Impact of dose reduction and the use of an advanced model-based iterative reconstruction algorithm on spectral performance of a dual-source CT system: A task-based image quality assessment

CT Imaging of the Pancreas: A Review of Current Developments and Applications

Pancreatic cancer continues to pose daily challenges to clinicians, radiologists, and researchers. These challenges are encountered at each stage of pancreatic cancer management, including early detection, definite characterization, accurate assessment of tumour burden, preoperative planning when surgical resection is possible, prediction of tumour aggressiveness, response to treatment, and detection of recurrence. CT imaging of the pancreas has made major advances in recent years through innovations in research and clinical practice. Technical advances in CT imaging, often in combination with imaging biomarkers, hold considerable promise in addressing such challenges. Ongoing research in dual-energy and spectral photon-counting computed tomography, new applications of artificial intelligence and image rendering have led to innovative implementations that allow now a more precise diagnosis of pancreatic cancer and other diseases affecting this organ. This article aims to explore the major research initiatives and technological advances that are shaping the landscape of CT imaging of the pancreas. By highlighting key contributions in diagnostic imaging, artificial intelligence, and image rendering, this article provides a comprehensive overview of how these innovations are enhancing diagnostic precision and improving outcome in patients with pancreatic diseases.

Ultra-high-resolution CT of the temporal bone: Technical aspects, current applications and future directions

Temporal bone imaging has historically suffered from spatial resolution issues because the spatial resolution of conventional high-resolution computed tomography (CT) is 0.5 mm, while the smallest structure of the middle ear, the stapes, has very thin components, as thin as 0.19 mm, and small structures, such as small channels containing nerves and arteries, have historically been beyond its spatial resolution. Photon-counting and ultra-high resolution CT allow for improved spatial resolution and reduced radiation dose compared to conventional high-resolution CT. This article provides a technical approach to understanding the technical aspects of these new techniques and an updated description of the middle and inner ear, as well as a practical approach to understanding the normal and pathologic anatomy of the temporal bone in the light of ultra-high resolution imaging techniques.

Voxelwise characterization of noise for a clinical photon-counting CT scanner with a model-based iterative reconstruction algorithm

BACKGROUND

Photon-counting detector (PCD) technology has the potential to reduce noise in computed tomography (CT). This study aimed to carry out a voxelwise noise characterization for a clinical PCD-CT scanner with a model-based iterative reconstruction algorithm (QIR).

METHODS

Forty repeated axial acquisitions (tube voltage 120 kV, tube load 200 mAs, slice thickness 0.4 mm) of a homogeneous water phantom and CTP404 module (Catphan-504) were performed. Water phantom acquisitions were also performed on a conventional energy-integrating detector (EID) scanner with a sinogram/image-based iterative reconstruction algorithm, using similar acquisition/reconstruction parameters. For smooth/sharp kernels, filtered back projection (FBP)- and iterative-reconstructed images were obtained. Noise maps, non-uniformity index (NUI) of noise maps, image noise histograms, and noise power spectrum (NPS) curves were computed.

RESULTS

For FBP-reconstructed images of water phantom, mean noise was (smooth/sharp kernel) 11.7 HU/51.1 HU and 18.3 HU/80.1 HU for PCD-scanner and EID-scanner, respectively, with NUI values for PCD-scanner less than half those for EID-scanner. Percentage noise reduction increased with increasing iterative power, up to (smooth/sharp kernel) 57.7%/72.5% and 56.3%/70.1% for PCD-scanner and EID-scanner, respectively. For PCD-scanner, FBP- and QIR-reconstructed images featured an almost Gaussian distribution of noise values, whose shape did not appreciably vary with iterative power. Noise maps of CTP404 module showed increased NUI values with increasing iterative power, up to (smooth/sharp kernel) 15.7%/9.2%. QIR-reconstructed images showed limited low-frequency shift of NPS peak frequency.

CONCLUSION

PCD-CT allowed appreciably reducing image noise while improving its spatial uniformity. QIR algorithm decreases image noise without modifying its histogram distribution shape, and partly preserving noise texture.

RELEVANCE STATEMENT

This phantom study corroborates the capability of photon-counting detector technology in appreciably reducing CT imaging noise and improving spatial uniformity of noise values, yielding a potential reduction of radiation exposure, though this needs to be assessed in more detail.

KEY POINTS

First voxelwise characterization of noise for a clinical CT scanner with photon-counting detector technology. Photon-counting detector technology has the capability to appreciably reduce CT imaging noise and improve spatial uniformity of noise values. In photon-counting CT, a model-based iterative reconstruction algorithm (QIR) allows decreasing effectively image noise. This is done without modifying noise histogram distribution shape, while limiting the low-frequency shift of noise power spectrum peak frequency.

Spectral CT-based nomogram for evaluation of neoadjuvant chemotherapy response in esophageal squamous cell carcinoma

OBJECTIVES

To establish a spectral CT-based nomogram for predicting the response to neoadjuvant chemotherapy (NAC) in patients with locally advanced esophageal squamous cell carcinoma (ESCC).

METHODS

This retrospective study included 172 patients with ESCC who underwent spectral CT scans before NAC followed by resection. Based on postoperative tumor regression grades (TRG), 34% (58) of patients were responsive (TRG1) and 66% (114) were non-responsive (TRG2-3). The data was divided into a primary set of 120 and a validation set of 52, maintaining a 7:3 random ratio. Measurements included iodine concentration (IC), normalized iodine concentration (nIC), CT40kev, CT70kev, spectral attenuation curve slope (λHU), and effective atomic number (Zeff) during non-contrast and venous phases (VP). Clinicopathologic characteristics were collected. Univariable and multivariable logistic regressions identified independent predictors of NAC response. The model was visualized using nomograms, and its efficacy was assessed via receiver operating characteristic (ROC) curves.

RESULTS

Multivariable logistic regression analysis identified the neutrophil-to-lymphocyte ratio (NLR), clinical stage, ZeffVP, and nICVP as independent predictors of NAC response. The nomogram incorporating all four independent predictors, outperformed spectral CT and the clinical model with the highest AUCs of 0.825 (95% CI: 0.746-0.895) for the primary set and 0.794 (95% CI: 0.635-0.918) for the validation set (DeLong test: all p < 0.05).

CONCLUSIONS

The spectral CT and clinical models were useful in predicting NAC response in ESCC patients. Combining spectral CT imaging parameters and clinicopathologic characteristics in a nomogram improved predictive accuracy.

KEY POINTS

Question Developing a non-invasive, practical tool to predict ESCC's response to chemotherapy is crucial and has not yet been done. Findings This nomogram, incorporating clinicopathologic characteristics and spectral CT-derived parameters, predicted NAC response in ESCC patients. Clinical relevance This spectral CT-based nomogram is a non-invasive and easily obtainable tool for accurately predicting ESCC response to NAC, aiding clinicians in personalized treatment planning.

Dual-energy CT for predicting serosal invasion in gastric cancer and subtype analysis

PURPOSE

To predict the serosal invasion of gastric cancer (GC) using dual-energy CT (DECT)-based parameters and analyze the diagnostic performance according to different subtypes.

METHODS

The patients were divided into the T1-3 group and T4a group. The irregular region of interest (ROI) was manually delineated on the largest cross-section of the lesion. The ROI area, iodine concentration (IC), normalized iodine concentration (nIC), fat fraction, CT value mean, and standard deviation were measured in the late arterial (LAP) and venous phase (VP). The Mann-Whitney U test was used to assess differences between different T-stage groups and histopathological subtypes of GC. A model was established based on DECT parameters, and the receiver operating characteristic (ROC) curve was used to evaluate the diagnostic performance.

RESULTS

Preliminary analysis showed that there were significant differences in ROI area, IC, nIC and CT value mean in VP and ROI area in LAP between T1-3 and T4a GC (all p < 0.05). The AUC of the comprehensive model composed of ROI and nIC in VP was 0.805. For different subtypes, multiple DECT parameters of poorly cohesive carcinoma (PCC) showed significant differences.

CONCLUSION

ROI area in LAP and VP, IC, nIC, and CT value mean in VP have significant differences in distinguishing between T1-3 and T4a GC. Iodine-related parameters in VP differed significantly between T1-3 and T4a in PCCs, rather than TACs. Considering the heterogeneity of different WHO subtypes, DECT iodine-related parameters in VP are more predictive of the serosal invasion status of GC compared to LAP.

Comparison of low-energy virtual monoenergetic images between photon-counting CT and energy-integrating detectors CT: A phantom study

PURPOSE

The purpose of this study was to assess image quality and dose level using a photon-counting CT (PCCT) scanner by comparison with a dual-source CT (DSCT) scanner on virtual monoenergetic images (VMIs) at low energy levels.

MATERIALS AND METHODS

A phantom was scanned using a DSCT and a PCCT with a volume CT dose index of 11 mGy, and additionally at 6 mGy and 1.8 mGy for PCCT. Noise power spectrum and task-based transfer function were evaluated from 40 to 70 keV on VMIs to assess noise magnitude and noise texture (fav) and spatial resolution on two iodine inserts (f50), respectively. A detectability index (d') was computed to assess the detection of two contrast-enhanced lesions according to the energy level used.

RESULTS

For all energy levels, noise magnitude values were lower with PCCT than with DSCT at 11 and 6 mGy, but greater at 1.8 mGy. fav values were higher with PCCT than with DSCT at 11 mGy (8.6 ± 1.5 [standard deviation [SD]%), similar at 6 mGy (1.6 ± 1.5 [SD]%) and lower at 1.8 mGy (-17.8 ± 2.2 [SD]%). For both inserts, f50 values were higher with PCCT than DSCT at 11- and 6 mGy for all keV levels, except at 6 mGy and 40 keV. d' values were higher with PCCT than with DSCT at 11- and 6 mGy for all keV and both simulated lesions. Similar d' values to those of the DSCT at 11 mGy, were obtained at 2.25 mGy for iodine insert at 2 mg/mL and at 0.96 mGy for iodine insert at 4 mg/mL at 40 keV.

CONCLUSION

Compared to DSCT, PCCT reduces noise magnitude and improves noise texture, spatial resolution and detectability on VMIs for all low-keV levels.

Evaluation of low-dose pediatric chest CT examination using in-house developed various age-size pediatric chest phantoms

PURPOSE

This study aims to develop Various Age-size Pediatric Chest Phantoms (VAPC) to evaluate low-dose protocol that approximates clinical conditions achieved by low organ-specific doses and optimal image quality among the challenges of pediatric size variations.

METHODS

Three original pediatric data aged 1, 4, and 7 years were used as a reference for developing VAPC phantoms. Six protocols, namely standard dose (STD) and low dose (low mA and low kV) reconstructed using Filtered Back Projection (FBP) and iterative reconstruction (IR) algorithms, were investigated. This study directly measured the lungs, heart, and spinal cord dose using LD-V1 film. Linearity, Modulation Transfer Function (MTF), Contrast to Noise Ratio (CNR), and Noise Power Spectrum (NPS) were evaluated to assess the CT image quality of the VAPC phantom.

RESULTS

This study found that the mean organ-specific dose was higher than CTDIvol. A Comparison of mean lung doses showed VAPC phantom 1 (y.o.) received 74.8% and 137.2% more doses than 4 (y.o.) and 7 (y.o.), respectively. Low kV produces a lower organ dose than low mA. The linearity of CT numbers is not biased at low doses. Differences in age measures significantly influenced organ-specific dose, MTF, CNR, and NPS.

CONCLUSION

Smaller pediatrics are still exposed to higher doses at low-dose examinations, whereas larger pediatrics have lower contrast resolution and increased image noise. CT number linearity is unbiased. The combination of low kV with FBP produces higher spatial resolution, while low mA with IR effectively reduces noise to detect low-contrast objects better.

CT and MRI of abdominal cancers: current trends and perspectives in the era of radiomics and artificial intelligence

Abdominal cancers continue to pose daily challenges to clinicians, radiologists and researchers. These challenges are faced at each stage of abdominal cancer management, including early detection, accurate characterization, precise assessment of tumor spread, preoperative planning when surgery is anticipated, prediction of tumor aggressiveness, response to therapy, and detection of recurrence. Technical advances in medical imaging, often in combination with imaging biomarkers, show great promise in addressing such challenges. Information extracted from imaging datasets owing to the application of radiomics can be used to further improve the diagnostic capabilities of imaging. However, the analysis of the huge amount of data provided by these advances is a difficult task in daily practice. Artificial intelligence has the potential to help radiologists in all these challenges. Notably, the applications of AI in the field of abdominal cancers are expanding and now include diverse approaches for cancer detection, diagnosis and classification, genomics and detection of genetic alterations, analysis of tumor microenvironment, identification of predictive biomarkers and follow-up. However, AI currently has some limitations that need further refinement for implementation in the clinical setting. This review article sums up recent advances in imaging of abdominal cancers in the field of image/data acquisition, tumor detection, tumor characterization, prognosis, and treatment response evaluation.

CT and MRI of Gastrointestinal Stromal Tumors: New Trends and Perspectives

Gastrointestinal stromal tumors (GISTs) are defined as mesenchymal tumors of the gastrointestinal tract that express positivity for CD117, which is a c-KIT proto-oncogene antigen. Expression of the c-KIT protein, a tyrosine kinase growth factor receptor, allows the distinction between GISTs and other mesenchymal tumors such as leiomyoma, leiomyosarcoma, schwannoma and neurofibroma. GISTs can develop anywhere in the gastrointestinal tract, as well as in the mesentery and omentum. Over the years, the management of GISTs has improved due to a better knowledge of their behaviors and risk or recurrence, the identification of specific mutations and the use of targeted therapies. This has resulted in a better prognosis for patients with GISTs. In parallel, imaging of GISTs has been revolutionized by tremendous progress in the field of detection, characterization, survival prediction and monitoring during therapy. Recently, a particular attention has been given to radiomics for the characterization of GISTs using analysis of quantitative imaging features. In addition, radiomics has currently many applications that are developed in conjunction with artificial intelligence with the aim of better characterizing GISTs and providing a more precise assessment of tumor burden. This article sums up recent advances in computed tomography and magnetic resonance imaging of GISTs in the field of image/data acquisition, tumor detection, tumor characterization, treatment response evaluation, and preoperative planning.

In vivo depiction of cortical bone vascularization with ultra-high resolution-CT and deep learning algorithm reconstruction using osteoid osteoma as a model

PURPOSE

The purpose of this study was to evaluate the ability to depict in vivo bone vascularization using ultra-high-resolution (UHR) computed tomography (CT) with deep learning reconstruction (DLR) and hybrid iterative reconstruction algorithm, compared to simulated conventional CT, using osteoid osteoma as a model.

MATERIALS AND METHODS

Patients with histopathologically proven cortical osteoid osteoma who underwent UHR-CT between October 2019 and October 2022 were retrospectively included. Images were acquired with a 1024 × 1024 matrix and reconstructed with DLR and hybrid iterative reconstruction algorithm. To simulate conventional CT, images with a 512 × 512 matrix were also reconstructed. Two radiologists (R1, R2) independently evaluated the number of blood vessels entering the nidus and crossing the bone cortex, as well as vessel identification and image quality with a 5-point scale. Standard deviation (SD) of attenuation in the adjacent muscle and that of air were used as image noise and recorded.

RESULTS

Thirteen patients with 13 osteoid osteomas were included. There were 11 men and two women with a mean age of 21.8 ± 9.1 (SD) years. For both readers, UHR-CT with DLR depicted more nidus vessels (11.5 ± 4.3 [SD] (R1) and 11.9 ± 4.6 [SD] (R2)) and cortical vessels (4 ± 3.8 [SD] and 4.3 ± 4.1 [SD], respectively) than UHR-CT with hybrid iterative reconstruction (10.5 ± 4.3 [SD] and 10.4 ± 4.6 [SD], and 4.1 ± 3.8 [SD] and 4.3 ± 3.8 [SD], respectively) and simulated conventional CT (5.3 ± 2.2 [SD] and 6.4 ± 2.5 [SD], 2 ± 1.2 [SD] and 2.4 ± 1.6 [SD], respectively) (P < 0.05). UHR-CT with DLR provided less image noise than simulated conventional CT and UHR-CT with hybrid iterative reconstruction (P < 0.05). UHR-CT with DLR received the greatest score and simulated conventional CT the lowest score for vessel identification and image quality.

CONCLUSION

UHR-CT with DLR shows less noise than UHR-CT with hybrid iterative reconstruction and significantly improves cortical bone vascularization depiction compared to simulated conventional CT.

Quantifying iodine concentration in the normal bowel wall using dual-energy CT: influence of patient and contrast characteristics

This study aimed to establish quantitative references of the normal bowel wall iodine concentration (BWIC) using dual energy CT (DECT). This single-center retrospective study included 248 patients with no history of gastrointestinal disease who underwent abdominal contrast-enhanced DECT between January and April 2022. The BWIC was normalized by the iodine concentration of upper abdominal organs (BWICorgan,) and the iodine concentration (IC) of the aorta (BWICaorta). BWIC decreased from the stomach to the rectum (mean 2.16 ± 0.63 vs. 2.19 ± 0.63 vs. 2.1 ± 0.58 vs. 1.67 ± 0.47 vs. 1.31 ± 0.4 vs. 1.18 ± 0.34 vs. 0.94 ± 0.26 mgI/mL for the stomach, duodenum, jejunum, ileum, right colon, left colon and rectum, respectively; P < 0.001). By multivariate analysis, BWIC was associated with a higher BMI (OR:1.01, 95% CI 1.00-1.02, P < 0.001) and with a higher injected contrast dose (OR: 1.51; 95% CI 1.36-1.66, P < 0.001 and 2.06; 95% CI 1.88-2.26, P < 0.001 for 500 mgI/kg and 600 mgI/kg doses taking 400 mgI/kg dose as reference). The BWICorgan was shown independent from patients and contrast-related variables while the BWICaorta was not. BWIC varies according to bowel segments and is dependent on the total iodine dose injected. It shall be normalized with the IC of the upper abdominal organs.

Evaluation of Image Quality and Detectability of Deep Learning Image Reconstruction (DLIR) Algorithm in Single- and Dual-energy CT

This study is aimed to evaluate effects of deep learning image reconstruction (DLIR) on image quality in single-energy CT (SECT) and dual-energy CT (DECT), in reference to adaptive statistical iterative reconstruction-V (ASIR-V). The Gammex 464 phantom was scanned in SECT and DECT modes at three dose levels (5, 10, and 20 mGy). Raw data were reconstructed using six algorithms: filtered back-projection (FBP), ASIR-V at 40% (AV-40) and 100% (AV-100) strength, and DLIR at low (DLIR-L), medium (DLIR-M), and high strength (DLIR-H), to generate SECT 120kVp images and DECT 120kVp-like images. Objective image quality metrics were computed, including noise power spectrum (NPS), task transfer function (TTF), and detectability index (d'). Subjective image quality evaluation, including image noise, texture, sharpness, overall quality, and low- and high-contrast detectability, was performed by six readers. DLIR-H reduced overall noise magnitudes from FBP by 55.2% in a more balanced way of low and high frequency ranges comparing to AV-40, and improved the TTF values at 50% for acrylic inserts by average percentages of 18.32%. Comparing to SECT 20 mGy AV-40 images, the DECT 10 mGy DLIR-H images showed 20.90% and 7.75% improvement in d' for the small-object high-contrast and large-object low-contrast tasks, respectively. Subjective evaluation showed higher image quality and better detectability. At 50% of the radiation dose level, DECT with DLIR-H yields a gain in objective detectability index compared to full-dose AV-40 SECT images used in daily practice.

Impact of the automatic tube current modulation (ATCM) system on virtual monoenergetic image quality for dual-source CT: A phantom study

PURPOSE

To assess the impact of the automatic tube current modulation (ATCM) on virtual monoenergetic images (VMIs) quality in dual-source CT(DSCT).

MATERIALS AND METHODS

Acquisitions were performed on DSCT using the Mercury phantom. The acquisition parameters for an abdomen-pelvic examination with single-energy CT(SECT) and dual-energy CT(DECT) imaging were used. Acquisitions were performed for each imaging mode using fixed mAs and ATCM. The mAs value was set to obtain a volume CT dose index of 11 mGy in fixed mAs acquisitions. This value was used as the reference mAs in ATCM acquisitions. The noise power spectrum and task-based transfer function at 40,50,60 and 70 keV levels were computed on VMIs and SECT images. The detectability index (d') was calculated for a lesion with an iodine concentration of 10 mg/mL.

RESULTS

The noise magnitude on VMIs was higher with the ATCM system than with fixed mAs for all energy levels and section diameters of 21,26 and 31 cm. The noise texture and spatial resolution were similar between the fixed mAs and ATCM acquisitions for both imaging modes. The d' values were lower for all energy levels with ATCM than with fixed mAs acquisitions for 21 and 26 cm diameters by -39.82 ± 9.32%, similar at 31 cm diameter -4.13 ± 0.24% and higher at 36 cm diameter 10.40 ± 6.69%. It was higher on VMIs at all energy levels compared to SECT images.

CONCLUSIONS

The ATCM system could be used with DECT imaging to optimize patient exposure without changing the noise texture and spatial resolution of VMIs compared to fixed mAs and SECT.

"Image quality evaluation of the Precise image CT deep learning reconstruction algorithm compared to Filtered Back-projection and iDose4: a phantom study at different dose levels"

PURPOSE

To characterize the performance of the Precise Image (PI) deep learning reconstruction (DLR) algorithm for abdominal Computed Tomography (CT) imaging.

METHODS

CT images of the Catphan-600 phantom (equipped with an external annulus) were acquired using an abdominal protocol at four dose levels and reconstructed using FBP, iDose⁴ (levels 2,5) and PI ('Soft Tissue' definition, levels 'Sharper','Sharp','Standard','Smooth','Smoother'). Image noise, image non-uniformity, noise power spectrum (NPS), target transfer function (TTF), detectability index (d'), CT numbers accuracy and image histograms were analyzed.

RESULTS

The behavior of the PI algorithm depended strongly on the selected level of reconstruction. The phantom analysis suggested that the PI image noise decreased linearly by varying the level of reconstruction from Sharper to Smoother, expressing a noise reduction up to 80% with respect to FBP. Additionally, the non-uniformity decreased, the histograms became narrower, and d' values increased as PI reconstruction levels changed from Sharper to Smoother. PI had no significant impact on the average CT number of different contrast objects. The conventional FBP NPS was deeply altered only by Smooth and Smoother levels of reconstruction. Furthermore, spatial resolution was found to be dose- and contrast-dependent, but in each analyzed condition it was greater than or comparable to FBP and iDose⁴ TTFs.

CONCLUSIONS

The PI algorithm can reduce image noise with respect to FBP and iDose⁴; spatial resolution, CT numbers and image uniformity are generally preserved by the algorithm but changes in NPS for the Smooth and Smoother levels need to be considered in protocols implementation.

Artificial intelligence in diagnostic and interventional radiology: Where are we now?

The emergence of massively parallel yet affordable computing devices has been a game changer for research in the field of artificial intelligence (AI). In addition, dramatic investment from the web giants has fostered the development of a high-quality software stack. Going forward, the combination of faster computers with dedicated software libraries and the widespread availability of data has opened the door to more flexibility in the design of AI models. Radiomics is a process used to discover new imaging biomarkers that has multiple applications in radiology and can be used in conjunction with AI. AI can be used throughout the various processes of diagnostic imaging, including data acquisition, reconstruction, analysis and reporting. Today, the concept of "AI-augmented" radiologists is preferred to the theory of the replacement of radiologists by AI in many indications. Current evidence bolsters the assumption that AI-assisted radiologists work better and faster. Interventional radiology becomes a data-rich specialty where the entire procedure is fully recorded in a standardized DICOM format and accessible via standard picture archiving and communication systems. No other interventional specialty can bolster such readiness. In this setting, interventional radiology could lead the development of AI-powered applications in the broader interventional community. This article provides an update on the current status of radiomics and AI research, analyzes upcoming challenges and also discusses the main applications in AI in interventional radiology to help radiologists better understand and criticize articles reporting AI in medical imaging.

Spectral CT imaging: Technical principles of dual-energy CT and multi-energy photon-counting CT

Spectral computed tomography (CT) imaging encompasses a unique generation of CT systems based on a simple principle that makes use of the energy-dependent information present in CT images. Over the past two decades this principle has been expanded with the introduction of dual-energy CT systems. The first generation of spectral CT systems, represented either by dual-source or dual-layer technology, opened up a new imaging approach in the radiology community with their ability to overcome the limitations of tissue characterization encountered with conventional CT. Its expansion worldwide can also be considered as an important leverage for the recent groundbreaking technology based on a new chain of detection available on photon counting CT systems, which holds great promise for extending CT towards multi-energy CT imaging. The purpose of this article was to detail the basic principles and techniques of spectral CT with a particular emphasis on the newest technical developments of dual-energy and multi-energy CT systems.

Imaging of Pancreatic Ductal Adenocarcinoma: An Update on Recent Advances

Pancreatic ductal carcinoma (PDAC) is one of the leading causes of cancer-related death worldwide. Computed tomography (CT) remains the primary imaging modality for diagnosis of PDAC. However, CT has limitations for early pancreatic tumor detection and tumor characterization so that it is currently challenged by magnetic resonance imaging. More recently, a particular attention has been given to radiomics for the characterization of pancreatic lesions using extraction and analysis of quantitative imaging features. In addition, radiomics has currently many applications that are developed in conjunction with artificial intelligence (AI) with the aim of better characterizing pancreatic lesions and providing a more precise assessment of tumor burden. This review article sums up recent advances in imaging of PDAC in the field of image/data acquisition, tumor detection, tumor characterization, treatment response evaluation, and preoperative planning. In addition, current applications of radiomics and AI in the field of PDAC are discussed.

Comparison of virtual monoenergetic imaging between a rapid kilovoltage switching dual-energy computed tomography with deep-learning and four dual-energy CTs with iterative reconstruction

Background

To assess the spectral performance of rapid kV switching dual-energy CT (KVSCT-Canon) equipped with a Deep-Learning spectral reconstruction algorithm on virtual-monoenergetic images at low-energy levels and to compare its performances with four other dual-energy CT (DECT) platforms equipped with iterative reconstruction algorithms.

Methods

Two CT phantoms were scanned on five DECT platforms: KVSCT-Canon, fast kV-switching CT (KVSCT-GE), split filter CT, dual-source CT (DSCT), and dual-layer CT (DLCT). The classical parameters of abdomen-pelvic examinations were used for all phantom acquisitions, and a CTDI_vol close to 10 mGy. For KVSCT-Canon, virtual-monoenergetic images were reconstructed with a clinical slice thickness of 0.5 and 1.5 mm to be close to other platforms. Noise power spectrum (NPS) and task-based transfer function (TTF) were evaluated from 40 to 80 keV of virtual-monoenergetic images. A detectability index (d') was computed to model the detection task of two contrast-enhanced lesions as function of keV.

Results

For KVSCT-Canon, the noise magnitude and average NPS spatial frequency (f_av) decreased from 40 to 70 keV and increased thereafter. Similar noise magnitude outcomes were found for KVSCT-GE but the opposite for f_av. For the other DECT platforms, the noise magnitude decreased as the keV increased. For split filter CT, DSCT and DLCT, the f_av values increased from 40 to 80 keV. For all DECT platforms, TTF at 50% (f₅₀) decreased as the keV increased, decreasing spatial resolution. For KVSCT-Canon, d' values peaked at 60 and 70 keV for both simulated lesions and from 50 to 70 keV for KVSCT-GE. d' decreased between 40 and 70 keV for DSCT, DLCT and split filter CT. For KVSCT-Canon, the increase in slice thickness decreases noise magnitude, f_av and f₅₀ and increases d' values. The highest d' values were found for DLCT at 40 and 50 keV and for KVSCT-Canon at 1.5 mm for other keV.

Conclusions

For KVSCT-Canon, the detectability of contrast-enhanced lesions was highest at 60 keV. The highest d' values were found for DLCT at 40 and 50 keV and for KVSCT-Canon at 1.5 mm for other keV.

Virtual monoenergetic images from dual-energy CT: systematic assessment of task-based image quality performance

Background

To compare task-based image quality (TB-IQ) among virtual monoenergetic images (VMI) and linear-blended images (LBI) from dual-energy CT as a function of contrast task, radiation dose, size, and lesion diameter.

Methods

A TB-IQ phantom (Mercury Phantom 4.0, Sun Nuclear Corporation) was imaged on a third-generation dual-source dual-energy CT with 100/Sn150 kVp at three volume CT dose levels (5, 10, 15 mGy). Three size sections (diameters 16, 26, 36 cm) with subsections for image noise and spatial resolution analysis were used. High-contrast tasks (e.g., calcium-containing stone and vascular lesion) were emulated using bone and iodine inserts. A low-contrast task (e.g., low-contrast lesion or hematoma) was emulated using a polystyrene insert. VMI at 40-190 keV and LBI were reconstructed. Noise power spectrum (NPS) determined the noise magnitude and texture. Spatial resolution was assessed using the task-transfer function (TTF) of the three inserts. The detectability index (d') served as TB-IQ metric.

Results

Noise magnitude increased with increasing phantom size, decreasing dose, and decreasing VMI-energy. Overall, noise magnitude was higher for VMI at 40-60 keV compared to LBI (range of noise increase, 3-124%). Blotchier noise texture was found for low and high VMIs (40-60 keV, 130-190 keV) compared to LBI. No difference in spatial resolution was observed for high contrast tasks. d' increased with increasing dose level or lesion diameter and decreasing size. For high-contrast tasks, d' was higher at 40-80 keV and lower at high VMIs. For the low-contrast task, d' was higher for VMI at 70-90 keV and lower at 40-60 keV.

Conclusions

Task-based image quality differed among VMI-energy and LBI dependent on the contrast task, dose level, phantom size, and lesion diameter. Image quality could be optimized by tailoring VMI-energy to the contrast task. Considering the clinical relevance of iodine, VMIs at 50-60 keV could be proposed as an alternative to LBI.

Accuracy of a CT density threshold enhancement in distinguishing pancreas parenchymal necrosis in cases of acute pancreatitis in the first week

PURPOSE

The purpose of this study was to identify attenuation threshold value on computed tomography (CT) that allowed discriminating between interstitial edematous pancreatitis (IEP) and necrotizing pancreatitis (NP) in patients with acute pancreatitis during the first week of the disease and evaluate interobserver reproducibility for the diagnosis of acute pancreatitis category.

MATERIALS AND METHODS

Patients with acute pancreatitis who underwent CT examination of the abdomen between March 2015 and December 2019 were retrospectively included. Actual diagnosis of IEP or NP was based on final clinical report, follow-up evaluation, and complications. Six regions of interest were manually placed in the pancreatic gland and peripancreatic fat, and differences in CT attenuation values before contrast injection and during the portal venous phase of enhancement were computed. Performance in the diagnosis of AP category was evaluated using receiver operating characteristic analysis. Interobserver agreement was estimated by the intraclass correlation coefficient (ICC) and Bland Altman analysis was used to estimate reproducibility between pairs of observers.

RESULTS

Sixty-six patients with NP (46 men, 20 women; mean age, 55 ± 17 [SD] years; age range: 20-89 years) and 70 patients with IEP (39 men, 31 women; mean age, 54 ± 18 [SD] years; age range: 21-87 years) were included. An enhancement value less than 30 Hounsfield units (HU) in the pancreatic gland during the portal phase compared to non-contrast phase, yielded 90.9% sensitivity (60/66; 95% CI: 81.3-96.6), 94.3% specificity (66/70; 95% CI: 86.0-98.4) and an area under curve of 0.958 (95% CI: 0.919-0.996) for the diagnosis of NP versus IEP. Interobserver reproducibility for pancreas enhancement was good using Bland Altman plot and ICC was excellent for pancreatic gland analysis (ICC 0.978; 95% CI: 0.961-0.988) but poor or moderate (ICC ≤0.634) regarding peripancreatic fat necrosis.

CONCLUSION

By using a pancreas enhancement threshold value of 30 HU, CT is accurate and reproducible for the diagnosis of NP during the first week of the disease.

Optimization of image quality and accuracy of low iodine concentration quantification as function of dose level and reconstruction algorithm for abdominal imaging using dual-source CT: A phantom study

PURPOSE

The purpose of this study was to assess the impact of advanced modeled iterative reconstruction (ADMIRE) algorithm and dose levels on the accuracy of Hounsfield unit (HU) measurement, image noise and contrast-to-noise ratio (CNR) in virtual monochromatic images (VMIs) with low iodine concentrations, and the accuracy of iodine quantification.

MATERIALS AND METHODS

A CT phantom was scanned with dual-source CT using abdomen-pelvis examination parameters at four dose levels: 5, 8, 11 and 20 mGy. Images were reconstructed using filtered-back projection (FBP) and ADMIRE levels 3 and 5 (A3-A5). HU accuracy was assessed calculating the root-mean-square deviation (RMSD_HU). Image noise and CNR were computed on VMIs at 40/50/60/70 keV for 4 iodine inserts with 0.5, 1, 2 and 5 mg/mL concentrations. Accuracy of iodine quantification was assessed by the RMSD_iodine and iodine bias (IB).

RESULTS

The RMSD_HU decreased significantly as the dose levels increased compared to 5 mGy, except for 8 mGy with A3 (P = 0.380) and with A5 level (P = 0.945). Noise increased by 63.0 ± 3.0 (standard deviation [SD])% from 20 mGy to 5 mGy. Noise decreased significantly by -53.8 ± 0.9 (SD) % with A5 compared to FBP. The CNR decreased by -43.1 ± 6.5 (SD)% from 20 mGy to 5 mGy. It increased using ADMIRE, and as the ADMIRE levels increased. The RMSD_iodine and IB decreased as the dose level increased, and this was similar for all reconstruction types.

CONCLUSION

ADMIRE strongly improves image quality in VMIs and slightly improves HU accuracy but does not affect the accuracy of iodine quantification.