The advantage of hollow mesoporous carbon as a near-infrared absorbing drug carrier in chemo-photothermal therapy compared with IR-820

Adjustable Fluorescence Emission of J-Aggregated Tricarbocyanine in the Near-Infrared-II Region

Near-infrared (NIR) J-aggregates attract increasing attention in many areas, especially in biomedical applications, as they combine the advantages of NIR spectroscopy with the unique J-aggregation properties of organic dyes. They enhance light absorption and have been used as effective biological imaging and therapeutic agents to achieve high-resolution imaging or effective phototherapy in vivo. In this work, we present novel J-aggregates composed of the well-known cyanine molecules. Cyanines are one of the few types of molecules whose absorption and emission can be shifted over a broad spectral range, from the ultraviolet (UV) to the NIR regime. They can easily transform into J-aggregates with narrow absorption and emission peaks, which is accompanied by a red shift in their spectra. In this work, we show, for the first time, that the tricarbocyanine dye (IR 820) has two sharp fluorescence emission bands in the NIR-II region with high photostability. These emission bands can be tuned to a desired wavelength in the range of 1150-1560 and 1675 nm, with a linear dependence on the excitation wavelength. Cryogenic transmission electron microscopy (cryo-TEM) images are presented, and combined with molecular modeling analysis, they confirm IR 820 π-stacked self-assembled fibrous structures.

Thermal-/pH-triggered hollow mesoporous carbon nanocarrier for NIR-responsive drug release

Intelligent drug-delivery systems are considered one of the most important techniques for improving cancer treatment using existing over-the-counter medicines. However, metallic materials are always accompanied by metabolism problems, whereas chemotherapy produces several side effects in humans. Carbon-based materials exhibit exceptional features such as bio-affinity and bio-degradability. Herein, hollow mesoporous carbon nanoparticles (HMCs) are reported as effective nanocarriers of anti-cancer small drug molecules. Near IR (NIR) sources, which can penetrate most organs, induce thermal effects via non-invasive pathways. NIR radiation not only provides thermal therapy but also is compatible with temperature-sensitive coated responsive polymer shells. The template method was used to synthesize HMCs with size 200 ± 50 nm, under various conditions, to obtain suitably sized and hollow structures for liver-cancer treatment. Additional pH/thermal-bi-responsive poly(N-isopropylacrylamide) (PNIPAM) shells were further coated onto the HMCs to produce multiple shells that could trigger swelling motions in PNIPAM@HMCs, as confirmed via small-angle X-ray scattering (SAXS). NIR results demonstrated an extreme increase to the ∆T of 8.7 and 14.2 °C for HMC and PNIPAM@HMCs, respectively. The SAXS spectra analyzed using SasView simulations demonstrated the multi-shell structures of synthesized HMCs and the release mechanism of PNIPAM@HMCs. Based on the model simulation of SAXS, the different rates of polymer swelling indicated the core shrinkage (229.7 to 134.2 Å) and shell expansion (324.3 to 514.3 Å) at 37 °C and 42 °C, respectively. In addition, the first-order, Higuchi, Korsmeyer-Peppas, and Weibull mathematical models were used to verify the drug-release kinetics, and the model with the highest R² value was considered most suitable for further application. This paper presents the first SAXS study on PNIPAM@HMCs release kinetics and related mechanisms. This phenomenon indicates NIR-induced PNIPAM@HMCs as an effective strategy for cancer treatment via doxorubicin release.

Chemo-Photothermal Combination Therapy of HER-2 Overexpressing Breast Cancer Cells with Dual-Ordered Mesoporous Carbon@Silica Nanocomposite

In cancer treatment, the complexity of tumors seriously affects the therapeutic potential of the treatment. Treatments with combination therapy result in more potent effects than monotherapy or their theoretical combination in cancer treatment. Photothermal therapy (PTT) includes applying phototherapeutic agents that cause local hyperthermia responsible for the thermal ablation of tumor cells after applying near-infrared light and is often applied with other combination therapies. In this study, the chemo-PTT potential of synthesized drug-loaded and targeted GEM/TRA-MC@Si nanocomposite on Her2 positive breast cancer cell line (SK-BR-3) and human triple-negative breast cancer cell line (MDA-MB-231) was investigated using NIR application as in vitro. First, the cell viability (IC₅₀) value of the GEM/TRA-MC@Si nanocomposite was determined as 25 µg/µL. Then, chemo-PTT was performed, and the viability of the cells was evaluated. In addition, the live/dead cell rate was established by staining with the Calcein-AM and EthD-1, and apoptosis tests were completed. When the surface temperature of Her2 positive SK-BR-3 cells exceeded 47 °C during PTT with an irradiation time of > 100 s, it caused cell death. In this study, it was demonstrated that in vitro PTT (1 W/cm², 180 s) was applied using GEM/TRA-MC@Si nanocomposite (25 µg/mL) on her2 + SK-BR-3 cell line, which contributed to the reduction of cell viability. In addition, this study demonstrates that chemo-PTT with targeted GEM/TRA-MC@Si nanocomposite induced SK-BR-3 cell viability and can initiate cell death through the apoptosis pathway under optimized irradiation conditions. Herewith chemo-PTT combination therapy of targeted GEM-TRA/MC@Si nanocomposite was found to be effective on SK-BR-3 cells as in vitro.

Constructing a drug release model by central composite design to investigate the interaction between drugs and temperature-sensitive controlled release nanoparticles

To study the release behavior of a thermosensitive controlled release drug delivery system and construct a predictable mathematical model of drug release, poly(N-isopropylacrylamide-co-Allylamine) (P(NIPA-AL17)) and ploy(styrene sulfonate) (PSS) were functionalized on the surface of hollow mesoporous carbon nanoparticles (HMCNs) through layer-by-layer (LBL) assembly to construct a photothermal responsive controlled release system. A five-level four-factorial central composite design (CCD) was performed to investigate the relationship between four independent variables including drug loading (A), number of polymer layers (B), temperature (C) and vibration rate of the shaker (D), and three dependent response variables, including cumulative release over 1 h (Y₁), cumulative release over 24 h (Y₂) and the release rate constant k (Y₃). The CCD results indicate that A and C significantly affect Y₁ (P < 0.05). C significantly affects Y₂ (P < 0.05). A and B is found to affect Y₃ (P < 0.05) significantly. When C is below 39 °C, Y₁ and Y₂ decrease with the increase of A and B, and when C is above 39 °C, they increase with the increase of A and B; Y₃ decreases as A and B increase; and D shows the least or even no influence on Y₁, Y₂ and Y₃. The constructed predictable mathematical model will provide a scientific reference for the further development and application of photothermal responsive controlled-release preparations.

H2O2 generation enhancement by ultrasonic nebulisation with a zinc layer for spray disinfection

With the outbreak of COVID-19, microbial pollution has gained increasing attention as a threat to human health. Consequently, many research efforts are being devoted to the development of efficient disinfection methods. In this context, hydrogen peroxide (H₂O₂) stands out as a green and broad-spectrum disinfectant, which can be produced and sprayed in the air directly by cavitation in ultrasonic nebulisation. However, the yield of H₂O₂ obtained by ultrasonic nebulisation is too low to satisfy the requirements for disinfection by spraying and needs to be improved to achieve efficient disinfection of the air and objects. Herein, we report the introduction of a zinc layer into an ultrasonic nebuliser to improve the production of H₂O₂ and generate additional Zn²⁺ by self-corrosion, achieving good disinfecting performance. Specifically, a zinc layer was assembled on the oscillator plate of a commercial ultrasonic nebuliser, resulting in a 21-fold increase in the yield of H₂O₂ and the production of 4.75 μg/mL Zn²⁺ in the spraying droplets. When the generated water mist was used to treat a bottle polluted with Escherichia coli for 30 min, the sterilisation rate reached 93.53%. This ultrasonic nebulisation using a functional zinc layer successfully enhanced the production of H₂O₂ while generating Zn²⁺, providing a platform for the development of new methodologies of spray disinfection.

In Vitro Evaluation of DSPE-PEG (5000) Amine SWCNT Toxicity and Efficacy as a Novel Nanovector Candidate in Photothermal Therapy by Response Surface Methodology (RSM)

Nowadays, finding a novel, effective, biocompatible, and minimally invasive cancer treatment is of great importance. One of the most promising research fields is the development of biocompatible photothermal nanocarriers. PTT (photothermal therapy) with an NIR (near-infrared) wavelength range (700–2000 nm) would cause cell death by increasing intercellular and intracellular temperature. PTT could also be helpful to overcome drug resistance during cancer treatments. In this study, an amine derivative of phospholipid poly ethylene glycol (DSPE-PEG (5000) amine) was conjugated with SWCNTs (single-walled carbon nanotubes) to reduce their intrinsic toxicity. Toxicity studies were performed on lung, liver, and ovarian cancer cell lines that were reported to show some degree of drug resistance to cisplatin. Toxicity results suggested that DSPE-PEG (5000) amine SWCNTs might be biocompatible photothermal nanocarriers in PTT. Therefore, our next step was to investigate the effect of DSPE-PEG (5000) amine SWCNT concentration, cell treatment time, and laser fluence on the apoptosis/necrosis of SKOV3 cells post-NIR exposure by RSM and experimental design software. It was concluded that photothermal efficacy and total apoptosis would be dose-dependent in terms of DSPE-PEG (5000) amine SWCNT concentration and fluence. Optimal solutions which showed the highest apoptosis and lowest necrosis were then achieved.

Hybrid Hydrogels for Synergistic Periodontal Antibacterial Treatment with Sustained Drug Release and NIR-Responsive Photothermal Effect

BACKGROUND

Periodontal pathogenic bacteria promote the destruction of periodontal tissues and cause loosening and loss of teeth in adults. However, complete removal of periodontal pathogenic bacteria, at both the bottom of the periodontal pocket and the root bifurcation area, remains challenging. In this work, we explored a synergistic antibiotic and photothermal treatment, which is considered an alternative strategy for highly efficient periodontal antibacterial therapy.

METHODS

Mesoporous silica (MSNs) on the surface of Au nanobipyramids (Au NBPs) were designed to achieve the sustained release of the drug and photothermal antibacterials. The mesoporous silica-coated Au NBPs (Au NBPs@SiO2) were mixed with gelatin methacrylate (GelMA-Au NBPs@SiO2). Au NBPs@SiO2 and GelMA-Au NBPs@SiO2 hybrid hydrogels were characterized, and the drug content and photothermal properties in terms of the release profile, bacterial inhibition, and cell growth were investigated.

RESULTS

The GelMA-Au NBPs@SiO2 hybrid hydrogels showed controllable minocycline delivery, and the drug release rates increased under 808 nm near-infrared (NIR) light irradiation. The hydrogels also exhibited excellent antibacterial properties, and the antibacterial efficacy of the antibiotic and photothermal treatment was as high as 90% and 66.7% against Porphyromonas gingivalis (P. gingivalis), respectively. Moreover, regardless of NIR irradiation, cell viability was over 80% and the concentration of Au NBPs@SiO2 in the hybrid hydrogels was as high as 100 µg/mL.

CONCLUSION

We designed a new near-infrared light (NIR)-activated hybrid hydrogel that offers both sustained release of antibacterial drugs and photothermal treatment. Such sustained release pattern yields the potential to rapidly eliminate periodontal pathogens in the periodontal pocket, and the photothermal treatment maintains low bacterial retention after the drug treatment.

Gold nanoparticles modified hollow carbon system for dual-responsive release and chemo-photothermal synergistic therapy of tumor

Thermochemotherapy has shown a synergistic anti-cancer efficiency and can enhance the therapeutic effect of simple chemotherapy. The photothermal conversion characteristics of carriers are vital in thermo-chemotherapy. Therefore, hollow mesoporous carbon (HMC) with excellent heating efficiency and a large specific surface area was used to ensure the high loading capacity. Next, approximately 4 nm spherical gold nanoparticles (NPs) were employed as gatekeepers of the tunnels of HMC by Au-S bonds, which have the same size as HMC mesopores. Additionally, the gold NPs could avoid the premature release of the drug and enhance the photothermal properties of the delivery system. The surface of the carriers was modified with polyethylene glycol (PEG) to increase the biocompatibility and dispersity of doxorubicin (DOX) loaded DOX/HMC-Au@PEG. DOX release was markedly accelerated in the presence of glutathione (GSH) and near-infrared (NIR), indicating that the system had redox and NIR dual-triggered drug release characteristics. Cytotoxicity experiments proved that combined therapy induced the highest cell killing level. Additionally, the combination index (CI) of DOX/HMC-Au@PEG was 0.452, indicating the synergistic effect of chemotherapy and photo-thermal therapy (PTT). In vivo antitumor experiments were also carried out and showed the same trend. In general, the results of this study indicated that DOX/HMC-Au@PEG has great potential in dual-triggered drug delivery and thermochemotherapy.

Graphene quantum dots-gated hollow mesoporous carbon nanoplatform for targeting drug delivery and synergistic chemo-photothermal therapy

BACKGROUND

Carbon-based drug delivery systems have attracted great interest because of their excellent photothermal conversion capability and high specific surface area for drug loading. Herein, we report a multifunctional nanoplatform based on hyaluronic acid (HA)-modified and graphene quantum dot (GQD)-gated hollow mesoporous carbon nanoparticle (HMCN) for anticancer drug encapsulation and targeted chemo-photothermal therapy of CD44 receptor-overexpressed cancer cells.

METHODS

In this design, HMCN was not only used as a nanocarrier with high drug loading content to achieve chemotherapy, but also as a near-infrared absorbing agent to realize photothermal therapy. GQDs could not only prevent premature drug release during blood circulation, but also enhance the chemo-photothermal therapeutic efficacy for complete tumor growth suppression. After being modified with HA, the HA-HMCN(DOX)@GQDs could specifically target cancer cells.

RESULTS

As expected, the as-prepared HMCN exhibited high doxorubicin (DOX)-loading capacity of 410 mg/g and excellent light-to-heat conversion property. The DOX was released from HA-HMCN(DOX)@GQDs in a near-infrared laser and pH stimuli-responsive manner, which could enhance the therapeutic effect. In vitro cell biological experimental results confirmed that the nanoplatform possesses excellent biocompatibility, specifically target CD44 receptor-overexpressing human cervical carcinoma HeLa cells, and has remarkable synergistic chemo-photothermal killing capacity. The in vivo therapeutic studies in HeLa xenografts also showed negligible toxicity of HA-HMCN@GQDs and complete inhibition of tumor growth of HA-HMCN(DOX) @GQDs with near-infrared irradiation.

CONCLUSION

The excellent therapeutic effects demonstrated in vitro and in vivo suggested the HMCN-based nanoplatform holds potential for efficient dual-responsive targeting drug delivery and synergistic chemo-photothermal therapy.

Preparation of Poly(lactic-co-glycolic acid)-Based Composite Microfibers for Postoperative Treatment of Tumor in NIR I and NIR II Biowindows

In this work, a novel kind of electrospun microfiber to deliver a photothermal agent and an anticancer drug to tumor sites is explored. Photothermal therapy agent (MoS2 nanosheets) and doxorubicin (DOX) are incorporated with poly(lactic-co-glycolic acid) (PLGA) microfiber via electrospinning a solution of PLGA, MoS2 , and DOX. The designed microfiber with uniform fibrous morphology and negligible in vitro/in vivo hemo-/histo-toxicity is used as a durable photothermal agent, which shows an excellent photothermal transform ability and acceptable photothermal stability in both the first and second near-infrared light (NIR I and II) biowindows. The synergistic in vivo tumor chemotherapy and photothermal therapy efficiency of the composite microfibers are studied in postoperative treatment of cancer. It is found that the tumor postoperative reoccurrence can be completely prohibited owing to the synergistic tumor therapy efficiency in both the NIR I and NIR II biowindows.

Loading IR820 Using Multifunctional Dendrimers with Enhanced Stability and Specificity

Cyanine dyes are promising candidates in biomedical applications. Although various delivery systems have been developed to enhance their properties, their dendrimer-based delivery systems are seldom investigated. Herein, amine-terminated generation 5 poly(amidoamine) (G5.NH₂) dendrimers and new indocyanine green (IR820) dyes were chosen as models to study the loading ability of dendrimers for cyanine dynes. G5.NH₂ dendrimers were pre-modified with arginine-glycine-aspartic (RGD) peptides, poly(ethylene glycol) chains, and acetyl groups to be endowed with cancer cell specificity and biocompatibility. The formed Ac-PR dendrimers were used to load IR820, followed by thorough characterization. The loaded number of IR820 was estimated to be 6.7 per dendrimer. The stability of IR820 was improved through dendrimer loading, which was proved by their UV-vis spectra under different kinds of storage conditions. In addition, the formed Ac-PR dendrimers can retain the loaded IR820 effectively. Their cytocompatibility was desirable under the studied conditions. Their cellular uptake behaviors were demonstrated to be enhanced by RGD modification, showing concentration-, co-incubation time-, and αvβ₃ integrin receptor-dependent properties, displaying a cytoplasm-location. The findings from this work demonstrated the versatile loading and delivery capacity of dendrimers for near-infrared (NIR) dyes, providing fundamental data for the development of dendrimer/NIR dye systems for biomedical applications, especially for cancer theranostic applications.

Nanocarrier-Mediated Photochemotherapy and Photoradiotherapy

Photothermal therapy (PTT) and photodynamic therapy (PDT) both utilize light to induce a therapeutic effect. These therapies are rapidly gaining importance due to the noninvasiveness of light and the limited adverse effect associated with these treatments. However, most preclinical studies show that complete elimination of tumors is rarely observed. Combining PDT and PTT with chemotherapy or radiotherapy can improve the therapeutic outcome and simultaneously decrease side effects of these conventional treatments. Nanocarriers can help to facilitate such a combined treatment. Here, the most recent advancements in the field of photochemotherapy and photoradiotherapy, in which nanocarriers are employed, are reviewed.

Inorganic Nanocrystals Functionalized Mesoporous Silica Nanoparticles: Fabrication and Enhanced Bio-applications

Mesoporous SiO2 nanoparticles (MSNs) are one of the most promising materials for bio-related applications due to advantages such as good biocompatibility, tunable mesopores, and large pore volume. However, unlike the inorganic nanocrystals with abundant physical properties, MSNs alone lack functional features. Thus, they are not sufficiently suitable for bio-applications that require special functions. Consequently, MSNs are often functionalized by incorporating inorganic nanocrystals, which provide a wide range of intriguing properties. This review focuses on inorganic nanocrystals functionalized MSNs, both their fabrication and bio-applications. Some of the most utilized methods for coating mesoporous silica (mSiO2) on nanoparticles were summarized. Magnetic, fluorescence and photothermal inorganic nanocrystals functionalized MSNs were taken as examples to demonstrate the bio-applications. Furthermore, asymmetry of MSNs and their effects on functions were also highlighted.

Fluorescent carbon dot gated hollow mesoporous carbon for chemo-photothermal synergistic therapy

An efficient and intelligent nano-carrier that combines cell imaging with near infrared (NIR) light and redox dual-responsive drug delivery was successfully prepared. The hollow mesoporous carbon (HMC) nanoparticles with high photothermal conversion ability were developed to increase the drug loading efficiency and realize chemotherapy and photothermal synergetic therapy. The photo-stable and luminescent carbon dots (CDs) were prepared from branched polyethyleneimine (PEI) by hydrothermal reaction. The PEI CDs (CD_PEI) were grafted on the openings of HMC as the "gatekeepers" via disulfide units (HMC-SS-CD_PEI) to prevent the premature release of doxorubicin (DOX). In the presence of GSH, the CD_PEI separated from HMC due to the breakage of disulfide bonds, thus triggering the rapid release of the encapsulated drug. In addition, the release rate of DOX could be further accelerated by NIR light irradiation due to the increased temperature which would decrease the interaction between HMC and DOX. The fluorescence of the CD_PEI is quenched when being attached to the HMC, while it is recovered when the CD_PEI breaking away from HMC. Hence, the fluorescent CD_PEI not only act as a gatekeeper to control drug release but also play a vital role in monitoring the process of the drug delivery. The developed HMC-SS-CD_PEI showed dual-responsive drug release property and could be used as visible nano-platforms for chemo-photothermal synergistic therapy.

Mesoporous carbon nanomaterials in drug delivery and biomedical application

Recent development of nano-technology provides highly efficient and versatile treatment methods to achieve better therapeutic efficacy and lower side effects of malignant cancer. The exploration of drug delivery systems (DDSs) based on nano-material shows great promise in translating nano-technology to clinical use to benefit patients. As an emerging inorganic nanomaterial, mesoporous carbon nanomaterials (MCNs) possess both the mesoporous structure and the carbonaceous composition, endowing them with superior nature compared with mesoporous silica nanomaterials and other carbon-based materials, such as carbon nanotube, graphene and fullerene. In this review, we highlighted the cutting-edge progress of carbon nanomaterials as drug delivery systems (DDSs), including immediate/sustained drug delivery systems and controlled/targeted drug delivery systems. In addition, several representative biomedical applications of mesoporous carbon such as (1) photo-chemo synergistic therapy; (2) delivery of therapeutic biomolecule and (3) in vivo bioimaging are discussed and integrated. Finally, potential challenges and outlook for future development of mesoporous carbon in biomedical fields have been discussed in detail.