Simultaneous preconcentration of toxic elements in artificial saliva extract of smokeless tobacco product, mainpuri by cloud point extraction method

Determination of trace cadmium in saliva samples using spray assisted droplet formation-liquid phase microextraction prior to the measurement by slotted quartz tube-flame atomic absorption spectrophotometry

BACKGROUND

An effective, green and rapid analytical strategy namely the simultaneous spray assisted droplet formation-liquid phase microextraction (S-SADF-LPME) method was developed for the determination of trace quantity of cadmium in saliva samples by using the slotted quartz tube-flame atomic absorption spectrophotometry (SQT-FAAS). By the developed method, external dispersive solvent usage for droplet formation was reduced to obtain a more environmental-friendly method.

METHODS

Method consists of a simultaneous complexing and extraction step, which was based on spraying an extraction solvent containing a solid ligand into the aqueous sample solution, forming fine droplets without the use of dispersive solvent. The procedure was implemented using a customized, cost effective and portable spray apparatus to minimize the consumption of reagent, analysis time and operation steps. Thus, this methodology ensures better repeatability and accuracy while minimizing the relative errors caused by the experimental steps. Parameters including the buffer amount, extractant/ligand concentration, extraction solvent type, extraction/ligand solution volume, spraying number and vortex period were systemically optimized to lower the detection limit.

RESULTS

Under the optimal extraction conditions, 96.9-folds enhancement in the detection power of the traditional FAAS was achieved. The limit of detection and limit of quantification values of presented method were calculated to be 0.65 and 2.17 ng mL^-1, respectively. Accuracy and applicability of the optimized method was investigated by collecting saliva samples from smokers. Satisfactory percent recovery values wereachieved for cadmium with a low standard deviation in the acceptable range of 84.9-109.6 %.

CONCLUSION

The developed dispersive solvent-free S-SADF-LPME technique presents a fast, simple, cost-effective and eco-friendly microextraction method based on the use of an easily accessible and functional spray apparatus.

Determination of Heavy Metal Ions and Organic Pollutants in Water Samples Using Ionic Liquids and Ionic Liquid-Modified Sorbents

Water pollution, especially by inorganic and organic substances, is considered as a critical problem worldwide. Several governmental agencies are listing an increasing number of compounds as serious problems in water because of their toxicity, bioaccumulation, and persistence. In recent decades, there has been considerable research on developing analytical methods of heavy metal ions and organic pollutants from water. Ionic liquids, as the environment-friendly solvents, have been applied in the analytical process owing to their unique physicochemical properties. This review summarizes the applications of ionic liquids in the determination of heavy metal ions and organic pollutants in water samples. In addition, some sorbents that were modified physically or chemically by ionic liquids were applied in the adsorption of pollutants. According to the results in all references, the application of new designed ionic liquids and related sorbents is expected to increase in the future.

A new efficient indigenous material for simultaneous removal of fluoride and inorganic arsenic species from groundwater

The contaminated groundwater is one of emerging environmental issue in Pakistan and biosorbent considered to be the best alternative to improve the quality of groundwater. Thus, an indigenous biosorbent, Cucumis pubescens (peel of fruit) has been carried out efficiently for simultaneous removal of arsenic species and fluoride from groundwater. The characterization of bio-sorbent for removal of As species (As^III, As^V) and F^- was studied by FTIR spectroscopy and SEM. Batch experiments were carried out for the optimization of adsorption capacity at different parameters such as pH (3-11), concentration of biosorbates (100-500 μg/L) for As species and F^- ion), biosorbent dose (2-6 g/L), contact time (10-60 min) and temperature (303-323 K). The influence of common ions was also investigated. The different biosorption isotherms were applied to determine the most appropriate equilibrium curves for the removal/biosorption of As species and F^- by a biosorbents. The mean sorption energy calculated from Dubinin-Radushkevich model, indicated chemisorptions phenomena. Thermodynamic parameters indicated the biosorption phenomena of As^III, As^V and F- ions were spontaneous and exothermic. The removal study of study analytes indicated that the sorption kinetics based on pseudo-second-order equation.

Ultrasonic-energy enhance the ionic liquid-based dual microextraction to preconcentrate the lead in ground and stored rain water samples as compared to conventional shaking method

An efficient preconcentration technique based on ultrasonic-assisted ionic liquid-based dual microextraction (UA-ILDµE) method has been developed to preconcentrate the lead (Pb⁺²) in ground and stored rain water. In the current proposed method, Pb⁺² was complexed with a chelating agent (dithizone), whereas an ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) was used for extraction purpose. The ultrasonic irradiation and electrical shaking system were applied to enhance the dispersion and extraction of Pb⁺² complex in aqueous samples. For second phase, dual microextraction (DµE phase), the enriched Pb⁺² complex in ionic liquid, extracted back into the acidic aqueous solution and finally determined by flame atomic absorption spectrometry. Some major analytical parameters that influenced the extraction efficiency of developed method, such as pH, concentration of ligand, volume of ionic liquid and samples, time of shaking in thermostatic electrical shaker and ultrasonic bath, effect of back extracting HNO₃ volume, matrix effect, centrifugation time and rate were optimized. At the sample volume of 25mL, the calculated preconcentration factor was 62.2. The limit of detection of proposed procedure for Pb⁺² ions was found to be 0.54μgL^-1. The validation of developed method was performed by the analysis of certified sample of water SRM 1643e and standard addition method in a real water sample. The extraction recovery of Pb⁺² was enhanced≥2% with shaking time of 80s in ultrasonic bath as compared to used thermostatic electrical shaker, where for optimum recovery up to 10min was required. The developed procedure was successfully used for the enrichment of Pb⁺² in ground and stored rain water (surface water) samples of an endemic region of Pakistan. The resulted data indicated that the ground water samples were highly contaminated with Pb⁺², while some of the surface water samples were also have higher values of Pb⁺² than permissible limit of WHO. The concentration of Pb⁺² in surface and ground water samples was found in the range of 17.5-24.5 and 25.6-99.1μgL^-1 respectively.

Chromium Exposure in the Adult Population, Consuming Different Types of Smokeless Tobacco Products in Pakistan

The pervasive smokeless tobacco (SLT) consumption and diseases related to its use is a hot topic for the public discussion. In this study, concentrations of chromium (Cr) were measured in different SLT products [snuff (dry and moist), mainpuri, and gutkha] offered and used in Pakistan. The current study was also designed to assess the Cr levels in the biological (scalp hair and blood) samples of male and female subjects, age ranged from 25 to 60 years, chewing different SLT products. For comparative purpose, the healthy persons of the same age group, who did not consume any SLT products, were selected as referents. The concentrations of Cr in SLT products and biological samples were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials (CRMs). The resulted data indicated that the adult persons, who consumed different SLT products, have 2-3 fold higher levels of Cr in biological samples as compared to referent subjects (p < 0.01). The persons, who chew/sniff different SLT products, have 50-80 and 42-82 % higher levels of Cr in their scalp hair and blood samples as related to referents. The daily intake of Cr is lower as compared to the recommended value of 50-200 μg/day. It was expected that 10 g consumption of various kinds of SLT products (snuff, mainpuri, and gutkha) may subsidize 21.2-220, 17.7-122, and 18.4-273 % of the recommended daily intake of Cr, respectively.

Biosorptive removal of inorganic arsenic species and fluoride from aqueous medium by the stem of Tecomella undulate

Simultaneous removal of fluoride (F(-)), inorganic arsenic species, As(III) and As(V), from aqueous samples has been performed using an economic indigenous biosorbent (Stem of Tecomella undulata). The inorganic As species in water samples before and after biosorption were determined by cloud point and solid phase extraction methods, while F(-) was determined by ion chromatography. Batch experiments were carried out to evaluate the equilibrium adsorption isotherm studies for As(III), As(V) and F(-) in aqueous solutions. Several parameters of biosorption were optimized such as pH, biomass dosage, analytes concentration, time and temperature. The surface of biosorbent was characterized by SEM and FTIR. The FTIR study indicated the presence of carbonyl and amine functional groups which may have important role in the sorption/removal of these ions. Thermodynamic and kinetic study indicated that the biosorption of As(III), As(V) and F(-) were spontaneous, exothermic and followed by pseudo-second-order. Meanwhile, the interference study revealed that there was no significant effect of co-existing ions for the removal of inorganic As species and F(-) from aqueous samples (p > 0.05). It was observed that the indigenous biosorbent material simultaneously adsorbed As(III) (108 μg g(-1)), As(V) (159 μg g(-1)) and F(-) (6.16 mg g(-1)) from water at optimized conditions. The proposed biosorbent was effectively regenerated and efficiently used for several experiments, to remove the As(III), As(V) and F(-) from real water sample collected from endemic area of Pakistan.

Application of Cloud Point Extraction for Cadmium in Biological Samples of Occupationally Exposed Workers: Relation Between Cadmium Exposure and Renal Lesion

Cadmium (Cd) level in blood and urine of soldering iron workers (n=49) and 41 matched healthy controls has been assessed. Cloud point extraction was employed for preconcentration of Cd. The Cd ions formed hydrophobic complex with 9,10-phenanthraquinone monoethyl thiosemicarbazone that was extracted by surfactant-rich phases in the nonionic surfactant Triton X-114. The surfactant-rich phase was diluted with 1 M HNO3 in methanol prior to its analysis by graphite furnace atomic absorption spectrometry. The parameters affecting the extraction efficiency of the proposed method, such as solution pH, amount of complexing agent, surfactant concentration, temperature, and incubation time, were optimized. Under the optimum experimental conditions, the detection limit and the enrichment factor were 0.04 μg L(-1) and 61, respectively. Relative standard deviation of 10 μg L(-1) Cd was less than 3.0%. The accuracy of the method was examined by analysis of certified reference materials. It was observed that soldering iron workers are liable to Cd overload as indicated by higher levels of Cd in blood and urine when compared with the controls. This exposure may lead to kidney damage indicated by elevation of urinary excretion of both N-acetyl-β-D-glucosaminidase and β2-microglobulin.

Estimation of Nickel in Different Smokeless Tobacco Products and Their Impact on Human Health of Oral Cancer Patients

It has been extensively investigated that the chewing of smokeless tobacco (SLT) products may enhance the inflammation of the oral cavity. The aim of the present study is to evaluate the relationship between nickel (Ni) exposure via different SLT products with oral cancer (different sites) incidence in the population of Sindh, Pakistan. The different brands of SLT products (mainpuri, gutkha, and moist snuff) commonly consumed by the studied population were analyzed for Ni contents. The biological samples of oral cancer patients and noncancerous control subjects of both genders, who have or have not consumed SLT products, were collected. The concentration of Ni in biological samples and SLT products were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by using certified reference materials. The results of this study showed that the Ni level was significantly higher in scalp hair and blood samples of oral cancer patients compared to controls (P < 0.01). The study suggested that exposure of Ni as a result of chewing different SLT products may be synergistic with risk factors associated with oral cancer.

Estimation of lead in biological samples of oral cancer patients chewing smokeless tobacco products by ionic liquid-based microextraction in a single syringe system

Several studies have reported that the chewing habit of smokeless tobacco (SLT) has been associated with oral cancer. The aim of the present study was to evaluate the trace levels of lead (Pb) in biological samples (blood, scalp hair) of oral cancer patients and referents of the same age group (range 30-60 years). As the concentrations of Pb are very low in biological samples, so a simple and efficient ionic liquid-based microextraction in a single syringe system has been developed, as a prior step to determination by flame atomic absorption spectrometry. In this procedure, the hydrophobic chelates of Pb with ammonium pyrrolidinedithiocarbamate (APDC) were extracted into fine droplets of 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6] within a syringe while using Triton X-114 as a dispersant. Factors influencing the microextraction efficiency and determination, such as pH of the sample, volume of [C4MIM][PF6] and Triton X-114, ligand concentration, and incubation time, were studied. To validate the proposed method, certified reference materials were analyzed and the results of Pb(2+) were in good agreement with certified values. At optimum experimental values of significant variables, detection limit and enhancement factor were found to be 0.412 μg/L and 80, respectively. The coexisting ions showed no obvious negative outcome on Pb preconcentration. The proposed method was applied satisfactorily for the preconcentration of Pb(2+) in acid-digested SLT and biological samples of the study population. It was observed that oral cancer patients who consumed different SLT products have 2-3-fold higher levels of Pb in scalp hair and blood samples as compared to healthy referents (p < 0.001). While 31.4-50.8% higher levels of Pb were observed in referents chewing different SLT products as compared to nonconsumers (p < 0.01).

Evaluated the levels of lead and cadmium in scalp hair of adolescent boys consuming different smokeless tobacco products with related to controls

The present study was aimed to evaluate the cadmium (Cd) and lead (Pb) levels in the scalp hair samples of adolescent boys age ranged 12-15 years, chewing different smokeless tobacco (SLT) products. For comparative purpose, boys of the same age group who did not consume any SLT products were selected as referents. The concentrations of Cd and Pb in SLT products and the scalp hair samples were measured by electrothermal atomic absorption spectrophotometer (ETAAS) after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials (CRMs). The difference between experimental and certified values of both elements was not significant (p > 0.05). The resulted data indicated that the adolescent boys who consumed different SLT products have two- to threefold higher levels of Cd and Pb in the scalp hair samples as compared to the referent boys (p < 0.01). The adolescent chewing different SLT products have 82.2-110 and 60.6-94.5% higher levels of Cd and Pb, respectively, in their scalp hair as related to the referents.

A new solid phase microextraction method using organic ligand in micropipette tip syringe system packed with modified carbon cloth for preconcentration of cadmium in drinking water and blood samples of kidney failure patients

A simple and efficient miniaturized solid phase microextraction (M-SPμE) in a syringe system was developed for preconcentration of cadmium (Cd) in environmental and biological samples, followed by flame atomic absorption technique. The syringe system contains the micropipette tip packed with activated carbon cloth, coated with modified magnetic nanoparticles of iron oxide Triton X114 (ACC-NPs). Scanning electron microscopy and energy dispersive spectroscopy used for characterization of the size, morphology and elemental composition of ACC-NPs. The sample solution treated with a complexing reagent 8-hydroxyqunilone (8-HQ), and drawn into the syringe, filled with ACC-MNPs and dispensed manually for 2-10 drawing/discharging cycles. The analyte retained on ACC-NPs in micropipette tip-syringe system were then eluted with different volume of 1.5molL(-1) HCl by 1-5 drawing/discharging cycles. The syringe system directly couple with FAAS for analysis. The influence of different variables on the extraction efficiency of Cd, including adsorbent dosage, pH, sample volume, eluent volume and drawing/discharging cycles of syringe system were optimized. At optimized extraction conditions, the method showed good linearity in the range of 5-250μgL(-1), with a limit of detection 0.15μgL(-1). Repeatability of the extraction (%RSD) was <5%, n=5. The validity and accuracy of the method was checked by the certified reference materials. The proposed method was successfully applied for the determination of Cd in different drinking water and biological samples of kidney failure patients and healthy controls.

Temperature-controlled ionic liquid-based ultrasound-assisted microextraction for preconcentration of trace quantity of cadmium and nickel by using organic ligand in artificial saliva extract of smokeless tobacco products

A new approach was developed for the preconcentration of cadmium (Cd) and nickel (Ni) in artificial saliva extract of dry snuff (brown and black) products using temperature-controlled ionic liquid-based ultrasound-assisted dispersive liquid-liquid microextraction (TIL-UDLLμE) followed by electrothermal atomic absorption spectrometry (ETAAS). The Cd and Ni were complexed with ammonium pyrrolidinedithiocarbamate (APDC), extracted in ionic liquid drops, 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6]. The multivariate strategy was applied to estimate the optimum values of experimental variables influence the % recovery of analytes by TIL-UDLLμE method. At optimum experimental conditions, the limit of detection (3s) were 0.05 and 0.14μgL(-1) while relative standard deviations (% RSD) were 3.97 and 3.55 for Cd and Ni respectively. After extraction, the enhancement factors (EF) were 87 and 79 for Cd and Ni, respectively. The RSD for six replicates of 10μgL(-1) Cd and Ni were 3.97% and 3.55% respectively. To validate the proposed method, certified reference material (CRM) of Virginia tobacco leaves was analyzed, and the determined values of Cd and Ni were in good agreement with the certified values. The concentration of Cd and Ni in artificial saliva extracts corresponds to 39-52% and 21-32%, respectively, of the total contents of both elements in dry brown and black snuff products.

Application of dual-cloud point extraction for the trace levels of copper in serum of different viral hepatitis patients by flame atomic absorption spectrometry: a multivariate study

An efficient, innovative preconcentration method, dual-cloud point extraction (d-CPE) has been developed for the extraction and preconcentration of copper (Cu(2+)) in serum samples of different viral hepatitis patients prior to couple with flame atomic absorption spectrometry (FAAS). The d-CPE procedure was based on forming complexes of elemental ions with complexing reagent 1-(2-pyridylazo)-2-naphthol (PAN), and subsequent entrapping the complexes in nonionic surfactant (Triton X-114). Then the surfactant rich phase containing the metal complexes was treated with aqueous nitric acid solution, and metal ions were back extracted into the aqueous phase, as second cloud point extraction stage, and finally determined by flame atomic absorption spectrometry using conventional nebulization. The multivariate strategy was applied to estimate the optimum values of experimental variables for the recovery of Cu(2+) using d-CPE. In optimum experimental conditions, the limit of detection and the enrichment factor were 0.046μgL(-1) and 78, respectively. The validity and accuracy of proposed method were checked by analysis of Cu(2+) in certified sample of serum (CRM) by d-CPE and conventional CPE procedure on same CRM. The proposed method was successfully applied to the determination of Cu(2+) in serum samples of different viral hepatitis patients and healthy controls.

Evaluation of fresh and stored rainwater quality in fluoride and arsenic endemic area of Thar Desert, Pakistan

In the current study, the chemistry of fresh and stored rainwater of Thar Desert, Pakistan, was estimated during two consecutive monsoon periods. The present research deals with the variation in physicochemical parameters, total arsenic (As(t)), inorganic arsenic species (As(i), As(V), As(III)), and fluoride (F(-)) in stored rainwater (SRW) at different time intervals (1 week to 3 months). The pH of fresh rainwater (FRW) samples showed slightly acidic to neutral in nature (6.08-7.06) which were inconsistent with the reference pH value (5.6) of rainwater. The resulted data indicated that As(t) and F(-) levels in SRW were enhanced with time duration. The levels of As(t) and F(-) in SRW after different time intervals were found in the range of 194-683 μg/L and 10-35.4 mg/L, respectively. The values of As(t) and F(-) were 20-70 and 7-24 times higher than those of WHO permissible limits, 10 μg/L and 1.5 mg/L, respectively. The As(III) was dominant species in SRW, which corresponds to >60 % of As(i). The characteristics of the SRW revealed an unacceptable quality to consume for drinking and agricultural purposes in the studied area.

Determination of nickel in blood and serum samples of oropharyngeal cancer patients consumed smokeless tobacco products by cloud point extraction coupled with flame atomic absorption spectrometry

Oropharyngeal cancer is a significant public health issue in the world. The incidence of oropharyngeal cancer has been increased among people who have habit of chewing smokeless tobacco (SLT) in Pakistan. The aim of present study was to evaluate the concentration of nickel (Ni) in biological samples (whole blood, serum) of oral (n = 95) and pharyngeal (n = 84) male cancer patients. For comparison purposes, the biological samples of healthy age-matched referents (n = 150), who consumed and did not consumed SLT products, were also analyzed for Ni levels. As the Ni level is very low in biological samples, a preconcentration procedure has been developed, prior to analysis of analyte by flame atomic absorption spectrometry (FAAS). The Ni in acid-digested biological samples was complexed with ammonium pyrrolidinedithio carbamate (APDC), and a resulted complex was extracted in a surfactant Triton X-114. Acidic ethanol was added to the surfactant-rich phase prior to its analysis by FAAS. The chemical variables, such as pH, amounts of reagents (APDC, Triton X-114), temperature, incubation time, and sample volume were optimized. The resulted data indicated that concentration of Ni was higher in blood and serum samples of cancer patients as compared to that of referents who have or have not consumed different SLT products (p = 0.012-0.001). It was also observed that healthy referents who consumed SLT products have two to threefold higher levels of Ni in both biological samples as compared to those who were not chewing SLT products (p < 0.01).