Carbon-coated tungsten and molybdenum carbides for electrode of electrochemical capacitor

State-of-the-art in carbides/carbon composites for electromagnetic wave absorption

Electromagnetic wave absorbing materials (EWAMs) have made great progress in the past decades, and are playing an increasingly important role in radiation prevention and antiradar detection due to their essential attenuation toward incident EM wave. With the flourish of nanotechnology, the design of high-performance EWAMs is not just dependent on the intrinsic characteristics of single-component medium, but pays more attention to the synergistic effects from different components to generate rich loss mechanisms. Among various candidates, carbides and carbon materials are usually labeled with the features of chemical stability, low density, tunable dielectric property, and diversified morphology/microstructure, and thus the combination of carbides and carbon materials will be a promising way to acquire new EWAMs with good practical application prospects. In this review, we introduce EM loss mechanisms related to dielectric composites, and then highlight the state-of-the-art progress in carbides/carbon composites as high-performance EWAMs, including silicon carbide/carbon, MXene/carbon, molybdenum carbide/carbon, as well as some uncommon carbides/carbon composites and multicomponent composites. The critical information regarding composition optimization, structural engineering, performance reinforcement, and structure-function relationship are discussed in detail. In addition, some challenges and perspectives for the development of carbides/carbon composites are also proposed after comparing the performance of some representative composites.

Influence of Carbonization Conditions on Structural and Surface Properties of K-Doped Mo2C Catalysts for the Synthesis of Methyl Mercaptan from CO/H2/H2S

The cooperative transition of sulfur-containing pollutants of H2S/CO/H2 to the high-value chemical methyl mercaptan (CH3SH) is catalyzed by Mo-based catalysts and has good application prospects. Herein, a series of Al2O3-supported molybdenum carbide catalysts with K doping (denoted herein as K-Mo2C/Al2O3) are fabricated by the impregnation method, with the carbonization process occurring under different atmospheres and different temperatures between 400 and 600 °C. The CH4-K-Mo2C/Al2O3 catalyst carbonized by CH4/H2 at 500 °C displays unprecedented performance in the synthesis of CH3SH from CO/H2S/H2, with 66.1% selectivity and a 0.2990 g·gcat-1·h-1 formation rate of CH3SH at 325 °C. H2 temperature-programmed reduction, temperature-programmed desorption, X-ray diffraction and Raman and BET analyses reveal that the CH4-K-Mo2C/Al2O3 catalyst contains more Mo coordinatively unsaturated surface sites that are responsible for promoting the adsorption of reactants and the desorption of intermediate products, thereby improving the selectivity towards and production of CH3SH. This study systematically investigates the effects of catalyst carbonization and passivation conditions on catalyst activity, conclusively demonstrating that Mo2C-based catalyst systems can be highly selective for producing CH3SH from CO/H2S/H2.

Recent Advances in Carbon Dioxide Adsorption, Activation and Hydrogenation to Methanol using Transition Metal Carbides

The inevitable emission of carbon dioxide (CO₂ ) due to the burning of a substantial amount of fossil fuels has led to serious energy and environmental challenges. Metal-based catalytic CO₂ transformations into commodity chemicals are a favorable approach in the CO₂ mitigation strategy. Among these transformations, selective hydrogenation of CO₂ to methanol is the most promising process that not only fulfils the energy demands but also re-balances the carbon cycle. The investigation of CO₂ adsorption on the surface of heterogeneous catalyst is highly important because the formation of various intermediates which determines the selectivity of product. Transition metal carbides (TMCs) have received considerable attention in recent years because of their noble metal-like reactivity, ceramic-like properties, high chemical and thermal stability. These features make them excellent catalytic materials for a variety of transformations such as CO₂ adsorption and its conversion into value-added chemicals. Herein, the catalytic properties of TMCs are summarize along with synthetic methods, CO₂ binding modes, mechanistic studies, effects of dopant on CO₂ adsorption, and carbon/metal ratio in the CO₂ hydrogenation reaction to methanol using computational as well as experimental studies. Additionally, this Review provides an outline of the challenges and opportunities for the development of potential TMCs in CO₂ hydrogenation reactions.

Facile synthesis of MnCo2S4 nanosheets as a binder-free electrode material for high performance supercapacitor applications

This paper reported an easy synthesis of MnCo2S4 (MCS) nanosheets by a one-pot solvothermal method for high performance supercapacitor electrode material applications. The obtained MCS nanosheets with an ultrathin thickness...

An Overview of Recent Advances in the Synthesis and Applications of the Transition Metal Carbide Nanomaterials

Good stability and reproducibility are important factors in determining the place of any material in their respective field and these two factors also enable them to use in various applications. At present, transition metal carbides (TMCs) have high demand either in the two-dimensional (2D) form (MXene) or as nanocomposites, nanoparticles, carbide films, carbide nano-powder, and carbide nanofibers. They have shown good stability at high temperatures in different environments and also have the ability to show adequate reproducibility. Metal carbides have shown a broad spectrum of properties enabling them to engage the modern approach of multifacet material. Several ways have been routed to synthesize metal carbides in their various forms but few of those gain more attention due to their easy approach and better properties. TMCs find applications in various fields, such as catalysts, absorbents, bio-sensors, pesticides, electrogenerated chemiluminescence (ECL), anti-pollution and anti-bacterial agents, and in tumor detection. This article highlights some recent developments in the synthesis methods and applications of TMCs in various fields.

Enzyme-free electrocatalytic sensing of hydrogen peroxide using a glassy carbon electrode modified with cobalt nanoparticle-decorated tungsten carbide

An efficient non-enzymatic electrochemical sensor for hydrogen peroxide (H₂O₂) was constructed by modifying a glassy carbon electrode (GCE) with a nanocomposite prepared from cobalt nanoparticle (CoNP) and tungsten carbide (WC). The nanocomposite was prepared at low temperature through a simple technique. Its crystal structure, surface morphology and elemental composition were investigated via X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. The results showed the composite to be uniformly distributed and that the CoNP are well attached to the surface of the flake-like WC. Electrochemical studies show that the modified GCE has an improved electrocatalytic activity toward the reduction of H₂O₂. H₂O₂ can be selectively detected, best at a working voltage of -0.4 V (vs. Ag/AgCl), with a 6.3 nM detection limit over the wide linear range from 50 nM to 1.0 mM. This surpasses previously reported non-enzymatic H₂O₂ sensors. The sensor was successfully applied to the determination of H₂O₂ in contact lens solutions and in spiked serum samples. Graphical abstract Schematic presentation of a method for electrochemical sensing of hydrogen peroxide in real samples using cobalt nanoparticle decorated tungsten carbide (WCC) modified glassy carbon electrode (GCE).

Three-Dimensional Carbon Nitride Nanowire Scaffold for Flexible Supercapacitors

Herein, a 3D composite electrode supported by g-C3N4 nanowire framework as scaffold and poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonate) (PEDOT: PSS) as conducting polymer is reported for flexible solid-state electrochemical capacitors. Compared to pure PEDOT: PSS, the composite electrodes have a greatly increased specific surface and showed good electrochemical performance. A specific capacitance of 202 F g-1 is achieved, and 83.5% of initial capacitance maintained after 5000 cycles. The device based on the 3D g-C3N4/PEDOT: PSS electrode also exhibits good performance in capacitance, flexibility, and cycling stability.

Development of an electrochemical sensor based on a functionalized carbon black/tungsten carbide hybrid composite for the detection of furazolidone

In this study, the simple sonochemical synthesis of functionalized carbon black (f-CB) anchored with tungsten carbide (WC) is used to prepare a novel electrocatalyst for the electrochemical detection of furazolidone (FU) by modifying screen-printed carbon electrodes (SPCE).

Facile, low-temperature synthesis of tungsten carbide (WC) flakes for the sensitive and selective electrocatalytic detection of dopamine in biological samples

Transition metal carbides have shown potential for use in electrochemical applications due to their excellent electronic conductivity, stability and electrocatalysis.

Controlling the morphology and property of carbon fiber/polyaniline composites for supercapacitor electrode materials by surface functionalization

The effect of surface functionalization of carbon materials on the morphology and performance of carbon/polymer composite materials for supercapacitor electrodes was investigated here.

A high-performance dual-function material: self-assembled super long α-Fe2O3 hollow tubes with multiple heteroatom (C-, N- and S-) doping

Flow diagram of the synthesis of nitrogen doped α-Fe₂O₃ nanorods into super long hollow tubes.

Oriented arrays of polyaniline nanorods grown on graphite nanosheets for an electrochemical supercapacitor

Oriented arrays of polyaniline (PANI) nanorods grown on expanded graphite (EG) nanosheets are fabricated by in situ polymerization to achieve excellent electrochemical properties for applications as supercapacitor electrodes. EG serves as an excellent 3D conductive skeleton that supports a highly electrolytic accessible surface area of redox-active PANI and provides a direct path for electrons. The porous and ordered nanostructure provides a larger contact surface area for the intercalation/deintercalation of protons into/out of active materials and shortens the path length for electrolyte ion transport. The maximum specific capacitance of 1665 F g(-1) at 1 A g(-1) is observed in the PANI/EG electrode with 10% EG content. The composite electrode material also exhibits significant rate capability and good long-term cycling stability. The results demonstrate that PANI is effectively utilized with the assistance of EG conductive skeletons in the electrode. Such 3D composite nanoarchitecture is very promising for the next generation of high-performance electrochemical supercapacitors.

Hierarchical MnMoO(4)/CoMoO(4) heterostructured nanowires with enhanced supercapacitor performance

Recent attention has been focused on the synthesis and application of complex heterostructured nanomaterials, which can have superior electrochemical performance than single-structured materials. Here we synthesize the three-dimensional (3D) multicomponent oxide, MnMoO(4)/CoMoO(4). Hierarchical heterostructures are successfully prepared on the backbone material MnMoO(4) by a simple refluxing method under mild conditions; and surface modification is achieved. We fabricate asymmetric supercapacitors based on hierarchical MnMoO(4)/CoMoO(4) heterostructured nanowires, which show a specific capacitance of 187.1 F g(-1) at a current density of 1 A g(-1), and good reversibility with a cycling efficiency of 98% after 1,000 cycles. These results further demonstrate that constructing 3D hierarchical heterostructures can improve electrochemical properties. 'Oriented attachment' and 'self-assembly' crystal growth mechanisms are proposed to explain the formation of the heterostructures.

Facile preparation and enhanced capacitance of the polyaniline/sodium alginate nanofiber network for supercapacitors

A porous and mat-like polyaniline/sodium alginate (PANI/SA) composite with excellent electrochemical properties was polymerized in an aqueous solution with sodium sulfate as a template. Ultraviolet-visible spectra, X-ray diffraction pattern, and Fourier transform infrared spectra were employed to characterize the PANI/SA composite, indicating that the PANI/SA composite was successfully prepared. The PANI/SA nanofibers with uniform diameters from 50 to 100 nm can be observed on scanning electron microscopy. Cyclic voltammetry and galvanostatic charge/discharge tests were carried out to investigate the electrochemical properties. The PANI/SA nanostructure electrode exhibits an excellent specific capacitance as high as 2093 F g(-1), long cycle life, and fast reflect of oxidation/reduction on high current changes. The remarkable electrochemical characteristic is attributed to the nanostructured electrode materials, which generates a high electrode/electrolyte contact area and short path lengths for electronic transport and electrolyte ion. The approach is simple and can be easily extended to fabricate nanostructural composites for supercapacitor electrode materials.