-six dentin specimens were obtained from extracted third molars and divided into six groups: Group 1: no-treatment (Control); Group 2: nano-hydroxyapatite desensitizer (NhapD); Group 3: NhapD+Er,Cr:YSGG laser (L); Group 4: Er,Cr:YSGG laser (L); Group 5: glutaraldehyde desensitizer (GD); and Group 6: GD+L, respectively. All specimens were evaluated using scanning electron microscopy. The diameter and the number of open dentin tubules, the tubules' occluding ratio, and the mineral coverage area were measured via the Image J software at 2000× magnification. Atomic force microscopy was used to determine the blocking mechanism of desensitizing treatments and the surface morphology of dentin specimens. One-way ANOVA and Tukey tests were used for statistical analysis.

RESULTS

The number of open tubules and the mean diameter of tubules for all treatment groups showed statistically significant differences from the control group The NhapD+L group had a significantly lower number of open tubules than the L and GD groups. The NhapD+L and L groups significantly had higher occluding ratios than the other groups.

CONCLUSIONS

The present study showed that the Er,Cr:YSGG laser alone was effective in terms of tubule occlusion and also contributed to increasing the occluding ratio of nano-hydroxyapatite. It may be recommended to use the Er,Cr:YSGG laser with nano-hydroxyapatite desensitizers to achieve effective tubule occlusion.

Nanotechnology in toothpaste: Fundamentals, trends, and safety

Several studies have revealed that healthcare nanomaterials are widely used in numerous areas of dentistry, including prevention, diagnosis, treatment, and repair. Nanomaterials in dental cosmetics are utilized to enhance the efficacy of toothpaste and other mouthwashes. Nanoparticles are added to toothpastes for a variety of reasons, including dental decay prevention, remineralization, hypersensitivity reduction, brightening, and antibacterial qualities. In this review, the benefits and uses of many common nanomaterials found in toothpaste are outlined. Additionally, the capacity and clinical applications of nanoparticles as anti-bacterial, whitening, hypersensitivity, and remineralizing agents in the treatment of dental problems and periodontitis are discussed.

Self-propelled bioglass janus nanomotors for dentin hypersensitivity treatment

Dentin hypersensitivity treatment is not always successful owing to the exfoliation of the blocking layer. Therefore, efficiently delivering a desensitization agent into the dental tubule is critical. Nanomotors are widely used as in vivo drug delivery systems owing to their strong power and good biocompatibility. Herein, we report a kind of self-propelled bioglass Janus nanomotor with a Pt motion unit (nBGs@Pt) for application in dentin hypersensitivity that was prepared via a simple sol-gel method and magnetron sputtering method, with an average size of 290 nm. The Pt layer as the power unit provided the dynamics to deliver the bioglass (desensitization agent). Using hydrogen peroxide as a fuel, the nBGs@Pt could automatically move in different media. In addition, the nBGs@Pt with a mesoporous structure demonstrated good hydroxyapatite formation performance. An in vitro dentin pressure model was used to verify the blocking ability of the nBGs@Pt in dentin tubules. The dynamics of the nBGs@Pt was sufficient to resist the outflow of dentin fluid and movement into the dentin tubules, with a blocking rate of 58.05%. After remineralization, the blocking rate could reach 96.07% and the formation of hydroxyapatite of up to 10 μm or more occurred. It is expected that this study will provide a simple and feasible new strategy for the painless treatment of dentin sensitivity.

Influence of calcium-based desensitizing toothpastes on the bonding performance of universal adhesive

The study evaluated the effect of calcium-based desensitizing toothpastes on the dentinal tubule occlusion and its influence on the dentin bond strength of universal adhesive. Mid-coronal dentin samples were prepared for hypersensitivity model and treated by the following calcium-based desensitizing toothpastes: no treatment (Control), Clinpro (fTCP), Pro-Relief (Pro-Argin), and Repair & Protect (Novamin). Single Bond Universal adhesive was applied in self-etch or etch-and-rinse mode. The dentinal tubule occlusion and adhesion interface were evaluated under scanning electron microscope (SEM). A double-fluorescence technique was used to examine interfacial permeability under confocal laser scanning microscopy (CLSM). The micro-tensile bond strength (μTBS) was employed, followed by the fracture interface observation. SEM showed the toothpastes occluded dentinal tubules, and the occlusion exhibited stability against acid and abrasion. Hindered resin infiltration was observed in the adhesion interface after desensitization. CLSM showed more water permeation within or under the adhesion interface in etch-and-rinse mode than self-etch mode. Desensitization decreased the μTBS in self-etch mode. When using etch-and-rinse mode, the desensitized samples presented similar μTBS to the control group. No difference in μTBS was found between the two bonding modes, except for the control group. Calcium-based desensitizing toothpastes can effectively occlude the exposed dentinal tubules with acid-resistant and abrasion-resistant stability. The desensitization reduced the dentin bond strength of the universal adhesive system in self-etch mode but did not affect the bond strength of etch-and-rinse mode.

A novel rapidly mineralized biphasic calcium phosphate with high acid-resistance stability for long-term treatment of dentin hypersensitivity

OBJECTIVES

Treating dental hypersensitivity (DH) rapidly and maintaining long-term effectiveness remains challenging. We aimed to address this problem by fabricating a novel rapidly mineralized biphasic calcium phosphate (RMBCP), which could rapidly elicit mineralization to form hydroxyapatite (HA) and perform excellent acid-resistant stability, thus effectively blocking the exposed dental tubules and protecting them from acid attack.

METHODS

RMBCP was firstly synthesized by precisely adjusting the molar ratio of acetic acid and calcium hydroxide and characterized by X-ray diffraction (XRD), X-ray fluorescence microprobe (XRF), Fourier-transform infrared (FTIR) spectrometer, scanning electron microscope (SEM), and transmission electron microscope (TEM). Subsequently, using a commercialized desensitizing agent, 45S5 bioglass (BG), as the control group, the mineralization performance of RMBCP was investigated in simulated body fluid (SBF), Dulbecco's modified eagle medium (DMEM), and even slightly acidic artificial saliva (pH=6.6). Moreover, the biocompatibility of RMBCP was studied. Finally, the tubule occlusion effect and acid-resistant stability of RMBCP were evaluated in vitro and in vivo.

RESULTS

The rapid mineralization behavior of RMBCP could easily adhere to the dentin surface and block the dentinal tubules completely in vitro and in vivo within 7days. RMBCP performed high acid-resistant stability to maintain the long-term therapeutic effect of DH treatment.

SIGNIFICANCE

Developing novel bioactive calcium phosphate materials with the ability to trigger mineralization for HA formation rapidly will be an effective strategy for the long-term treatment of dentin hypersensitivity.

Dental-Derived Mesenchymal Stem Cells: State of the Art

Mesenchymal stem cells (MSCs) could be identified in mammalian teeth. Currently, dental-derived MSCs (DMSCs) has become a collective term for all the MSCs isolated from dental pulp, periodontal ligament, dental follicle, apical papilla, and even gingiva. These DMSCs possess similar multipotent potential as bone marrow-derived MSCs, including differentiation into cells that have the characteristics of odontoblasts, cementoblasts, osteoblasts, chondrocytes, myocytes, epithelial cells, neural cells, hepatocytes, and adipocytes. Besides, DMSCs also have powerful immunomodulatory functions, which enable them to orchestrate the surrounding immune microenvironment. These properties enable DMSCs to have a promising approach in injury repair, tissue regeneration, and treatment of various diseases. This review outlines the most recent advances in DMSCs' functions and applications and enlightens how these advances are paving the path for DMSC-based therapies.

Monetite, an important calcium phosphate compound-Its synthesis, properties and applications in orthopedics

This review recognizes a unique calcium phosphate (CaP) phase known as monetite or dicalcium phosphate anhydrous (DCPA, CaHPO₄), and presents an overview of its properties, processing, and applications in orthopedics. The motivation for the present effort is to highlight the state-of-the-art research and development of monetite and propel the research community to explore more of its potentials in orthopedics. After a brief introduction of monetite, we provide a summary of its various synthesis routes like dehydration, solvent-based, energy-assisted processes and also discuss the formation of different crystal structures with respect to the synthesis conditions. Subsequently, we discuss the material's noteworthy physico-chemical properties including the crystal structure, vibrational spectra, solubility, thermal decomposition, and conversion to other phases. Of note, we focus on the biological (in vitro and in vivo) properties of monetite, given its ever-increasing popularity as a biomaterial for medical implants. Appropriately, we discuss various orthopedic applications of monetite as bone cement, implant coatings, granules for defect fillers, and scaffolds. Many in vitro and in vivo studies confirmed the favorable osteointegration and osteoconduction properties of monetite products, along with a better balance between implant resorption and new bone formation as compared to other CaP phases. The review ends with translational aspects of monetite and presents thoughts about its possible future research directions. Further research may explore but not limited to improvements in mechanical strength of monetite-based scaffolds, using monetite particles as a therapeutic agent delivery, and tissue engineering strategies where monetite serves as the biomaterial. STATEMENT OF SIGNIFICANCE: This is the first review that focusses on the favorable potential of monetite for hard tissue repair and regeneration. The article accurately covers the "Synthesis-Structure-Property-Applications" correlations elaborating on monetite's diverse material properties. Special focus is put on the in vitro and in vivo properties of the material highlighting monetite as an orthopedic material-of-choice. The synthesis techniques are discussed which provide important information about the different fabrication routes for monetite. Most importantly, the review provides comprehensive knowledge about the diverse biomedical applications of monetite as granules, defect--specific scaffolds, bone cements and implant coatings. This review will help to highlight monetite's potential as an effective regenerative medicine and catalyze the continuing translation of this bioceramic from the laboratory to clinics.

Acidic Monetite Complex Paste with Bleaching Property for In-depth Occlusion of Dentinal Tubules

Background

Dentin hypersensitivity (DH) is a common dental clinical condition presented with a short and sharp pain in response to physical and chemical stimuli. Currently no treatment regimen demonstrates long-lasting efficacy in treating DH, and unesthetic yellow tooth color is a concern to many patients with DH.

Aim

To develop a bi-functional material which can occlude dentinal tubules in-depth and remineralize dentin for long-lasting protection of the dentin–pulp complex from stimuli and bleach the tooth at the same time.

Methods

A mixture containing CaO, H₃PO₄, polyethylene glycol and H₂O₂ at a specific ratio was mechanically ground using a planetary ball. The mineralizing complex paste was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Dentin was exposed to the synthesized paste for 8 h and 24 h in vitro. The mineralizing property was evaluated using SEM and microhardness tests. Red tea-stained tooth slices were exposed to the synthesized paste for 8 h and 24 h in vitro. The bleaching effect was characterized by a spectrophotometer.

Results

The complex paste had very a fine texture, was injectable, and had a gel-like property with 2.6 (mass/volume) % H₂O₂ concentration. The X-ray diffraction pattern showed that the inorganic phase was mainly monetite (CaHPO₄). The mineralizing complex paste induced the growth of inorganic crystals on the dentin surface and in-depth occlusion of dentin tubules by up to 80 μm. The regenerated crystals were integrated into the dentin tissue on the dentin surface and the wall of dentinal tubules with a microhardness of up to 126 MPa (versus 137 Mpa for dentin). The paste also bleached the stained dental slices.

Conclusion

The mineralizing complex paste is a promising innovative material for efficient DH management by remineralizing dentin and in-depth occlusion of dentin tubules, as well as tooth bleaching.