Potential of a deep eutectic solvent in silver nanoparticle fabrication for antibiotic residue detection

Deep eutectic solvents (DESs) have recently emerged as an alternative solvent for nanoparticle synthesis. There have been numerous advancements in the fabrication of silver nanoparticles (Ag NPs), but the potential of DESs in Ag NP synthesis was neither considered nor studied carefully. In this study, we present a novel strategy to fabricate Ag NPs in a DES (Ag NPs-DES). The DES composed of ᴅ-glucose, urea, and glycerol does not contain any anions to precipitate with Ag+ cations. Our Ag NPs-DES sample is used in a surface-enhanced Raman scattering (SERS) sensor. The two analytes for SERS quantitation are nitrofurantoin (NFT) and sulfadiazine (SDZ) whose residues can be traced down to 10-8 M. The highest enhancement factors (EFs) are competitive at 6.29 × 107 and 1.69 × 107 for NFT and SDZ, respectively. Besides, the linearity coefficients are extremely close to 1 in the range of 10-8 to 10-3 M of concentration, and the SERS substrate shows remarkable uniformity along with great selectivity. This powerful SERS performance indicates that DESs have tremendous potential in the synthesis of nanomaterials for biosensor substrate construction.

Experimental and Theoretical Insights into the Intermolecular Interactions in Saturated Systems of Dapsone in Conventional and Deep Eutectic Solvents

Solubility is not only a crucial physicochemical property for laboratory practice but also provides valuable insight into the mechanism of saturated system organization, as a measure of the interplay between various intermolecular interactions. The importance of these data cannot be overstated, particularly when dealing with active pharmaceutical ingredients (APIs), such as dapsone. It is a commonly used anti-inflammatory and antimicrobial agent. However, its low solubility hampers its efficient applications. In this project, deep eutectic solvents (DESs) were used as solubilizing agents for dapsone as an alternative to traditional solvents. DESs were composed of choline chloride and one of six polyols. Additionally, water-DES mixtures were studied as a type of ternary solvents. The solubility of dapsone in these systems was determined spectrophotometrically. This study also analyzed the intermolecular interactions, not only in the studied eutectic systems, but also in a wide range of systems found in the literature, determined using the COSMO-RS framework. The intermolecular interactions were quantified as affinity values, which correspond to the Gibbs free energy of pair formation of dapsone molecules with constituents of regular solvents and choline chloride-based deep eutectic solvents. The patterns of solute-solute, solute-solvent, and solvent-solvent interactions that affect solubility were recognized using Orange data mining software (version 3.36.2). Finally, the computed affinity values were used to provide useful descriptors for machine learning purposes. The impact of intermolecular interactions on dapsone solubility in neat solvents, binary organic solvent mixtures, and deep eutectic solvents was analyzed and highlighted, underscoring the crucial role of dapsone self-association and providing valuable insights into complex solubility phenomena. Also the importance of solvent-solvent diversity was highlighted as a factor determining dapsone solubility. The Non-Linear Support Vector Regression (NuSVR) model, in conjunction with unique molecular descriptors, revealed exceptional predictive accuracy. Overall, this study underscores the potency of computed molecular characteristics and machine learning models in unraveling complex molecular interactions, thereby advancing our understanding of solubility phenomena within the scientific community.

Synergistic Applications of Graphene-Based Materials and Deep Eutectic Solvents in Sustainable Sensing: A Comprehensive Review

The recently explored synergistic combination of graphene-based materials and deep eutectic solvents (DESs) is opening novel and effective avenues for developing sensing devices with optimized features. In more detail, remarkable potential in terms of simplicity, sustainability, and cost-effectiveness of this combination have been demonstrated for sensors, resulting in the creation of hybrid devices with enhanced signal-to-noise ratios, linearities, and selectivity. Therefore, this review aims to provide a comprehensive overview of the currently available scientific literature discussing investigations and applications of sensors that integrate graphene-based materials and deep eutectic solvents, with an outlook for the most promising developments of this approach.

Deep eutectic solvent-based shaking-assisted extraction for determination of bioactive compounds from Norway spruce roots

Polyphenolic compounds play an essential role in plant growth, reproduction, and defense mechanisms against pathogens and environmental stresses. Extracting these compounds is the initial step in assessing phytochemical changes, where the choice of extraction method significantly influences the extracted analytes. However, due to environmental factors, analyzing numerous samples is necessary for statistically significant results, often leading to the use of harmful organic solvents for extraction. Therefore, in this study, a novel DES-based shaking-assisted extraction procedure for the separation of polyphenolic compounds from plant samples followed by LC-ESI-QTOF-MS analysis was developed. The DES was prepared from choline chloride (ChCl) as the hydrogen bond acceptor (HBA) and fructose (Fru) as the hydrogen bond donor (HBD) at various molar ratios with the addition of 30% water to reduce viscosity. Several experimental variables affecting extraction efficiency were studied and optimized using one-variable-at-a-time (OVAT) and confirmed by response surface design (RS). Nearly the same experimental conditions were obtained using both optimization methods and were set as follows: 30 mg of sample, 300 mg of ChCl:Fru 1:2 DES containing 30% w/w of water, 500 rpm shaking speed, 30 min extraction time, 10°C extraction temperature. The results were compared with those obtained using conventional solvents, such as ethanol, methanol and water, whereby the DES-based shaking-assisted extraction method showed a higher efficiency than the classical procedures. The greenness of the developed method was compared with the greenness of existing procedures for the extraction of polyphenolic substances from solid plant samples using the complementary green analytical procedure index (ComplexGAPI) approach, while the results for the developed method were better or comparable to the existing ones. In addition, the practicability of the developed procedure was evaluated by application of the blue applicability grade index (BAGI) metric. The developed procedure was applied to the determination of spruce root samples with satisfactory results and has the potential for use in the analysis of similar plant samples.

Recent Advancements in the Utilization of s-Block Organometallic Reagents in Organic Synthesis with Sustainable Solvents

This mini-review offers a comprehensive overview of the advancements made over the last three years in utilizing highly polar s-block organometallic reagents (specifically, RLi, RNa and RMgX compounds) in organic synthesis run under bench-type reaction conditions. These conditions involve exposure to air/moisture and are carried out at room temperature, with the use of sustainable solvents as reaction media. In the examples provided, the adoption of Deep Eutectic Solvents (DESs) or even water as non-conventional and protic reaction media has not only replicated the traditional chemistry of these organometallic reagents in conventional and toxic volatile organic compounds under Schlenk-type reaction conditions (typically involving low temperatures of -78 °C to 0 °C and a protective atmosphere of N2 or Ar), but has also resulted in higher conversions and selectivities within remarkably short reaction times (measured in s/min). Furthermore, the application of the aforementioned polar organometallics under bench-type reaction conditions (at room temperature/under air) has been extended to other environmentally responsible reaction media, such as more sustainable ethereal solvents (e.g., CPME or 2-MeTHF). Notably, this innovative approach contributes to enhancing the overall sustainability of s-block-metal-mediated organic processes, thereby aligning with several key principles of Green Chemistry.

Meltable Aluminum Molecular Rings with Fluorescence and Nonlinear Optical Properties

Crystal-liquid-glass, which combines the tunable properties of crystalline compounds with the processability of glasses, has emerged as a new class of materials for fabricating bulk-shapable devices in real applications. Inspired by the characteristics of deep eutectic solvent (DES) mixtures involving significant depressions in melting points compared to their neat constituent components, in this study, we designed and synthesized the first examples of meltable aluminum oxo clusters (AlOCs) via lattice doping with DESs at the molecular level. The abundant and strong hydrogen bonding between the aluminum molecular ring, DES components, and lattice solvents is postulated to be the root that affords melting point depressions and, thus, "melting" clusters. We prepared a transparent bubble-free glass film under autogenous pressure using a hot-press method. These cluster-based films exhibited luminescent and nonlinear optical properties similar to those of pristine crystalline compounds. Our study belongs to the interdisciplinary disciplines of chemistry and physics. It not only breaks the limitations of crystalline glass on metal and ligand types but also acts as a general guide for extending the range of meltable crystalline materials.

Stability Increase of Phenolic Acid Decarboxylase by a Combination of Protein and Solvent Engineering Unlocks Applications at Elevated Temperatures

Enzymatic decarboxylation of biobased hydroxycinnamic acids gives access to phenolic styrenes for adhesive production. Phenolic acid decarboxylases are proficient enzymes that have been applied in aqueous systems, organic solvents, biphasic systems, and deep eutectic solvents, which makes stability a key feature. Stabilization of the enzyme would increase the total turnover number and thus reduce the energy consumption and waste accumulation associated with biocatalyst production. In this study, we used ancestral sequence reconstruction to generate thermostable decarboxylases. Investigation of a set of 16 ancestors resulted in the identification of a variant with an unfolding temperature of 78.1 °C and a half-life time of 45 h at 60 °C. Crystal structures were determined for three selected ancestors. Structural attributes were calculated to fit different regression models for predicting the thermal stability of variants that have not yet been experimentally explored. The models rely on hydrophobic clusters, salt bridges, hydrogen bonds, and surface properties and can identify more stable proteins out of a pool of candidates. Further stabilization was achieved by the application of mixtures of natural deep eutectic solvents and buffers. Our approach is a straightforward option for enhancing the industrial application of the decarboxylation process.

Unexpected Energy Applications of Ionic Liquids

Ionic liquids and their various analogues are without doubt the scientific sensation of the last few decades, paving the way to a more sustainable society. Their versatile suite of properties, originating from an almost inconceivably large number of possible cation and anion combinations, allows tuning of the structure to serve a desired purpose. Ionic liquids hence offer a myriad of useful applications from solvents to catalysts, through to lubricants, gas absorbers, and azeotrope breakers. The purpose of this review is to explore the more unexpected of these applications, particularly in the energy space. It guides the reader through the application of ionic liquids and their analogues as i) phase change materials for thermal energy storage, ii) organic ionic plastic crystals, which have been studied as battery electrolytes and in gas separation, iii) key components in the nitrogen reduction reaction for sustainable ammonia generation, iv) as electrolytes in aluminum-ion batteries, and v) in other emerging technologies. It is concluded that there is tremendous scope for further optimizing and tuning of the ionic liquid in its task, subject to sustainability imperatives in line with current global priorities, assisted by artificial intelligence.

Locally Concentrated Deep Eutectic Liquids Electrolytes for Low-Polarization Aluminum Metal Batteries

Low-cost and nontoxic deep eutectic liquid electrolytes (DELEs), such as [AlCl3 ]1.3 [Urea] (AU), are promising for rechargeable non-aqueous aluminum metal batteries (AMBs). However, their high viscosity and sluggish ion transport at room temperature lead to high cell polarization and low specific capacity, limiting their practical application. Herein, non-solvating 1,2-difluorobenzene (dFBn) is proposed as a co-solvent of DELEs using AU as model to construct a locally concentrated deep eutectic liquid electrolyte (LC-DELE). dFBn effectively improves the fluidity and ion transport without affecting the ionic dynamics in the electrolyte. Moreover, dFBn also modifies the solid electrolyte interphase growing on the aluminum metal anodes and reduces the interfacial resistance. As a result, the lifespan of Al/Al cells is improved from 210 to 2000 h, and the cell polarization is reduced from 0.36 to 0.14 V at 1.0 mA cm-2 . The rate performance of Al-graphite cells is greatly improved with a polarization reduction of 0.15 and 0.74 V at 0.1 and 1 A g-1 , respectively. The initial discharge capacity of Al-sulfur cells is improved from 94 to 1640 mAh g-1 . This work provides a feasible solution to the high polarization of AMBs employing DELEs and a new path to high-performance low-cost AMBs.

Designing low toxic deep eutectic solvents for the green recycle of lithium-ion batteries cathodes

The Lithium-ion battery (LIB) is one of the main energy storage equipment. Its cathode material contains Li, Co, and other valuable metals. Therefore, recycling spent LIBs can reduce environmental pollution and resource waste, which is significant for sustainable development. However, traditional metallurgical methods are not environmentally friendly, with high cost and environmental toxicity. Recently, the concept of green chemistry gives rise to environmental and efficient recycling technology, which promotes the transition of recycling solvents from organic solvents to green solvents represented by deep eutectic solvents (DESs). DESs are considered as ideal alternative solvents in extraction processes, attracting great attention due to their low cost, low toxicity, good biodegradability, and high extraction capacity. It is very important to develop the DESs system for LIBs recycling for sustainable development of energy and green economic development of recycling technology. In this work, the applications and research progress of DESs in LIBs recovery are reviewed, and the physicochemical properties such as viscosity, toxicity and regulatory properties are summarized and discussed. In particular, the toxicity data of DESs are collected and analyzed. Finally, the guidance and prospects for future research are put forward, aiming to explore more suitable DESs for recycling valuable metals in batteries.

Eco-Friendly and Efficient Extraction of Polysaccharides from Acanthopanax senticosus by Ultrasound-Assisted Deep Eutectic Solvent

A green extraction method was developed using deep eutectic solvent extraction for the polysaccharide from Acanthopanax senticosus (A. senticosus). Among the eight types of DES prepared, the DES with a ratio of 1:4 L-malic acid to L-proline was found to be a suitable extraction solvent based on the extraction efficiency. The extraction parameters were optimized by Plackett-Burman and response surface methodology (RSM). The best extraction conditions were found for L-malic acid. Under the conditions of an L-malic acid/L-proline ratio of 1:4, ultrasonic power of 240 W, material-liquid ratio of 31.068 g/mL, water content of 32.364%, extraction time of 129.119 min, and extraction temperature of 60 °C, the extraction rate of A. senticosus polysaccharides was 35.452 ± 0.388 mg-g-1. This rate was higher than that of polysaccharides obtained by hot water extraction (13.652 ± 0.09 mg-g-1). The experimental results were best fitted by the quasi-secondary kinetic model when compared to two other kinetic models. Electron microscopic observations showed that DESs were more destructive to plant cells. The polysaccharide extracted from DESs had more monosaccharide components, a lower molecular weight, a higher antioxidant capacity, and superior anti-glycation activity compared to polysaccharides extracted from water (ASPS-PW). This study demonstrates the effectiveness of DESs in obtaining polysaccharides from A. senticosus.

A Review on the Use of Deep Eutectic Solvents in Protection Reactions

Given the recent research on the application of eco-sustainable methods in organic chemistry, we have focused our attention on the derivatization processes for fundamental functional groups in organic chemistry, such as amino, hydroxyl and carbonyl groups. Protection reactions are needed to temporarily block a certain reactive site on a molecule. The use of green solvents in this context has made an excellent contribution to the development of eco-sustainable methods. In recent years, deep eutectic solvents (DESs) have had great success as a new class of green solvents used in various chemical applications, such as extraction or synthetic processes. These solvents are biodegradable and nontoxic. In this framework, a list of relevant works found in the literature is described, considering DESs to be a good alternative to classic toxic solvents in the protection reactions of important functional groups.

Influence of Electrolyte Choice on Zinc Electrodeposition

Zinc electrodeposition serves as a crucial electrochemical process widely employed in various industries, particularly in automotive manufacturing, owing to its cost effectiveness compared to traditional methods. However, traditional zinc electrodeposition using aqueous solutions faces challenges related to toxicity and hydrogen gas generation. Non-aqueous electrolytes such as ionic liquids (ILs) and deep eutectic solvents (DESs) have gained attention, with choline-chloride-based DESs showing promise despite raising environmental concerns. In this study, zinc electrodeposition on mild steel was investigated using three distinct electrolytes: (i) halide-free aqueous solutions, (ii) chloride-based DES, and (iii) halide-free acetate-based organic solutions. The study examined the influence of deposition time on the growth of Zn on mild steel substrates from these electrolytes using physical characterization techniques, including scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results indicate that glycol + acetate-based non-aqueous organic solutions provide an eco-friendly alternative, exhibiting comparable efficiency, enhanced crystalline growth, and promising corrosion resistance. This research contributes valuable insights into the impact of electrolyte choice on zinc electrodeposition, offering a pathway towards more sustainable and efficient processes. Through a comprehensive comparison and analysis of these methods, it advances our understanding of the practical applications of zinc electrodeposition technology.

Combination of a Deep Eutectic Solvent and Macroporous Resin for Green Recovery of Iridoids, Chlorogenic Acid, and Flavonoids from Eucommia ulmoides Leaves

To increase the effectiveness of using typical biomass waste as a resource, iridoids, chlorogenic acid, and flavonoids from the waste biomass of Eucommia ulmoides leaves (EULs) were extracted by deep eutectic solvents (DESs) in conjunction with macroporous resin. To optimize the extract conditions, the experiment of response surface was employed with the single-factor of DES composition molar ratio, liquid-solid ratio, water percentage, extraction temperature, and extraction time. The findings demonstrated that the theoretical simulated extraction yield of chlorogenic acid (CGA), geniposidic acid (GPA), aucubin (AU), geniposide (GP), rutin (RU), and isoquercetin (IQU) were 42.8, 137.2, 156.7, 5.4, 13.5, and 12.8 mg/g, respectively, under optimal conditions (hydrogen bond donor-hydrogen bond acceptor molar ratio of 1.96, liquid-solid ratio of 28.89 mL/g, water percentage of 38.44%, temperature of 317.36 K, and time of 55.59 min). Then, 12 resins were evaluated for their adsorption and desorption capabilities for the target components, and the HPD950 resin was found to operate at its optimum. Additionally, the HPD950 resin demonstrated significant sustainability and considerable potential in the recyclability test. Finally, the hypoglycemic in vitro, hypolipidemic in vitro, immunomodulatory, and anti-inflammatory effects of EUL extract were evaluated, and the correlation analysis of six active components with biological activity and physicochemical characteristics of DESs by heatmap were discussed. The findings of this study can offer a theoretical foundation for the extraction of valuable components by DESs from waste biomass, as well as specific utility benefits for the creation and development of natural products.

Investigating Biomolecules in Deep Eutectic Solvents with Molecular Dynamics Simulations: Current State, Challenges and Future Perspectives

Deep eutectic solvents (DESs) have recently gained increased attention for their potential in biotechnological applications. DESs are binary mixtures often consisting of a hydrogen bond acceptor and a hydrogen bond donor, which allows for tailoring their properties for particular applications. If produced from sustainable resources, they can provide a greener alternative to many traditional organic solvents for usage in various applications (e.g., as reaction environment, crystallization agent, or storage medium). To navigate this large design space, it is crucial to comprehend the behavior of biomolecules (e.g., enzymes, proteins, cofactors, and DNA) in DESs and the impact of their individual components. Molecular dynamics (MD) simulations offer a powerful tool for understanding thermodynamic and transport processes at the atomic level and offer insights into their fundamental phenomena, which may not be accessible through experiments. While the experimental investigation of DESs for various biotechnological applications is well progressed, a thorough investigation of biomolecules in DESs via MD simulations has only gained popularity in recent years. Within this work, we aim to provide an overview of the current state of modeling biomolecules with MD simulations in DESs and discuss future directions with a focus for optimizing the molecular simulations and increasing our fundamental knowledge.

Ultra-Tough and Highly Stretchable Dual-Crosslinked Eutectogel Based on Coordinated and Non-Coordinated Two Types Deep Eutectic Solvent Mixture

Eutectogels are gaining attention in flexible device applications for their superior ionic conductivity, stability, biocompatibility, and cost-effectiveness. However, most existing eutectogels suffer from low strength and toughness. Herein, ultra-tough and highly stretchable polyacrylamide (PAM) eutectogels featuring a dual-crosslinked network comprising chemical cross-linking and physical cross-linking facilitated by metal coordination bonds and hydrogen bonds are developed. This is achieved through a controlled strategy involving polymerization of acrylamide in a coordinated metal salt-type deep eutectic solvent (DES) combined with a non-coordinated choline chloride (ChCl)-type DES mixture. By varying the molar ratio of these two types of DES, exceptional and adjustable mechanical properties of the resulting eutectogel are achieved, including a high tensile strength ranging from 2.9 to 8.2 MPa and elongation at break ranging from 1725 to 747%, at a 70 wt% DES content. Furthermore, the reversible non-covalent crosslinking in these eutectogels enables self-recovery and self-healing capabilities of eutectogels. The prepared eutectogels also exhibit outstanding ionic conductivity (3.56 mS cm-1 ), making them well-suited for use as strain sensors in human motion detection. The toughening strategy is universally effective for creating tough eutectogels using coordinated metal salt-type DES with various metal ions, as well as a diverse range of coordinatable polymers.

Investigation on improvement of enantioseparation based on clindamycin phosphate by chiral deep eutectic solvents in capillary electrophoresis

In this work, the potential synergetic effect between deep eutectic solvents and an antibiotic chiral selector (clindamycin phosphate) for enantioseparation was investigated in capillary electrophoresis. We synthesized a series of deep eutectic solvents with choline chloride as hydrogen bond acceptor and three α-hydroxyl acids (l-lactic acid, l-malic acid, and l-tartaric acid) as hydrogen bond donors. Compared to the single clindamycin phosphate separation system, significantly improved separations of model drugs were observed in several synergetic systems. Compared to deep eutectic solvents with a single hydrogen bond donor, deep eutectic solvents with mixed-type hydrogen bond donors were superior. The influences of several key parameters including the type and proportion of organic modifier, clindamycin phosphate concentrations, deep eutectic solvents concentrations, and buffer pH were investigated in detail. The mechanism of the enhanced separations in deep eutectic solvents systems was investigated by means of electroosmotic flow analysis, nuclear magnetic resonance analysis, and molecular modeling. It was the first time that the synergetic systems between deep eutectic solvents and antibiotic chiral selector were established in capillary electrophoresis, and these deep eutectic solvents were demonstrated to have a good synergetic effect with clindamycin phosphate for enantioseparation.

Natural Deep Eutectic Solvents as Rust Removal Agents from Lithic and Cellulosic Substrates

The peculiar physicochemical features of deep eutectic solvents (DESs), in particular their tunability, make them ideal media for various applications. Despite their ability to solubilize metal oxides, their use as rust removers from valuable substrates has not yet been thoroughly investigated. In this study, we chose three known DESs, consisting of choline chloride and acetic, oxalic or citric acid for evaluating their ability to remove corrosion products from a cellulose-based material as linen fabric and two different lithotypes, as travertine and granite. The artificial staining was achieved by placing a rusty iron grid on their surfaces. The DESs were applied by means of cellulose poultice on the linen fabrics, while on the rusted stone surfaces with a cotton swab. Macro- and microscopic observations, colorimetry and SEM/EDS analysis were employed to ascertain the cleaning effectiveness and the absence of side effects on the samples after treatment. Oxalic acid-based DES was capable of removing rust stains from both stone and cellulose-based samples, while choline chloride/citric acid DES was effective only on stone specimens. The results suggest a new practical application of DESs for the elimination of rust from lithic and cellulosic substrates of precious and artistic value.

Extraction and characterisation of kudzu root residue lignin based on deep eutectic solvents

INTRODUCTION

Lignin has great potential as the most abundant renewable phenolic polymer. Studies have shown that lignin structure varies depending on different sources and different extraction methods. However, there are few studies on lignin in kudzu root residue.

OBJECTIVES

The aim of the study was to explore optimal extraction conditions of Pueraria lobata residue lignin (PLL) with deep eutectic solvents (DESs) and characterise the structure and morphology of PLL.

METHODS

Firstly, the chemical composition of kudzu root residue was determined by the Van-soest method. Then, betaine was used as hydrogen bond acceptor (HBA), nine kinds of common acids and alcohol were selected as hydrogen bond donor (HBD) to synthesise a DES to extract lignin from kudzu root residue. The influence of conditions on the extraction of PLL was explored by a betaine-based DES according to a single-factor experiment, and then the best process of PLL extraction was determined by an orthogonal experiment. Finally, the morphology and structure of PLL were analysed by scanning electron microscope (SEM), thermogravimetric analysis (TGA), gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and NMR.

RESULTS

Cellulose, hemicellulose, lignin, and ash content in kudzu root residue were 41.13%, 16.39%, 25.03%, and 0.41%, respectively. When the DES consisted of betaine and formic acid, the solid-liquid ratio was 1:45, the extraction time was 5.5 h at 160°C, the extraction yield of lignin was 89.29%, and the purity was 83.01%. PLL was composed of interconnected spherical particles with good thermal stability and narrow polydispersity index (PDI) distribution. FTIR and 2D-heteronuclear singular quantum correlation (HSQC) NMR illustrated that PLL was a typical G-type and S-type lignin.

CONCLUSION

This study would fill the gap of research on lignin in kudzu root residue and provide a theoretical reference for the utilisation of lignin in kudzu roots as well as a new thinking for the recycling of kudzu root resources.

Natural deep eutectic solvents-based green extraction of vanillin: optimization, purification, and bioactivity assessment

The sustainable extraction of natural compounds has recently attracted significant attention. The extraction of high-quality natural vanillin in active form is crucial for its efficient use in various industries, but conventional solvents are not suitable for this purpose. The flammability, volatility, and toxicity of organic solvents can harm extraction personnel, and their waste liquid can cause environmental pollution. Natural deep eutectic solvents (NADES) are cost-effective, environmentally friendly, biodegradable, and non-toxic organic alternative to conventional solvents. In this study, 20 different NADES were tested for the sustainable extraction of natural vanillin. Among these, a DES system composed of choline chloride: 1,4-butanediol: lactic acid exhibited the highest extraction rate (15.9 mg/g). Employing response surface methodology (RSM), optimal extraction conditions were determined, yielding a vanillin content 18.5 mg/g with water content of 33.9%, extraction temperature of 64.6°C, extraction time of 32.3 min, and a solid-liquid ratio of 44.9 mg/mL. Subsequently, the optimized NADES system was then assessed for reusability in extracting vanillin from vanilla pods and kraft lignin over three cycles, retaining 43% of its extraction efficiency and demonstrating potential for waste reduction. Purification of vanillin was achieved through chromatography using a non-polar resin SP700, with ethanol as a desorption eluent and a feed solution pH of 4.0, resulting in the highest vanillin purity. HPLC and GC-MS analyses confirmed purity, while antioxidant activity assays (DPPH and ABTS) showcased significant antioxidant activity of the purified vanillin. Moreover, vanillin exhibited notable antimicrobial activity against a panel of food-borne bacteria. This study introduces an environmentally friendly approach to vanillin extraction highlights using NADES, emphasizing the potential for producing high-quality bioactive vanillin with reduced environmental impact. The applicability of NADES systems extends beyond vanillin, offering a versatile method for extracting diverse natural compounds.

A Comprehensive Review on Deep Eutectic Solvents and Its Use to Extract Bioactive Compounds of Pharmaceutical Interest

The extraction of bioactive compounds of pharmaceutical interest from natural sources has been significantly explored in recent decades. However, the extraction techniques used were not very efficient in terms of time and energy consumption; additionally, the solvents used for the extraction were harmful for the environment. To improve the environmental impact of the extractions and at the same time increase the extraction yields, several new extraction techniques were developed. Among the most used ones are ultrasound-assisted extraction and microwave-assisted extraction. These extraction techniques increased the yield and selectivity of the extraction in a smaller amount of time with a decrease in energy consumption. Nevertheless, a high volume of organic solvents was still used for the extraction, causing a subsequent environmental problem. Neoteric solvents appeared as green alternatives to organic solvents. Among the neoteric solvents, deep eutectic solvents were evidenced to be one of the best alternatives to organic solvents due to their intrinsic characteristics. These solvents are considered green solvents because they are made up of natural compounds such as sugars, amino acids, and carboxylic acids having low toxicity and high degradability. In addition, they are simple to prepare, with an atomic economy of 100%, with attractive physicochemical properties. Furthermore, the huge number of compounds that can be used to synthesize these solvents make them very useful in the extraction of bioactive compounds since they can be tailored to be selective towards a specific component or class of components. The main aim of this paper is to give a comprehensive review which describes the main properties, characteristics, and production methods of deep eutectic solvents as well as its application to extract from natural sources bioactive compounds with pharmaceutical interest. Additionally, an overview of the more recent and sustainable extraction techniques is also given.

Recovery of Residual Lead from Automotive Battery Recycling Slag Using Deep Eutectic Solvents

In this study, we address the ecological challenges posed by automotive battery recycling, a process notorious for its environmental impact due to the buildup of hazardous waste like foundry slag. We propose a relatively cheap and safe solution for lead removal and recovery from samples of this type of slag. The analysis of TCLP extracts revealed non-compliance with international regulations, showing lead concentrations of up to 5.4% primarily in the form of anglesite (PbSO4), as detected by XRF/XRD. We employed deep eutectic solvents (DES) as leaching agents known for their biodegradability and safety in hydrometallurgical processing. Five operational variables were systematically evaluated: sample type, solvent, concentration, temperature, and time. Using a solvent composed of choline chloride and glycerin in a 2:1 molar ratio, we achieved 95% lead dissolution from acidic samples at 90 °C, with agitation at 470 rpm, a pulp concentration of 5%, and a 5 h duration. Furthermore, we successfully recovered 55% of the lead in an optimized solution using an electrowinning cell. This research demonstrates the ability of DES to decontaminate slag, enabling compliance with regulations, the recovery of valuable metals, and new possibilities for the remaining material.

Solubility of dapsone in deep eutectic solvents: Experimental analysis, molecular insights and machine learning predictions

BACKGROUND

Dapsone (DAP) is an anti-inflammatory and antimicrobial active pharmaceutical ingredient used to treat, e.g., AIDS-related diseases. However, low solubility is a feature hampering its efficient use.

OBJECTIVES

First, deep eutectic solvents (DES) were used as solubilizing agents for DAP as an alternative to traditional solvents. Second, intermolecular interactions in the systems were described and quantified. Finally, the solubility prediction model, previously created using the machine learning protocol, was extended and improved using new data obtained for eutectic systems.

MATERIAL AND METHODS

New DES were created by blending choline chloride (ChCl) with 6 selected polyols. The solubility of DAP in these solvents was measured spectrophotometrically. The impact of water dilution on the solubility curve was investigated. Experimental research was enriched with theoretical interpretations of intermolecular interactions, identifying the most probable pairs in the systems. Dapsone self-association and its ability to interact with components of the analyzed systems were considered. Thermodynamic characteristics of pairs were utilized as molecular descriptors in the machine learning process, predicting solubility in both traditional organic solvents and the newly designed DES.

RESULTS

The newly formulated solvents demonstrated significantly higher efficiency compared to traditional organic solvents, and a small addition of water increased solubility, indicating its role as a co-solvent. The interpretation of the mechanism of DAP solubility highlighted the competitive nature of self-association and pair formation. Thermodynamic parameters characterizing affinity were instrumental in developing an efficient model for theoretical screening across diverse solvent classes. The study emphasized the necessity of retraining models when introducing new experimental data, as exemplified by enriching the model with data from DES.

CONCLUSIONS

The research showcased the efficacy of developing new DES for enhancing solubility and creating environmentally and pharmaceutically viable systems, using DAP as an example. Molecular interactions proved valuable in understanding solubility mechanisms and formulating predictive models through machine learning processes.

All-Organic Battery Based on Deep Eutectic Solvent and Redox-Active Polymers

Sustainable battery concepts are of great importance for the energy storage demands of the future. Organic batteries based on redox-active polymers are one class of promising storage systems to meet these demands, in particular when combined with environmentally friendly and safe electrolytes. Deep Eutectic Solvents (DESs) represent a class of electrolytes that can be produced from sustainable sources and exhibit in most cases no or only a small environmental impact. Because of their non-flammability, DESs are safe, while providing an electrochemical stability window almost comparable to established battery electrolytes and much broader than typical aqueous electrolytes. Here, we report the first all-organic battery cell based on a DES electrolyte, which in this case is composed of sodium bis(trifluoromethanesulfonyl)imide (NaTFSI) and N-methylacetamide (NMA) alongside the electrode active materials poly(2,2,6,6-tetramethylpiperidin-1-yl-oxyl methacrylate) (PTMA) and crosslinked poly(vinylbenzylviologen) (X-PVBV2+ ). The resulting cell shows two voltage plateaus at 1.07 V and 1.58 V and achieves Coulombic efficiencies of 98 %. Surprisingly, the X-PVBV/X-PVBV+ redox couple turned out to be much more stable in NaTFSI : NMA 1 : 6 than the X-PVBV+ /X-PVBV2+ couple, leading to asymmetric capacity fading during cycling tests.

Dissolution of Metals (Cu, Fe, Pb, and Zn) from Different Metal-Bearing Species (Sulfides, Oxides, and Sulfates) Using Three Deep Eutectic Solvents Based on Choline Chloride

Nowadays, deep eutectic solvents (DESs) are seen as environmentally friendly alternatives with the potential to replace traditional solvents used in hydrometallurgical processes. Although DESs have been successfully applied in the recovery of metals from secondary sources, there is still innovative potential regarding DESs as green leaching agents applied in the recovery of metals from primary sources like polysulfide ores. This study aimed to evaluate the characteristics of DESs as solvents for some of the main metals present in typical polymetallic concentrates, like Cu, Fe, Pb, and Zn. Thus, three DESs based on choline chloride (ChCl) were prepared: 1:2 ChCl-urea (also known as reline), 1:2 ChCl-ethylene glycol (also known as ethaline), and 1:2 ChCl-glycerol (also known as glyceline). Then, dissolution tests at 30 °C were carried out with these DESs and different metal- (Cu, Fe, Pb, and Zn) bearing compounds (sulfates, oxides, and sulfides). According to the dissolution tests, it was found that the solubility of the studied metals (expressed as g of metal per Kg of DES) was dictated by the bearing species, reaching the dissolution of the metals from sulfates with values as high as two orders of magnitude higher than the metal solubility values for metal oxides and sulfides.

as example

INTRODUCTION

Deep eutectic solvents (DESs) are promising extractants with tuneable properties. However, there is a lack of reports about the influence of the nature of the original DES on obtaining the metabolomic profile of a plant.

OBJECTIVE

The aim of this study is to investigate the possibility of obtaining Iris sibirica L. chromatographical profiles with DESs based on various hydrogen bond donors and acceptors as extraction solvents.

METHODOLOGY

DESs were prepared by mixing choline chloride or tetrabutylammonium bromide with various hydrogen bond donors and investigated for the extraction of bioactive substances from biotechnological raw materials of I. sibirica L. The obtained extracts were analysed by HPLC with diode array detector (DAD) and Q-MS.

RESULTS

Chromatographic profiles for I. sibirica L. extracts by eight choline chloride DESs and six tetrabutylammonium DESs have been obtained. It has been found that selective recovery of bioactive substances can be achieved by varying the composition of DESs. Eleven phenolic compounds were identified in I. sibirica L. using HPLC-MS. Phase separation was observed with acetonitrile for four DESs. New flavonoid derivatives have been found in DES extracts compared with methanol extracts.

CONCLUSION

The results showed the possibility of DES usage for extraction without water addition. Selectivity of DESs varies depending on the chemical composition of hydrogen bond donors and acceptors. Choline chloride is a more suitable hydrogen bond acceptor for the flavonoid extraction. Choline chloride-lactic acid (1:1) DES has demonstrated a metabolic profile that was the closest to the methanol one and enhanced the extraction up to 2.6-fold.

Porous Core-membrane Microstructured Nanomaterial Composed of Deep Eutectic Solvents and MOF-808 for CO2 Capture

A series of porous core-membrane microstructured nanomaterials, constructed of a deep eutectic solvent (DES) membrane and porous MOF-808 core via liquid surface tensions and electrostatic interactions, are introduced for carbon dioxide capture with the sorption mechanism coupling diffusion, physisorption, and chemisorption. MOF-808 as the porous core considerably improves the diffusion interactions for DES membranes, hence significantly enhancing the sorption performance of DESs. Although the DES consisted by monoethanolamine and tetrapropylammonium chloride (MEA-TPAC-7) has the highest sorption capacity among all DESs, it is only 4.39 mmol g-1 at 2.4 bar and further attenuates by fastidious diffusion interactions when increasing viscosity or dose. The sorption capacities of DES@MOF-120 are 5.18 mmol g-1 at 3.0 bar and 4.78 mmol g-1 at 2.4 bar without apparent sorption hysteresis in pressure swing sorption, which are substantially improved contrasted to MEA-TPAC-7. The sorption isotherms are reconstructed via Sips models considering surface heterogeneity with regression correlation coefficients over 0.9454 to forecast maximum sorption capacity over 6.33 mmol g-1 .

Enantioselective Catalytic Aldol Reactions in the Presence of Knoevenagel Nucleophiles: A Chemoselective Switch Optimized in Deep Eutectic Solvents Using Mechanochemistry

In the presence of different nucleophilic Knoevenagel competitors, cyclic and acyclic ketones have been shown to undergo highly chemoselective aldol reactions with aldehydes. In doing so, the substrate breadth for this emerging methodology has been significantly broadened. The method is also no longer beholden to proline-based catalyst templates, e.g., commercially available O-t-Bu-L-threonine is advantageous for acyclic ketones. The key insight was to exploit water-based mediums under conventional (in-water) and non-conventional (deep eutectic solvents) conditions. With few exceptions, high aldol-to-Knoevenagel chemoselectivity (>10:1) and good product profiles (yield, dr, and ee) were observed, but only in DESs (deep eutectic solvents) in conjunction with ball milling did short reaction times occur.

From Hemp Waste to Bioactive Nanofiber Composites: Deep Eutectic Solvents and Electrospinning in Upcycling Endeavors

Natural fibers have attracted increasing interest as an alternative to produce environmentally friendly and sustainable materials. Particularly, hemp fibers have been widely used in various industrial applications due to their extremely unique properties. However, hemp can generate a large amount of agro-waste, and it results in an attractive source of biopolymers for the development of low-cost materials as an alternative to the raw materials and conventional petroleum-based plastics. In addition, deep eutectic solvents (DESs), a new type of truly green solvents, have been shown to remove gums, lignin, and other non-cellulosic components from hemp fibers. Reusing these components dissolved into the DESs to fabricate new materials directly by electrospinning is a very attractive but still unexplored endeavor. Thus, this innovative research to venture new upcycling pathways is focused on the fabrication of composite nanofibers by electrospinning of a gel-based blend of Poly(vinyl alcohol) (PVA) and hemp agro-waste (HW) dissolved into choline chloride (ChCl):Glycerol (1:2) and ChCl:Urea (1:2) DES mixtures. The results obtained revealed that the produced nanofibers displayed uniform appearance with diameters ranging from 257.7 ± 65.6 nm to 380.8 ± 134.0 nm. In addition, the mechanical properties of the electrospun composite nanofibers produced from the gel-based blends of HW dissolved in DESs and PVA (HW-DESs_PVA) were found to be superior, resulting in an enhanced tensile strength and Young's modulus. Furthermore, the incorporation of HW into the nanofibers was able to provide bioactive antioxidant and antibacterial properties. Overall, this study demonstrated a promising, more sustainable, and eco-friendly way to produce electrospun composite nanofibers using HW in a circular economy perspective.

Eco-Friendly Method for Wood Aerogel Preparation with Efficient Catalytic Reduction of 4-Nitrophenol

The advancement of science and technology and the growth of industry have led to an escalating discharge of domestic sewage and industrial wastewater containing dyes. This surge in volume not only incurs higher costs but also exacerbates environmental burdens. However, the benefits of green and reusable catalytic reduction materials within dye processes are still uncertain. Herein, this study utilized the eco-friendly deep eutectic solvent method (DESM) and the chlorite-alkali method (CAM) to prepare a cellulose-composed wood aerogel derived from natural wood for 4-nitrophenol (4-NP) reduction. The life cycle assessment of wood aerogel preparative process showed that the wood aerogel prepared by the one-step DESM method had fewer environmental impacts. The CAM method was used innovatively to make uniform the chemical functional groups of different wood species and various wood maturities. Subsequently, palladium nanoparticles (Pd NPs) were anchored in the skeleton structure of the wood aerogel with the native chemical groups used as a reducing agent to replace external reducing agents, which reduced secondary pollution and prevented the agglomeration of nanoparticles. Results showed that the catalytic reduction efficiency of 4-NP can reach 99.8%, which shows promises for applications in wastewater treatment containing dyes. Moreover, investigation of the advantages of preparation methods of wood aerogel has important implications for helping researchers and producers choose suitable preparation strategies according to demand.

Biocompatible, Antibacterial, and Stable Deep Eutectic Solvent-Based Ionic Gel Multimodal Sensors for Healthcare Applications

In this study, we investigated a novel approach to fabricate multifunctional ionic gel sensors by using deep eutectic solvents (DESs) as replacements for water. When two distinct DESs were combined, customizable mechanical and conductive properties were created, resulting in improved performance compared with traditional hydrogel-based strain sensors. DES ionic gels possess superior mechanical properties, transparency, biocompatibility, and antimicrobial properties, making them suitable for a wide range of applications such as flexible electronics, soft robotics, and healthcare. We conducted a comprehensive evaluation of the DES ionic gels, evaluating their performance under extreme temperature conditions (-70 to 80 °C), impressive optical transparency (94%), and biocompatibility. Furthermore, a series of tests were conducted to evaluate the antibacterial performance (Escherichia coli) of the DES ionic gels. Their wide strain (1-400%) and temperature (15-50 °C)-sensing ranges demonstrate the versatility and adaptability of DES ionic gels for diverse sensing requirements. The resulting DES ionic gels were successfully applied in human activity and vital sign monitoring, demonstrating their potential for biointegrated sensing devices and healthcare applications. This study offers valuable insights into the development and optimization of hydrogel sensors, particularly for applications that require environmental stability, biocompatibility, and antibacterial performance, thereby paving the way for future advancements in this field.

Polysaccharides from Radix Peucedani: Extraction, Structural Characterization and Antioxidant Activity

In this study, an ultrasound-assisted green extraction method was applied for the extraction of polysaccharides from Radix Peucedani based on deep eutectic solvents (DESs), and the result showed that a DES system composed of betaine and 1,2-propylene glycol with a molar ratio of 1:2 possessed the optimal extraction efficiency for polysaccharides. Single-factor and Box-Behnken designs were used to determine the optimum extraction conditions for the maximum yields of polysaccharides from Radix Peucedani by using DESs. The maximum yields of polysaccharides attained 11.372% within a DES water content of 19%, an extraction time of 36 min, an extraction temperature of 54 °C, a solid-liquid ratio of 1:30 and an ultrasonic irradiation power of 420 W. The physicochemical properties of polysaccharides were analyzed using ICS and FT-IR, and the structure morphology was observed by SEM. The polysaccharides extracted from Radix Peucedani exhibited general antioxidant activities in vitro including DPPH, Hydroxyl and ABTS+ radical-scavenging activity. The antioxidant mechanism of Radix Peucedani polysaccharides was investigated using network pharmacology and molecular docking methods. The result showed that the high binding activity of glucose and IL1B, galactose and CASP3 was recognized as a potential mechanism for the antioxidant effects of Radix Peucedani polysaccharides.

Enhanced Dynamics and Charge Transport at the Eutectic Point: A New Paradigm for the Use of Deep Eutectic Solvent Systems

Deep eutectic solvents (DESs) are a class of versatile solvents with promise for a wide range of applications, from separation processes to electrochemical energy storage technologies. A fundamental understanding of the correlation among the structure, thermodynamics, and dynamics of these materials necessary for targeted rational design for specific applications is still nascent. Here, we employ differential scanning calorimetry (DSC), broadband dielectric spectroscopy (BDS), and femtosecond transient absorption spectroscopy (fs-TAS) to investigate the correlation among thermodynamics, dynamics, and charge transport in mixtures comprising a wide range of compositions of choline chloride (ChCl) and ethylene glycol (EG). Detailed analyses reveal that (i) the eutectic composition of this prototypical DES occurs in the 15-20 mol % ChCl in the EG range rather than the previously assumed 33 mol %, and (ii) both rotational dynamics and charge transport at the eutectic composition are enhanced in this composition range. These findings highlight the fundamental interplay between thermodynamics and dynamics in determining the properties of DESs that are relevant to many applications.

In Situ Encapsulation of Cytochrome c within Covalent Organic Frames Using Deep Eutectic Solvents under Ambient Conditions

In situ integration of enzymes with covalent organic frameworks (COFs) to form hybrid biocatalysts is both significant and challenging. In this study, we present an innovative strategy employing deep eutectic solvents (DESs) to synergistically synthesize COFs and shield cytochrome c (Cyt c). By utilizing DESs as reaction solvents in combination with water, we successfully achieved rapid and in situ encapsulation of Cyt c within COFs (specifically COF-TAPT-TFB) under ambient conditions. The resulting Cyt c@COF-TAPT-TFB composite demonstrates a remarkable preservation of enzymatic activity. This encapsulation strategy also imparts exceptional resistance to organic solvents and exhibits impressive recycling stability. Additionally, the enhanced catalytic efficiency of Cyt c@COF-TAPT-TFB in a photoenzymatic cascade reaction is also showcased.

Ternary Deep Eutectic Solvents System of Colchicine, 4-Hydroxyacetophenone, and Protocatechuic Acid and Characterization of Transdermal Enhancement Mechanism

This study aimed to prepare colchicine (CO), 4-hydroxyacetophenone (HA), and protocatechuic acid (CA) contained in transdermal rubber plasters into a more releasable and acrylate pressure-sensitive adhesive (PSA) to optimize traditional Touguling rubber plasters (TOU) with enhanced transdermal permeability by using deep eutectic solvents (DES) technology. We compared the difference in the release behavior of CO between rubber plaster and PSA, determined the composition of the patch through pharmacodynamic experiments, explored the transdermal behavior of the three components, optimized the patch formula factors, and improved the penetration of CO through the skin. We also focused on elucidating the interactions among the three components of DES and the intricate relationship between DES and the skin. The melting point of DES was determined using DSC, while FTIR, 13C NMR, and ATR-FTIR were used to explore the intricate molecular mechanisms underlying the formation of DES, as well as its enhancement of skin permeability. The results of this investigation confirmed the successful formation of DES, marked by a discernible melting point at 27.33°C. The optimized patch, formulated with a molar ratio of 1:1:1 for CO, HA, and CA, significantly enhanced skin permeability, with the measured skin permeation quantities being 32.26 ± 2.98 µg/cm2, 117.67 ± 7.73 µg/cm2, and 56.79 ± 1.30 µg/cm2 respectively. Remarkably, the optimized patch also demonstrated similar analgesic and anti-inflammatory effects compared to commercial diclofenac diethylamide patches in different pharmacodynamics studies. The formation of DES altered drug compatibility with skin lipids and increased retention, driven by the interaction among the three component molecules through hydrogen bonding, effectively shielding the skin-binding sites and enhancing component permeation. In summary, the study demonstrated that optimized DES patches can concurrently enhance the penetration of CO, HA, and CA, thereby providing a promising approach for the development of DES in transdermal drug delivery systems. The findings also shed light on the molecular mechanisms underlying the transdermal behavior of DES and offer insights for developing more effective traditional Chinese medicine transdermal drug delivery systems.

Lysozyme stability in various deep eutectic solvents using molecular dynamics simulations

The ability of neat deep eutectic solvents (DESs) to influence protein structure and function has gained considerable interest due to the unstable nature of enzymes or therapeutic proteins, which are often exposed to thermal, chemical, or mechanical stresses when handled at an industrial scale. In this study, we simulated a model globular protein, lysozyme, in water and six choline chloride-based DES using molecular dynamics simulations, to investigate the structural changes in various solvent environments, giving insights into the overall stability of lysozyme. Root mean square deviation (RMSD) and root mean square fluctuations (RMSF) of the C-α backbone indicated that most DESs induced a less flexible and rigid lysozyme structure compared to water. The radius of gyration and end-to-end distance calculations pointed towards higher structural compactness in reline and levuline, while the structure of lysozyme considerably expanded in oxaline. Protein-solvent interactions were further analysed by hydrogen bonding interactions and radial distribution functions (RDF), which indicated a higher degree of lysozyme-hydrogen bond donor (HBD) interactions compared to lysozyme-choline hydrogen bonding. Surface area analysis revealed an overall % increase in total positive, negative, donor, and acceptor surface areas in malicine and oxaline compared to water and other DESs, indicating the exposure of a larger number of residues to interactions with the solvent. Reline, levuline, and polyol-based DESs comparatively stabilized lysozyme, even though changes in the secondary/tertiary structures were observed.Communicated by Ramaswamy H. Sarma.

Deep Eutectic Solvent Coated Cerium Oxide Nanoparticles Based Polysulfone Membrane to Mitigate Environmental Toxicology

In this study, ceria nanoparticles (NPs) and deep eutectic solvent (DES) were synthesized, and the ceria-NP's surfaces were modified by DES to form DES-ceria NP filler to develop mixed matrix membranes (MMMs). For the sake of interface engineering, MMMs of 2%, 4%, 6% and 8% filler loadings were fabricated using solution casting technique. The characterizations of SEM, FTIR and TGA of synthesized membranes were performed. SEM represented the surface and cross-sectional morphology of membranes, which indicated that the filler is uniformly dispersed in the polysulfone. FTIR was used to analyze the interaction between the filler and support, which showed there was no reaction between the polymer and DES-ceria NPs as all the peaks were consistent, and TGA provided the variation in the membrane materials with respect to temperature, which categorized all of the membranes as very stable and showed that the trend of stability increases with respect to DES-ceria NPs filler loading. For the evaluation of efficiency of the MMMs, the gas permeation was tested. The permeability of CO2 was improved in comparison with the pristine Polysulfone (PSF) membrane and enhanced selectivities of 35.43 (αCO2/CH4) and 39.3 (αCO2/N2) were found. Hence, the DES-ceria NP-based MMMs proved useful in mitigating CO2 from a gaseous mixture.

Factors Affecting the Extraction of (Poly)Phenols from Natural Resources Using Deep Eutectic Solvents Combined with Ultrasound-Assisted Extraction

Replacing conventional solvents with deep eutectic solvents (DES) has shown promising effects on the extraction yield of (poly)phenols. DES can be combined with ultrasound-assisted extraction (UAE) to further increase the extraction efficiency of (poly)phenols from natural resources compared to conventional methods. This review discusses the factors associated with DES (composition, solvent-to-sample ratio, extraction duration, and temperature) and UAE (ultrasound frequency, power, intensity, and duty cycle) methods that influence the extraction of (poly)phenols and informs future improvements required in the optimization of the extraction process. For the optimum (poly)phenol extraction from natural resources, the following parameters shall be considered: ultrasound frequency should be in the range of 20-50 kHz, ultrasound intensity in the range of 60-120 W/cm2, ultrasound duty cycle in the range of 40-80%, ultrasound duration for 10-30 minutes, and ultrasound temperature for 25-50 °C. Among the reported DES systems, choline chloride with glycerol or lactic acid, with a solvent-to-sample mass ratio of 10-30:1 shown to be effective. The solvent composition and solvent-to-sample mass ratio should be selected according to the target compound and the source material. However, the high viscosity of DES is among the major limitations. Optimizing these factors can help to increase the yield of extracted (poly)phenols and their applications.

FeIII -Based Eutectic Mixtures as Multi-task and Reusable Reaction Media for Efficient and Selective Conversion of Alkynes into Carbonyl Compounds

An efficient, simple and general protocol for the selective hydration of terminal alkynes into the corresponding methyl ketones has been developed by using a cheap, easy-to-synthesise and sustainable FeIII -based eutectic mixture [FeCl3  ⋅ 6H2 O/Gly (3 : 1)] as both promoter and solvent for the hydration reaction, working: i) under mild (45 °C) and bench-type reaction conditions (air); and ii) in the absence of ligands, co-catalysts, co-solvents or toxic, non-abundant and expensive noble transition metals (Au, Ru, Pd). When the final methyl ketones are solid/insoluble in the eutectic mixture, the hydration reaction takes place in 30 min, and the obtained methyl ketones can be isolated by simply decanting the liquid FeIII -DES, allowing the direct isolation of the desired ketones without VOC solvents. By using this straightforward and simple isolation protocol, we have been able to recycle the FeIII -based eutectic mixture system up to eight consecutive times. Furthermore, the FeIII -eutectic mixture is able to promote the selective and efficient formal oxidation of internal alkynes into 1,2-diketones, with the possibility of recycling this system up to three consecutive times. Preliminary investigations into a possible mechanism for the oxidation of the internal alkynes seem to indicate that it proceeds through the formation of the corresponding methyl ketones and α-chloroketones.

Deep Eutectic Solvents Based on Carboxylic Acids and Glycerol or Propylene Glycol as Green Media for Extraction of Bioactive Substances from Chamaenerion angustifolium (L.) Scop

Chamaenerion angustifolium (L.) Scop. is one of the promising sources of biologically active compounds and a valuable industrial crop. Recently, green extraction methods have become more topical. One of them is the application of deep eutectic solvents (DESs). The aim of this work was the synthesis and characterization of DES consisting of glycerin or propylene glycol with malonic, malic, or citric acids, evaluation of their effectiveness for extracting useful substances from C. angustifolium during ultrasonic extraction, description of kinetics, and optimization of extraction conditions. DESs were obtained and characterized with FTIR. Their effectiveness in the process of ultrasound-assisted extraction of biologically active substances from C. angustifolium was estimated. Kinetic parameters describing the dependence of the total phenolic, flavonoids, and antioxidant content, free radical scavenging of DPPH, and concentration of flavonoid aglycons (myricetin, quercetin, and kaempferol) via time in the range of 5-60 min at 45 °C are obtained. Extraction conditions were optimized with the Box-Behnken design of experiment. The results of this work make it possible to expand the scope of DES applications and serve the development of C. angustifolium processing methods.

Synthesis of Imidazole-Based Deep Eutectic Solvents as Solid Lubricants: Lubricated State Transition

The controllable character of the melting point of deep eutectic solvents (DESs) makes it easy to realize lubricated state transitions and produce excellent lubricating properties during friction. In this work, a series of novel imidazole-based DESs were synthesized to present a room-temperature solid state by shifting its eutectic point. Tribological test results show that the wear volume of these DESs decreases as the alkyl chains of the hydrogen bond donors increase. A proper deviation of the eutectic point in DESs produces stable lubricating properties. The present work provides a novel and simple method to prepare solid lubricants and enriches the use of DESs as lubricants. Simultaneously, the method expected to replace the use of conventional cutting fluids.

Water Induced Alterations in Self-Assembly of a Bio-Surfactant in Deep Eutectic Solvent for Enhanced Enzyme Activity

Deep eutectic solvents (DESs) meet important requirements for green solvent technology, including non-toxicity, biodegradability, sustainability, and affordability. Despite possessing low cohesive energy density than water, DESs have been found to support the self-assembly of amphiphiles. It is very much pertinent to examine the effect of water on self-assembly of surfactants in DESs as the presence of water alters the inherent structure of DES, which is expected to affect the characteristic properties of self-assembly. Following this, we have investigated the self-assembly of amino-acid based surfactant, Sodium N-lauroyl sarcosinate (SLS), in DES-water mixtures (10, 30 and 50 w/w% of water) and explored the catalytic activity of Cytochrome-c (Cyt-c) in the formed colloidal systems. Investigations using surface tension, fluorescence, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC) have shown that DES-water mixtures promote the aggregation of SLS, resulting in the lower critical aggregation concentration (cac ∼1.5-6-fold) of the surfactant as compared to water. The nanoclustering of DES at low water content and it's complete de-structuring at high water content affects the self-assembly in a contrasting manner governed by different set of interactions. Further, Cyt-c dispersed in DES-water colloidal solutions demonstrated 5-fold higher peroxidase activity than that observed in phosphate buffer.

Impedimetric DNA Sensors for Epirubicin Detection Based on Polythionine Films Electropolymerized from Deep Eutectic Solvent

An electrochemically active polymer, polythionine (PTN), was synthesized in natural deep eutectic solvent (NADES) via multiple potential scans and characterized using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). NADES consists of citric acid monohydrate, glucose, and water mixed in the molar ratio of 1:1:6. Electrodeposited PTN film was then applied for the electrostatic accumulation of DNA from salmon sperm and used for the sensitive detection of the anticancer drug epirubicin. Its reaction with DNA resulted in regular changes in the EIS parameters that made it possible to determine 1.0-100 µM of epirubicin with the limit of detection (LOD) of 0.3 µM. The DNA sensor developed was successfully applied for the detection of epirubicin in spiked samples of artificial and natural urine and saliva, with recovery ranging from 90 to 109%. The protocol of the DNA sensor assembling utilized only one drop of reactants and was performed with a minimal number of steps. Together with a simple measurement protocol requiring 100 µL of the sample, this offers good opportunities for the further use of the DNA sensor in monitoring the drug level in biological samples, which is necessary in oncology treatment and for the pharmacokinetics studies of new antitumor drugs.

Metal-organic framework functionalized with deep eutectic solvent for solid-phase extraction of Rhodamine 6G in water and cosmetic products

An NH2 -MIL-53(Al)-DES(ChCl-Urea) nanocomposite was synthesized for extraction and determination of Rhodamine (Rh) 6G from environmental and cosmetic samples. The deep eutectic solvent (DES) was prepared by mixing choline chloride and urea in a mole ratio of 1:2. NH2 -MIL-53(Al)-DES(ChCl-Urea) nanocomposite was synthesized using the impregnation method at a ratio of 60:40 (w/w). The optimum conditions were determined after NH2 -MIL-53(Al)-DES(ChCl-Urea) characterization was performed. The optimum conditions were determined as pH 8, adsorbent amount of 15 mg, total adsorption-desorption time of 6 min, and enrichment factor of 20. The recovery values of the solid-phase extraction method for water and cosmetic samples under optimum conditions were between 95% and 106%. NH2 -MIL-53(Al)-DES(ChCl-Urea) nanocomposite was an economically advantageous adsorbent because of its reusability of 15 times. All analyses were performed using the ultraviolet-visible spectrophotometer. The linear range, limit of detection, and limit of quantification of the method were 100-1000, 9.80, and 32.68 μg/L, respectively. The obtained results showed that the synthesized nanocomposite is a suitable adsorbent for the determination of Rh 6G in water and cosmetic samples. The real sample applications were verified with the high-performance liquid chromatography system.

Green Extraction of Polyphenols via Deep Eutectic Solvents and Assisted Technologies from Agri-Food By-Products

Polyphenols are the largest group of phytochemicals with important biological properties. Their presence in conveniently available low-cost sources, such as agri-food by-products, has gained considerable attention in their recovery and further exploitation. Retrieving polyphenols in a green and sustainable way is crucial. Recently, deep eutectic solvents (DESs) have been identified as a safe and environmentally benign medium capable of extracting polyphenols efficiently. This review encompasses the current knowledge and applications of DESs and assisted technologies to extract polyphenols from agri-food by-products. Particular attention has been paid to fundamental mechanisms and potential applications in the food, cosmetic, and pharmaceutical industries. In this way, DESs and DESs-assisted with advanced techniques offer promising opportunities to recover polyphenols from agri-food by-products efficiently, contributing to a circular and sustainable economy.

Deep Eutectic Solvents Based on L-Arginine and 2-Hydroxypropyl-β-Cyclodextrin for Drug Carrier and Penetration Enhancement

By selecting L-arginine as the hydrogen bond acceptor (HBA) and 2-hydroxypropyl-β-cyclodextrin (2HPβCD) as the hydrogen bond donor (HBD), deep eutectic solvents (DESs) with various water content were prepared at the 4:1 mass ratio of L-arginine to 2HPβCD with 40 to 60% of water, and were studied for its application in transdermal drug delivery system (TDDS). The hydrogen bond networks and internal chemistry structures of the DESs were measured by attenuated total reflection Fourier transform infrared (ATR-FTIR) and 1H-nuclear magnetic resonance spectroscopy (1H-NMR), which demonstrated the successful synthesis of DESs. The viscosity of DES was decreased from 10,324.9 to 3219.6 mPa s, while glass transition temperature (Tg) of the DESs was increased from - 60.8 to - 51.4 °C, as the added water was increased from 45 to 60%. The solubility of ibuprofen, norfloxacin, and nateglinide in DES with 45% of water were increased by 79.3, 44.1, and 3.2 times higher than that in water, respectively. The vitro study of transdermal absorption of lidocaine in DESs showed that the cumulative amounts of lidocaine reached 252.4 µg/cm2, 226.1 µg/cm2, and 286.1 µg/cm2 at 8 h for DESs with 45%, 50%, and 60% of water, respectively. The permeation mechanism of DES with lower content of water (45%) was mainly by changing the fluidization of lipids, while changing the secondary structure of keratin in stratum corneum (SC) at higher water content (50% and 60%). These nonirritant and viscous fluid like DESs with good drug solubility and permeation enhancing effects have broad application prospect in the field of drug solubilization and transdermal drug delivery system.

Extraction of Functional Compounds from Tarragon (Artemisia dracunculus L.) by Deep Eutectic Solvents at Different Properties

In this study, it was aimed to examine the capacity of deep eutectic solvents (DESs) with different contents to extract bioactive compounds from tarragon (Artemisia dracunculus L.) plant. For this reason, the total phenolic-flavonoid content, total proanthocyanidin content and antioxidant/antimicrobial activities of the prepared DES extracts were investigated, as well as the individual phenolic and individual amino acid profiles. According to the results, DES10 had the highest efficiency in terms of its capacity to extract individual phenolics (approximately 59 mg/100 g) and individual amino acids (approximately 2500 mg/kg), and also gave a higher yield compared to ethanol (approximately 44 mg/100 g for individual phenolics and about 19810 mg/kg for individual amino acids) and methanol (approximately 58 mg/100 g for individual phenolics and approximately 21430 mg/kg for individual amino acids). However, the total phenolic content, total flavonoid content and antioxidant activity values of DES extracts were determined between 59.09-77.50 mg GAE/100 g, 28.68-45.55 mg GAE/100 g and 42.96-146.86 mg TE/100 g, respectively. Therefore, it can be recommended to use these green solvents, which are known as environmentally friendly, as an alternative to organic solvents in the process of preparing extracts of this important medicinal plant in different areas.

Deep eutectic solvent assisted recovery of high molecular weight levan from an isolated Neobacillus pocheonensis BPSCM4

The present study demonstrates the usage of deep eutectic solvent to recover microbial levan from the clarified fermented broth. The classic ethanol precipitation method for levan recovery is expensive because ethanol can be utilized as a biofuel. Production of ethanol consumes more energy and is not easily recycled. As a result, the current work concentrates on using environmentally friendly solvents for levan recovery. Deep Eutectic Solvents (DES) are greener and can replace ethanol from the microbial polysaccharides precipitation. Thus the proposed approach is environment friendly, technically feasible, reliable and economically viable. The levan was produced from a microbial isolate of aged sugarcane molasses, recovered using traditional ethanol and proposed DES (Choline Chloride and Ethylene Glycol) assisted precipitation. The levan-producing strain was characterized and identified as Neobacillus pocheonensis BPSCM4. The DES-precipitated levan has a high molecular weight of levan, 1.54 × 106 KDa, compared with the ethanol-precipitated levan, 4.246 KDa. The high molecular weight of DES-precipitated levan is due to the low viscosity and hydrogen interaction of ChCl:EG with the levan present in the fermented broth. Further, the optimization enhanced the levan yield to 32.56 g/L when the sucrose concentration was 250 g/L.

A ternary eutectic solvent for cellulose nanocrystal production: exploring the recyclability and pre-pilot scale-up

Deep eutectic solvents (DES) formed using choline chloride (ChCl), p-toluenesulfonic acid (pTSA) of stoichiometry ChCl: pTSA (1:1) and (1:2), and its ternary eutectic mixtures with phosphoric acid (PA) 85% as an additive (ChCl: pTSA: PA) were evaluated for cellulose nanocrystal (CNC) isolation. Initially, the hydrolytic efficiency to produce CNC of each DES was compared before and after adding phosphoric acid by Hammett acidity parameters and the Gutmann acceptor number. Moreover, different DES molar ratios and reaction time were studied at 80°C for CNC optimization. The nanomaterial characteristics were analyzed by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). The ternary eutectic mixture ChCl: pTSA: PA molar ratio (1:1:1.35) was chosen as a suitable recyclable ternary system at the laboratory scale. A CNC yield of about 80% was obtained from the hydrolysis of commercial cellulose in five cycles of recovery, but it dropped to 35% in pre-pilot scaling. However, no variation in the average size of the resulting CNC was observed (132 ± 50 nm x 23 ± 4 nm), which presented high thermal stability (Tmax 362°C) and high crystallinity of about 80% after 3 h of reaction time.

Deep Eutectic Solvents Formed by Glycerol and Xylitol, Fructose and Sorbitol: Effect of the Different Sugars in Their Physicochemical Properties

The search for new eutectic solvents for different applications (extraction, drug formulation, chemical reactions, etc.) is booming thanks to their high solubility capacity and low toxicity. However, it is necessary to carry out a comprehensive physicochemical characterization of these mixtures to understand the molecular behavior at different experimental conditions. In this study, three deep eutectic solvents (DESs) formed by glycerol and xylitol, fructose and sorbitol and water in the molar ratio 1:2:3 were prepared and several physicochemical properties (refractive index, density, surface tension, viscosity, speed of sound, isobaric heat capacity and isentropic compressibility) were measured and analyzed in the 278.15-338.15 K temperature range. The results indicate a linear dependence with temperature for the following properties: surface tension, refractive index, density and isobaric molar heat capacity while viscosity values have been fitted to the Vogel-Fulcher-Tammann equation.