Ultrasmall and uniform Pt3Au clusters strongly suppress Ostwald ripening for efficient ethanol oxidation

Long-term continuous ammonia electrosynthesis

Ammonia is crucial as a fertilizer and in the chemical industry and is considered to be a carbon-free fuel1. Ammonia electrosynthesis from nitrogen under ambient conditions offers an attractive alternative to the Haber-Bosch process2,3, and lithium-mediated nitrogen reduction represents a promising approach to continuous-flow ammonia electrosynthesis, coupling nitrogen reduction with hydrogen oxidation4. However, tetrahydrofuran, which is commonly used as a solvent, impedes long-term ammonia production owing to polymerization and volatility problems. Here we show that a chain-ether-based electrolyte enables long-term continuous ammonia synthesis. We find that a chain-ether-based solvent exhibits non-polymerization properties and a high boiling point (162 °C) and forms a compact solid-electrolyte interphase layer on the gas diffusion electrode, facilitating ammonia release in the gas phase and ensuring electrolyte stability. We demonstrate 300 h of continuous operation in a flow electrolyser with a 25 cm2 electrode at 1 bar pressure and room temperature, and achieve a current-to-ammonia efficiency of 64 ± 1% with a gas-phase ammonia content of approximately 98%. Our results highlight the crucial role of the solvent in long-term continuous ammonia synthesis.

Phenol as proton shuttle and buffer for lithium-mediated ammonia electrosynthesis

Ammonia is a crucial component in the production of fertilizers and various nitrogen-based compounds. Now, the lithium-mediated nitrogen reduction reaction (Li-NRR) has emerged as a promising approach for ammonia synthesis at ambient conditions. The proton shuttle plays a critical role in the proton transfer process during Li-NRR. However, the structure-activity relationship and design principles for effective proton shuttles have not yet been established in practical Li-NRR systems. Here, we propose a general procedure for verifying a true proton shuttle and established design principles for effective proton shuttles. We systematically evaluate several classes of proton shuttles in a continuous-flow reactor with hydrogen oxidation at the anode. Among the tested proton shuttles, phenol exhibits the highest Faradaic efficiency of 72 ± 3% towards ammonia, surpassing that of ethanol, which has been commonly used so far. Experimental investigations including operando isotope-labelled mass spectrometry proved the proton-shuttling capability of phenol. Further mass transport modeling sheds light on the mechanism.

A universal strategy for green and surfactant-free synthesis of noble metal nanoparticles

We propose a universal, green, and surfactant-free strategy to synthesize noble metal particles with high monodispersity using gaseous H2 as a reducing agent in a solution at 60 °C. The prepared Pt nanoparticles have a 24 mV more positive half-wave potential than the commercially available Pt/C in the oxygen reduction reaction, while showing high durability with negligible half-wave potential decay after 10 000 cycles of testing.

Pd3Co1 Alloy Nanocluster on the MWCNT Catalyst for Efficient Formic Acid Electro-Oxidation

In this study, the Pd₃Co₁ alloy nanocluster from a multiwalled carbon nanotube (MWCTN) catalyst was fabricated in deep eutectic solvents (DESs) (referred to Pd₃Co₁/CNTs). The catalyst shows a better mass activity towards the formic acid oxidation reaction (FAOR) (2410.1 mA mg_Pd^-1), a better anti-CO toxicity (0.36 V) than Pd/CNTs and commercial Pd/C. The improved performance of Pd₃Co₁/CNTs is attributed to appropriate Co doping, which changed the electronic state around the Pd atom, lowered the d-band of Pd, formed a new Pd-Co bond act at the active sites, affected the adsorption of the toxic intermediates and weakened the dissolution of Pd; moreover, with the assistance of DES, the obtained ultrafine Pd₃Co₁ nanoalloy exposes more active sites to enhance the dehydrogenation process of the FAOR. The study shows a new way to construct a high-performance Pd-alloy catalyst for the direct formic acid fuel cell.

Fe(II)-Assisted one-pot synthesis of ultra-small core-shell Au-Pt nanoparticles as superior catalysts towards the HER and ORR

In this work, uniform ultra-small core-shell Au-Pt nanoparticles (denoted as USCS Au-Pt NPs) with Au-decorated Pt surfaces are successfully prepared by Fe(ii)-assisted one-pot co-reduction of Au(iii) ions and Pt(ii) ions in a citrate solution. The as-prepared USCS Au38.4@Au9.3Pt52.3 NPs have an average diameter of 2.3 ± 0.5 nm. It is found that the morphology, composition and size of Au-Pt NPs are highly dependent on the reaction conditions including the addition sequence of the precursors, and the concentrations of Fe(ii) ions, Au(iii) ions and Pt(ii) ions. In addition, USCS Au38.4@Au9.3Pt52.3-NP/C catalysts (USCS Au38.4@Au9.3Pt52.3 NPs loaded on the Vulcan XC-72R carbon black) exhibit excellent electrocatalytic performance towards the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) in acidic media due to the higher electrochemically active surface area (ECSA) and electronic effect between Pt and Au. For instance, USCS Au38.4@Au9.3Pt52.3-NP/C catalysts exhibited greatly enhanced HER activity in terms of overpotential (16 mV at a current density of -10 mA cm-2) and are better than commercial Pt/C catalysts (31 mV at a current density of -10 mA cm-2) reported in the literature thus far, to the best of our knowledge. Strikingly, their mass activity is about 13.1-fold higher than that of commercial Pt/C catalysts. Moreover, they also show an improved ORR activity, Eonset = 1.015 V and E1/2 = 0.896 V, which are positively shifted by nearly 28 mV and 21 mV than those of commercial Pt/C catalysts (0.987 V and 0.875 V), respectively. In addition, they also showed a higher kinetic current density (12.85 mA cm-2 at 0.85 V) and a better long-term durability. Our synthetic strategy presented here may be extended to the preparation of ultra-small Au-based bimetallic or multi-metallic NPs.

Optimization of Pt-Oxygen-Containing Species Anodes for Ethanol Oxidation Reaction: High Performance of Pt-AuSnOx Electrocatalyst

Pt-oxygen-containing species (Pt-OCS) catalysts, in which OCS (e.g., metal-oxides) are decorated on a Pt surface, possess enhanced ethanol oxidation reaction (EOR) activity and stability compared with pure Pt and are promising in practical applications of direct ethanol fuel cells. We investigate the promotion roles of Pt-OCS electrocatalysts toward the EOR via a combination of density functional theory (DFT) calculations and experiments, providing a rational design strategy for Pt-OCS catalysts. It is revealed that Pt-AuO and Pt-SnO excel in EOR activity and stability, respectively, among the DFT screening of various Pt-OCS systems, and this is confirmed by the following experiments. Moreover, an optimized Pt-AuSnO catalyst is proposed by DFT calculations, taking advantage of both Pt-AuO and Pt-SnO. The as-prepared Pt-AuSnO catalyst delivers an EOR activity that is 9.7 times higher than that of Pt and shows desired stability. These findings are expected to elucidate the mechanistic insights into Pt-OCS materials and lead to advanced EOR electrocatalysts.

Crystallization of zinc oxide quantum dots on graphene sheets as an anode material for lithium ion batteries

A zinc oxide quantum dot/reduced graphene oxide (ZnO/RGO) composite is prepared for the first time by a stepped graphene oxide (GO) reduction strategy.