Dissolution of zinc oxide in a protic ionic liquid with the 1-methylimidazolium cation and electrodeposition of zinc from ZnO/ionic liquid and ZnO/ionic liquid–water mixtures

Phosphonium Ionic Liquid-Activated Sulfur Vulcanization: A Way Forward to Reduce Zinc Oxide Levels in Industrial Rubber Formulations

Extensive use of zinc oxide and accelerators such as diphenyl guanidine (DPG) in the vulcanization of rubber composites entail potential environmental risks. These are pervasive contaminants of roadway runoff originating from tire wear particles (TWPs). Herein, the effect of phosphonium ionic liquids (PILs) in styrene-butadiene rubber compounds was demonstrated with reduced ZnO loading and no DPG to minimize the environmental footprint of the vulcanization process. The structure and chemistry of PILs were found to be the influencing parameters impelling the cross-linking kinetics, enabling shorter induction times. The generation of active Zn²⁺ sites by PILs was examined through FTIR spectroscopy, calorimetry, and molecular dynamics simulations. From a tire application perspective, the PILs not only enhanced the cure kinetics but also improved the dynamic-mechanical behavior of the rubber composites. Consequently, the harm caused by TWPs to the atmosphere, fuel intake, and CO₂ emissions was minimal, thereby confirming the potential use of PILs in the tire industry.

Ionic liquids on oxide surfaces

Ionic liquids (ILs) supported on oxide surfaces are being investigated for numerous applications including catalysis, batteries, capacitors, transistors, lubricants, solar cells, corrosion inhibitors, nanoparticle synthesis and biomedical applications. The study of ILs with oxide surfaces presents challenges both experimentally and computationally. The interaction between ILs and oxide surfaces can be rather complex, with defects in the oxide surface playing a key role in the adsorption behaviour and resulting electronic properties. The choice of the cation/anion pair is also important and can influence molecular ordering and electronic properties at the interface. These controllable interfacial behaviours make ionic liquid/oxide systems desirable for a number of different technological applications as well as being utilised for nanoparticle synthesis. This topical review aims to bring together recent experimental and theoretical work on the interaction of ILs with oxide surfaces, including TiO₂, ZnO, Al₂O₃, SnO₂and transition metal oxides. It focusses on the behaviour of ILs at model single crystal surfaces, the interaction between ILs and nanoparticulate oxides, and their performance in prototype devices.

Recent Advances in Electrolytes for "Beyond Aqueous" Zinc-Ion Batteries

With the growing demands for large-scale energy storage, Zn-ion batteries (ZIBs) with distinct advantages, including resource abundance, low-cost, high-safety, and acceptable energy density, are considered as potential substitutes for Li-ion batteries. Although numerous efforts are devoted to design and develop high performance cathodes and aqueous electrolytes for ZIBs, many challenges, such as hydrogen evolution reaction, water evaporation, and liquid leakage, have greatly hindered the development of aqueous ZIBs. Developing "beyond aqueous" electrolytes can be able to avoid these issues due to the absence of water, which are beneficial for the achieving of highly efficient ZIBs. In this review, the recent development of the "beyond aqueous" electrolytes, including conventional organic electrolytes, ionic liquid, all-solid-state, quasi-solid-state electrolytes, and deep eutectic electrolytes are presented. The critical issues and the corresponding strategies of the designing of "beyond aqueous" electrolytes for ZIBs are also summarized.

Properties and Recent Advantages of N,N’-dialkylimidazolium-ion Liquids Application in Electrochemistry

:

N,Nʹ-dialkylimidazolium-ion liquids is one of the important ionic liquids with a wide range of application as conductive electrolyte and in electrochemistry. The modified electrodes create a new view in fabrication of electroanalytical sensors. Many modifiers have beeen suggested for modification of electroanalytical sensor since many years ago. Over these years, ionic liquids and especially room temperature ionic liquids have attracted more attention due to their wide range of electrochemical windows and high electrical conductivity. N,Nʹ-dialkylimidazolium-ion liquids are one of the main important ionic liquids suggested for modification of bare electrodes and especially carbon paste electrodes. Although many review articles have reported onthe use of ionic liquids in electrochemical sensors, no review article has been specifically introduced so far on the review of the advantages of N,Nʹ-dialkylimidazolium ionic liquid. Therefore, in this review paper we focused on the introduction of recent advantages of N,Nʹ-dialkyl imidazolium ionic liquid in electrochemistry.

Ionometallurgical Step-Electrodeposition of Zinc and Lead and its Application in a Cycling-Stable High-Voltage Zinc-Graphite Battery

Ionometallurgy is a new development aiming at the sustainable low-temperature conversion of naturally occurring metal ores and minerals to their metals or valuable chemicals in ionic liquids (ILs) or deep eutectic solvents. The IL betainium bis((trifluoromethyl)sulfonyl)imide, [Hbet][NTf₂ ], is especially suited for this process due to its redox-stability and specific-functionalization. The potentiostatic electrodeposition of zinc and lead starting directly from ZnO and PbO, which dissolve in [Hbet][NTf₂ ] in high concentrations is reported. The initial reduction potentials of zinc(II) and lead(II) are about -1.5 and -1.0 V, respectively. The ionic conductivity of the solution of ZnO in [Hbet][NTf₂ ] is measured and the effect of various temperatures and potentials on the morphology of the deposited material is explored. The IL proves to be stable under the chosen conditions. From IL-solutions, where ZnO, PbO, and MgO have been dissolved, metallic Zn and Pb are deposited under potentiostatic control either consecutively by step-electrodeposition or together in a co-electrodeposition. Using the method, Zn is also deposited on 3D copper foam and assembles into high-voltage zinc-graphite battery. It exhibits a working-voltage up to 2.7 V, an output midpoint discharge-voltage of up to 2.16 V, up to 98.6% capacity-retention after 150 cycles, and good rate performance.

In Situ Preconcentration during the Di-(2-ethylhexyl) Phosphoric Acid-Assisted Dissolution of Uranium Trioxide in an Ionic Liquid: Spectroscopic, Electrochemical, and Theoretical Studies

Dissolution of uranium oxide was carried out using a solution of HD2EHP in C₈mim·NTf₂, which was apparently facilitated by the in situ generation of water during the complex formation reaction. The dissolved complex in the ionic liquid phase led to splitting of the latter into a light phase and a heavy phase where the former contained predominantly the UO₂(HL₂)₂ complex (HL = HD2EHP), while the latter contained the ionic liquid as supported by FTIR and UV-Visible spectral analyses. The complexation of the uranyl ion was suggested to take place in the equatorial plane where two dimeric units of the H-bonded HD2EHP molecules took part in complexation. An increase in temperature facilitated the dissolution rate with an activation energy of 31.0 ± 2.8 kJ/mol. The cyclic voltammetry studies indicated potential chances of recovery of the dissolved uranium by electrodeposition at the cathode. The proposed dimeric structure of HD2EHP in the complexation with U(VI) was supported by DFT studies also.

Confinement of Zinc Salt in Ultrathin Heterogeneous Film to Stabilize Zinc Metal Anode

Aqueous zinc metal batteries (AZMBs) have drawn great attention due to the high theoretical capacity, low redox potential, and abundance reserves. However, the practical application of rechargeable AZMBs are hindered by the poor reversibility of Zn metal anode, owing to easy dendrite growth and serious side reactions. Herein, the preparation of heterogeneous interfacial film with highly dispersed and confined zinc salt in a 2D channel by coassembling polyamide 6, zinc trifluoromethanesulfonate, and layered double hydroxides, which significantly suppresses the dendrite formation, H₂ evolution reaction as well as O₂ corrosion is reported. The as-developed Zn anodes exhibit a long cycling life up to 1450 h with low reversible deposition potential. Moreover, the assembled Zn||Mn battery delivers a high initial capacity of 321 mAh g^-1 and a low capacity decay of ≈0.05% per cycle after 590 cycles, which is promising for high-performance AZMBs. A fluorescent film to realize the in situ observation of the Zn anode during cycling, which provides a new chance for visual observation of the working state of the Zn interface, is also assembled.

Recoverable peroxidase-like Fe3O4@MoS2-Ag nanozyme with enhanced antibacterial ability

Antibacterial agents with enzyme-like properties and bacteria-binding ability have provided an alternative method to efficiently disinfect drug-resistance microorganism. Herein, a Fe₃O₄@MoS₂-Ag nanozyme with defect-rich rough surface was constructed by a simple hydrothermal method and in-situ photodeposition of Ag nanoparticles. The nanozyme exhibited good antibacterial performance against E. coli (~69.4%) by the generated ROS and released Ag⁺, while the nanozyme could further achieve an excellent synergistic disinfection (~100%) by combining with the near-infrared photothermal property of Fe₃O₄@MoS₂-Ag. The antibacterial mechanism study showed that the antibacterial process was determined by the collaborative work of peroxidase-like activity, photothermal effect and leakage of Ag⁺. The defect-rich rough surface of MoS₂ layers facilitated the capture of bacteria, which enhanced the accurate and rapid attack of •OH and Ag⁺ to the membrane of E. coli with the assistance of local hyperthermia. This method showed broad-spectrum antibacterial performance against Gram-negative bacteria, Gram-positive bacteria, drug-resistant bacteria and fungal bacteria. Meanwhile, the magnetism of Fe₃O₄ was used to recycle the nanozyme. This work showed great potential of engineered nanozymes for efficient disinfection treatment.

A High-Energy and Long-Life Aqueous Zn/Birnessite Battery via Reversible Water and Zn2+ Coinsertion

Aqueous rechargeable Zn/birnessite batteries have recently attracted extensive attention for energy storage system because of their low cost and high safety. However, the reaction mechanism of the birnessite cathode in aqueous electrolytes and the cathode structure degradation mechanics still remain elusive and controversial. In this work, it is found that solvation water molecules coordinated to Zn²⁺ are coinserted into birnessite lattice structure contributing to Zn²⁺ diffusion. However, the birnessite will suffer from hydroxylation and Mn dissolution with too much solvated water coinsertion. Through engineering Zn²⁺ primary solvation sheath with strong-field ligand in aqueous electrolyte, highly reversible [Zn(H₂ O)₂ ]²⁺ complex intercalation/extraction into/from birnessite cathode is obtained. Cathode-electrolyte interface suppressing the Mn dissolution also forms. The Zn metal anode also shows high reversibility without formation of "death-zinc" and detrimental dendrite. A full cell coupled with birnessite cathode and Zn metal anode delivers a discharge capacity of 270 mAh g^-1 , a high energy density of 280 Wh kg^-1 (based on total mass of cathode and anode active materials), and capacity retention of 90% over 5000 cycles.

Hydrogen-Free and Dendrite-Free All-Solid-State Zn-Ion Batteries

An ionic-liquid-based Zn salt electrolyte is demonstrated to be an effective route to solve both the side-reaction of the hydrogen evolution reaction (HER) and Zn-dendrite growth in Zn-ion batteries. The developed electrolyte enables hydrogen-free, dendrite-free Zn plating/stripping over 1500 h cycle (3000 cycles) at 2 mA cm^-2 with nearly 100% coulombic efficiency. Meanwhile, the oxygen-induced corrosion and passivation are also effectively suppressed. These features bring Zn-ion batteries an unprecedented long lifespan over 40 000 cycles at 4 A g^-1 and high voltage of 2.05 V with a cobalt hexacyanoferrate cathode. Furthermore, a 28.6 µm thick solid polymer electrolyte of a poly(vinylidene fluoride-hexafluoropropylene) film filled with poly(ethylene oxide)/ionic-liquid-based Zn salt is constructed to build an all-solid-state Zn-ion battery. The all-solid-state Zn-ion batteries show excellent cycling performance of 30 000 cycles at 2 A g^-1 at room temperature and withstand high temperature up to 70 °C, low temperature to -20 °C, as well as abuse test of bending deformation up to 150° for 100 cycles and eight times cutting. This is the first demonstration of an all-solid-state Zn-ion battery based on a newly developed electrolyte, which meanwhile solves the deep-seated hydrogen evolution and dendrite growth problem in traditional Zn-ion batteries.

Synthesis and Dissolution of Metal Oxides in Ionic liquids and Deep Eutectic Solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have proven to be suitable solvents and reactants for low-temperature reactions. To date, several attempts were made to apply this promising class of materials to metal oxide chemistry, which, conventionally, is performed at high temperatures. This review gives an overview about the scientific approaches of the synthesis as well as the dissolution of metal oxides in ILs and DESs. A wide range of metal oxides along with numerous ILs and DESs are covered by this research. With ILs and DESs being involved, many metal oxide phases as well as different particle morphologies were obtained by means of relatively simple reactions paths. By the development of acidic task-specific ILs and DESs, even difficultly soluble metal oxides were dissolved and, hence, made accessible for downstream chemistry. Especially the role of ILs in these reactions is in the focus of discussion.

Highly reversible zinc metal anode for aqueous batteries

Metallic zinc (Zn) has been regarded as an ideal anode material for aqueous batteries because of its high theoretical capacity (820 mA h g^-1), low potential (-0.762 V versus the standard hydrogen electrode), high abundance, low toxicity and intrinsic safety. However, aqueous Zn chemistry persistently suffers from irreversibility issues, as exemplified by its low coulombic efficiency (CE) and dendrite growth during plating/ stripping, and sustained water consumption. In this work, we demonstrate that an aqueous electrolyte based on Zn and lithium salts at high concentrations is a very effective way to address these issues. This unique electrolyte not only enables dendrite-free Zn plating/stripping at nearly 100% CE, but also retains water in the open atmosphere, which makes hermetic cell configurations optional. These merits bring unprecedented flexibility and reversibility to Zn batteries using either LiMn₂O₄ or O₂ cathodes-the former deliver 180 W h kg^-1 while retaining 80% capacity for >4,000 cycles, and the latter deliver 300 W h kg^-1 (1,000 W h kg^-1 based on the cathode) for >200 cycles.

Suppressing the dendritic growth of zinc in an ionic liquid containing cationic and anionic zinc complexes for battery applications

Metallic zinc is a promising negative electrode for high energy rechargeable batteries due to its abundance, low-cost and non-toxic nature. However, the formation of dendritic zinc and low Columbic efficiency in aqueous alkaline solutions during charge/discharge processes remain a great challenge. Here we demonstrate that the dendritic growth of zinc can be effectively suppressed in an ionic liquid electrolyte containing highly concentrated cationic and anionic zinc complexes obtained by dissolving zinc oxide and zinc trifluoromethylsulfonate in a protic ionic liquid, 1-ethylimidazolium trifluoromethylsulfonate. The presence of both cationic and anionic zinc complexes alters the interfacial structure at the electrode/electrolyte interface and influences the nucleation and growth of zinc, leading to compact, homogeneous and dendrite-free zinc coatings. This study also provides insights into the development of highly concentrated metal salts in ionic liquids as electrolytes to deposit dendrite-free zinc as an anode material for energy storage applications.

Tuning the electronic environment of zinc ions with a ligand for dendrite-free zinc deposition in an ionic liquid

Dendrite-free zinc was obtained by tuning the electronic environment of zinc ions and the interfacial structure at the interface with a ligand.

Real-Time X-ray Imaging Reveals Interfacial Growth, Suppression, and Dissolution of Zinc Dendrites Dependent on Anions of Ionic Liquid Additives for Rechargeable Battery Applications

The dynamic interfacial growth, suppression, and dissolution of zinc dendrites have been studied with the imidazolium ionic liquids (ILs) as additives on the basis of in situ synchrotron radiation X-ray imaging. The phase contrast difference of real-time images indicates that zinc dendrites are preferentially developed on the substrate surface in the ammoniacal electrolytes. After adding imidazolium ILs, both nucleation overpotential and polarization extent increase in the order of additive-free < EMI-Cl < EMI-PF₆ < EMI-TFSA < EMI-DCA. The real-time X-ray images show that the EMI-Cl can suppress zinc dendrites, but result in the formation of the loose deposits. The EMI-PF₆ and EMI-TFSA additives can smooth the deposit morphology through suppressing the initiation and growth of dendritic zinc. The addition of EMI-DCA increases the number of dendrite initiation sites, whereas it decreases the growth rate of dendrites. Furthermore, the dissolution behaviors of zinc deposits are compared. The zinc dendrites show a slow dissolution process in the additive-free electrolyte, whereas zinc deposits are easily detached from the substrate in the presence of EMI-Cl, EMI-PF₆, or EMI-TFSA due to the formation of the loose structure. Hence, the dependence of zinc dendrites on anions of imidazolium IL additives during both electrodeposition and dissolution processes has been elucidated. These results could provide the valuable information in perfecting the performance of zinc-based rechargeable batteries.

High performance of electrochemical lithium storage batteries: ZnO-based nanomaterials for lithium-ion and lithium-sulfur batteries

As one of the most promising electrode materials, zinc oxide-based nanomaterials have attracted great attention in recent decades for remarkable features such as relatively low cost, relatively high reversible capacity and good physical and chemical stability. In this article, we aim to present a general review of synthetic methods of zinc oxide-based nanomaterials and related morphologies. In addition, recent advances in lithium storage batteries are summarized and discussed (lithium-ion and lithium-sulfur batteries). Tentative conclusions and assessments aim to promote the next generation of electrochemical lithium storage devices.

Tandem dissolution of UO3 in amide-based acidic ionic liquid and in situ electrodeposition of UO2 with regeneration of the ionic liquid: a closed cycle

A closed cycle is demonstrated for the tandem dissolution and electroreduction of UO₃ to UO₂ with regeneration of the acidic ionic liquid.