Determination of the Tafel slope for oxygen evolution on boron-doped diamond electrodes

Metallic Glass Nanoparticles Synthesized via Flash Joule Heating

Metallic glass (MG) nanoparticles have attracted intensive research interest for their promising mechanical and catalytic applications. However, current production methods lack the ability to precisely control phase, composition, and morphology, making it challenging to explicitly study their structure-property relationship. Here, we report a direct one-step synthesis of MG nanoparticles using flash Joule heating (FJH) that allows us to produce nanoparticles with desired phase, composition, and morphology. With the fast and controllable cooling attainable through FJH, we can produce fully amorphous Pd-P, Pd-Ni-P, and Pd-Cu-P nanoparticles with precise control in alloy composition and particle size (2.33 nm ± 0.83 nm). As a demonstration of potential application, we show the improved oxygen evolution activity (∼300 mV lower onset potential) of the MG nanoparticles over their crystalline counterparts and long-term stability in 60-h testing.

Catalytic urea electrooxidation on nickel‐metal hydroxide foams for use in a simplified dialysis device

Electrocatalytic urea removal is a promising technology for artificial kidney dialysis and wastewater treatment. Urea electrooxidation was studied on nickel electrocatalysts modified with Cr, Mo, Mn, and Fe. Mass transfer limits were observed for urea oxidation at physiological concentrations (10 mmol L). Urea oxidation kinetics were explored at higher concentrations (200 mmol L), showing improved performance, but with lower currents per active site. A simplified dialysis model was developed to examine the relationship of mass transfer coefficients and extent of reaction on flowrate, composition, and pH of the reacting stream. For a nickel hydroxide catalyst operating at 1.45 V, 37 , and pH 7.1, the model shows a minimum geometric electrode area of 1314 cm2 is needed to remove 3.75 g urea h with a flow rate of 200 mL min for continuous operation.

Hierarchically Structured Graphene Aerogel Supported Nickel-Cobalt Oxide Nanowires as an Efficient Electrocatalyst for Oxygen Evolution Reaction

The rational design of a heterostructure electrocatalyst is an attractive strategy to produce hydrogen energy by electrochemical water splitting. Herein, we have constructed hierarchically structured architectures by immobilizing nickel-cobalt oxide nanowires on/beneath the surface of reduced graphene aerogels (NiCoO2/rGAs) through solvent-thermal and activation treatments. The morphological structure of NiCoO2/rGAs was characterized by microscopic analysis, and the porous structure not only accelerates the electrolyte ion diffusion but also prevents the agglomeration of NiCoO2 nanowires, which is favorable to expose the large surface area and active sites. As further confirmed by the spectroscopic analysis, the tuned surface chemical state can boost the catalytic active sites to show the improved oxygen evolution reaction performance in alkaline electrolytes. Due to the synergistic effect of morphology and composition effect, NiCoO2/rGAs show the overpotential of 258 mV at the current density of 10 mA cm-2. Meanwhile, the small values of the Tafel slope and charge transfer resistance imply that NiCoO2/rGAs own fast kinetic behavior during the OER test. The overlap of CV curves at the initial and 1001st cycles and almost no change in current density after the chronoamperometric (CA) test for 10 h confirm that NiCoO2/rGAs own exceptional catalytic stability in a 1 M KOH electrolyte. This work provides a promising way to fabricate the hierarchically structured nanomaterials as efficient electrocatalysts for hydrogen production.

Nitrogen-Rich Conjugated Microporous Polymers with Improved Cobalt(II) Density for Highly Efficient Electrocatalytic Oxygen Evolution

Developing efficient oxygen evolution catalysts (OECs) made from earth-abundant elements is extremely important since the oxygen evolution reaction (OER) with sluggish kinetics hinders the development of many energy-related electrochemical devices. Herein, an efficient strategy is developed to prepare conjugated microporous polymers (CMPs) with abundant and uniform coordination sites by coupling the N-rich organic monomer 2,4,6-tris(5-bromopyrimidin-2-yl)-1,3,5-triazine (TBPT) with Co(II) porphyrin. The resulting CMP-Py(Co) is further metallized with Co2+ ions to obtain CMP-Py(Co)@Co. Structural characterization results reveal that CMP-Py(Co)@Co has higher Co2+ content (12.20 wt %) and affinity toward water compared with CMP-Py(Co). Moreover, CMP-Py(Co)@Co exhibits an excellent OER activity with a low overpotential of 285 mV vs RHE at 10 mA cm-2 and a Tafel slope of 80.1 mV dec-1, which are significantly lower than those of CMP-Py(Co) (335 mV vs RHE and 96.8 mV dec-1). More interestingly, CMP-Py(Co)@Co outperforms most reported porous organic polymer-based OECs and the benchmark RuO2 catalyst (320 mV vs RHE and 87.6 mV dec-1). Additionally, Co2+-free CMP-Py(2H) has negligible OER activity. Thereby, the enhanced OER activity of CMP-Py(Co)@Co is attributed to the incorporation of Co2+ ions leading to rich active sites and enlarged electrochemical surface areas. Density functional theory (DFT) calculations reveal that Co2+-TBPT sites have higher activity than Co2+-porphyrin sites for the OER. These results indicate that the introduction of rich active metal sites in stable and conductive CMPs could provide novel guidance for designing efficient OECs.

Step-by-step guide for electrochemical generation of highly oxidizing reactive species on BDD for beginners

Selecting the ideal anodic potential conditions and corresponding limiting current density to generate reactive oxygen species, especially the hydroxyl radical (•OH), becomes a major challenge when venturing into advanced electrochemical oxidation processes. In this work, a step-by-step guide for the electrochemical generation of •OH on boron-doped diamond (BDD) for beginners is shown, in which the following steps are discussed: i) BDD activation (assuming it is new), ii) the electrochemical response of BDD (in electrolyte and ferri/ferro-cyanide), iii) Tafel plots using sampled current voltammetry to evaluate the overpotential region where •OH is mainly generated, iv) a study of radical entrapment in the overpotential region where •OH generation is predominant according to the Tafel plots, and v) finally, the previously found ideal conditions are applied in the electrochemical degradation of amoxicillin, and the instantaneous current efficiency and relative cost of the process are reported.

Large-scale sonochemical fabrication of a Co3O4-CoFe2O4@MWCNT bifunctional electrocatalyst for enhanced OER/HER performances

Herein, we have prepared a mixed-phase Co3O4-CoFe2O4@MWCNT nanocomposite through a cheap, large-scale, and facile ultrasonication route followed by annealing. The structural, morphological, and functional group analyses of the synthesized catalysts were performed by employing various characterization approaches such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The resultant samples were tested for bifunctional electrocatalytic activity through various electrochemical techniques: cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). The prepared Co3O4-CoFe2O4@MWCNT nanocomposite achieved a very high current density of 100 mA cm-2 at a lower (290 mV and 342 mV) overpotential (vs. RHE) and a smaller (166 mV dec-1 and 138 mV dec-1) Tafel slope in the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively, compared to Co3O4-CoFe2O4. The excellent electrochemical activity of the as-prepared electrocatalyst was attributed to the uniform incorporation of Co3O4-CoFe2O4 over MWCNTs which provides high redox active sites, a greater surface area, better conductivity, and faster charge mobility. Furthermore, the enhanced electrochemical active surface, low charge-transfer resistance (Rct), and higher exchange current density (J0) of the Co3O4-CoFe2O4@MWCNT ternary composite are attributed to its superior behavior as a bifunctional electrocatalyst. Conclusively, this study demonstrates a novel and large-scale synthesis approach for bifunctional electrocatalysts with a high aspect ratio and abundance of active sites for high-potential energy applications.

"d-electron interactions" induced CoV2O6-Fe-NF for efficient oxygen evolution reaction

The investigation of cost-effective, highly efficient, and environmentally friendly non-noble-metal-based electrocatalysts is imperative for oxygen evolution reactions (OER). Herein, CoV₂O₆ grown on nickel foam (NF) was selected as the fundamental material, and Fe²⁺ is introduced through a simple Fe³⁺ immersion treatment to synthesize CoV₂O₆-Fe-NF. Fe²⁺ is transformed into high oxidation state Fe^(2+δ)+ due to interactions between the 3d electrons of transition metals. In situ Raman spectroscopy analysis reveals the specific process of OER in the presence of Fe^(2+δ)+. Being in a higher oxidation state, Fe^(2+δ)+ provides more active sites, which is beneficial for the reaction between water molecules and the reactive sites of the electrocatalyst, ultimately enhancing the accelerated OER process. CoV₂O₆-Fe-NF exhibited an overpotential of only 298 mV at 100 mA cm^-2 in 1 M KOH electrolyte, which is lower than that of CoV₂O₆-NF (348 mV), as well as the comparative samples: Fe-NF (390 mV) and NF (570 mV). The exploration of high performance, triggered synergistically by the cooperative effect of transition metal 3d electrons, provides insights into the design of transition metal electrocatalysts for highly efficient OER.

Carbonized Polydopamine-Based Nanocomposites: The Effect of Transition Metals on the Oxygen Electrocatalytic Activity

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal-NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe₃C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance.

Electrocatalytic oxidation of low concentration cefotaxime sodium wastewater using Ti/SnO2-RuO2 electrode: Feasibility analysis and degradation mechanism

In this research, Ti/SnO₂-RuO₂ stable anode was successfully prepared by thermal decomposition method, and low concentration cefotaxime sodium (CFX) was degraded by green and sustainable electrocatalytic oxidation technology. The electrocatalytic activity and stability of the Ti/SnO₂-RuO₂ coating electrode were studied according to the polarization curve of oxygen and chlorine evolution. The effects of current density, initial concentration, pH, electrolyte concentration, and other technological parameters on the degradation efficiency were discussed. Orthogonal experiment results indicated that when the current density was 25 mA cm^-2, concentration of electrolyte was 5 mM and the pH value was 7, the best CFX removal rate of 86.33% could be obtained. The degradation efficiency of electrocatalytic oxidation was discussed through electrochemical analysis. Fourier transform infrared spectroscopy was used to analyze the different inlet and outlet stages before and after the degradation of CFX, and the possible degradation process was discussed. Therefore, the electrocatalytic oxidation of Ti/SnO₂-RuO₂ electrode was a clean and efficient technology, which could be widely used in the treatment of CFX wastewater.

Carbonate-Induced Electrosynthesis of Hydrogen Peroxide via Two-Electron Water Oxidation

Electrochemical synthesis of hydrogen peroxide (H₂ O₂ ), via the two-electron water oxidation reaction (2e^- WOR), is an attractive method for the sustainable production of valuable chemicals in place of oxygen during water electrolysis. While the majority of 2e^- WOR studies have focussed on electrocatalyst design, little research has been carried out on the selection of the supporting electrolyte. In this work, we investigate the impact of potassium carbonate (K₂ CO₃ ) electrolytes, and their key properties, on H₂ O₂ production. We found that at electrolyte pH values (>9.5) where the carbonate anion (CO₃ ^2- ) was prevalent in the mixture, a 26.5 % increase in the Faraday efficiency (%FE) for H₂ O₂ production was achieved, compared to bicarbonate (HCO₃ ^- ) dominant solutions. Utilising boron-doped diamond (BDD) in highly concentrated K₂ CO₃ solutions, current densities of up to 511 mA cm^-2 (in 4 m) and %FEs of 91.5 % (in 5 m) could be attained. The results presented in this work highlight the influence of CO₃ ^2- on electrochemical H₂ O₂ generation via the 2e^- WOR and provide novel pathways to produce desirable commodities at the anode during electrochemical water splitting.

Mixed Oxide Electrodes Based on Ruthenium and Copper: Electrochemical Properties as a Function of the Composition and Method of Manufacture

The development of mixed oxide electrodes is being intensively investigated to reduce the high cost associated with the use of noble metals and to obtain versatile and long-lasting devices. To evaluate their use for charge storage or anodic oxidation, in this paper, thin-film electrodes coated with ruthenium (RuOx) and copper oxide (CuOx) are fabricated by thermal decomposition of organic solutions containing the precursors by drop-casting on titanium (Ti) foils. The coating consisted of four layers of metal oxide. To investigate the effect of copper (Cu) on electrochemical performances, different approaches are adopted by varying the ratios of precursors’ concentration and including a RuOx interlayer. A comparison with samples obtained by only RuOx has been also performed. The electrodes are characterized using scanning electron microscopy (SEM), cyclic (CV) and linear sweep (LSV) voltammetry, electrochemical impedance spectroscopy (EIS), and corrosion tests. The addition of Cu enhances the capacitive response of the materials and promotes electron transfer reversibility. The coatings obtained by the highest Ru:Cu ratio (95:5) exhibit a more uniform surface distribution and increased corrosion resistance. The interlayer is beneficial to further reduce the corrosion susceptibility and to promote the oxygen evolution but detrimental in the charge storage power. The results suggest the possibility to enhance the electrochemical performance of expensive RuOx through a combination with a low amount of cheaper and more abundant CuOx.

Principles of Water Electrolysis and Recent Progress in Cobalt-, Nickel-, and Iron-Based Oxides for the Oxygen Evolution Reaction

Water electrolysis that results in green hydrogen is the key process towards a circular economy. The supply of sustainable electricity and availability of oxygen evolution reaction (OER) electrocatalysts are the main bottlenecks of the process for large-scale production of green hydrogen. A broad range of OER electrocatalysts have been explored to decrease the overpotential and boost the kinetics of this sluggish half-reaction. Co-, Ni-, and Fe-based catalysts have been considered to be potential candidates to replace noble metals due to their tunable 3d electron configuration and spin state, versatility in terms of crystal and electronic structures, as well as abundance in nature. This Review provides some basic principles of water electrolysis, key aspects of OER, and significant criteria for the development of the catalysts. It provides also some insights on recent advances of Co-, Ni-, and Fe-based oxides and a brief perspective on green hydrogen production and the challenges of water electrolysis.

Iron-modulated Ni3S2 derived from a Ni-MOF-based Prussian blue analogue for a highly efficient oxygen evolution reaction

Developing efficient, environmentally friendly and cost-effective non-precious metal electrocatalysts for the oxygen evolution reaction (OER) is essential to alleviate the energy crisis and environmental pollution.

Cation-Tuning Induced d-Band Center Modulation on Co-based Spinel Oxide for Rechargeable Zn-Air Batteries

Atomic substitutions at the tetrahedral site (A Td ) could theoretically achieve an efficient optimization of the charge at the octahedral site (B Oh ) through the A Td -O-B Oh interactions in the spinel oxides (AB2O4). However, the precise control and adjustment of the spinel oxides are still challenging owing to the complexity of their crystal structure. In this work, we demonstrate a simple solvent method to tailor the structures of spinel oxides and further use the spinel oxide composites (ACo2O4/NCNTs, A = Mn, Co, Ni, Cu, Zn) for oxygen electrocatalysis. And the optimized MnCo2O4/NCNTs exhibit high activity and excellent durability for oxygen reduction/evolution reactions. Remarkably, the rechargeable liquid Zn-air battery equipped the MnCo2O4/NCNTs cathode affords a specific capacity of 827 mAh gZn-1 with high power density of 74.63 mW cm-2 and no voltage degradation after 300 cycles at a high charging-discharging rate (5 mA cm-2). The density functional theory (DFT) calculations reveal that the substitution could regulate the ratio of Co3+/Co2+ and thereby lead to the electronic structure modulated accompanied with the movement of d-band center. The tetrahedral and octahedral sites interact through the Mn-O-Co, the Co3+ Oh of MnCo2O4 with the optimal charge structure allows more suitable binding interaction between the active center and the oxygenated species, resulting in superior oxygen electrocatalytic performance. This work not only proves the influence of the charge modulation mechanism on the oxygen catalysis process but also provides novel strategies for the subsequent design of other oxygen catalysis materials.

Facile synthesis of highly active Ti/Sb-SnO2 electrode by sol-gel spinning technique for landfill leachate treatment

Highly active Ti/Sb-SnO₂ electrodes were fabricated using sol-gel spin coating procedure, which exhibited a rough, uniform and multilayer coating structure. The effects of different Sb-SnO₂ film layers on the physiochemical, electrochemical properties and pollutant degradability of electrodes and the mechanism were evaluated on a systematic basis. The electrodes with more active layers exhibited higher electro-catalytic performance. Upon exceeding 8 layers, the promotion effect of the coating was reduced. Considering various factors, this paper recommends preparing Ti/Sb-SnO₂ electrodes coated with 8 layers to obtain higher electro-catalytic ability in landfill leachate treatment. The specific number of coating layers should be determined according to the electrode requirements. This work provided a theoretical basis and technical support for the preparation of Ti-SnO₂ electrodes with high electro-catalytic activity and stability, while it still remains a great challenge to achieve an excellent balance between performance and stability before Ti/Sb-SnO₂ electrodes can be implemented on a large scale in wastewater treatment.

Boron-doped graphene as electrocatalytic support for iridium oxide for oxygen evolution reaction

The present work details the development of IrO₂ nanoparticles (nps) supported on B-doped reduced graphene oxide as an oxygen evolution reaction (OER) electrocatalyst for electrochemical water splitting.

Enhancing Electrochemical Efficiency of Hydroxyl Radical Formation on Diamond Electrodes by Functionalization with Hydrophobic Monolayers

Electrochemical formation of high-energy species such as hydroxyl radicals in aqueous media is inefficient because oxidation of H₂O to form O₂ is a more thermodynamically favorable reaction. Boron-doped diamond (BDD) is widely used as an electrode material for generating ^•OH radicals because it has a very large kinetic overpotential for O₂ production, thus increasing electrochemical efficiency for ^•OH production. Yet, the underlying mechanisms of O₂ and ^•OH production at diamond electrodes are not well understood. We demonstrate that boron-doped diamond surfaces functionalized with hydrophobic, polyfluorinated molecular ligands (PF-BDD) have significantly higher electrochemical efficiency for ^•OH production compared with hydrogen-terminated (H-BDD), oxidized (O-BDD), or poly(ethylene ether)-functionalized (E-BDD) boron-doped diamond samples. Our measurements show that ^•OH production is nearly independent of surface functionalization and pH (pH = 7.4 vs 9.2), indicating that ^•OH is produced by oxidation of H₂O in an outer-sphere electron-transfer process. In contrast, the total electrochemical current, which primarily produces O₂, differs strongly between samples with different surface functionalizations, indicating an inner-sphere electron-transfer process. X-ray photoelectron spectroscopy measurements show that although both H-BDD and PF-BDD electrodes are oxidized over time, PF-BDD showed longer stability (≈24 h of use) than H-BDD. This work demonstrates that increasing surface hydrophobicity using perfluorinated ligands selectively inhibits inner-sphere oxidation to O₂ and therefore provides a pathway to increased efficiency for formation of ^•OH via an outer-sphere process. The use of hydrophobic electrodes may be a general approach to increasing selectivity toward outer-sphere electron-transfer processes in aqueous media.

Recent Advances in Metallic Glass Nanostructures: Synthesis Strategies and Electrocatalytic Applications

Recent advances in metallic glass nanostructures (MGNs) are reported, covering a wide array of synthesis strategies, computational discovery, and design solutions that provide insight into distinct electrocatalytic applications. A brief introduction to the development and unique features of MGNs with an overview of top-down and bottom-up synthesis strategies is presented. Specifically, the morphology and structural analysis of several examples applying MGNs as electrodes are highlighted. Subsequently, a comprehensive discussion of commonly employed kinetic parameters and their connection with the unique material structures of MGNs on individual electrocatalytic reactions is made, including the hydrogen evolution reaction, oxygen reduction reaction, and alcohol (methanol or ethanol) oxidation reaction. Finally, a summary of the challenges and perspective on the future research and development relevant to MGNs as electrocatalysts is provided.

MoS2-modified porous gas diffusion layer with air-solid-liquid interface for efficient electrocatalytic water splitting

The formation and adsorption of bubbles on electrodes weaken the efficiency of gas evolution reactions such as the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by hindering proton transfer and consuming nucleation energy. Herein, a triphase electrode was fabricated to address this limitation by immobilizing MoS2 nanosheets on a porous gas diffusion layer (GDL). This electrode shows a superior HER and OER ratio, high current density and stable working state in electrocatalytic water splitting. Moreover, by lowering the pressure behind the GDL, we further improved the water-splitting rate (the current density was three times higher than that of a bare MoS2 diphase electrode at -0.37 V for HER and 1.62 V for OER) and stability by eliminating the appearance of bubbles, even under a current density as high as 100 mA cm-2. Our work manifests the significance of constructing a triphase system for water splitting, and the system is also available for other gas evolution reactions.

Gaseous trichloroethylene removal using an electrochemically generated homogeneous low-valent ligand-free Co(I) electrocatalyst by electro-scrubbing

The interest in heterogeneous Co(OH)2 electrocatalysts for energy applications has increased steadily. This study focused on a ligand-free homogeneous electrocatalyst for the degradation of gaseous trichloroethylene (TCE) in NaOH in a divided electrolytic cell. The initial electrolysis results revealed a change in the oxidation reduction potential (ORP) of [Co(II)(OH)4](2-) (Co(II)) from -267 mV to -800 mV on anodized Ti during electrolytic reduction identifies low-valent homogeneous [Co(I)(OH)4](3-)(Co(I)) formation in 10 M NaOH. Cyclic voltammetry analysis of Co(II) at different anodized electrodes, Ag, carbon and Ti, in a 10 M NaOH solution, showed no stripping like peak in the reverse scan only the Ti electrode, supporting the formation of low-valent Co(I). UV-vis spectral analysis of the electrolyzed solution showed an enhanced peak corresponding to metal-to-ligand transition, demonstrates Co(I) formation. Co(II) reduction reached a maximum yield of 18% at 30 mA cm(-2) on an anodized Ti cathode. For gaseous TCE removal, continuous mode electro-scrubbing was adopted and degradation was monitored using an online FTIR gas analyzer that showed 99.75% degradation of TCE in the presence of homogeneous Co(I). Three consecutive regenerations of Co(I) and degradation steps of TCE confirmed the possibility of industrial applications in a sustainable manner.

Performance of electrochemical oxidation process for removal of di (2-ethylhexyl) phthalate

Di (2-ethylhexyl) phthalate (DEHP) is the most detected and concentrated plasticizer in environment and wastewaters, worldwide. In this study, different operating parameters such as current intensity, treatment time, type of anodes, and supporting electrolytes were tested to optimized the electro-oxidation process (EOP) for the removal of DEHP in the presence of methanol as a dissolved organic matter. Among the anodes, the Nb/BDD showed the best degradation rate of DEHP, at low current intensity of 0.2 A after 90 min of treatment time with a percentage of degradation recorded of 81 %, compared to 70 % obtained with the Ti/IrO2-RuO2. Furthermore, due to the combination of direct and indirect oxidation, the removal of DEHP in the presence of 1 g/L Na2SO4 was higher than NaBr, even though the oxidant production of NaBr was 11.7 mmol/L against 3.5 mmol/L recorded in the presence of sulfate at 0.5 A and after 60 min of electrolysis time. Under optimal condition (current intensity = 0.5 A, time = 120 min, using Nb/BDD anode and Na2SO4 as supporting electrolyte), the removal of 87.2 % of DEHP was achieved. The total cost of 0.106 US$/m(3) of treated water was achieved based on economical optimization of reactor with current intensity of 0.2 A and 1 g/L Na2SO4.

Effect of doping level of colored TiO2 nanotube arrays fabricated by electrochemical self-doping on electrochemical properties

The objective of this study was to investigate the effect of the doping level of blue and black TiO₂ NTAs on their electrochemical properties, including the capacitive and oxidant-generating properties.

Comprehensive Study of an Earth-Abundant Bifunctional 3D Electrode for Efficient Water Electrolysis in Alkaline Medium

We report efficient electrolysis of both water-splitting half reactions in the same medium by a bifunctional 3D electrode comprising Co3O4 nanospheres nucleated on the surface of nitrogen-doped carbon nanotubes (NCNTs) that in turn are grown on conductive carbon paper (CP). The resulting electrode exhibits high stability and large electrochemical activity for both oxygen and hydrogen evolution reactions (OER and HER). We obtain a current density of 10 mA/cm(2) in 0.1 M KOH solution at overpotentials of only 0.47 and 0.38 V for OER and HER, respectively. Additionally, the experimental observations are understood and supported by analyzing the Co3O4:NCNT and NCNT:CP interfaces by ab initio calculations. Both the experimental and the theoretical studies indicate that firm and well-established interfaces along the electrode play a crucial role on the stability and electrochemical activity for both OER and HER.

Removal of carbamazepine from spiked municipal wastewater using electro-Fenton process

The electrochemical degradation of carbamazepine (CBZ) in both synthetic solutions (CBZo = 12 mg/L) and enriched municipal effluents (CBZo = 60-70 μg/L) was investigated using an electro-Fenton (EF) process. Different operating parameters were investigated, including current intensity, pH, reaction time, ferrous ion concentration, and the type of anode material. The current intensity, the type of anode material, and the concentration of ferrous ions played an important role in the CBZ degradation efficiency. The degradation was mainly attributed to direct anodic oxidation. The best operating conditions for the synthetic sample were obtained at a current density of 0.2 A, a pH of 3.0, and 120 min of treatment using a boron-doped diamond (BDD) anode in the presence of 0.25 mM of Fe(2+). Under these conditions, 52% of total organic carbon (TOC) and 73% of CBZ were removed. The process was also tested as tertiary treatment for a municipal wastewater treatment plant effluent, and CBZ was completely removed.