Development and optimization of a novel PLGA-Levan based drug delivery system for curcumin, using a quality-by-design approach

Expanding the horizons of levan: from microbial biosynthesis to applications and advanced detection methods

Levan, a β-(2,6)-linked fructose polymer, exhibits diverse properties that impart versatility, rendering it a highly sought-after biopolymer with various industrial applications. Levan can be produced by various microorganisms using sucrose, food industry byproducts and agricultural wastes. Microbial levan represents the most potent cost-effective process for commercial-scale levan production. This study reviews the optimization of levan production by understanding its biosynthesis, physicochemical properties and the fermentation process. In addition, genetic and protein engineering for its increased production and emerging methods for its detection are introduced and discussed. All of these comprehensive studies could serve as powerful tools to optimize levan production and broaden its applications across various industries.

Preparation of copolymer 7-hydroxyethyl chrysin loaded PLGA nanoparticles and the in vitro release

OBJECTIVES

To prepare 7-hydroxyethyl chrysin (7-HEC) loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticles and to detect the in vitro release.

METHODS

The 7-HEC/PLGA nanoparticles were prepared by emulsification solvent volatilization method. The particle size, polydispersity index (PDI), encapsulation rate, drug loading and zeta potential were measured. The prescription was optimized by single factor investigation combined with Box-Behnken response surface method. Mannitol was used as protectant to prepare lyophilized powder, and the optimal formulation was characterized and studied for the in vitro release.

RESULTS

The optimal formulation of 7-HEC/PLGA nanoparticles was as follows: drug loading ratio of 2.12∶20, oil-water volume ratio of 1∶14.7, and 2.72% soybean phospholipid as emulsifier. With the optimal formulation, the average particle size of 7-HEC/PLGA nanoparticles was (240.28±0.96) nm, the PDI was 0.25±0.69, the encapsulation rate was (75.74±0.80)%, the drug loading capacity was (6.98±0.83)%, and the potentiostatic potential was (－18.17±0.17) mV. The cumulative in vitro release reached more than 50% within 48 h.

CONCLUSIONS

The optimized formulation is stable and easy to operate. The prepared 7-HEC/PLGA nanoparticles have uniform particle size, high encapsulation rate and significantly higher dissolution rate than 7-HEC.

Optimization of PLGA-DSPE hybrid nano-micelles with enhanced hydrophobic capacity for curcumin delivery

Poly (D, L Lactic-co-Glycolic acid) (PLGA) is an FDA-approved polymer. It is distinguished from other biocompatible polymers by its feasibility of production and safety for intravenous cancer tumor targeting. Curcumin (CUR) is a natural molecule with versatile bioactivities including inhibiting the nuclear Factor kappa B (Nf-kB) levels in cancer cells, increased by chemotherapy agents. Our group previously reported a successful decrease in the p65 (RelA) subunit of Nf-kB using 125 µg/ml CUR loaded into PLGA nano-micelles. However, this amount was insufficient to reduce all Nf-kB subunits. This study aimed to increase the hydrophobic capacity of PLGA toward CUR using 1,2-Distearoyl-sn-glycerol-3-phosphoethanolamine (DSPE), an FDA-approved phospholipid. PLGA-DSPE hybrid nano-micelles (HNM) were prepared using two different methods, oil-in-water (OiWa) and film preparation-rehydration (FiRe). The encapsulated CUR was successfully increased to 250 µg/ml using the FiRe method. Physicochemical characterization of CUR-loaded HNM was performed using DLS FT-IR, DSC, and HPLC. In HNM with a size of 156.6 nm, DSPE, incorporated with all functional groups of PLGA, and CUR was trapped in the core of this structure. The release profile of CUR was suitable for targeted cancer therapy and the Encapsulation Efficacy was 92%.

Recent Developments and Applications of Microbial Levan, A Versatile Polysaccharide-Based Biopolymer

Polysaccharides are essential components with diverse functions in living organisms and find widespread applications in various industries. They serve as food additives, stabilizers, thickeners, and fat substitutes in the food industry, while also contributing to dietary fiber for improved digestion and gut health. Plant-based polysaccharides are utilized in paper, textiles, wound dressings, biodegradable packaging, and tissue regeneration. Polysaccharides play a crucial role in medicine, pharmacy, and cosmetology, as well as in the production of biofuels and biomaterials. Among microbial biopolymers, microbial levan, a fructose polysaccharide, holds significant promise due to its high productivity and chemical diversity. Levan exhibits a wide range of properties, including film-forming ability, biodegradability, non-toxicity, self-aggregation, encapsulation, controlled release capacity, water retention, immunomodulatory and prebiotic activity, antimicrobial and anticancer activity, as well as high biocompatibility. These exceptional properties position levan as an attractive candidate for nature-based materials in food production, modern cosmetology, medicine, and pharmacy. Advancing the understanding of microbial polymers and reducing production costs is crucial to the future development of these fields. By further exploring the potential of microbial biopolymers, particularly levan, we can unlock new opportunities for sustainable materials and innovative applications that benefit various industries and contribute to advancements in healthcare, environmental conservation, and biotechnology.

Exploring the potential of Halomonas levan and its derivatives as active ingredients in cosmeceutical and skin regenerating formulations

Demand on natural products that contain biological ingredients mimicking growth factors and cytokines made natural polysaccharides popular in pharmaceutical and cosmetic industries. Levan is the β-(2-6) linked, nontoxic, biocompatible, water-soluble, film former fructan polymer that has diverse applications in pharmacy and cosmeceutical industries with its moisturizing, whitening, anti-irritant, anti-aging and slimming activities. Driven by the limited reports on few structurally similar levan polymers, this study presents the first systematic investigation on the effects of structurally different extremophilic Halomonas levan polysaccharides on human skin epidermis cells. In-vitro experiments with microbially produced linear Halomonas levan (HL), its hydrolyzed, (hHL) and sulfonated (ShHL) derivatives as well as enzymatically produced branched levan (EL) revealed increased keratinocyte and fibroblast proliferation (113-118 %), improved skin barrier function through induced expressions of involucrin (2.0 and 6.43 fold changes for HL and EL) and filaggrin (1.74 and 3.89 fold changes for hHL and ShHL) genes and increased type I collagen (2.63 for ShHL) and hyaluronan synthase 3 (1.41 for HL) gene expressions together with fast wound healing ability within 24 h (100 %, HL) on 2D wound models clearly showed that HL and its derivatives have high potential to be used as natural active ingredients in cosmeceutical and skin regenerating formulations.

Coating with cationic inulin enhances the drug release profile and in vitro anticancer activity of lecithin-based nano drug delivery systems

Core-shell structured lipidic nanoparticles (LNPs) were developed using lecithin sodium acetate (Lec-OAc) ionic complex as a core unit and quaternized inulin (QIn) as the shell part. Inulin (In) was modified using glycidyl trimethyl ammonium chloride (GTMAC) as a positively charged shell part and used for coating the negatively surface charged Lec-OAc. The critical micelle concentration (CMC) of the core was determined as 1.047 × 10^-4 M, which is expected to provide high stability in blood circulation as a drug-carrying compartment. The amounts of curcumin (Cur) and paclitaxel (Ptx) loaded to LNPs (CurPtx-LNPs), and quaternized inulin-coated LNPs (Cur-Ptx-QIn-LNPs) were optimized to obtain mono-dispersed particles with maximum payload. The total amount of 2.0 mg of the drug mixture (1 mg Cur and 1 mg Ptx) was the optimized quantity for QIn-LNPs and CurPtx-QIn-LNPs due to the favorable physicochemical properties determined by dynamic light scattering (DLS) studies. This inference was confirmed by differential scanning calorimeter (DSC), and Fourier-transform infrared (FT-IR). SEM and TEM images clearly revealed the spherical shapes of LNPs and QIn-LNPs, and QIn covered the LNPs completely. The cumulative release measurements of Cur and Ptx from CurPtx-QIn-LNPs, along with the kinetic studies, showed a significant decrease in the release period of drug molecules with the effect of the coating. At the same time, Korsmeyer-Peppas was the best diffusion-controlled release model. Coating of the LNPs with QIn increased the cell-internalization of NPs to the MDA-MB-231 breast cancer cell lines, resulting in a better toxicity profile than the empty LNPs.

Microbial Polysaccharide-Based Nanoformulations for Nutraceutical Delivery

In recent times, nutrition and diet have become prominent health paradigms due to sedentary lifestyle disorders. Preventive health care strategies are becoming increasingly popular instead of treating and managing diseases. A nutraceutical is an innovative concept that offers additional health benefits beyond its fundamental nutritional value. These nutraceuticals have the potential to reduce the exorbitant use of synthetic drugs because the modern medicine approach of treating diseases with high-tech, expensive supplements, and long-term consequences aggravates consumers. However, most nutraceuticals are plant-derived, making them susceptible to degradation and prone to chemical instability, poor solubility, unpleasant taste, and bioactivity loss before absorption to the targeted site. To counteract this problem, the bioavailability of these labile compounds can be maximized by encapsulating them in protective nanocarriers. It is crucial that nanoencapsulation technologies convert bioactive compounds into forms that can be easily combined with functional foods and beverages without adversely affecting their organoleptic properties. In recent years, nanoformulations using food-grade materials, such as polysaccharides, proteins, lipids, etc., have received considerable attention. Among them, microbial polysaccharides are biocompatible, nontoxic, and nonimmunogenic, and most of them are US-FDA approved and can undergo tailored modifications. The nanoformulation of microbial polysaccharide is a relatively new frontier which has several advantages over existing systems. The present article, for the first time, comprehensively reviews microbial polysaccharides-based nanodelivery systems for nutraceuticals and discusses various techno-commercial aspects of these nanotechnological preparations. Moreover, this has also attempted to draw a future research perspective in this area.

UV and Chemically Induced Halomonas smyrnensis Mutants for Enhanced Levan Productivity

Halomonas smyrnensis AAD6^T is a moderately halophilic bacterium proven to be a powerful biotechnological tool with its ability to accumulate valuable biopolymers such as levan and poly(3-hydroxybutyrate) (PHB). Levan is a fructose homopolymer with β-2,6 fructofuranosidic linkages on the polymer backbone, and its distinctive applications in various industries such as food, pharmaceutical, medical, and chemical have been well-defined. On the other hand, PHB is a promising raw material to produce biodegradable plastics. Although it was shown in our previous studies that H. smyrnensis AAD6^T exhibits one of the highest conversion yields of sucrose to levan reported to date, novel strategies are required to overcome high costs of levan production. In this study, we aimed at increasing levan productivity of H. smyrnensis AAD6^T cultures using random mutagenesis techniques combined (i.e., ethyl methanesulfate treatment and/or ultraviolet irradiation). After several consecutive treatments, mutant strains BAE2, BAE5 and BAE6 were selected as efficient levan producers, as BAE2 standing out as the most efficient one not only in sucrose utilization and levan production rates, but also in final PHB concentrations. The mutants' whole genome sequences were analysed to determine the mutations occurred. Several mutations in genes related to central carbon metabolism and osmoregulation were found. Our results suggest that random mutagenesis can be a facile and efficient strategy to enhance the performance of extremophiles in adverse conditions.

Enhancing the Kinetic Stability of Polymeric Nanomicelles (PLGA) Using Nano-Montmorillonite for Effective Targeting of Cancer Tumors

The toxic profile of chemical cross-linkers used in enhancing the stability of self-assembled nanomicelles made of amphiphilic polymeric materials hinders their use in clinical applications. This study was aimed to use the layered structure of Na-montmorillonite (MMT) as a stabilizer for nanomicelles made of poly(d,l-lactide-co-glycolide) (PLGA) amphiphilic polymer. The size of Na-MMT was reduced below 40 nm (nano-MMT) by processing in an attritor prior to its incorporation with PLGA. Hybrid PLGA nano-MMT (PM) nanoparticles (NPs) were prepared using dialysis nanoprecipitation. The size distribution was measured using dynamic light scattering (DLS). Loading 1250 μg of the model drug molecule curcumin to PM (PMC) resulted in obtaining 88 nm-sized particles, suitable for passive targeting of cancer tumors. The structure of nano-MMT and its position in PMC were investigated using FT-IR, differential scanning chalorimetry (DSC), XRF, XRD, ESEM, and EDAX assays, all of which showed the exfoliated structure of nano-MMT incorporated with both hydrophilic and hydrophobic blocks of PLGA. Curcumin was mutually loaded to PLGA and nano-MMT. This firm incorporation caused a serious extension in the release of curcumin from PMC compared to PLGA (PC). Fitting the release profile to different mathematical models showed the remarkable role of nano-MMT in surface modification of PLGA NPs. The ex vivo dynamic model showed the enhanced stability of PMC in simulated blood flow, while cytotoxicity assays showed that nano-MMT does not aggravate the good toxic profile of PLGA but improves the anticancer effect of payload. Nano-MMT could be used as an effective nontoxic stabilizer agent for self-assembled NPs.

Levan enhanced the NF-κB suppression activity of an oral nano PLGA-curcumin formulation in breast cancer treatment

Chemoresistance (CR) is one of the reasons why chemotherapy agents like Gemcitabine (GMC) remain insufficient in healing breast cancer. Activation of Nuclear Factor-kappa B (NF-κB) during chemotherapy is known as an important factor in the development of CR. The hydrophobic polyphenol curcumin is shown to inhibit NF-κB and hence CR. The aim of this work was to increase the poor bioavailability of curcumin by loading it into the nano-micelles made of Poly (Lactide-co-Glycolide) (PLGA) and levan, where levan as a natural fructose homopolymer makes the nano-micelle more stable and increases its uptake using the fructose moieties. In this study, a PLGA-levan-curcumin formulation (PLC) was designed and characterized. The size was measured as 154.16 ± 1.45 nm with a 67.68% encapsulation efficiency (EE%). The incorporation between the components was approved. Levan made the nano-micelles stable for at least three months, increased their uptake, and led to a 10,000-fold increase in the solubility of curcumin. The enhanced bioavailability of curcumin reduced the NF-κB levels elevated by GMC, both in vitro and in vivo. The PLC showed a complete tumor treatment, while GMC only showed a rate of 52%. These point to the great potential of the PLC to be used simultaneously with chemotherapy.

Synthesis and characterization of levan hydrogels and their use for resveratrol release

Considering the need for systematic studies on levan based hydrogels to widen their use in drug delivery systems and biomedical applications, this study is mainly focused on the synthesis and comprehensive characterization as well as drug release properties of hydrogels based on Halomonas levan (HL) and its chemical derivatives. For this, hydrolyzed and phosphonated HL derivatives were chemically synthesized and then cross-linked with 1,4-Butanediol diglycidyl ether (BDDE) and the obtained hydrogels were characterized in terms of their swelling, adhesivity, and rheological properties. Both native and phosphonated HL hydrogels retained their rigid gel like structure with increasing shear stress levels and tack test analysis showed superior adhesive properties of the phosphonated HL hydrogels. Moreover, hydrogels were loaded with resveratrol and entrapment and release studies as well as cell culture studies with human keratinocytes were performed. Biocompatible and adhesive features of the hydrogels confirmed their suitability for tissue engineering and drug delivery applications.

Quality by Design tools reducing the gap from bench to bedside for nanomedicine

Pharmaceutical nanotechnology research is focused on smart nano-vehicles, which can deliver active pharmaceutical ingredients to enhance their efficacy through any route of administration and in the most varied therapeutical application. The design and development of new nanopharmaceuticals can be very laborious. In recent years, the application of mathematics, statistics and computational tools is emerging as a convenient strategy for this purpose. The application of Quality by Design (QbD) tools has been introduced to guarantee quality for pharmaceutical products and improve translational research from the laboratory bench into applicable therapeutics. In this review, a collection of basic-concept, historical overview and application of QbD in nanomedicine are discussed. A specific focus has been put on Response Surface Methodology and Artificial Neural Network approaches in general terms and their application in the development of nanomedicine to monitor the process parameters obtaining optimized system ensuring its quality profile.

QbD enabled optimization of solvent shifting method for fabrication of PLGA-based nanoparticles for promising delivery of Capecitabine for antitumor activity

The key objective of the current research was to fabricate and optimize Capecitabine (Cap)-loaded [poly(lactic-co-glycolic acid)] PLGA-based nanoparticles (NPs) by enabling quality by design (QbD) approach for enhancing antitumor activity by promising delivery of the drug at the colonic site. The current research was based on fabricating PLGA-based nanoparticles along with Eudragit S100 as enteric polymer employing solvent shifting method followed by optimization using QbD approach. This approach was found to be useful for understanding the multiple factors and their interaction influencing the product by utilizing Design of Experiment (DOE). Box-Behnken design (BBD) was adopted to achieve the required critical quality attributes (CQAs), i.e., minimizing particle size, maximizing entrapment efficiency, and minimizing PDI value. The optimized nanoparticles were lyophilized and characterized by FT-IR, DSC, TEM, DLS, MTT assay using HT-29 cell lines, and in vivo pharmacokinetic studies. The optimized PLGA-based nanoparticles were found to possess average particle size, PDI, zeta potential, and entrapment efficiency of 195 nm, 0.214, -6.65 mV, and 65%, respectively. TEM analysis revealed the spherical nature of nanoparticles. The FT-IR and DSC studies revealed no interaction. The bioavailability of Cap-loaded nanoparticles was found to be two fold increased than the pure drug, and also, it exhibited significantly more cytotoxic to tumor cells as compared to pure drug as confirmed by MTT assay. The optimized PLGA-based nanoparticles found to possess enhanced bioavailability and significantly more cytotoxic potential as compared to pure drug.

A review of extracellular polysaccharides from extreme niches: An emerging natural source for the biotechnology. From the adverse to diverse!

Every year, new organisms that survive and colonize adverse environments are discovered and isolated. Those organisms, called extremophiles, are distributed throughout the world, both in aquatic and terrestrial environments, such as sulfurous marsh waters, hydrothermal springs, deep waters, volcanos, terrestrial hot springs, marine saltern, salt lakes, among others. According to the ecosystem inhabiting, extremophiles are categorized as thermophiles, psychrophiles, halophiles, acidophiles, alkalophilic, piezophiles, saccharophiles, metallophiles and polyextremophiles. They have developed chemical adaptation strategies that allow them to maintain their cellular integrity, altering physiology or improving repair capabilities; one of them is the biosynthesis of extracellular polysaccharides (EPS), which constitute a slime and hydrated matrix that keep the cells embedded, protecting from environmental stress (desiccation, salinity, temperature, radiation). EPS have gained interest; they are explored by their unique properties such as structural complexity, biodegradability, biological activities, and biocompatibility. Here, we present a review concerning the biosynthesis, characterization, and potential EPS applications produced by extremophile microorganisms, namely, thermophiles, halophiles, and psychrophiles. A bibliometric analysis was conducted, considering research articles published within the last two decades. Besides, an overview of the culture conditions used for extremophiles, the main properties and multiple potential applications of their EPS is also presented.

Electrospun PLGA Fiber Diameter and Alignment of Tendon Biomimetic Fleece Potentiate Tenogenic Differentiation and Immunomodulatory Function of Amniotic Epithelial Stem Cells

Injured tendons are challenging in their regeneration; thus, tissue engineering represents a promising solution. This research tests the hypothesis that the response of amniotic epithelial stem cells (AECs) can be modulated by fiber diameter size of tendon biomimetic fleeces. Particularly, the effect of electrospun poly(lactide-co-glycolide) (PLGA) fleeces with highly aligned microfibers possessing two different diameter sizes (1.27 and 2.5 µm: ha1- and ha2-PLGA, respectively) was tested on the ability of AECs to differentiate towards the tenogenic lineage by analyzing tendon related markers (Collagen type I: COL1 protein and mRNA Scleraxis: SCX, Tenomodulin: TNMD and COL1 gene expressions) and to modulate their immunomodulatory properties by investigating the pro- (IL-6 and IL-12) and anti- (IL-4 and IL-10) inflammatory cytokines. It was observed that fiber alignment and not fiber size influenced cell morphology determining the morphological change of AECs from cuboidal to fusiform tenocyte-like shape. Instead, fleece mechanical properties, cell proliferation, tenogenic differentiation, and immunomodulation were regulated by changing the ha-PLGA microfiber diameter size. Specifically, higher DNA quantity and better penetration within the fleece were found on ha2-PLGA, while ha1-PLGA fleeces with small fiber diameter size had better mechanical features and were more effective on AECs trans-differentiation towards the tenogenic lineage by significantly translating more efficiently SCX into the downstream effector TNMD. Moreover, the fiber diameter of 1.27 µm induced higher expression of pro-regenerative, anti-inflammatory interleukins mRNA expression (IL-4 and IL-10) with favorable IL-12/IL-10 ratio with respect to the fiber diameter of 2.5 µm. The obtained results demonstrate that fiber diameter is a key factor to be considered when designing tendon biomimetic fleece for tissue repair and provide new insights into the importance of controlling matrix parameters in enhancing cell differentiation and immunomodulation either for the cells functionalized within or for the transplanted host tissue.

Levan-based nanostructured systems: An overview

Bacterial levan is a fructose homopolymer that offers great potential in biotechnological applications due to biocompatibility, biodegradability and non-toxicity. This biopolymer possesses diverse multifunctional features, which translates into a wide range of applicability, including in industry, consumer products, pharmaceuticals and biomedicine. Extensive research has identified great potential for its exploitation in human health. In addition, nanostructured systems have provided significant advances in the area of health, mainly with respect to disease diagnosis and treatment. While the functional properties of these natural polysaccharide-based polymers are desirable in these systems, research in this area has been limited to few natural polymers, such as chitosan, alginate and dextran, which obscures the true potential of levan in the production of nanostructured systems for biotechnological and medical applications. The present review considers the latest research in the field to focus on the use of levan as a promising biopolymer for the development of nanomaterials.