Electrochemical characterisation and oxygen evolution at a heavily boron doped diamond electrode

Base-metal oxide semiconductor electrodes for PPCP degradation: Ti-doped α-Fe2O3 for sulfosalicylic acid oxidation as an example

Sulfosalicylic acid is a typical pharmaceutical and personal care product with high toxicity, environmental persistence, and low biodegradability. Electrochemical oxidation has been demonstrated to be a promising way for hazardous organics treatment, but it is severely limited by the high cost and resource shortage of electrode materials. Base-metal oxide semiconductor anodes have the merits of low cost, diversity, and tunable energy levels for charge transfer, and thus may be alternatives to the electrodes for wastewater treatment. Herein, we found that Ti-doped α-Fe₂O₃, as an example, could be efficient for sulfosalicylic acid oxidation, reaching comparable faraday efficiency of sulfosalicylic acid to that of the boron-doped diamond electrode. Ti-doped electrodes exhibited both higher removal rates and current efficiency compared to the undoped. This could be mainly ascribed to the enhanced charge transfer rate constant. Kinetic analysis shows that the apparent reaction order, in terms of sulfosalicylic acid in bulk solution, depended on applied potential and pollutant concentration. Mechanism study shows that the oxidation of sulfosalicylic acid was mainly through indirect pathway. Moreover, the oxidation products were determined and the oxidation mechanism was proposed. This study may open a door to employ base-metal oxide semiconductor anodes for the efficient treatment of organic wastewater.

A review on disinfection methods for inactivation of waterborne viruses

Water contamination is a global health problem, and the need for safe water is ever-growing due to the public health implications of unsafe water. Contaminated water could contain pathogenic bacteria, protozoa, and viruses that are implicated in several debilitating human diseases. The prevalence and survival of waterborne viruses differ from bacteria and other waterborne microorganisms. In addition, viruses are responsible for more severe waterborne diseases such as gastroenteritis, myocarditis, and encephalitis among others, hence the need for dedicated attention to viral inactivation. Disinfection is vital to water treatment because it removes pathogens, including viruses. The commonly used methods and techniques of disinfection for viral inactivation in water comprise physical disinfection such as membrane filtration, ultraviolet (UV) irradiation, and conventional chemical processes such as chlorine, monochloramine, chlorine dioxide, and ozone among others. However, the production of disinfection by-products (DBPs) that accompanies chemical methods of disinfection is an issue of great concern due to the increase in the risks of harm to humans, for example, the development of cancer of the bladder and adverse reproductive outcomes. Therefore, this review examines the conventional disinfection approaches alongside emerging disinfection technologies, such as photocatalytic disinfection, cavitation, and electrochemical disinfection. Moreover, the merits, limitations, and log reduction values (LRVs) of the different disinfection methods discussed were compared concerning virus removal efficiency. Future research needs to merge single disinfection techniques into one to achieve improved viral disinfection, and the development of medicinal plant-based materials as disinfectants due to their antimicrobial and safety benefits to avoid toxicity is also highlighted.

Carbonate-Induced Electrosynthesis of Hydrogen Peroxide via Two-Electron Water Oxidation

Electrochemical synthesis of hydrogen peroxide (H₂ O₂ ), via the two-electron water oxidation reaction (2e^- WOR), is an attractive method for the sustainable production of valuable chemicals in place of oxygen during water electrolysis. While the majority of 2e^- WOR studies have focussed on electrocatalyst design, little research has been carried out on the selection of the supporting electrolyte. In this work, we investigate the impact of potassium carbonate (K₂ CO₃ ) electrolytes, and their key properties, on H₂ O₂ production. We found that at electrolyte pH values (>9.5) where the carbonate anion (CO₃ ^2- ) was prevalent in the mixture, a 26.5 % increase in the Faraday efficiency (%FE) for H₂ O₂ production was achieved, compared to bicarbonate (HCO₃ ^- ) dominant solutions. Utilising boron-doped diamond (BDD) in highly concentrated K₂ CO₃ solutions, current densities of up to 511 mA cm^-2 (in 4 m) and %FEs of 91.5 % (in 5 m) could be attained. The results presented in this work highlight the influence of CO₃ ^2- on electrochemical H₂ O₂ generation via the 2e^- WOR and provide novel pathways to produce desirable commodities at the anode during electrochemical water splitting.

Photons or Electrons? A Critical Comparison of Electrochemistry and Photoredox Catalysis for Organic Synthesis

Redox processes are at the heart of synthetic methods that rely on either electrochemistry or photoredox catalysis, but how do electrochemistry and photoredox catalysis compare? Both approaches provide access to high energy intermediates (e.g., radicals) that enable bond formations not constrained by the rules of ionic or 2 electron (e) mechanisms. Instead, they enable 1e mechanisms capable of bypassing electronic or steric limitations and protecting group requirements, thus enabling synthetic chemists to disconnect molecules in new and different ways. However, while providing access to similar intermediates, electrochemistry and photoredox catalysis differ in several physical chemistry principles. Understanding those differences can be key to designing new transformations and forging new bond disconnections. This review aims to highlight these differences and similarities between electrochemistry and photoredox catalysis by comparing their underlying physical chemistry principles and describing their impact on electrochemical and photochemical methods.

Fabrication of a boron-doped nanocrystalline diamond grown on an WC–Co electrode for degradation of phenol

Cemented carbide (WC–Co) is applied as the substrate instead of conventional ones such as Si, Ti, and Nb, on which nanocrystalline BDD films are deposited by hot filament chemical vapor deposition. Then the WC–Co/BDD electrodes are investigated by Field Emission Scanning Electron Microscopy (FE-SEM), Micro-Raman Spectroscopy, X-ray photoelectron spectroscopy (XPS), a four-point probe method, accelerated life test (ALT), and electrochemical analysis. According to the results, the BDD films deposited on the WC–Co substrate are highly uniform and pinhole-free with a grain size of 100 nm and a low compressive stress. The WC–Co/BDD electrode has a wide potential window of 3.8 V and low background currents in 0.5 mol L⁻¹ H₂SO₄ electrolytes and shows a quasi-reversible behavior in the K₃[Fe(CN)₆] redox system. The electrode has a service life of more than 400 h in the ALT with 3 mol L⁻¹ H₂SO₄ electrolytes at a constant current density of 1 A cm⁻². These electrochemical performances of BDD films on the WC–Co substrate is similar to or even slightly better than that on the commonly used substrates. Finally, phenol is used as a pollutant to test the activity of the WC–Co/BDD electrode. The results of replicated experiments show that the average COD reduces from the initial 5795 to 85 mg L⁻¹, and the average current efficiency is about 46%. This suggests that the WC–Co/BDD electrode has a good mineralization capacity in phenol with a high concentration.

WC–Co is applied as the substrate instead of conventional ones, on which nanocrystalline BDD films are deposited by HFCVD. WC–Co/BDD electrode like the standard BDD shows a wide potential window and a good mineralization capacity in phenol.

Versatile Tools for Understanding Electrosynthetic Mechanisms

Electrosynthesis is a popular, green alternative to traditional organic methods. Understanding the mechanisms is not trivial yet is necessary to optimize reaction processes. To this end, a multitude of analytical tools is available to identify and quantitate reaction products and intermediates. The first portion of this review serves as a guide that underscores electrosynthesis fundamentals, including instrumentation, electrode selection, impacts of electrolyte and solvent, cell configuration, and methods of electrosynthesis. Next, the broad base of analytical techniques that aid in mechanism elucidation are covered in detail. These methods are divided into electrochemical, spectroscopic, chromatographic, microscopic, and computational. Technique selection is dependent on predicted reaction pathways and electrogenerated intermediates. Often, a combination of techniques must be utilized to ensure accuracy of the proposed model. To conclude, future prospects that aim to enhance the field are discussed.

The occurrence and control of waterborne viruses in drinking water treatment: A review

As the coronavirus disease 2019 continues to spread globally, its culprit, the severe acute respiratory syndrome coronavirus 2 has been brought under scrutiny. In addition to inhalation transmission, the possible fecal-oral viral transmission via water/wastewater has also been brought under the spotlight, necessitating a timely global review on the current knowledge about waterborne viruses in drinking water treatment system - the very barrier that intercepts waterborne pathogens to terminal water users. In this article we reviewed the occurrence, concentration methods, and control strategies, also, treatment performance on waterborne viruses during drinking water treatment were summarized. Additionally, we emphasized the potential of applying the quantitative microbial risk assessment to guide drinking water treatment to mitigate the viral exposure risks, especially when the unregulated novel viral pathogens are of concern. This review paves road for better control of viruses at drinking water treatment plants to protect public health.

Impacts of applied voltage on forward osmosis process harvesting microalgae: Filtration behaviors and lipid extraction efficiency

Microalgae are promising source of biofuels, while harvesting process is the obstacle for the further development. Herein, a treatment system that combined electrochemical process with forward osmosis (FO) membrane filtration process was developed to achieve microalgae harvesting. The conductive FO membranes were used as both electrode materials and basic separation system. With -5 V electric field being applied, 57.6% of reduction in water flux loss was observed, while microalgae recovery efficiency increased by 17.3%. The lipid content also increased to nearly 38%. Meanwhile, the inevitable reverse diffusion of solutes in the FO process and the concentration process of the microalgae solution increased the salinity of the microalgae solution, which is generally regarded as an obstacle for the application of FO. However, in the electrically-assisted FO system, it not only improved the efficiency of the electrochemical process, but also can increase the lipid content. The lipid extraction efficiency of the -5 V electric field increased from 17.7% and 28.5% to 20.4% and 31.1%, respectively, with one and two times extractions. The synergistic effect of the reverse diffusion of Cl^- and electrochemical process was conducive for the improvement of the lipid extraction efficiency, and is expected to reduce the energy consumption of the lipid extraction process.

Electrode Materials in Modern Organic Electrochemistry

The choice of electrode material is critical for achieving optimal yields and selectivity in synthetic organic electrochemistry. The material imparts significant influence on the kinetics and thermodynamics of electron transfer, and frequently defines the success or failure of a transformation. Electrode processes are complex and so the choice of a material is often empirical and the underlying mechanisms and rationale for success are unknown. In this review, we aim to highlight recent instances of electrode choice where rationale is offered, which should aid future reaction development.

Nanocrystalline Boron-Doped Diamond as a Corrosion-Resistant Anode for Water Oxidation via Si Photoelectrodes

Due to its high sensitivity to corrosion, the use of Si in direct photoelectrochemical (PEC) water-splitting systems that convert solar energy into chemical fuels has been greatly limited. Therefore, the development of low-cost materials resistant to corrosion under oxidizing conditions is an important goal toward a suitable protection of otherwise unstable semiconductors used in PEC cells. Here, we report on the development of a protective coating based on thin and electrically conductive nanocrystalline boron-doped diamond (BDD) layers. We found that  BDD layers protect the underlying Si photoelectrodes over a wide pH range (1-14) in aqueous electrolyte solutions. A BDD layer maintains an efficient charge carrier transfer from the underlying silicon to the electrolyte solution. Si|BDD photoelectrodes show no sign of performance degradation after a continuous PEC treatment in neutral, acidic, and basic electrolytes. The deposition of a cobalt phosphate (CoPi) oxygen evolution catalyst onto the BDD layer significantly reduces the overpotential for water oxidation, demonstrating the ability of  BDD layers to substitute the transparent conductive oxide coatings, such as indium tin oxide (ITO) and fluorine-doped tin oxide (FTO), frequently used as protective layers in Si photoelectrodes.

Parabens abatement from surface waters by electrochemical advanced oxidation with boron doped diamond anodes

The removal efficiency of four commonly-used parabens by electrochemical advanced oxidation with boron-doped diamond anodes in two different aqueous matrices, namely ultrapure water and surface water from the Guadiana River, has been analyzed. Response surface methodology and a factorial, composite, central, orthogonal, and rotatable (FCCOR) statistical design of experiments have been used to optimize the process. The experimental results clearly show that the initial concentration of pollutants is the factor that influences the removal efficiency in a more remarkable manner in both aqueous matrices. As a rule, as the initial concentration of parabens increases, the removal efficiency decreases. The current density also affects the removal efficiency in a statistically significant manner in both aqueous matrices. In the water river aqueous matrix, a noticeable synergistic effect on the removal efficiency has been observed, probably due to the presence of chloride ions that increase the conductivity of the solution and contribute to the generation of strong secondary oxidant species such as chlorine or HClO/ClO ^-. The use of a statistical design of experiments made it possible to determine the optimal conditions necessary to achieve total removal of the four parabens in ultrapure and river water aqueous matrices.

Electrooxidation of New Synthetic Cannabinoids: Voltammetric Determination of Drugs in Seized Street Samples and Artificial Saliva

The electrochemical sensing of new psychoactive substances, synthetic cannabinoids (SCs), commonly marketed under the trade name "Spice" is explored for the first time. The electrooxidative transformations of 11 new indole and indazole SCs which are currently the predominant illicit smoking mixtures on the drug market is performed using cyclic and differential pulse voltammetry with various commercially available electrodes (Pt, GC, Bdd). It is found that SCs exhibit voltammetric responses that can be used for their detection in smoking mixtures and artificial saliva with limits of detection in the nanomolar range. The indole-based SCs exhibited an anodic peak at ∼1.5 V (vs Ag/Ag(+)) and ∼1.2 V (vs Ag/AgCl) in acetonitrile and artificial saliva, respectively, and the indazoles exhibited corresponding peaks at ∼1.7 V and ∼1.5 V. The voltammetric procedure was evaluated by prescreening of SCs in 12 confiscated street samples that were also independently analyzed by GC-MS and LC-MS techniques. A good agreement between the three analytical protocols was found. Voltammetry provides a tool for the prescreening of synthetic cannabinoid derivatives in seized materials and biological samples.

Effect of doping level of colored TiO2 nanotube arrays fabricated by electrochemical self-doping on electrochemical properties

The objective of this study was to investigate the effect of the doping level of blue and black TiO₂ NTAs on their electrochemical properties, including the capacitive and oxidant-generating properties.

Critical review of electrochemical advanced oxidation processes for water treatment applications

Electrochemical advanced oxidation processes (EAOPs) have emerged as novel water treatment technologies for the elimination of a broad-range of organic contaminants. Considerable validation of this technology has been performed at both the bench-scale and pilot-scale, which has been facilitated by the development of stable electrode materials that efficiently generate high yields of hydroxyl radicals (OH˙) (e.g., boron-doped diamond (BDD), doped-SnO2, PbO2, and substoichiometic- and doped-TiO2). Although a promising new technology, the mechanisms involved in the oxidation of organic compounds during EAOPs and the corresponding environmental impacts of their use have not been fully addressed. In order to unify the state of knowledge, identify research gaps, and stimulate new research in these areas, this review critically analyses published research pertaining to EAOPs. Specific topics covered in this review include (1) EAOP electrode types, (2) oxidation pathways of select classes of contaminants, (3) rate limitations in applied settings, and (4) long-term sustainability. Key challenges facing EAOP technologies are related to toxic byproduct formation (e.g., ClO4(-) and halogenated organic compounds) and low electro-active surface areas. These challenges must be addressed in future research in order for EAOPs to realize their full potential for water treatment.

Mechanism of perchlorate formation on boron-doped diamond film anodes

This research investigated the mechanism of perchlorate (ClO(4)(-)) formation from chlorate (ClO(3)(-)) on boron-doped diamond (BDD) film anodes by use of a rotating disk electrode reactor. Rates of ClO(4)(-) formation were determined as functions of the electrode potential (2.29-2.70 V/standard hydrogen electrode, SHE) and temperature (10-40 °C). At all applied potentials and a ClO(3)(-) concentration of 1 mM, ClO(4)(-) production rates were zeroth-order with respect to ClO(4)(-) concentration. Experimental and density functional theory (DFT) results indicate that ClO(3)(-) oxidation proceeds via a combination of direct electron transfer and hydroxyl radical oxidation with a measured apparent activation energy of 6.9 ± 1.8 kJ·mol(-1) at a potential of 2.60 V/SHE. DFT simulations indicate that the ClO(4)(-) formation mechanism involves direct oxidation of ClO(3)(-) at the BDD surface to form ClO(3)(•), which becomes activationless at potentials > 0.76 V/SHE. Perchloric acid is then formed via the activationless homogeneous reaction between ClO(3)(•) and OH(•) in the diffuse layer next to the BDD surface. DFT simulations also indicate that the reduction of ClO(3)(•) can occur at radical sites on the BDD surface to form ClO(3)(-) and ClO(2), which limits the overall rate of ClO(4)(-) formation.

Understanding reductive dechlorination of trichloroethene on boron-doped diamond film electrodes

This research investigated reduction of trichloroethylene (TCE) at boron-doped diamond (BDD) film cathodes using a rotating disk electrode reactor. Rates of TCE reduction were determined as functions of the electrode potential and TCE concentration over a temperature range between 2 and 32 degrees C. Reduction of TCE resulted in production of acetate and chloride ions with no detectable intermediate products. At a current density of 15 mA/cm2 and concentrations below 0.75 mM, reaction rates were first order with respect to TCE concentration, with surface area normalized rate constants 2 orders of magnitude greater than those for iron electrodes. Density functional theory (DFT) simulations were used to evaluate activation barriers for reduction by direct electron transfer, and for reaction with four functional groups commonly found on BDD surfaces. The DFT calculated activation barrier for direct electron transfer was more than 4 times greater than the experimentally measured value of 22 kJ/mol. In contrast, the DFT activation barrier for reaction at a deprotonated hydroxyl site on a tertiary carbon atom (triple bond C-O(-)) of 24 kJ/mol was in close agreement with the experimental value. Both experiments and quantum mechanical simulations support a TCE reduction mechanism that involves chemically adsorbed intermediates.

Anodic Electrochemical Pretreatment Time and Potential Affect the Electrochemical Characteristics of Moderately Boron-Doped Diamond Electrode

Boron-doped diamond (BDD) electrodes, both as-prepared and electrochemically oxidized were studied. The relation between the anodic oxidation treatment time, anodic potential and electrochemical characteristics has been discussed. Electron transfer processes in all BDD electrode surface were studied by cyclic voltammetry. The ferric/ferrous sulfate and ferri/ ferrocyanide redox systems were chosen respectively to act as the probe of one-electron trans- fer processes. The relation between ∆Ep and ψ, the dimensionless parameter, was obtained with a correlation coefficient greater than 0.9987 by mathematics fitting function. The rate constants of the electron transfer reaction, k0, were evaluated using the ∆Ep values. The k0 values for all BDD electrodes ranged from 3.33 × 10-5 to 4.72 × 10-5 cm s-1 in 0.1 M FeSO4/ 0.1 M H2SO4 and from 1.01 × 10-4 to 2.49 × 10-4 cm s-1 in 0.1 M K4[Fe(CN)6]/0.1 M H2SO4 system, which were in the standard range for a quasi-reversible system, respectively. The electrochemical properties of the BDD electrodes changed as a function of the surface anodic treatment time and potential. The anodic oxidation at low potential stripped mainly the impurities of BDD surface, sp2-carbon, and had little effect on the modification of the surface. While increasing the anodic potential up to +2.0 V, the anodic oxidation stripped the impurities of the BDD surface at first and carried out the modification of the BDD surface from hydrogen-terminated hydrophobic to oxygen-terminated hydrophilic surface with increasing anodic treatment time.