The Biopharmaceutics Classification System: subclasses for in vivo predictive dissolution (IPD) methodology and IVIVC

Playing Hide-and-Seek with Tyrosine Kinase Inhibitors: Can We Overcome Administration Challenges?

Tyrosine kinase inhibitors (TKIs) have demonstrated significant efficacy against various types of cancers through molecular targeting mechanisms. Over the past 22 years, more than 100 TKIs have been approved for the treatment of various types of cancer indicating the significant progress achieved in this research area. Despite having significant efficacy and ability to target multiple pathways, TKIs administration is associated with challenges. There are reported inconsistencies between observed food effect and labeling administration, challenges of concomitant administration with acid-reducing agents (ARA), pill burden and dosing frequency. In this context, the objective of present review is to visit administration challenges of TKIs and effective ways to tackle them. We have gathered data of 94 TKIs approved in between 2000 and 2022 with respect to food effect, ARA impact, administration schemes (food and PPI restrictions), number of pills per day and administration frequency. Further, trend analysis has been performed to identify inconsistencies in the labeling with respect to observed food effect, molecules exhibiting ARA impact, in order to identify solutions to remove these restrictions through novel formulation approaches. Additionally, opportunities to reduce number of pills per day and dosing frequency for better patient compliance were suggested using innovative formulation interventions. Finally, utility of physiologically based pharmacokinetic modeling (PBPK) for rationale formulation development was discussed with literature reported examples. Overall, this review can act as a ready-to-use-guide for the formulation, biopharmaceutics scientists and medical oncologists to identify opportunities for innovation for TKIs.

Rerouting cardiovascular management following gastric bypass surgery: Dose optimization of carvedilol using population-based analysis

AIMS

A population-based pharmacokinetic (PK) modeling approach (PopPK) was used to investigate the impact of Roux-en-Y gastric bypass (RYGB) on the PK of (R)- and (S)-carvedilol. We aimed to optimize carvedilol dosing for these patients utilizing a pharmacokinetic/pharmacodynamic (PK/PD) link model.

METHODS

PopPK models were developed utilizing data from 52 subjects, including nonobese, obese, and post- RYGB patients who received rac- carvedilol orally. Covariate analysis included anthropometric and laboratory data, history of RYGB surgery, CYP2D6 and CYP3A4 in vivo activity, and relative intestinal abundance of major drug- metabolizing enzymes and transporters. A direct effect inhibitory Emax pharmacodynamic model was linked to the PK model of (S)- carvedilol to simulate the changes in exercise- induced heart rate.

RESULTS

A 2-compartmental model with linear elimination and parallel first-order absorptions best described (S)-carvedilol PK. RYGB led to a twofold reduction in relative oral bioavailability compared to nonoperated subjects, along with delayed absorption of both enantiomers. The intestinal ABCC2 mRNA expression increases the time to reach the maximum plasma concentration. The reduced exposure (AUC) of (S)-carvedilol post-RYGB corresponded to a 33% decrease in the predicted area under the effect curve (AUEC) for the 24-hour β-blocker response. Simulation results suggested that a 50-mg daily dose in post-RYGB patients achieved comparable AUC and AUEC to 25-mg dose in nonoperated subjects.

CONCLUSION

Integrated PK/PD modeling indicated that standard dosage regimens for nonoperated subjects do not provide equivalent β-blocking activity in RYGB patients. This study highlights the importance of personalized dosing strategies to attain desired therapeutic outcomes in this patient cohort.

Solid dispersion systems for enhanced dissolution of poorly water-soluble candesartan cilexetil: In vitro evaluation and simulated pharmacokinetics studies

BACKGROUND

Candesartan cilexetil (CC) is a selective angiotensin II receptor antagonist widely used to treat hypertension. CC is a substrate of P-glycoprotein (P-gp), causing its efflux to the intestinal lumen. It is also practically insoluble in water and has low oral bioavailability (14%). Thus, the current study aims to improve the in vitro dissolution of CC by developing solid dispersion systems (SDSs) and corroborating the in vitro results using a simulated pharmacokinetics study.

METHODS

The SDSs were prepared using polyvinyl pyrrolidone (PVP) as a water-soluble polymer, Eudragit E100 (EE100) as a pH-dependent soluble carrier, and a combination of these two polymers. The saturation solubility and the dissolution rate studies of the prepared systems in three dissolution media were performed. The optimized system SE-EE5 was selected for further investigations, including DSC, XRD, FTIR, FESEM, DLS, TSEM, IVIVC convolution study, and stability studies.

RESULTS

The solubility of CC significantly increased by a factor of 27,037.344 when formulated as a solid dispersion matrix using EE100 at a ratio of 1:5 (w/w) drug to polymer (SE-EE5 SD), compared to the solubility of the pure drug. The mechanism of solubility and dissolution rate enhancement of CC by the optimized SDS was found to be via the conversion of the crystalline CC into the amorphous form as well as nanoparticles formation upon dissolution at a pH below 5. The instrumental analysis tests showed good compatibility between CC and EE100 and there was no chemical interaction between the drug and the polymer. Moreover, the stability tests confirmed that the optimized system was stable after three months of storage at 25°C.

CONCLUSION

The utilization of the solid dispersion technique employing EE 100 polymer as a matrix demonstrates significant success in enhancing the solubility, dissolution, and subsequently, the bioavailability of water-insoluble drugs like CC.

Designing starch-based fenofibrate formulations using the melting method

Fenofibrate (FNF) is used to treat hyperlipidemia. However, FNF is a poorly water-soluble drug, and the dosage of commercial products is relatively high at 160 mg in a Lipidil® tablet. Therefore, this study aimed to develop an FNF-solid dispersion (SD) that solubilizes and stabilizes FNF. The melting method that uses the low melting point of FNF was employed. The dissolution percentage of FNF in the optimal formulation (SD2) increased by 1.2-, 1.3-, and 1.3-fold at 5 min compared to that of Lipidil® and increased by 2.0-, 2.1-, and 2.0-fold compared to the pure FNF in pH 1.2 media, distilled water, and pH 6.8 buffer, which included 0.025 M sodium lauryl sulfate, respectively. The SD2 formulation showed a dissolution percentage of nearly 100 % in all dissolution media after 60 min. The physicochemical properties of the SD2 formulation exhibited slight changes in the melting point and crystallinity of FNF. Moreover, the stability of the SD2 formulation was maintained for six months. In particular, it was challenging to secure stability when starch#1500 was excluded from the SD2 formulation. In conclusion, the dissolution percentage of FNF in the SD2 formulation was improved owing to the weak binding force between FNF and the excipients, stability was secured, and favorable results are expected in future animal experiments.

Lymphatic Uptake of a Highly Lipophilic Protease Inhibitor Prodrug from a Lipid-Based Formulation is Limited by Instability in the Intestine

Dabigatran etexilate (DABE) is a lipophilic double alkyl ester prodrug of dabigatran (DAB) which is a serine protease inhibitor used clinically as an anticoagulant. Recently, translocation of serine protease enzymes, including trypsin, from the gut into the mesenteric lymph and then blood has been associated with organ failure in acute and critical illnesses (ACIs). Delivery of DABE into mesenteric lymph may thus be an effective strategy to prevent organ failure in ACIs. Most drugs access the mesenteric lymph in low quantities following oral administration, as they are rapidly transported away from the intestine via the blood. Here, we examine the potential to deliver DABE into the mesenteric lymph by promoting association with lymph lipid transport pathways via co-administration with a lipid-based formulation (LBF). A series of self-emulsifying LBFs were designed and tested in vitro for their potential to form stable DABE loaded emulsions and keep DABE solubilised and stable over time in simulated gastrointestinal conditions. The LBFs were found to form fine emulsions with a droplet size of 214 ± 30 nm and DABE was stable in the formulation. The stability of DABE in vitro in simulated intestinal conditions, plasma and lymph samples was also evaluated to ensure stability in collected samples and to evaluate whether the prodrug is likely to release active DAB. Ultimately, a highly uniform and stable self-emulsifying Type III A LBF of DABE was chosen for progression into in vivo studies in male Sprague Dawley rats to confirm the lymphatic uptake and plasma pharmacokinetics. Both in vitro and in vivo in plasma and lymph, DABE was rapidly converted to an intermediate and DAB. The main species present in vivo in both plasma and lymph was DAB and mass transport of DABE and DAB in lymph was minimal (∼0.5 % of dose). Importantly, the concentration of DABE in lymph was substantially (20-176 fold) higher than in plasma, supporting that if the prodrug were stable and did not convert to DAB in the intestine, it would be lymphatically transported. Future studies will therefore focus on optimizing the design of the prodrug and formulation to improve stability during absorption and further promote lymphatic uptake.

A Comprehensive Review on Novel Lipid-Based Nano Drug Delivery

Novel drug delivery system opens the doors towards nano/micro formulation strategies to overcome the challenges associated with the poorly soluble and permeable drugs. Lipid based nanoparticles are widely accepted that includes liposomes, niosomes and micelles which are FDA approved. Such lipid based drug delivery allows delivery for natural phytoconstituents, biopharmaceutical classification system (BCS) class II and class IV drugs are effectively delivered to improve its solubility, permeability and bioavailability. The article provides the recent advances and application of lipid based dosage form for improvement of therapeutic efficacy.

Rising role of 3D-printing in delivery of therapeutics for infectious disease

Modern drug delivery to tackle infectious disease has drawn close to personalizing medicine for specific patient populations. Challenges include antibiotic-resistant infections, healthcare associated infections, and customizing treatments for local patient populations. Recently, 3D-printing has become a facilitator for the development of personalized pharmaceutic drug delivery systems. With a variety of manufacturing techniques, 3D-printing offers advantages in drug delivery development for controlled, fine-tuned release and platforms for different routes of administration. This review summarizes 3D-printing techniques in pharmaceutics and drug delivery focusing on treating infectious diseases, and discusses the influence of 3D-printing design considerations on drug delivery platforms targeting these diseases. Additionally, applications of 3D-printing in infectious diseases are summarized, with the goal to provide insight into how future delivery innovations may benefit from 3D-printing to address the global challenges in infectious disease.

A novel theoretical strategy for predicting dissolution kinetics and mechanisms of pharmaceuticals in complex biorelevant media

The influence mechanism of biorelevant media on the dissolution of active pharmaceutical ingredients (APIs) is the key to their formulation design. The dissolution kinetics of naproxen (NAP) and indomethacin (IND) in biorelevant media was systematically investigated. The dissolution mechanism was analyzed by chemical potential gradient model to explore the influence of surfactant type, pH and ionic strength. Hexadecyl trimethyl ammonium bromide (CTAB) is superior to sodium dodecyl sulfate (SDS) in promoting the dissolution of NAP and IND by increasing the solubility and accelerating the surface reaction processes. The electrostatic repulsion between SDS and NAP and IND with the same negative charge facilitates the diffusion of API, while the mutual attraction between CTAB and NAP and IND is not conducive to diffusion. High pH was favorable for the dissolution of acidic NAP and IND, as the simultaneous increase in solubility, surface reaction constant, and diffusion constant. High ionic strength was beneficial for the surface reaction of NAP and IND, but hindered their diffusion. It was shown that the modeling results were in conformity with the in vitro experimental data. These results are expected to provide theoretical supports for the design of biorelevant media and pharmaceutical formulations in the pharmaceutical development.

Oral liposomal delivery of an activatable budesonide prodrug reduces colitis in experimental mice

Inflammatory bowel disease (IBD) is one of the most common intestinal disorders, with increasing global incidence and prevalence. Numerous therapeutic drugs are available but require intravenous administration and are associated with high toxicity and insufficient patient compliance. Here, an oral liposome that entraps the activatable corticosteroid anti-inflammatory budesonide was developed for efficacious and safe IBD therapy. The prodrug was produced via the ligation of budesonide with linoleic acid linked by a hydrolytic ester bond, which was further constrained into lipid constituents to form colloidal stable nanoliposomes (termed budsomes). Chemical modification with linoleic acid augmented the compatibility and miscibility of the resulting prodrug in lipid bilayers to provide protection from the harsh environment of the gastrointestinal tract, while liposomal nanoformulation enables preferential accumulation to inflamed vasculature. Hence, when delivered orally, budsomes exhibited high stability with low drug release in the stomach in the presence of ultra-acidic pH but released active budesonide after accumulation in inflamed intestinal tissues. Notably, oral administration of budsomes demonstrated favorable anti-colitis effect with only ∼7% mouse body weight loss, whereas at least ∼16% weight loss was observed in other treatment groups. Overall, budsomes exhibited higher therapeutic efficiency than free budesonide treatment and potently induced remission of acute colitis without any adverse side effects. These data suggest a new and reliable approach for improving the efficacy of budesonide. Our in vivo preclinical data demonstrate the safety and increased efficacy of the budsome platform for IBD treatment, further supporting clinical evaluation of this orally efficacious budesonide therapeutic.

Digitalizing the TIM-1 Model Using Computational Approaches─Part Two: Digital TIM-1 Model in GastroPlus

A TIM-1 model is an in vitro gastrointestinal (GI) simulator considering crucial physiological parameters that will affect the in vivo drug release process. The outcome of these experiments can indicate the critical bioavailability attributes (CBAs) that will impact the fraction absorbed in vivo. The model is widely used in the nonclinical stage of drug product development to assess the bioaccessible fraction of drugs for numerous candidate formulations. In this work, we developed a digital TIM-1 model in the GastroPlus platform. In a first step, we performed validation experiments to assess the luminal concentrations and bioaccessible fractions for two marker compounds. The digital TIM-1 was able to adequately reflect the luminal concentrations and bioaccessible fractions of these markers under different prandial conditions, confirming the appropriate integration of mass transfer in the TIM-1 model. In a second set of experiments, a case example with PF-07059013 was performed, where luminal concentrations and bioaccessible fractions were predicted for 200 and 1000 mg doses under fasted and achlorhydric conditions. Experimental and simulated data pointed out that the achlorhydric effect was more pronounced at the 1000 mg dose, showing a solubility-limited dissolution and, consequently, decreased bioaccessible fraction. Toward future applications, the digital TIM-1 model will be thoroughly applied to explore a link between in vitro and in vivo outcomes based on more case examples with model compounds with the access of TIM-1 and plasma data. Ideally, this digital TIM-1 can be directly used in GastroPlus to explore an in vitro-in vivo correlation (IVIVC) between the fraction dissolved (digital TIM-1 settings) and the fraction absorbed (human PBPK settings).

Revisiting Supersaturation of a Biopharmaceutical Classification System IIB Drug: Evaluation via a Multi-Cup Dissolution Approach and Molecular Dynamic Simulation

As a subclass of the biopharmaceutical classification system (BCS) class II, basic drugs (BCS IIB) exhibit pH-dependent solubility and tend to generate supersaturation in the gastrointestinal tract, leading to less qualified in vitro-in vivo correlation (IVIVC). This study aims to develop a physiologically based multi-cup dissolution approach to improve the evaluation of the supersaturation for a higher quality of IVIVC and preliminarily explores the molecular mechanism of supersaturation and precipitation of ketoconazole affected by Polyvinylpyrrolidone-vinyl acetate copolymer (PVPVA) and hydroxypropyl methyl-cellulose (HPMC). The concentration of ketoconazole in each cup of the dynamic gastrointestinal model (DGIM) was measured using fiber optical probes. Molecular interactions between ketoconazole and PVPVA or HPMC were simulated by Materials Studio. The results demonstrated that PVPVA and HPMC improved and maintained the supersaturation of ketoconazole. PVPVA exhibited superior precipitation inhibitory effect on ketoconazole molecule aggregation due to slightly stronger van der Waals forces as well as unique electrostatic forces, thereby further enhancing in vitro drug absorption, which correlated well with in vivo drug absorption. Compared with a conventional dissolution apparatus paddle method, the DGIM improved the mean prediction error through the IVIVC from 19.30% to 9.96%, reaching the qualification criteria. In conclusion, the physiologically based multi-cup dissolution approach enables improved evaluation of supersaturation in gastrointestinal transportation of BCS IIB drug ketoconazole, enabling screening screen precipitation inhibitors and achieving qualified IVIVC for drug formulation studies.

Crushed Tablet Administration for Patients with Dysphagia and Enteral Feeding: Challenges and Considerations

Dysphagia is increasingly common in older adults; it is especially prevalent in long-term care settings. Patients with dysphagia likely require pharmacologic treatment for multiple comorbidities but may find it difficult or impossible to swallow oral medications. Administering crushed medications mixed with a soft food or liquid vehicle, or via a feeding tube, is a common strategy to circumvent swallowing difficulties in patients with dysphagia. However, inappropriate medication use and improper crushing technique can reduce the medication dose a patient receives, alter medication pharmacokinetics and pharmacodynamics, and compromise treatment efficacy and patient safety. Clinical judgment is needed to identify medications that can and cannot be crushed, select a crushing methodology and vehicle for administering crushed medications, and create a strategy for administering multiple medications. A coordinated effort from the entire care team-including physicians, pharmacists, nurses, advanced practice providers, speech therapists, patients, and caregivers-is necessary to develop and implement an individualized plan for administering medications to patients with dysphagia. This review details the current literature regarding the administration of medications that have been altered, such as by crushing tablets or opening capsules, for patients with dysphagia or who are receiving enteral feeding and provides recommendations on best practices.

Deep eutectic solvents based on sugars for oral applications

Solubility is a critical parameter in drug formulation to achieve the desired therapeutical concentration. Most drugs are weak acids or bases and, therefore, exhibit low solubility and poor oral availability. The main aim of this work is the use of Deep Eutectic Systems (DESs) for improving the solubility of drugs in aqueous medium. In this case, we use DESs formed by choline chloride and sugars (xylitol, fructose, glucose and sorbitol) at different proportions of water. These compounds present low toxicity, and thus can be used in syrups or liquid formulations. Different physicochemical properties, such as density, refractive index, and surface tension, were obtained. In addition, a rheological study of the different systems was carried out. Finally, these DESs were applied to analyse the solubility of the following active principles: caffeine (Class I) and furosemide (Class IV) of the Biopharmaceutics Classification System (BCS). The selection of the drugs attends to different reasons. On one hand, we want to develop a new liquid formulation for model drug furosemide and, on the other hand, the study of caffeine, instead, will be used as a model for comparing purposes. Solubility results show that the systems that best solubilize caffeine are those with the highest water content; however, they do not reach the levels of solubility of pure water. On the other hand, for furosemide, a great increase in solubility was observed, especially for systems formed by xylitol and, fundamentally, in the system with the lowest water content. Obtaining an increase in solubility of up to 4530 times. These systems provide an opportunity to improve the formulation of drugs in the liquid medium of active ingredients that are poorly soluble in an aqueous medium.

Predictive Potential of Acido-Basic Properties, Solubility and Food on Bioequivalence Study Outcome: Analysis of 128 Studies

BACKGROUND AND OBJECTIVES

Risk assessment related to bioequivalence study outcome is critical for effective planning from the early stage of drug product development. The objective of this research was to evaluate the associations between solubility and acido-basic parameters of an active pharmaceutical ingredient (API), study conditions and bioequivalence outcome.

METHODS

We retrospectively analyzed 128 bioequivalence studies of immediate-release products with 26 different APIs. Bioequivalence study conditions and acido-basic/solubility characteristics of APIs were collected and their predictive potential on the study outcome was assessed using a set of univariate statistical analyses.

RESULTS

There was no difference in bioequivalence rate between fasting and fed conditions. The highest proportion of non-bioequivalent studies was for weak acids (10/19 cases, 53%) and neutral APIs (23/95 cases, 24%). Lower non-bioequivalence occurrence was observed for weak bases (1/15 cases, 7%) and amphoteric APIs (0/16 cases, 0%). The median dose numbers at pH 1.2 and pH 3 were higher and the most basic acid dissociation constant (pKa) was lower in the non-bioequivalent group of studies. Additionally, APIs with low calculated effective permeability (cPeff) or low calculated lipophilicity (clogP) had lower non-bioequivalence occurrence. Results of the subgroup analysis of studies under fasting conditions were similar as for the whole dataset.

CONCLUSION

Our results indicate that acido-basic properties of API should be considered in bioequivalence risk assessment and reveal which physico-chemical parameters are most relevant for the development of bioequivalence risk assessment tools for immediate-release products.

Development and pharmacokinetic evaluation of Neusilin® US2-based S-SNEDDS tablets for bosentan: Fasted and fed states bioavailability, IVIS® real-time biodistribution, and ex-vivo imaging

The study reported here aimed to develop and optimize the S-SNEDDS tablet of bosentan (BOS) and to investigate its pharmacokinetic and biodistribution properties. The BOS-loaded SNEDDS have been developed and characterized in a previous study. The BOS-loaded SNEDDS formulation was converted to S-SNEDDS using Neusilin® US2. The S-SNEDDS tablets were obtained using the direct compression technique, and in vitro dissolution, in vitro lipolysis, and ex-vivo permeability studies of the tablets were performed. The S-SNEDDS tablet and reference tablet (Tracleer®) were administered to male Wistar rats at 50 mg/kg dose by oral gavage in fasted and fed state conditions. The biodistribution of the S-SNEDDS tablet was investigated in Balb/c mice using fluorescent dye. The tablets were dispersed in distilled water before administration to animals. The relationship between in vitro dissolution data and in vivo plasma concentration was examined. The S-SNEDDS tablets showed 2.47, 7.49, 3.70, and 4.39 increases in the percentages of cumulative dissolution in FaSSIF, FeSSIF, FaSSIF-V2, and FeSSIF-V2, respectively, when compared to the reference, and increased the Cmax and AUC 2.65 and 1.28-fold and 4.73 and 2.37-fold in fasted and fed states, respectively, when compared to the reference. S-SNEDDS tablets also significantly reduced interindividual variability in both fasted and fed states (p < 0.05). The XenoLight™ DiR and VivoTag® 680XL labeled S-SNEDDS tablet formulation increased the real-time biodistribution in the body by factors of 2.4 and 3.4 and organ uptake and total emission increased by factors of 2.8 and 3.1, respectively. The IVIVR has been successfully established for S-SNEDDS tablets (R2 > 0.9). The present study confirms the potential of the S-SNEDDS tablet to enhance the in vitro and in vivo performance of BOS.

Recent advances on molecular dynamics-based techniques to address drug membrane permeability with atomistic detail

Several factors affect the passive membrane permeation of small molecules, including size, charge, pH, or the presence of specific chemical groups. Understanding these features is paramount to identifying or designing drug candidates with optimal ADMET properties and this can be achieved through experimental/knowledge-based methodologies or using computational approaches. Empirical methods often lack detailed information about the underlying molecular mechanism. In contrast, Molecular Dynamics-based approaches are a powerful strategy, providing an atomistic description of this process. This technique is continuously growing, featuring new related methodologies. In this work, the recent advances in this research area will be discussed.

Microwave Synthesis of Nanostructured Functionalized Polylactic Acid (nfPLA) for Incorporation Into a Drug Crystals to Enhance Their Dissolution

Active pharmaceutical ingredients that have low aqueous solubility pose a challenge in the field of drug delivery. In this paper we report for the first time the synthesis of nano-structured, hydrophilized polylactic acid (nfPLA) and its application in the delivery of low solubility drugs. Microwave induced acid oxidation was used to generate nfPLA where the oxygen concentration increased from 27.0 percent to 41.0 percent. Also, the original non dispersible PLA was converted to a relatively dispersible form with an average particle size of 131.4 nm and a zeta potential of -23.3 mV. Small quantities of the nfPLA were incorporated into the crystals (0.5 to 2.0 % by weight) of a highly hydrophobic, low solubility antifungal drug Griseofulvin (GF) to form a composite (GF-nfPLA). An antisolvent approach was used for the synthesis of the drug composite. SEM and Raman imaging showed non-uniform distribution of the nfPLA on the crystal surface. The solubility of GF increased from 8.89 µg/mL to as high as 49.67 µg/mL for the GF-nfPLA. At the same time zeta potential changed from -15.4 mV to -39.0 mV, therefore the latter was a relatively stable colloid. Octanol-water partitioning also showed a similar effect as logP reduced from 2.16 for pure GF to 0.55 for GF-nfPLA. In vitro dissolution testing showed six times higher aqueous solubility of GF-nfPLA compared to pure GF. The time for 50 (T50) and 80 % (T80) dissolution reduced significantly for the nfPLA composites; T50 reduced from 40.0 to 14.0 min and T80 reduced form unachievable to 47.0 min. Overall, the PLA which is an FDA approved, bioabsorbable polymer can be used to enhance the dissolution of hydrophobic pharmaceuticals and this can lead to higher efficacy and lower the required dosage for drugs.

Biopharmaceutics Risk Assessment-Connecting Critical Bioavailability Attributes with In Vitro, In Vivo Properties and Physiologically Based Biopharmaceutics Modeling to Enable Generic Regulatory Submissions

Quality risk assessment following ICH Q9 principles is an important activity to ensure optimal clinical efficacy and safety of a drug product. Typically, risk assessment is focused on product performance wherein critical material attributes, formulation variables, and process parameters are evaluated from a manufacturing perspective. Extending ICH Q9 principles to biopharmaceutics risk assessment to identify factors that can impact in vivo performance is an upcoming area. This is evident by recent regulatory trends wherein a new term critical bioavailability attributes (CBA) has been coined to identify such factors. Although significant work has been performed for biopharmaceutics risk assessment for new molecules, there is a need for harmonized biopharmaceutics risk assessment workflow for generic submissions. In this manuscript, we attempted to provide a framework for performing biopharmaceutics risk assessment for generic regulatory submissions. A detailed workflow for performing biopharmaceutics risk assessment includes identification of initial CBA (iCBA), their confirmatory evaluation followed by definition of the control strategy. Tools for biopharmaceutics risk assessment, i.e., bio-discriminatory dissolution method and physiologically based biopharmaceutics modeling (PBBM) were discussed from a practical perspective. Furthermore, a case study for CBA evaluation using PBBM modeling for an extended-release product for regulatory submission has been described using the proposed workflow. Finally, future directions of integrating CBA evaluation, biopharmaceutics risk assessment to the FDA Knowledge Aided Structured Assessment (KASA) initiative, the necessity of risk assessment templates, and knowledge sharing between industry and academia are discussed. Overall, the work described in this manuscript can facilitate and provide guidance for biopharmaceutics risk assessment for generic submissions.

An In Silico Approach toward the Appropriate Absorption Rate Metric in Bioequivalence

In bioequivalence, the maximum plasma concentration (Cmax) is traditionally used as a metric for the absorption rate, despite the fact that there are several concerns. The idea of "average slope" (AS) was recently introduced as an alternative metric to reflect absorption rate. This study aims to further extend the previous findings and apply an in silico approach to investigate the kinetic sensitivity of AS and Cmax. This computational analysis was applied to the C-t data of hydrochlorothiazide, donepezil, and amlodipine, which exhibit different absorption kinetics. Principal component analysis (PCA) was applied to uncover the relationships between all bioequivalence metrics. Monte Carlo simulations of bioequivalence trials were performed to investigate sensitivity. The appropriate programming codes were written in Python for the PCA and in MATLAB^® for the simulations. The PCA verified the desired properties of AS and the unsuitability of Cmax to reflect absorption rate. The Monte Carlo simulations showed that AS is quite sensitive to detecting differences in absorption rate, while Cmax has almost negligible sensitivity. Cmax fails to reflect absorption rate, and its use in bioequivalence gives only a false impression. AS has the appropriate units, is easily calculated, exhibits high sensitivity, and has the desired properties of absorption rate.

Advancement in Solubilization Approaches: A Step towards Bioavailability Enhancement of Poorly Soluble Drugs

A drug's aqueous solubility is defined as the ability to dissolve in a particular solvent, and it is currently a major hurdle in bringing new drug molecules to the market. According to some estimates, up to 40% of commercialized products and 70-90% of drug candidates in the development stage are poorly soluble, which results in low bioavailability, diminished therapeutic effects, and dosage escalation. Because of this, solubility must be taken into consideration when developing and fabricating pharmaceutical products. To date, a number of approaches have been investigated to address the problem of poor solubility. This review article attempts to summarize several conventional methods utilized to increase the solubility of poorly soluble drugs. These methods include the principles of physical and chemical approaches such as particle size reduction, solid dispersion, supercritical fluid technology, cryogenic technology, inclusion complex formation techniques, and floating granules. It includes structural modification (i.e., prodrug, salt formation, co-crystallization, use of co-solvents, hydrotrophy, polymorphs, amorphous solid dispersions, and pH variation). Various nanotechnological approaches such as liposomes, nanoparticles, dendrimers, micelles, metal organic frameworks, nanogels, nanoemulsions, nanosuspension, carbon nanotubes, and so forth have also been widely investigated for solubility enhancement. All these approaches have brought forward the enhancement of the bioavailability of orally administered drugs by improving the solubility of poorly water-soluble drugs. However, the solubility issues have not been completely resolved, owing to several challenges associated with current approaches, such as reproducibility in large scale production. Considering that there is no universal approach for solving solubility issues, more research is needed to simplify the existing technologies, which could increase the number of commercially available products employing these techniques.

Harmonizing Biopredictive Methodologies Through the Product Quality Research Institute (PQRI) Part I: Biopredictive Dissolution of Ibuprofen and Dipyridamole Tablets

Assessing in vivo performance to inform formulation selection and development decisions is an important aspect of drug development. Biopredictive dissolution methodologies for oral dosage forms have been developed to understand in vivo performance, assist in formulation development/optimization, and forecast the outcome of bioequivalence studies by combining them with simulation tools to predict plasma profiles in humans. However, unlike compendial dissolution methodologies, the various biopredictive methodologies have not yet been harmonized or standardized. This manuscript presents the initial phases of an effort to develop best practices and move toward standardization of the biopredictive methodologies through the Product Quality Research Institute (PQRI, https://pqri.org ) entitled "The standardization of in vitro predictive dissolution methodologies and in silico bioequivalence study Working Group." This Working Group (WG) is comprised of participants from 10 pharmaceutical companies and academic institutes. The project will be accomplished in a total of five phases including assessing the performance of dissolution protocols designed by the individual WG members, and then building "best practice" protocols based on the initial dissolution profiles. After refining the "best practice" protocols to produce equivalent dissolution profiles, those will be combined with physiologically based biopharmaceutics models (PBBM) to predict plasma profiles. In this manuscript, the first two of the five phases are reported, namely generating biopredictive dissolution profiles for ibuprofen and dipyridamole and using those dissolution profiles with PBBM to match the clinical plasma profiles. Key experimental parameters are identified, and this knowledge will be applied to build the "best practice" protocol in the next phase.

Synthesis and characterization of citrate soft rice starch: A new strategy of producing disintegrating agent for design drug and resistant starch

Assam soft rice starch (ASRS) and Citric acid-esterified Assam soft rice starch (c-ASRS) were studied extensively. FTIR, CHN, DSC, XRD, SEM, TEM and optical microscope studies were performed for native and modified starches. Powder rearrangements, cohesiveness and flowability were studied by the Kawakita plot. Moisture and ash content was around 9 % and 0.5 %. In vitro digestibility of ASRS and c-ASRS produced functional RS. Paracetamol tablets were prepared using ASRS and c-ASRS as granulating-disintegrating agents through wet granulation methods. The prepared tablets' physical properties, disintegrant properties, in vitro dissolution and dissolution efficiency (DE) were performed. The average particle size was obtained at 6.59 ± 0.355 μm and 8.15 ± 0.168 μm for ASRS and c-ASRS, respectively. All the results were statistically significant at p < 0.05, p < 0.01 and p < 0.001. The amylose content was 6.78 %, classifying it as a low amylose type of starch. The disintegration time was reduced with the increasing concentration of ASRS and c-ASRS and facilitated the immediate release of the model drug from the tablet compact to improve its bioavailability. Therefore, the current investigation concludes that ASRS and c-ASRS can be used as novel and functional materials in pharmaceutical industries due to their unique physicochemical attributes. HYPOTHESIS: The central hypothesis of the current work was to develop citrated starch through a one-step reactive extrusion method and investigate its disintegrants property for pharmaceutical tablets. Extrusion is a continuous, simple, high-speed, low-cost, producing very limited wastewater and gas. Characterization was done through different instrumental techniques to confirm successful esterification. The flow properties were evaluated, and tablets were prepared at a different level of ASRS and c-ASRS (disintegrating agent), followed by the evaluation of tablets to confirm the model drug's dissolution and disintegration efficiency. Finally, in vitro digestibility of both ASRS and c-ASRS was analyzed to establish their potential nutritional benefits.

Cocrystals by Design: A Rational Coformer Selection Approach for Tackling the API Problems

Active pharmaceutical ingredients (API) with unfavorable physicochemical properties and stability present a significant challenge during their processing into final dosage forms. Cocrystallization of such APIs with suitable coformers is an efficient approach to mitigate the solubility and stability concerns. A considerable number of cocrystal-based products are currently being marketed and show an upward trend. However, to improve the API properties by cocrystallization, coformer selection plays a paramount role. Selection of suitable coformers not only improves the drug’s physicochemical properties but also improves the therapeutic effectiveness and reduces side effects. Numerous coformers have been used till date to prepare pharmaceutically acceptable cocrystals. The carboxylic acid-based coformers, such as fumaric acid, oxalic acid, succinic acid, and citric acid, are the most commonly used coformers in the currently marketed cocrystal-based products. Carboxylic acid-based coformers are capable of forming the hydrogen bond and contain smaller carbon chain with the APIs. This review summarizes the role of coformers in improving the physicochemical and pharmaceutical properties of APIs, and deeply explains the utility of afore-mentioned coformers in API cocrystal formation. The review concludes with a brief discussion on the patentability and regulatory issues related to pharmaceutical cocrystals.

Improving solubility of poorly water-soluble drugs by protein-based strategy: A review

Poorly water-soluble drugs are frequently encountered and present a most challengeable difficulty in pharmaceutical development. Poor solubility of drugs can lead to suboptimal bioavailability and therapeutic efficiency. Increasing efforts have been contributed to improve the solubility of poorly water-soluble drugs for better pharmacokinetics and pharmacodynamics. Among various solubility enhancement technologies, protein-based strategy to address poorly water-soluble drugs issues has special interests for natural advantages including versatile interactions between proteins and hydrophobic drugs, biocompatibility, biodegradation, and metabolization of proteins. The protein-drug formulations could be formed by covalent conjugations or noncovalent interactions to facilitate solubility of poorly water-soluble drugs. This review is to summarize the advances using proteins including plant proteins, mammalian proteins, and recombinant proteins, to enhance water solubility of poorly water-soluble drugs.

Synthesis of Microwave Functionalized, Nanostructured Polylactic Co-Glycolic Acid (nfPLGA) for Incorporation into Hydrophobic Dexamethasone to Enhance Dissolution

The low solubility and slow dissolution of hydrophobic drugs is a major challenge for the pharmaceutical industry. In this paper, we present the synthesis of surface-functionalized poly(lactic-co-glycolic acid) (PLGA) nanoparticles for incorporation into corticosteroid dexamethasone to improve its in vitro dissolution profile. The PLGA crystals were mixed with a strong acid mixture, and their microwave-assisted reaction led to a high degree of oxidation. The resulting nanostructured, functionalized PLGA (nfPLGA), was quite water-dispersible compared to the original PLGA, which was non-dispersible. SEM-EDS analysis showed 53% surface oxygen concentration in the nfPLGA compared to the original PLGA, which had only 25%. The nfPLGA was incorporated into dexamethasone (DXM) crystals via antisolvent precipitation. Based on SEM, RAMAN, XRD, TGA and DSC measurements, the nfPLGA-incorporated composites retained their original crystal structures and polymorphs. The solubility of DXM after nfPLGA incorporation (DXM-nfPLGA) increased from 6.21 mg/L to as high as 87.1 mg/L and formed a relatively stable suspension with a zeta potential of -44.3 mV. Octanol-water partitioning also showed a similar trend as the logP reduced from 1.96 for pure DXM to 0.24 for DXM-nfPLGA. In vitro dissolution testing showed 14.0 times higher aqueous dissolution of DXM-nfPLGA compared to pure DXM. The time for 50% (T₅₀) and 80% (T₈₀) of gastro medium dissolution decreased significantly for the nfPLGA composites; T₅₀ reduced from 57.0 to 18.0 min and T₈₀ reduced from unachievable to 35.0 min. Overall, the PLGA, which is an FDA-approved, bioabsorbable polymer, can be used to enhance the dissolution of hydrophobic pharmaceuticals and this can lead to higher efficacy and lower required dosage.

Evaluation and prediction of oral drug absorption and bioequivalence with food-drug interaction

This article reviews the impacts on the in vivo prediction of oral bioavailability (BA) and bioequivalence (BE) based on Biopharmaceutical classification systems (BCS) by the food-drug interaction (food effect) and the gastrointestinal (GI) environmental change. Various in vitro and in silico predictive methodologies have been used to expect the BA and BE of the test oral formulation. Food intake changes the GI physiology and environment, which affect oral drug absorption and its BE evaluation. Even though the pHs and bile acids in the GI tract would have significant influence on drug dissolution and, hence, oral drug absorption, those impacts largely depend on the physicochemical properties of oral medicine, active pharmaceutical ingredients (APIs). BCS class I and III drugs are high soluble drugs in the physiological pH range, food-drug interaction may not affect their BA. On the other hand, BCS class II and IV drugs have pH-dependent solubility, and the more bile acid secretion and the pH changes by food intake might affect their BA. In this report, the GI physiological changes between the fasted and fed states are described and the prediction on the oral drug absorption by food-drug interaction have been introduced.

Evaluation of a Low-Fat Low-Calorie Meal on the Relative Bioavailability of Trametinib and Dabrafenib: Results From a Randomized, Open-Label, 2-Part Study in Healthy Participants

In this randomized, open-label, 2-part, 2 × 2 crossover, phase 1 study, the effect of a low-fat low-calorie (LFLC) meal on the relative bioavailability of a trametinib 2-mg tablet or dabrafenib 150-mg capsule was evaluated in healthy participants. Trametinib adjusted geometric mean ratios (90%CI) of fed : fasted for area under the concentration-time curve (AUC) from time 0 to the last quantifiable concentration and AUC from time 0 extrapolated to infinity were 0.76 (0.71-0.82) and 0.82 (0.77-0.88), respectively. For dabrafenib, the adjusted geometric mean ratios of AUC from time 0 to the last quantifiable concentration and AUC from time 0 extrapolated to infinity (90%CI) for fed:fasted were 0.85 (0.79-0.91) and 0.86 (0.80-0.92), respectively. Consumption of an LFLC meal delayed trametinib and dabrafenib absorption, with an increase in time to maximum concentration of ≈15 and ≈30 minutes, respectively, compared to the fasted state. These findings indicate that consumption of an LFLC meal reduced the bioavailability and delayed the absorption of trametinib and dabrafenib, supporting current recommendations to administer both drugs in the fasting state; however, an occasional LFLC meal is unlikely to affect the pharmacokinetics of the drugs once steady state is reached and, by consequence, not likely to alter the overall intended efficacy.

Salicylanilides and Their Anticancer Properties

Salicylanilides are pharmacologically active compounds with a wide spectrum of biological effects. Halogenated salicylanilides, which have been used for decades in human and veterinary medicine as anthelmintics, have recently emerged as candidates for drug repurposing in oncology. The most prominent example of salicylanilide anthelmintic, that is intensively studied for its potential anticancer properties, is niclosamide. Nevertheless, recent studies have discovered extensive anticancer potential in a number of other salicylanilides. This potential of their anticancer action is mediated most likely by diverse mechanisms of action such as uncoupling of oxidative phosphorylation, inhibition of protein tyrosine kinase epidermal growth factor receptor, modulation of different signaling pathways as Wnt/β-catenin, mTORC1, STAT3, NF-κB and Notch signaling pathways or induction of B-Raf V600E inhibition. Here we provide a comprehensive overview of the current knowledge about the proposed mechanisms of action of anticancer activity of salicylanilides based on preclinical in vitro and in vivo studies, or structural requirements for such an activity.

Nanotechnology: a contemporary therapeutic approach in combating infections from multidrug-resistant bacteria

In the 20th century, the discovery of antibiotics played an essential role in the fight against infectious diseases, including meningitis, typhoid fever, pneumonia and Mycobacterium tuberculosis. The development of multidrug resistance in microflora due to improper antibiotic use created significant public health issues. Antibiotic resistance has increased at an alarming rate in the past few decades. Multidrug-resistant bacteria (superbugs) such as methicillin-resistant Staphylococcus aureus (MRSA) as well as drug-resistant tuberculosis pose serious health implications. Despite the continuous increase in resistant microbes, the discovery of novel antibiotics is constrained by the cost and complexities of discovery of drugs. The nanotechnology has given new hope in combating this problem. In the present review, recent developments in therapeutics utilizing nanotechnology for novel antimicrobial drug development are discussed. The nanoparticles of silver, gold and zinc oxide have proved to be efficient antimicrobial agents against multidrug-resistant Klebsiella, Pseudomonas, Escherichia Coli and MRSA. Using nanostructures as carriers for antimicrobial agents provides better bioavailability, less chances of sub-therapeutic drug accumulation and less drug-related toxicity. Nanophotothermal therapy using fullerene and antibody functionalized nanostructures are other strategies that can prove to be helpful.

The Rat Continuous Intestine Model Predicts the Impact of Particle Size and Transporters on the Oral Absorption of Glyburide

Oral drug absorption is known to be impacted by the physicochemical properties of drugs, properties of oral formulations, and physiological characteristics of the intestine. The goal of the present study was to develop a mathematical model to predict the impact of particle size, feeding time, and intestinal transporter activity on oral absorption. A previously published rat continuous intestine absorption model was extended for solid drug absorption. The impact of active pharmaceutical ingredient particle size was evaluated with glyburide (GLY) as a model drug. Two particle size suspensions of glyburide were prepared with average particle sizes of 42.7 and 4.1 μm. Each suspension was dosed as a single oral gavage to male Sprague Dawley rats, and concentration-time (C-t) profiles of glyburide were measured with liquid chromatography coupled with tandem mass spectrometry. A continuous rat intestine absorption model was extended to include drug dissolution and was used to predict the absorption kinetics of GLY depending on particle size. Additional literature datasets of rat GLY formulations with particle sizes ranging from 0.25 to 4.0 μm were used for model predictions. The model predicted reasonably well the absorption profiles of GLY based on varying particle size and varying feeding time. The model predicted inhibition of intestinal uptake or efflux transporters depending on the datasets. The three datasets used formulations with different excipients, which may impact the transporter activity. Model simulations indicated that the model provides a facile framework to predict the impact of transporter inhibition on drug C-t profiles. Model simulations can also be conducted to evaluate the impact of an altered intestinal lumen environment. In conclusion, the rat continuous intestine absorption model may provide a useful tool to predict the impact of varying drug formulations on rat oral absorption profiles.

Use of In silico Methodologies to Predict the Bioavailability of Oral Suspensions: A Regulatory Approach

BACKGROUND

Oral suspensions are heterogeneous disperse systems, and the particle size distribution, crystalline form of the dispersed solid, and composition of the formulation can be listed as parameters that control the drug dissolution rate and its bioavailability.

OBJECTIVE

The aim of this work was to develop a discriminative dissolution test, which, in association with in silico methodologies, can make it possible to safely anticipate bioavailability problems.

METHODS

Nimesulide and ibuprofen (BCS class II) and cephalexin (BCS class I) oral suspensions were studied. Previously, solid-state structure and particle size in active pharmaceutical ingredients were characterized and the impact of differences on solubility was evaluated for the choice of discriminative medium. Afterwards, particle size distribution (0.1 to 360 μm), dissolution profile, and in vitro permeability in Caco-2 cell of commercial suspensions, were determined. These parameters were used as input for the establishment of the in vitro-in vivo correlation (IVIVC) for the suspensions using the GastroPlus™ with Wagner-Nelson and Loo- Riegelmann deconvolution approach.

RESULTS

The predicted/observed pharmacokinetic model showed good correlation coefficients (r) of 0.960, 0.950, and 0.901, respectively. The IVIVC was established for one nimesulide and two ibuprofen suspensions with r between 0.956 and 0.932, and the percent prediction error (%PE) did not exceed 15%.

CONCLUSION

In this work, we have performed a complete study combining in vitro/in silico approaches with the aim of anticipating the safety and efficacy of oral pharmaceutical suspensions in order to provide a regulatory tool for this category of products in a faster and more economical way.

Some things old, new and borrowed: Delivery of dabrafenib and vemurafenib to melanoma cells via self-assembled nanomicelles based on an amphiphilic dendrimer

Two clinically approved anticancer drugs targeting BRAF in melanoma patients - dabrafenib (DAB) and vemurafenib (VEM) - have been successfully encapsulated into nanomicelles formed upon self-assembly of an amphiphilic dendrimer AD based on two C₁₈ aliphatic chains and a G2 PAMAM head. The process resulted in the formation of well-defined (∼10 nm) core-shell nanomicelles (NMs) with excellent encapsulation efficiency (∼70% for DAB and ∼60% for VEM) and good drug loading capacity (∼27% and ∼24% for DAB and VEM, respectively). Dynamic light scattering (DLS), transmission electron microscopy (TEM), small-angle x-ray scattering (SAXS), nuclear magnetic resonance (NMR), isothermal titration calorimetry (ITC), and molecular simulation (MS) experiments were used, respectively, to determine the size and structure of the empty and drug-loaded nanomicelles (DLNMs), along with the interactions between the NMs and their cargoes. The in vitro release data revealed profiles governed by Fickian diffusion; moreover, for both anticancer molecules, an acidic environment (pH = 5.0) facilitated drug release with respect to physiological pH conditions (pH = 7.4). Finally, both DAB- and VEM-loaded NMs elicited enhanced response with respect to free drug treatments in 4 different melanoma cell lines.

Surfactant Mediated Accelerated and Discriminatory In Vitro Drug Release Method for PLGA Nanoparticles of Poorly Water-Soluble Drug

In vitro drug release testing is an important quality control tool for formulation development. However, the literature has evidence that poly-lactide-co-glycolide (PLGA)-based formulations show a slower in vitro drug release than a real in vivo drug release. Much longer in vitro drug release profiles may not be reflective of real in vivo performances and may significantly affect the timeline for a formulation development. The objective of this study was to develop a surfactant mediated accelerated in vitro drug release method for the PLGA nanoparticles (NPs) of a novel chemotherapeutic agent AC1LPSZG, a model drug with a poor solubility. The Sotax USP apparatus 4 was used to test in vitro drug release in a phosphate buffer with a pH value of 6.8. The sink conditions were improved using surfactants in the order of sodium lauryl sulfate (SLS) < Tween 80 < cetyltrimethylammonium bromide (CTAB). The dissolution efficiency (DE) and area under the dissolution curve (AUC) were increased three-fold when increasing the CTAB concentration in the phosphate buffer (pH 6.8). Similar Weibull release kinetics and good linear correlations (R2~0.99) indicated a good correlation between the real-time in vitro release profile in the phosphate buffer (pH 6.8) and accelerated release profiles in the optimized medium. This newly developed accelerated and discriminatory in vitro test can be used as a quality control tool to identify critical formulation and process parameters to ensure a batch-to-batch uniformity. It may also serve as a surrogate for bioequivalence studies if a predictive in vitro in vivo correlation (IVIVC) is obtained. The results of this study are limited to AC1LPSZG NPs, but a similar consideration can be extended to other PLGA-based NPs of drugs with similar properties and solubility profiles.

Transdermal delivery via medical device technologies

INTRODUCTION

Despite their effectiveness and indispensability, many drugs are poorly solvated in aqueous solutions. Over recent decades, the need for targeted drug delivery has led to the development of pharmaceutical formulations with enhanced lipid solubility to improve their delivery properties. Therefore, a dependable approach for administering lipid-soluble drugs needs to be developed.

AREAS COVERED

The advent of 3D printing or additive manufacturing (AM) has revolutionized the development of medical devices, which can effectively enable the delivery of lipophilic drugs to the targeted tissues. This review focuses on the use of microneedles and iontophoresis for transdermal drug delivery. Microneedle arrays, inkjet printing, and fused deposition modeling have emerged as valuable approaches for delivering several classes of drugs. In addition, iontophoresis has been successfully employed for the effective delivery of macromolecular drugs.

EXPERT OPINION

Microneedle arrays, inkjet printing, and fused deposition are potentially useful for many drug delivery applications; however, the clinical and commercial adoption rates of these technologies are relatively low. Additional efforts is needed to enable the pharmaceutical community to fully realize the benefits of these technologies.

Pharmacology and early ADMET data of corallopyronin A, a natural product with macrofilaricidal anti-wolbachial activity in filarial nematodes

Corallopyronin A (CorA), a natural product antibiotic of Corallococcus coralloides, inhibits the bacterial DNA-dependent RNA polymerase. It is active against the essential Wolbachia endobacteria of filarial nematodes, preventing development, causing sterility and killing adult worms. CorA is being developed to treat the neglected tropical diseases onchocerciasis and lymphatic filariasis caused by Wolbachia-containing filariae. For this, we have completed standard Absorption, Distribution, Metabolism, Excretion and Toxicity (ADMET) studies. In Caco-2 assays, CorA had good adsorption values, predicting good transport from the intestines, but may be subject to active efflux. In fed-state simulated human intestinal fluid (pH 5.0), CorA half-life was &gt;139 minutes, equivalent to the stability in buffer (pH 7.4). CorA plasma-stability was &gt;240 minutes, with plasma protein binding &gt;98% in human, mouse, rat, dog, mini-pig and monkey plasma. Clearance in human and dog liver microsomes was low (35.2 and 42 µl/min/mg, respectively). CorA was mainly metabolized via phase I reactions, i.e., oxidation, and to a minimal extent via phase II reactions. In contrast to rifampicin, CorA does not induce CYP3A4 resulting in a lower drug-drug-interaction potential. Apart from inhibition of CYP2C9, no impact of CorA on enzymes of the CYP450 system was detected. Off-target profiling resulted in three hits (inhibition/activation) for the A3 and PPARγ receptors and COX1 enzyme; thus, potential drug-drug interactions could occur with antidiabetic medications, COX2 inhibitors, angiotensin AT1 receptor antagonists, vitamin K-antagonists, and antidepressants. In vivo pharmacokinetic studies in Mongolian gerbils and rats demonstrated excellent intraperitoneal and oral bioavailability (100%) with fast absorption and high distribution in plasma. No significant hERG inhibition was detected and no phototoxicity was seen. CorA did not induce gene mutations in bacteria (Ames test) nor chromosomal damage in human lymphocytes (micronucleus test). Thus, CorA possesses an acceptable in vitro early ADMET profile; supported by previous in vivo experiments in mice, rats and Mongolian gerbils in which all animals tolerated CorA daily administration for 7-28 days. The non-GLP package will guide selection and planning of regulatory-conform GLP models prior to a first-into-human study.

Advances in in-vitro bioequivalence testing methods for complex ophthalmic generic products

The United States Food and Drug Administration (USFDA) demands that the generic industry prove topical ocular products' pharmaceutical and bioequivalence (BE). In contrast to generic oral drugs, topical ocular product BE testing has proved difficult. New generic versions are compared to an authorized drug product known as a Reference Listed Drug (RLD) to demonstrate their bioequivalence. If the excellent in-vitro results may support the presumption of equivalence in-vivo performance and the only clinically significant difference between the generic and RLD is in its physicochemical qualities and drug release rate, then in-vivo BE studies may be waived. Proving BE through dissolution tests is a golden standard for most conventional dosage forms. However, due to the limited number of biorelevant in-vitro drug release testing (IVRT) approaches capable of differentiating their performance based on product quality and physicochemical properties, the development of generic ophthalmic products has been slow and time-consuming. Often, BE of topical ophthalmic formulations cannot be proved using a single in-vitro test; therefore, an elaborated discussion on various IVRT methods performed to demonstrate bioequivalence of complex generis like ophthalmic emulsions, suspensions, ointments, and gels is necessary. This manuscript aims to review the status of biowaiver criteria for complex ophthalmic products concerning the product-specific FDA guidance to the generic industry.

Polymeric Micelles for Breast Cancer Therapy: Recent Updates, Clinical Translation and Regulatory Considerations

With the growing burden of cancer, parallel advancements in anticancer nanotechnological solutions have been witnessed. Among the different types of cancers, breast cancer accounts for approximately 25% and leads to 15% of deaths. Nanomedicine and its allied fields of material science have revolutionized the science of medicine in the 21st century. Novel treatments have paved the way for improved drug delivery systems that have better efficacy and reduced adverse effects. A variety of nanoformulations using lipids, polymers, inorganic, and peptide-based nanomedicines with various functionalities are being synthesized. Thus, elaborate knowledge of these intelligent nanomedicines for highly promising drug delivery systems is of prime importance. Polymeric micelles (PMs) are generally easy to prepare with good solubilization properties; hence, they appear to be an attractive alternative over the other nanosystems. Although an overall perspective of PM systems has been presented in recent reviews, a brief discussion has been provided on PMs for breast cancer. This review provides a discussion of the state-of-the-art PMs together with the most recent advances in this field. Furthermore, special emphasis is placed on regulatory guidelines, clinical translation potential, and future aspects of the use of PMs in breast cancer treatment. The recent developments in micelle formulations look promising, with regulatory guidelines that are now more clearly defined; hence, we anticipate early clinical translation in the near future.

Overcoming the Drawbacks of Sulpiride by Means of New Crystal Forms

This study aims at developing new multicomponent crystal forms of sulpiride, an antipsychotic drug. The main goal was to improve its solubility since it belongs to class IV of the BCS. Nine new adducts were obtained by combining the active pharmaceutical ingredient with acid coformers: a salt cocrystal and eight molecular salts. In addition, three novel co-drugs, of which two are molecular salts and one is a cocrystal, were also achieved. All samples were characterized in the solid state by complementary techniques (i.e., infrared spectroscopy, powder X-ray diffraction and solid-state NMR). For systems for which it was possible to obtain good-quality single crystals, the structure was solved by single crystal X-ray diffraction (SCXRD). SCXRD combined with solid-state NMR were used to evaluate the ionic or neutral character of the adducts. In vitro dissolution tests of the new crystal forms were performed and all the adducts display remarkable dissolution properties with respect to pure sulpiride.

Discovery of Substituted Di(pyridin-2-yl)-1,2,4-thiadiazol-5-amines as Novel Macrofilaricidal Compounds for the Treatment of Human Filarial Infections

Filarial diseases, including lymphatic filariasis and onchocerciasis, are considered among the most devastating of all tropical diseases, affecting about 145 million people worldwide. Efforts to control and eliminate onchocerciasis are impeded by a lack of effective treatments that target the adult filarial stage. Herein, we describe the discovery of a series of substituted di(pyridin-2-yl)-1,2,4-thiadiazol-5-amines as novel macrofilaricides for the treatment of human filarial infections.

Dissolution of a Biopharmaceutics Classification System Class II Free Acid from Immediate Release Tablets Containing a Microenvironmental pH Modulator: Comparison of a Biorelevant Bicarbonate Buffering System with Phosphate Buffers

Poor water dissolution of active pharmaceutical ingredients (API) limits the rate of absorption from the gastrointestinal tract. Increasing the pH of a solid form microenvironment can enhance the dissolution of weakly acidic drugs, but data on this phenomenon in a physiologically relevant bicarbonate media are lacking. In this paper, we examined the effect of a microenvironmental pH modulator (Na₂HPO₄) on the dissolution of a Biopharmaceutics Classification System (BCS) class II free weak acid (ibuprofen) at biorelevant conditions, including an automatic bicarbonate buffering system, as well as in compendial (50 mM) and low-concentration (10 mM) phosphate buffers with no external pH control. The tablets of 200 mg ibuprofen with either Na₂HPO₄ (phosphate formulation, PF) or NaCl (reference formulation, RF) were manufactured using a compression method. In a pH 2 simulated gastric fluid, only PF produced a transient supersaturation of ibuprofen, dissolving a fourfold higher drug amount than RF. In a bicarbonate-buffered simulated intestinal fluid with a dynamically controlled pH (5.7, 7.2, and 5.8 to 7.7 gradient), PF dissolved more drug within 30 min than RF (p ≤ 0.019). Of note, the use of a 50 mM phosphate buffer pH 7.2 provided opposite results-RF dissolved the API much faster than PF. Moreover, 10 mM phosphate buffers of pH 5.6 and 7.2 could neither maintain a constant pH nor mimic the bicarbonate buffer performance. In conclusion, the use of a bicarbonate-buffered intestinal fluid, instead of phosphate buffers, may be essential in dissolution tests of BCS class II drugs combined with pH modulators.

Modeling of In Vitro Dissolution Profiles of Carvedilol Immediate-Release Tablets in Different Dissolution Media

Quantitative evaluation of drug dissolution characteristics based on mathematical models is essential to understand and predict a particular drug release profile. In this study, model-dependent evaluation of the dissolution kinetics of reference and five test products (25-mg, immediate-release (IR) tablets) of an antihypertensive drug, carvedilol, was carried out using the DDSolver^® program. The effects of pH (pH 1.2, 4.5, and 6.8) and various media with/without 0.5% (w/v) anionic, cationic, and nonionic surfactants (sodium lauryl sulfate (SLS), hexadecyltrimethylammonium bromide (CTAB), and polysorbate 80) on the dissolution kinetics of the bioequivalent IR products of carvedilol were investigated. The Weibull-1 model was fitted successfully to the dissolution data of all products at pH 1.2 and pH 4.5, as well as in the pH 6.8 medium with CTAB according to the model goodness of fit (r² = 0.981-0.999, AIC = 14.5-42.6, MSC = 1.99-5.25). Model fitting produced good fits to Gompertz-1 for all products at pH 6.8 without a surfactant (r² = 0.975-0.998, AIC = 28.3-55, MSC = 2.53-5.82). For pH 6.8 media containing SLS or polysorbate 80, Logistic-2 was fitted successfully to the dissolution data of all products (r² = 0.974-0.999, AIC = 20.9-52.1, MSC = 1.90-5.69). Overall, the model-dependent analysis of in vitro dissolution data indicated in vitro equivalence of the reference and test products of carvedilol in each medium in terms of kinetic models, suggesting that it would have an important role in developing generic drug products of the BCS class II drug carvedilol.

Chemical and Pharmacological Properties of Decoquinate: A Review of Its Pharmaceutical Potential and Future Perspectives

Decoquinate (DQ) is an antimicrobial agent commonly used as a feed additive for birds for human consumption. Its use as an additive is well established, but DQ has the potential for therapy as an antimicrobial drug for veterinary treatment and its optimized derivatives and/or formulations, mainly nanoformulations, have antimicrobial activity against pathogens that infect humans. However, DQ has a high partition coefficient and low solubility in aqueous fluids, and these biopharmaceutical properties have limited its use in humans. In this review, we highlight the antimicrobial activity and pharmacokinetic properties of DQ and highlight the solutions currently under investigation to overcome these drawbacks. A literature search was conducted focusing on the use of decoquinate against various infectious diseases in humans and animals. The search was conducted in several databases, including scientific and patent databases. Pharmaceutical nanotechnology and medicinal chemistry are the tools of choice to achieve human applications, and most of these applications have been able to improve the biopharmaceutical properties and pharmacokinetic profile of DQ. Based on the results presented here, DQ prototypes could be tested in clinical trials for human application in the coming years.

Dissolution of irregularly-shaped drug particles: mathematical modelling

The prediction of drug dissolution profiles is crucial for elucidating the pharmacokinetic behaviour of drugs and the bioavailability of dosage forms. In this work, we develop a mathematical model to describe the dissolution process of irregularly shaped particles. We use a complete dissolution model that accounts for both surface kinetics and convective diffusion. The mechanistic relationship between the mass transfer coefficient and the local curvature is derived from the fundamental physical laws governing these processes. Our model theoretically shows that the dissolution rate depends nonlinearly on the surface curvature. The subsequent recrystallization process in the bulk fluid is also considered. The main result of this work is its simplicity, since only two coupled nonlinear ordinary differential equations are needed to describe the dissolution process. Another remarkable advantage is the possibility to determine the model parameters using common independent techniques, so that the importance of the wettability of solids on the dissolution process can be evaluated. Finally, the proposed model demonstrated the importance of particle shape in describing the experimental dissolution data of theophylline monohydrate.

SLC4A4, FRAS1, and SULT1A1 Genetic Variations Associated With Dabigatran Metabolism in a Healthy Chinese Population

Background: The purpose of this study was to identify genetic variations associated with the metabolism of dabigatran in healthy Chinese subjects, with particular focus given to pharmacokinetics (PK) and pharmacodynamics (PD).

Methods: Healthy Chinese adults aged 18–65 years with unknown genotypes from a bioequivalence trial were included according to the protocol registered at ClinicalTrial.org (NCT03161496). All subjects received a single dose (150 mg) of dabigatran etexilate. PK (main outcomes: area under the concentration-time, AUC0-t, of total and free dabigatran) and PD (main outcomes: anti-FIIa activity, APTT, and PT) parameters were evaluated. Whole-exome sequencing and genome-wide association analyses were performed. Additionally, candidate gene association analyses related to dabigatran were conducted.

Results: A total of 118 healthy Chinese subjects were enrolled in this study. According to the p-value suggestive threshold (1.0 × 10−4), the following three SNPs were found to be associated with the AUC0–t of total dabigatran: SLC4A4 SNP rs138389345 (p = 5.99 × 10−5), FRAS1 SNP rs6835769 (p = 6.88 × 10−5), and SULT1A1 SNP rs9282862 (p = 7.44 × 10−5). Furthermore, these SNPs were also found to have significant influences on the AUC0–t of free dabigatran, maximum plasma concentration, and anti-FIIa activity (p &lt; 0.05). Moreover, we identified 30 new potential SNPs of 13 reported candidate genes (ABCB1, ABCC2, ABCG2, CYP2B6, CYP1A2, CYP2C19, CYP3A5, CES1, SLCO1B1, SLC22A1, UGT1A1, UGT1A9, and UGT2B7) that were associated with drug metabolism.

Conclusion: Genetic variations were indeed found to impact dabigatran metabolism in a population of healthy Chinese subjects. Further research is needed to explore the more detailed functions of these SNPs. Additionally, our results should be verified in studies that use larger sample sizes and investigate other ethnicities.

Selective terpene based therapeutic deep eutectic systems against colorectal cancer

Cancer remains a major health problem worldwide, with colorectal cancer (CRC) being the third most incident and the second most lethal. Inflammation, on the other hand, has been highly associated with cancer development and maintenance, therefore, the reduction of the inflammatory microenvironment represents a promising therapeutic strategy. Deep eutectic systems (DES) are based on the combination of different components which together, at a certain molar ratio, present a deep decrease in their melting point compared with the individual compounds. When an active pharmaceutical ingredient is part of a DES it is designated by therapeutic deep eutectic system (THEDES). New THEDES combining terpenes with anticancer properties, such as safranal, menthol and linalool, with nonsteroidal anti-inflammatory drugs (NSAIDs), like ibuprofen, ketoprofen and flurbiprofen were produced. To evaluate THEDES anti-CRC therapeutic potential, their physico-chemical properties, bioavailability and bioactivity, were explored. Our results show that safranal:ibuprofen (3:1), safranal:ibuprofen (4:1) and menthol:ibuprofen (3:1) present promising therapeutic activity towards CRC cells due to a selective cytotoxic action towards cancer cells. menthol:ibuprofen (3:1) anti-proliferative action seems to be related with cell membrane disruption, reduction of the inflammation through the reduction of reactive oxygen species (ROS) production, and induction of apoptosis via caspase-3. On the other hand, safranal:ibuprofen (3:1) and safafranal:ibuprofen (4:1) seem to prevent tumour expansion only through the induction of apoptosis via caspase-3. Besides, these systems present an increase in ibuprofen permeability, with menthol:ibuprofen (3:1) increasing also ibuprofen's solubility thus its overall bioavailability. Knowing that cancer is a huge problematic situation that requires alternative therapies with less side effects, improved efficacy, associated with less costs and environmentally friendly, a new opportunity emerges for DES to be part of the pharmaceutical industry.