Limitations of Plant Stress Tolerance upon Heat and CO2 Exposure in Black Poplar: Assessment of Photosynthetic Traits and Stress Volatile Emissions

Volatile organic compounds (VOCs) emitted by plants may help in understanding the status of a plant's physiology and its coping with mild to severe stress. Future climatic projections reveal that shifts in temperature and CO2 availability will occur, and plants may incur the uncoupling of carbon assimilation and synthesis of key molecules. This study explores the patterns of emissions of key VOCs (isoprene, methanol, acetaldehyde, and acetic acid) emitted by poplar leaves (more than 350) under a combined gradient of temperature (12-42 °C) and air CO2 concentration (400-1500 ppm), along with measurements of photosynthetic rates and stomatal conductance. Isoprene emission exhibited a rise with temperature and CO2 availability, peaking at 39 °C, the temperature at which methanol emission started to peak, illustrating the limit of stress tolerance to severe damage. Isoprene emission was uncoupled from the photosynthesis rate, indicating a shift from the carbon source for isoprene synthesis, while assimilation was decreased. Methanol and acetaldehyde emissions were correlated with stomatal conductance and peaked at 25 °C and 1200 ppm CO2. Acetic acid emissions lacked a clear correlation with stomatal conductance and the emission pattern of its precursor acetaldehyde. This study offers crucial insights into the limitations of photosynthetic carbon and stress tolerance.

Breaking Continuously Packed Bimetallic Sites to Singly Dispersed on Nonmetallic Support for Efficient Hydrogen Production

We have synthesized Pt1Zn3/ZnO, also termed 0.01 wt %Pt/ZnO-O2-H2, as a catalyst containing singly dispersed single-atom bimetallic sites, also called a catalyst of singly dispersed bimetallic sites or a catalyst of isolated single-atom bimetallic sites. Its catalytic activity in partial oxidation of methanol to hydrogen at 290 °C is found to be 2-3 orders of magnitude higher than that of Pt-Zn bimetallic nanoparticles supported on ZnO, 5.0 wt %Pt/ZnO-N2-H2. Selectivity for H2 on Pt1Zn3/ZnO reaches 96%-100% at 290-330 °C, arising from the uniform coordination environment of single-atom Pt1 in singly dispersed single-atom bimetallic sites, Pt1Zn3 on 0.01 wt %Pt/ZnO-O2-H2, which is sharply different from various coordination environments of Pt atoms in coexisting PtxZny (x ≥ 0, y ≥ 0) sites on Pt-Zn bimetallic nanoparticles. Computational simulations attribute the extraordinary catalytic performance of Pt1Zn3/ZnO to the stronger adsorption of methanol and the lower activation barriers in O-H dissociation of CH3OH, C-H dissociations of CH2O to CO, and coupling of intermediate CO with atomic oxygen to form CO2 on Pt1Zn3/ZnO as compared to those on Pt-Zn bimetallic nanoparticles. It demonstrates that anchoring uniform, isolated single-atom bimetallic sites, also called singly dispersed bimetallic sites on a nonmetallic support can create new catalysts for certain types of reactions with much higher activity and selectivity in contrast to bimetallic nanoparticle catalysts with coexisting, various metallic sites MxAy (x ≥ 0, y ≥ 0). As these single-atom bimetallic sites are cationic and anchored on a nonmetallic support, the catalyst of singly dispersed single-atom bimetallic sites is different from a single-atom alloy nanoparticle catalyst. The critical role of the 0.01 wt %Pt in the extraordinary catalytic performance calls on fundamental studies of the profound role of a trace amount of a metal in heterogeneous catalysis.

Strain-Induced Self-Assembly at Interface of Two-Dimensional Heterostructures Boosts CO2 Reduction to Methanol by H2O

CO2 conversion with pure H2O into CH3OH and O2 driven by solar energy can supply fuels and life-essential substances for extraterrestrial exploration. However, the effective production of CH3OH is significantly challenging. Here we report an organozinc complex/MoS2 heterostructure linked by well-defined zinc-sulfur covalent bonds derived by the structural deformation and intensive coupling of dx2 - y2(Zn)-p(S) orbitals at the interface, resulting in distinctive charge transfer behaviors and excellent redox capabilities as revealed by experimental characterizations and first-principle calculations. The synthesis strategy is further generalized to more organometallic compounds, achieving various heterostructures for CO2 photoreduction. The optimal catalyst delivers a promising CH3OH yield of 2.57 mmol gcat-1 h-1 and selectivity of more than 99.5%. The reverse water gas shift mechanism is identified for methanol formation. Meanwhile, energy-unfavorable adsorption of methanol on MoS2, where the photogenerated holes accumulate, ensures the selective oxidation of water over methanol.

Complete genome sequence of Methanosphaera sp. ISO3-F5, a rumen methylotrophic methanogen

Methanosphaera spp. are methylotrophic methanogenic archaea and members of the order Methanobacteriales with few cultured representatives. Methanosphaera sp. ISO3-F5 was isolated from sheep rumen contents in New Zealand. Here, we report its complete genome, consisting of a large chromosome and a megaplasmid (GenBank accession numbers CP118753 and CP118754, respectively).

A unique choline nitrate-based organo-aqueous electrolyte enables carbon/carbon supercapacitor operation in a wide temperature window (-40°C to 60°C)

Some drawbacks of aqueous electrolytes, such as freezing at low temperatures and extensive evaporation at high temperatures, restrict their industrial viability. This article introduces a stabilized neutral aqueous choline nitrate electrolyte with a 10 vol.% methanol additive that improves the temperature stability of the electrolyte via enhanced hydrogen bonding with the choline cation and water and maintains the good state of health of the supercapacitor cells under extreme operating conditions. The symmetric carbon/carbon supercapacitor in 5 mol/kg choline nitrate + 10 vol.% methanol (σ = 76 ms/cm at 25°C) exhibits 103 F/g at room temperature during galvanostatic charge/discharge up to 1.5 V, which decreases to 78 F/g at -40°C due to the suppressed Faradaic reactions occurring at the carbon electrode. However, under similar charge/discharge conditions, the capacitance increases to 112 F/g when the supercapacitor operates at 60°C. This capacitance increase at high temperatures is due to the Faradaic reactions related to enhanced hydrogen adsorption and desorption. The most remarkable aspect of the proposed supercapacitor is its ability to maintain capacitance and power performance during high voltage floating at 1.5 V at three tested temperatures (-40°C, 24°C, and 60°C).

Exploring the Impact of Active Site Structure on the Conversion of Methane to Methanol in Cu-Exchanged Zeolites

In the past, Cu-oxo or -hydroxy clusters hosted in zeolites have been suggested to enable the selective conversion of methane to methanol, but the impact of the active site's stoichiometry and structure on methanol production is still poorly understood. Herein, we apply theoretical modeling in conjunction with experiments to study the impact of these two factors on partial methane oxidation in the Cu-exchanged zeolite SSZ-13. Phase diagrams developed from first-principles suggest that Cu-hydroxy or Cu-oxo dimers are stabilized when O2 or N2O are used to activate the catalyst, respectively. We confirm these predictions experimentally and determine that in a stepwise conversion process, Cu-oxo dimers can convert twice as much methane to methanol compared to Cu-hydroxyl dimers. Our theoretical models rationalize how Cu-di-oxo dimers can convert up to two methane molecules to methanol, while Cu-di-hydroxyl dimers can convert only one methane molecule to methanol per catalytic cycle. These findings imply that in Cu clusters, at least one oxo group or two hydroxyl groups are needed to convert one methane molecule to methanol per cycle. This simple structure-activity relationship allows to intuitively understand the potential of small oxygenated or hydroxylated transition metal clusters to convert methane to methanol.

Chiral resolution of cationic piperazine derivatives by capillary electrophoresis using sulfated β-cyclodextrin

This research focuses on the development and validation of a capillary electrophoresis (CE) method for the chiral separation of three H1-antihistamine drugs chlorcyclizine, norchlorcyclizine, and neobenodine using sulfated β-cyclodextrin (S-β-CD) as the chiral selector. The study explores various factors influencing the separation efficiency, including CD concentration, organic modifier content, voltage application, and buffer pH. Optimal conditions were identified as a 100 mM phosphate buffer (pH 6.0) with 34 mg mL-1 S-β-CD and 40% (v/v) methanol. The method demonstrated excellent linearity in calibration curves, with coefficients of determination exceeding 0.99 for each enantiomer. Precision studies revealed good intra- and inter-day precision for migration times and peak areas. The limits of detection and quantification for the analytes were within the ranges of 5.9-11.4 and 18-34.6 µmol L-1, respectively. Overall, the developed CE method offers a robust and precise approach for the chiral separation of H1-antihistamine drugs, holding promise for pharmaceutical applications.

Construction of Ni/In2O3 Integrated Nanocatalysts Based on MIL-68(In) Precursors for Efficient CO2 Hydrogenation to Methanol

The efficient and economic conversion of CO2 and renewable H2 into methanol has received intensive attention due to growing concern for anthropogenic CO2 emissions, particularly from fossil fuel combustion. Herein, we have developed a novel method for preparing Ni/In2O3 nanocatalysts by using porous MIL-68(In) and nickel(II) acetylacetonate (Ni(acac)2) as the dual precursors of In2O3 and Ni components, respectively. Combined with in-depth characterization analysis, it was revealed that the utilization of MIL-68(In) as precursors favored the good distribution of Ni nanoparticles (∼6.2 nm) on the porous In2O3 support and inhibited the metal sintering at high temperatures. The varied catalyst fabrication parameters were explored, indicating that the designed Ni/In2O3 catalyst (Ni content of 5 wt %) exhibited better catalytic performance than the compared catalyst prepared using In(OH)3 as a precursor of In2O3. The obtained Ni/In2O3 catalyst also showed excellent durability in long-term tests (120 h). However, a high Ni loading (31 wt %) would result in the formation of the Ni-In alloy phase during the CO2 hydrogenation which favored CO formation with selectivity as high as 69%. This phenomenon is more obvious if Ni and In2O3 had a strong interaction, depending on the catalyst fabrication methods. In addition, with the aid of in situ diffuse reflectance infrared Fourier transform spectroscopy and density functional theory (DFT) calculations, the Ni/In2O3 catalyst predominantly follows the formate pathway in the CO2 hydrogenation to methanol, with HCOO* and *H3CO as the major intermediates, while the small size of Ni particles is beneficial to the formation of formate species based on DFT calculation. This study suggests that the Ni/In2O3 nanocatalyst fabricated using metal-organic frameworks as precursors can effectively promote CO2 thermal hydrogenation to methanol.

Comparing methanol and glycerol as carbon sources for mainstream partial denitrification/anammox in an IFAS process

This study explored the implementation of mainstream partial denitrification with anammox (PdNA) in the second anoxic zone of a wastewater treatment process in an integrated fixed film activated sludge (IFAS) configuration. A pilot study was conducted to compare the use of methanol and glycerol as external carbon sources for an IFAS PdNA startup, with a goal to optimize nitrogen removal while minimizing carbon usage. The study also investigated the establishment of anammox bacteria on virgin carriers in IFAS reactors without the use of seeding, and it is the first IFAS PdNA startup to use methanol as an external carbon source. The establishment of anammox bacteria was confirmed in both reactors 102 days after startup. Although the glycerol-fed reactor achieved a higher steady-state maximum ammonia removal rate because of anammox bacteria (1.6 ± 0.3 g/m2/day) in comparison with the methanol-fed reactor (1.2 ± 0.2 g/m2/day), both the glycerol- and methanol-fed reactors achieved similar average in situ ammonia removal rates of 0.39 ± 0.2 g/m2/day and 0.40 ± 0.2 g/m2/day, respectively. Additionally, when the upstream ammonia versus NOx (AvN) control system maintained an ideal ratio of 0.40-0.50 g/g, the methanol-fed reactor attained a lower average effluent TIN concentration (3.50 ± 1.2 mg/L) than the glycerol-fed reactor (4.43 ± 1.6 mg/L), which was prone to elevated nitrite concentrations in the effluent. Overall, this research highlights the potential for PdNA in IFAS configurations as an efficient and cost-saving method for wastewater treatment, with methanol as a viable carbon source for the establishment of anammox bacteria. PRACTITIONER POINTS: Methanol is an effective external carbon source for an anammox startup that avoids the need for costly alternative carbon sources. The methanol-fed reactor demonstrated higher TIN removal compared with the glycerol-fed reactor because of less overproduction of nitrite. Anammox bacteria was established in an IFAS reactor without seeding and used internally stored carbon to reduce external carbon addition. Controlling the influent ammonia versus NOx (AvN) ratio between 0.40 and 0.50 g/g allowed for low and stable TIN effluent conditions.

Intermediate Transfer Rates and Solid-State Ion Exchange are Key Factors Determining the Bifunctionality of In2O3/HZSM-5 Tandem CO2 Hydrogenation Catalyst

Identifying the descriptors for the synergistic catalytic activity of bifunctional oxide-zeolite catalysts constitutes a formidable challenge in realizing the potential of tandem hydrogenation of CO2 to hydrocarbons (HC) for sustainable fuel production. Herein, we combined CH3OH synthesis from CO2 and H2 on In2O3 and methanol-to-hydrocarbons (MTH) conversion on HZSM-5 and discerned the descriptors by leveraging the distance-dependent reactivity of bifunctional In2O3 and HZSM-5 admixtures. We modulated the distance between redox sites of In2O3 and acid sites of HZSM-5 from milliscale (∼10 mm) to microscale (∼300 μm) and observed a 3-fold increase in space-time yield of HC and CH3OH (7.5 × 10-5 molC gcat-1 min-1 and 2.5 × 10-5 molC gcat-1 min-1, respectively), due to a 10-fold increased rate of CH3OH advection (1.43 and 0.143 s-1 at microscale and milliscale, respectively) from redox to acid sites. Intriguingly, despite the potential of a three-order-of-magnitude enhanced CH3OH transfer at a nanoscale distance (∼300 nm), the sole product formed was CH4. Our reactivity data combined with Raman, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) revealed the occurrence of solid-state-ion-exchange (SSIE) between acid sites and Inδ+ ions, likely forming In2O moieties, inhibiting C-C coupling and promoting CH4 formation through CH3OH hydrodeoxygenation (HDO). Density functional theory (DFT) calculations further revealed that CH3OH adsorption on the In2O moiety with preadsorbed and dissociated H2 forming an H-In-OH-In moiety is the likely reaction mechanism, with the kinetically relevant step appearing to be the hydrogenation of the methyl species. Overall, our study revealed that efficient CH3OH transfer and prevention of ion exchange are the key descriptors in achieving catalytic synergy in bifunctional In2O3/HZSM-5 systems.

Unveiling the Role of Water in Heterogeneous Photocatalysis of Methanol Conversion for Efficient Hydrogen Production

Water molecules, which act as both solvent and reactant, play critical roles in photocatalytic reactions for methanol conversion. However, the influence of water on the adsorption of methanol and desorption of liquid products, which are two essential steps that control the performance in photocatalysis, has been well under-explored. Herein, we reveal the role of water in heterogeneous photocatalytic processes of methanol conversion on the platinized carbon nitride (Pt/C3N4) model photocatalyst. In situ spectroscopy techniques, isotope effects, and computational calculations demonstrate that water shows adverse effects on the adsorption of methanol molecules and desorption processes of methanol oxidation products on the surface of Pt/C3N4, significantly altering the reaction pathways in photocatalytic methanol conversion process. Guided by these discoveries, a photothermal-assisted photocatalytic system is designed to achieve a high solar-to-hydrogen (STH) conversion efficiency of 2.3 %, which is among the highest values reported. This work highlights the important roles of solvents in controlling the adsorption/desorption behaviours of liquid-phase heterogeneous catalysis.

Nephroprotective Effect of the Leaf Extract of Ajuga remota Benth Against Gentamicin-Induced Nephrotoxicity in Swiss Albino Mice

Background

Drug-induced kidney injury was among the most common renal damages, from which gentamicin occupies around 25% of this injury. Gentamicin-induced renal damage is caused by increased free radicals with subsequent amplified inflammation. Ajuga remota leaf extract has many phytochemicals with antioxidant activities, which may improve gentamicin-induced renal damage. Thus, we aimed to investigate the nephroprotective effect of Ajuga remota leaf methanolic extract on gentamicin-induced nephrotoxicity in Swiss Albino Mice.

Methods

An experimental study design was used on 30 experimental mice randomly allocated in six groups: Group I, II, II, IV, and VI, among which mice were given only distilled water, only gentamicin, 600 mg/kg Ajuga remota leaf extract only, gentamicin along with 200 mg/kg extract, gentamicin with 400 mg/kg extract and gentamicin with 600 mg/kg extract, respectively. At the end of the experiment, the mice were sacrificed after being anaesthetized, and blood samples were collected through a cardiac puncture for renal function tests while the kidneys were removed for histopathological evaluation. The data were entered into Epidata version 4.6 and exported to SPSS version 25 for further analysis using one-way analysis of variance. Statistical significance was set at p < 0.05.

Results

Group II mice had significantly higher levels of serum creatinine and blood urea levels compared to group I and III. The body weight of the mice in group V and group VI showed a significant increase compared with Group II. Serum creatinine and blood urea levels were reduced significantly in the Ajuga remota leaf extract administered group of mice compared to group II. Abnormal kidney architectural changes were seen among group II mice; however, those changes were improved after administration of Ajuga remota leaf methanolic extract.

Conclusion

Methanol extract of Ajuga remota leaf provided effective protection against gentamicin-induced oxidative renal damage through its antioxidant effects.

Membrane-Free Selective Semi-Hydrogenation of Alkynes Over an In Situ Formed Copper Nanoparticle Electrode

Selective semi-hydrogenation of alkynes is a significant reaction for preparing functionalized alkenes. Electrochemical semi-hydrogenation presents a sustainable alternative to the traditional thermal process. In this research, affordable copper acetylacetonate is employed as a catalyst precursor for the electrocatalytic hydrogenation of alkynes, using MeOH as the hydrogen source in an undivided cell. Good to excellent yields for both aromatic and aliphatic internal/terminal alkynes are obtained under constant current conditions. Notably, up to 99% Z selectivity is achieved for various internal alkynes. Mechanistic investigations revealed the formation of copper nanoparticles (NPs) at the cathode during electrolysis, acting as the catalyst for the selective semireduction of alkynes. The copper NPs deposited cathode demonstrated reusable for further hydrogenation.

Mitigating the Poisoning Effect of Formate during CO2 Hydrogenation to Methanol over Co-Containing Dual-Atom Oxide Catalysts

During the hydrogenation of CO2 to methanol over mixed-oxide catalysts, the strong adsorption of CO2 and formate poses a barrier for H2 dissociation, limiting methanol selectivity and productivity. Here we show that by using Co-containing dual-atom oxide catalysts, the poisoning effect can be countered by separating the site for H2 dissociation and the adsorption of intermediates. We synthesized a Co- and In-doped ZrO2 catalyst (Co-In-ZrO2) containing atomically dispersed Co and In species. Catalyst characterization showed that Co and In atoms were atomically dispersed and were in proximity to each other owing to a random distribution. During the CO2 hydrogenation reaction, the Co atom was responsible for the adsorption of CO2 and formate species, while the nearby In atoms promoted the hydrogenation of adsorbed intermediates. The cooperative effect increased the methanol selectivity to 86% over the dual-atom catalyst, and methanol productivity increased 2-fold in comparison to single-atom catalysts. This cooperative effect was extended to Co-Zn and Co-Ga doped ZrO2 catalysts. This work presents a different approach to designing mixed-oxide catalysts for CO2 hydrogenation based on the preferential adsorption of substrates and intermediates instead of promoting H2 dissociation to mitigate the poisonous effects of substrates and intermediates.

Two-Membrane Dual Non-Aqueous/Aqueous Electrolyte Flow Cell Operation for Electrochemical Conversion of CO2 to Methyl Formate

Recently, tandem cathodic reactions have been demonstrated in non-aqueous solvents to couple CO2 reduction to a secondary reaction to create novel species that are not produced in aqueous CO2 electrolysis. One reaction that can be performed with high selectivity and durability is the electrochemical conversion of CO2 to formic acid and in-situ esterification with methanol to produce methyl formate. However, the translation to a high-performance flow electrolyzer is far from trivial, as the non-aqueous catholyte leads to reactor challenges including flooding the gas diffusion electrode. Here, a two-membrane flow electrolyzer with both anion and cation exchange membranes was used with flowing methanol catholyte and aqueous anolyte. This design prevented methanol from flooding the cathode, which was a pervasive limiting issue for electrolyzers with a single membrane. Methyl formate production at 42.9 % faradaic efficiency was achieved with pure methanol in a flow electrolyzer with stable performance beyond 80 min. However, low-water-content catholyte compositions also led to increased cell resistance and lower operating current densities. Thus, with the present ionomer materials there is a tradeoff between methyl formate selectivity and current density depending on water concentration, highlighting a need for new ionomers tailored for desirable non-aqueous solvents such as methanol.

Photoinduced Precise Synthesis of Diatomic Ir1 Pd1 -In2 O3 for CO2 Hydrogenation to Methanol via Angstrom-Scale-Distance Dependent Synergistic Catalysis

The atomically dispersed metal catalysts with full atomic utilization and well-defined site structure hold great promise for various catalytic reactions. However, the single metallic site limits the comprehensive reaction performance in most reactions. Here, we demonstrated a photo-induced neighbour-deposition strategy for the precise synthesis of diatomic Ir1 Pd1 on In2 O3 applied for CO2 hydrogenation to methanol. The proximity synergism between diatomic sites enabled a striking promotion in both CO2 conversion (10.5 %) and methanol selectivity (97 %) with good stability of 100 h run. It resulted in record-breaking space-time yield to methanol (187.1 gMeOH  gmetal -1  hour-1 ). The promotional effect mainly originated from stronger CO2 adsorption on Ir site with assistance of H-spillover from Pd site, thus leading to a lower energy barrier for *HCOO pathway. It was confirmed that this synergistic effect strongly depended on the dual-site distance in an angstrom scale, which was attributed to weaker *H spillover and less electron transfer from Pd to Ir site as the Pd-to-Ir distance increased. The average dual-site distance was evaluated by our firstly proposed photoelectric model. Thus, this study introduced a pioneering strategy to precisely synthesize homonuclear/heteronuclear diatomic catalysts for facilitating the desired reaction route via diatomic synergistic catalysis.

Water-Mediated Selectivity Control of CH3 OH versus CO/CH4 in CO2 Photoreduction on Single-Atom Implanted Nanotube Arrays

Controllable methanol production in artificial photosynthesis is highly desirable due to its high energy density and ease of storage. Herein, single atom Fe is implanted into TiO2 /SrTiO3 (TSr) nanotube arrays by two-step anodization and Sr-induced crystallization. The resulting Fe-TSr with both single Fe reduction centers and dominant oxidation facets (001) contributes to efficient CO2 photoreduction and water oxidation for controlled production of CH3 OH and CO/CH4 . The methanol yield can reach to 154.20 µmol gcat -1 h-1 with 98.90% selectivity by immersing all the catalyst in pure water, and the yield of CO/CH4 is 147.48 µmol gcat -1 h-1 with >99.99% selectivity when the catalyst completely outside water. This CH3 OH yield is 50 and 3 times higher than that of TiO2 and TSr and stands among all the state-of-the-art catalysts. The facile gas-solid and gas-liquid-solid phase switch can selectively control CH3 OH production from ≈0% (above H2 O) to 98.90% (in H2 O) via slowly immersing the catalyst into water, where abundant •OH and H2 O around Fe sites play important role in selective CH3 OH production. This work highlights a new insight for water-mediated CO2 photoreduction to controllably produce CH3 OH.

Process Optimization for Production of Persimmon Wine with Lower Methanol

Persimmon wine has various nutritional elements and high commercial potential. However, the high content of methanol, which is derived from the fruit's pectin, always hinders persimmon wine production. To reduce the methanol level in the wine, the effects of persimmon cultivar, starter, pectinase, and pretreatment methods were investigated via single-factor and orthogonal experiments. The persimmon cultivar 'MaoKui' was finally used throughout the study owing to its lowest pectin concentration (24.5 g/kg). The best treatment conditions against the persimmon pulp were pectinase (0.04 g/kg) at 30 °C for 4 h, then boiled at 115 °C for 15 min before fermentation started. The optimized fermentation conditions for wine production were pectinase (0.03 g/kg), 250 mg/kg starter (BO213 and SPARK with equal amounts), at 28 °C for 6 d. The obtained wine had 77.7 mg/L methanol and a 68.4% raw juice yield. The fruit wine had 111.4 mg/L methanol and a 90.6 sensory evaluation score. Forty-nine volatile aromas were identified. Ethyl acetate content was the highest, followed by 3-methyl-1-butanol, 2,3-butanediol, and lactate ethyl ester. The persimmon wine had a unique style with transparent color, elegant aroma, and pure taste.

Abiotic, Hybrid, and Biological Electrocatalytic Materials Applied in Microfluidic Fuel Cells: A Comprehensive Review

This article provides an overview of the work reported in the past decade in the field of microfluidic fuel cells. To develop appropriate research, the most commonly used electrocatalytic materials were considered and a new classification was proposed based on their nature: abiotic, hybrid, or biological. This classification allowed the authors to discern the information collected. In this sense, the types of electrocatalysts used for the oxidation of the most common fuels in different environments, such as glucose, ethanol, methanol, glycerol, and lactate, were presented. There are several phenomena presented in this article. This information gives an overview of where research is heading in the field of materials for electrocatalysis, regardless of the fuel used in the microfluidic fuel cell: the synthesis of abiotic and biological materials to obtain hybrid materials that allow the use of the best properties of each material.

Preparation of Copper-Based Catalysts for Obtaining Methanol by the Chemical Impregnation Method

This paper presents the preparation of heterogeneous catalysts for the direct hydrogenation process of CO2 to methanol. The development of the modern chemical industry is inextricably linked to the use of catalytic processes. As a result, currently over 80% of new technologies introduced in the chemical industry incorporate catalytic processes. Since the basic factor of catalytic processes is the catalysts, the studies for the deepening of the knowledge regarding the nature of the action of the catalysts, for the development of new catalysts and catalytic systems, as well as for their improvement, represent a research priority of a fundamental or applied nature. The Cu/ZnO/Al2O3 catalyst for the synthesis of green methanol, using precursors of an inorganic (copper nitrate, denoted by Cu/ZnO/Al2O3-1) and organic (copper acetate, denoted by Cu/ZnO/Al2O3-2) nature, are obtained by chemical impregnation that includes two stages: preparation and one of calcination. The preparation methods and conditions, as well as the physico-chemical properties of the catalyst precursor, play a major role in the behavior of the catalysts. The prepared catalysts were characterized using atomic adsorption analysis, scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, specific surface area and pore size analyses, adsorption, and the chemisorption of vapor (BET).

Density Functional Theory Study of Methanol Steam Reforming on Pt3Sn(111) and the Promotion Effect of a Surface Hydroxy Group

Methanol steam reforming (MSR) is studied on a Pt3Sn surface using the density functional theory (DFT). An MSR network is mapped out, including several reaction pathways. The main pathway proposed is CH3OH + OH → CH3O → CH2O → CH2O + OH → CH2OOH → CHOOH → COOH → COOH + OH → CO2 + H2O. The adsorption strengths of CH3OH, CH2O, CHOOH, H2O and CO2 are relatively weak, while other intermediates are strongly adsorbed on Pt3Sn(111). H2O decomposition to OH is the rate-determining step on Pt3Sn(111). The promotion effect of the OH group is remarkable on the conversions of CH3OH, CH2O and trans-COOH. In particular, the activation barriers of the O-H bond cleavage (e.g., CH3OH → CH3O and trans-COOH → CO2) decrease substantially by ~1 eV because of the involvement of OH. Compared with the case of MSR on Pt(111), the generation of OH from H2O decomposition is more competitive on Pt3Sn(111), and the presence of abundant OH facilitates the combination of CO with OH to generate COOH, which accounts for the improved CO tolerance of the PtSn alloy over pure Pt.

Enhanced Electrophoretic Depletion of Sodium Dodecyl Sulfate with Methanol for Membrane Proteome Analysis by Mass Spectrometry

Membrane proteins are underrepresented during proteome characterizations, primarily owing to their lower solubility. Sodium dodecyl sulfate (SDS) is favored to enhance protein solubility but interferes with downstream analysis by mass spectrometry. Here, we present an improved workflow for SDS depletion using transmembrane electrophoresis (TME) while retaining a higher recovery of membrane proteins. Though higher levels of organic solvent lower proteome solubility, we found that the inclusion of 40% methanol provided optimal solubility of membrane proteins, with 86% recovery relative to extraction with SDS. Incorporating 40% methanol during the electrophoretic depletion of SDS by TME also maximized membrane protein recovery. We further report that methanol accelerates the rate of detergent removal, allowing TME to deplete SDS below 100 ppm in under 3 min. This is attributed to a three-fold elevation in the critical micelle concentration (CMC) of SDS in the presence of methanol, combined with a reduction in the SDS to protein binding ratio in methanol (0.3 g SDS/g protein). MS analysis of membrane proteins isolated from the methanol-assisted workflow revealed enhanced proteome detection, particularly for proteins whose pI contributed a minimal net charge and therefore possessed reduced solubility in a purely aqueous solvent. This protocol presents a robust approach for the preparation of membrane proteins by maximizing their solubility in MS-compatible solvents, offering a tool to advance membrane proteome characterization.

Fomepizole use reported to United States Poison Centers from 2010 to 2021

BACKGROUND

The diagnosis of toxic alcohol poisoning is often based on clinical presentation and nonspecific surrogate laboratory studies due to limited testing availability. Fomepizole is the recommended antidote and often administered empirically. The objective of this study is to identify substances that mimic toxic alcohols and compare key clinical factors between toxic alcohol and non-toxic alcohol exposures when fomepizole was administered.

METHODS

This study was a retrospective evaluation using the National Poison Data System from January 1, 2010 through December 31, 2021. Exposures were included if fomepizole was administered. Toxic alcohol exposures had ethylene glycol or methanol as a coded substance. For exposures not coded as a toxic alcohol, the first substance was described. Paracetamol (acetaminophen) exposures from 2020 and 2021 were excluded.

RESULTS

Fomepizole was reportedly used 25,110 times over 12 years. Use increased from 1,955 in 2010 to 2,710 in 2021. Most administrations were for reported toxic alcohol poisoning (60 percent) but use in reported non-toxic alcohol poisoning was greater starting in 2020. Toxic alcohol exposures were older (43.3 versus 39.8 years; P < 0.001) and more likely male (65.7 percent versus 58.2 percent). Level of care was mostly a critical care unit (67.7 percent), which was less common in toxic alcohol (63.3 percent) than non-toxic alcohol exposures (74.2 percent). The most common non-toxic alcohol substances were ethanol (24.9 percent) or an unknown drug (17.5 percent). Acidosis, increased creatinine concentration, anion gap, and osmolal gap, and kidney failure were coded in a lower proportion of toxic alcohol exposures than non-toxic alcohol exposures (P < 0.001).

DISCUSSION

The inability to provide rapid clinical confirmation of toxic alcohol poisoning results in the empiric administration of fomepizole to many patients who will ultimately have other diagnoses. Although fomepizole is relative well tolerated we estimated that this practice costs between $1.5 to $2.5 million. The major limitations of this work include the biases associated with retrospective record review, and the inability to confirm the exposures which may have resulted in allocation error.

CONCLUSION

Most fomepizole use was for a presumed toxic alcohol. This recently shifted to greater use in likely non-toxic alcohol poisoning. Key difference between the groups suggest fomepizole administration was likely due to the difficulty in diagnosis of toxic alcohol poisoning along with the efficacy and safety of fomepizole. Increased toxic alcohol laboratory testing availability could improve timely diagnosis, reserving fomepizole use for toxic alcohol poisoning.

Nitrogen-Doped Titanium Dioxide for Selective Photocatalytic Oxidation of Methane to Oxygenates

Photocatalytic conversion of methane (CH4) to value-added chemicals using H2O as the oxidant under mild conditions is a desired sustainable pathway for synthesizing commodity chemicals. However, controlling product selectivity while maintaining high product yields is greatly challenging. Herein, we develop a highly efficient strategy, based on the precise control of the types of nitrogen dopants, and the design of photocatalysts, to achieve high selectivity and productivity of oxygenates via CH4 photocatalytic conversion. The primary product (methanol) is obtained in a high yield of 159.8 μmol·g-1·h-1 and 47.7% selectivity, and the selectivity of oxygenate compounds reached 92.5%. The unique hollow porous structure and substituted nitrogen sites of nitrogen-doped TiO2 synergistically promote its photo-oxidation performance. Furthermore, in situ attenuated total reflectance Fourier transform infrared spectroscopy provides direct evidence of the key intermediates and their evolution for producing methanol and multicarbon oxygenates. This study provides insights into the mechanism of photocatalytic CH4 conversion.

Unravelling CO2 Reduction Reaction Intermediates on High Entropy Alloy Catalysts: An Interpretable Machine Learning Approach to Establish Scaling Relations

Establishment of a scaling relation among the reaction intermediates is highly important but very much challenging on complex surfaces, such as surfaces of high entropy alloys (HEAs). Herein, we designed an interpretable machine learning (ML) approach to establish a scaling relation among CO2 reduction reaction (CO2 RR) intermediates adsorbed at the same adsorption site. Local Interpretable Model-Agnostic Explanations (LIME), Accumulated Local Effects (ALE), and Permutation Feature Importance (PFI) are used for the global and local interpretation of the utilized black box models. These methods were successfully applied through an iterative way and validated on CuCoNiZnMg and CuCoNiZnSnbased HEAs data. Finally, we successfully predicted adsorption energies of *H2 CO (MAE: 0.24 eV) and *H3 CO (MAE: 0.23 eV) by using the *HCO training data. Similarly, adsorption energy of *O (MAE: 0.32 eV) is also predicted from *H training data. We believe that our proposed method can shift the paradigm of state-of-the-art ML in catalysis towards better interpretability.

Water and Cu+ Synergy in Selective CO2 Hydrogenation to Methanol over Cu-MgO-Al2O3 Catalysts

The CO2 hydrogenation reaction to produce methanol holds great significance as it contributes to achieving a CO2-neutral economy. Previous research identified isolated Cu+ species doping the oxide surface of a Cu-MgO-Al2O3-mixed oxide derived from a hydrotalcite precursor as the active site in CO2 hydrogenation, stabilizing monodentate formate species as a crucial intermediate in methanol synthesis. In this work, we present a molecular-level understanding of how surface water and hydroxyl groups play a crucial role in facilitating spontaneous CO2 activation at Cu+ sites and the formation of monodentate formate species. Computational evidence has been experimentally validated by comparing the catalytic performance of the Cu-MgO-Al2O3 catalyst with hydroxyl groups against that of its hydrophobic counterpart, where hydroxyl groups are blocked using an esterification method. Our work highlights the synergistic effect between doped Cu+ ions and adjacent hydroxyl groups, both of which serve as key parameters in regulating methanol production via CO2 hydrogenation. By elucidating the specific roles of these components, we contribute to advancing our understanding of the underlying mechanisms and provide valuable insights for optimizing methanol synthesis processes.

Evaluation of the Hydrophilic/Hydrophobic Balance of 13X Zeolite by Adsorption of Water, Methanol, and Cyclohexane as Pure Vapors or as Mixtures

Adsorption isotherms of pure vapors and vapor mixtures of water, methanol, and cyclohexane were studied using a synthesized 13X zeolite (FAU topology), by means of a DVS gravimetric vapor analyzer. These results were validated by GCMC calculations. The surface chemistry of the adsorbent was characterized by the thermodesorption of ammonia, and its textural properties were studied using nitrogen physisorption. The 13X zeolite was found to be strongly acidic (BrØnsted acid sites, Si/Al = 1.3) and its specific surface area around 1100 m2·g-1. Water was found to be able to diffuse within both the supercages and the sodalite cavities of the FAU structure, whereas methanol and cyclohexane were confined in the supercages only. The water/methanol sorption selectivity of the 13X zeolite was demonstrated by co-adsorption measurements. The composition of the water/methanol adsorbed phase could be calculated by assuming IAST hypotheses. This model failed in the case of the water/cyclohexane co-adsorption system, which is in line with the non-miscibility of the components in the adsorbed state. The sorption isotherms could be successfully simulated, confirming the robustness of the forcefields used. The 13X zeolite confirmed its a priori expected hydrophilic nature, which is useful for the selective adsorption of water in a methanol-water vapor mixture.

Nicotiana benthamiana Methanol-Inducible Gene (MIG) 21 Encodes a Nucleolus-Localized Protein That Stimulates Viral Intercellular Transport and Downregulates Nuclear Import

The mechanical damage of plant tissues leads to the activation of methanol production and its release into the atmosphere. The gaseous methanol or vapors emitted by the damaged plant induce resistance in neighboring intact plants to bacterial pathogens but create favorable conditions for viral infection spread. Among the Nicotiana benthamiana methanol-inducible genes (MIGs), most are associated with plant defense and intercellular transport. Here, we characterize NbMIG21, which encodes a 209 aa protein (NbMIG21p) that does not share any homology with annotated proteins. NbMIG21p was demonstrated to contain a nucleolus localization signal (NoLS). Colocalization studies with fibrillarin and coilin, nucleolus and Cajal body marker proteins, revealed that NbMIG21p is distributed among these subnuclear structures. Our results show that recombinant NbMIG21 possesses DNA-binding properties. Similar to a gaseous methanol effect, an increased NbMIG21 expression leads to downregulation of the nuclear import of proteins with nuclear localization signals (NLSs), as was demonstrated with the GFP-NLS model protein. Moreover, upregulated NbMIG21 expression facilitates tobacco mosaic virus (TMV) intercellular transport and reproduction. We identified an NbMIG21 promoter (PrMIG21) and showed that it is methanol sensitive; thus, the induction of NbMIG21 mRNA accumulation occurs at the level of transcription. Our findings suggest that methanol-activated NbMIG21 might participate in creating favorable conditions for viral reproduction and spread.

Successful Cardiac, Lung, and Kidney Transplantation from a Methanol-poisoned Donor

Massive methanol exposure can lead to severe and detrimental effects that can result in death or brain death. As organs from patients with brain death after methanol ingestion are less likely to be recovered, these patients have been considered marginal donors. We present a case of successful multiple organ transplantation (heart, lungs, and kidneys) from a methanol-poisoned patient. Our experience illustrates that donor death from methanol intoxication does not preclude organ transplantation.

Antioxidant and Antineoplastic Activities of Hibiscus sabdariffa Linn. Petal Extracts against Oral Squamous Cell Carcinoma Cell Line

PURPOSE

To assess the antioxidant and antineoplastic effects of Hibiscus sabdariffa Linn. on oral squamous cell carcinoma cells.

MATERIALS AND METHODS

Human squamous cell carcinoma HSCC cells were tested for cytotoxicity by a methanol extract of Hibiscus sabdariffa (MEHSP). After 24, 48, and 72 h, the MTT assay and Trypan blue exclusion test were used to determine cell survival and death. 2, 2-diphenyl-1-picrylhydrazyl (DPPH), DNA Protection Assay (DPA), and ferric reducing antioxidant power assay (FRAPA) measured the antioxidant activity of MEHSP.

RESULTS

The antioxidant activity (%) ranged from 47.92-82.24 in the DPPH test, 11.61-73.65 in the DPA, and 4.97-52.09 in the FRAPA. The HSCC in-vitro cytotoxicity assay showed dose- and time-dependent cell viability. MEHSP at 5 μg/ml inhibited viable cells, while increasing MEHSP doses decreased cell viability. The Trypan blue exclusion test showed that MEHSP significantly reduced cell viability at 24, 48, and 72 h.

CONCLUSION

Hibiscus sabdariffa contains antioxidant and HSCC-cytotoxic properties.

Sustainable Electrochemical Benzylic C-H Oxidation Using MeOH as an Oxygen Source

New methods and strategies for the direct oxidation of benzylic C-H bonds are highly desirable, owing to the importance of ketone motifs in significant organic transformations and the synthesis of valuable molecules, including pharmaceuticals, pesticides, and fine chemicals. Herein, we describe an electrochemical benzylic C-H oxidation strategy for the synthesis of ketones using MeOH as an oxygen source. Inexpensive and safe KBr serves as both an electrolyte and a bromide radical precursor in the reaction. This transformation also offers several advantages such as mild conditions, broad functional group tolerance, and operational simplicity. Mechanistic investigations by control experiments, radical scavenging experiments, electron paramagnetic resonance (EPR), kinetic studies, cyclic voltammetry (CV), and in-situ Fourier transform infrared (FTIR) spectroscopy support a pathway involving the formation and transformation of benzyl methyl ether via hydrogen atom transfer (HAT) and single-electron transfer (SET). The practical application of our strategy is highlighted by the successful synthesis of five pharmaceuticals, namely lenperone, melperone, diphenhydramine, cinnarizine, and flunarizine.

Elastomer-Based Sealing O-Rings and Their Compatibility with Methanol, Ethanol, and Hydrotreated Vegetable Oil for Fueling Internal Combustion Engines

Green methanol, ethanol, and diesel-based hydrotreated vegetable oils are some of the renewable liquid fuels that show satisfactory performance in diesel engines. A notable advantage of these fuels is that they are renewable and do not require significant modifications in the existing engines for successful operation. Suitable fuel systems, especially their material compatibility, remain unresolved, and therefore, it is a weak link in their large-scale adaptation. Elastomer-based sealing O-rings lose their mechanical properties after a short exposure time to these fuels, adversely impacting their functionality. This research study evaluated the long-term material compatibility of different elastomer-based sealing materials by immersing the O-rings in these test fuels (hydrotreated vegetable oil, methanol, ethanol, and diesel) for different time intervals (i.e., up to 15 months). The material compatibility was assessed mainly by investigating these changes in various mechanical properties of these O-rings, namely tensile strength (ΔTs), elongation at break (ΔEb), Shore A hardness (ΔH), and mass (ΔM). The degradation of mechanical properties was studied and analyzed during the immersion interval from 0.9 to 15.2 months and compared with O-rings kept in a normal atmosphere. It was noted that individual fuels affect various mechanical properties significantly. In a short interval of 0.9 months (28 days), significant changes in the mechanical properties of the sealing O-rings were observed.

Study of the Ternary Mixture of Methanol/Formamide/Acetonitrile via Solvatochromic Probes

Following previous studies, the ternary mixture of methanol/formamide/acetonitrile (MeOH/Formamide/MeCN) was studied using the UV-Vis absorption spectra at 298.15 K with a set of five probes, 4-nitroaniline, 4-nitroanisole, 4-nitrophenol, N,N-dimethyl-4-nitroaniline and 2,6-diphenyl-4-(2,4,6-triphenyl-1-pyridinio)phenolate (Reichardt betaine dye), for a total of 22 mole ternary fractions. In addition, nine mole fractions of the underling binary mixtures, MeOH/Formamide and Formamide/MeCN were also tested. Spectroscopic results were used to model the preferential solvation order for each probe in the mixtures. The Kamlet-Taft solvatochromic solvent parameters, α, β, and π*, were also computed through the use of the solvatochromic shifts of the five probe indicators. Moreover, discrepancies in the spectroscopic behavior of 4-nitrophenol in formamide-rich mixtures were observed and analyzed.

Visual outcome of methanol toxic optic neuropathy after erythropoietin treatment in Riyadh, Saudi Arabia

PURPOSE

The purpose of this study is to evaluate the visual response of methanol-induced optic neuropathy to management with erythropoietin (EPO) along with conventional therapy.

METHODS

This retrospective case series examines the ophthalmological data of patients diagnosed with methanol-induced optic neuropathy between 2020 and 2021 at two centers, Riyadh, Saudi Arabia. Patients' characteristics and the results of initial and final ophthalmological examinations were documented and compared between patients who received EPO in addition to conventional management and those who received only conventional management.

RESULTS

A total of nine cases were reviewed, of which eight (88.9%) were males and one was female (11.1%). The mean age was 37.7 years. At presentation, funduscopic examination revealed optic disc edema in four eyes (two patients), and 14 eyes had normal appearance (seven patients). Among the nine patients who received conventional management, 5 (55.6%) additionally received intravenous EPO during the treatment course. There was no clinically or statistically significant difference in terms of visual outcome between the two groups. The mean visual acuity at the final presentation was 1.32 ± 0.79 logarithm of the minimum angle of resolution (LogMAR) in the EPO group and 1.36 ± 0.85 LogMAR in the non-EPO group. Optical coherence tomography indicated that the EPO group had an average retinal nerve fiber layer thickness of 48.13μm (±6.2), at the final assessment.

CONCLUSION

Managing the visual impairments in individuals with methanol-induced optic neuropathy using intravenous EPO resulted in similar final visual outcomes compared to conventional management.

Application of adaptive laboratory evolution to improve the tolerance of Rhodotorula strain to methanol in crude glycerol and development of an effective method for cell lysis

Rhodotorula toruloides can utilize crude glycerol as the low-cost carbon source for lipid production, but its growth is subjected to inhibition by methanol in crude glycerol. Here, transcriptome profiling demonstrated that 1004 genes were significantly regulated in the strain R. toruloides TO2 under methanol stress. Methanol impaired the function of membrane transport and subsequently weakened the utilization of glycerol, activities of the primary metabolism and functions of nucleus and ribosome. Afterwards the tolerance of TO2 to methanol was improved by using two-round adaptive laboratory evolution (ALE). The final strain M2-ale had tolerance up to 3.5% of methanol. 1 H NMR-based metabolome analysis indicated that ALE not only improved the tolerance of M2-ale to methanol but also tuned the carbon flux towards the biosynthesis of glycerolipid-related metabolites. The biomass and lipid titer of M2-ale reached 14.63 ± 0.45 g L-1 and 7.06 ± 0.44 g L-1 at 96 h in the crude glycerol medium, which increased up to 17.69% and 31.39%, respectively, comparing with TO2. Afterwards, an effective method for cell lysis was developed by combining sonication and enzymatic hydrolysis (So-EnH). The lytic effect of So-EnH was validated by using confocal imaging and flow cytometry. At last, lipid recovery rate reached 95.4 ± 2.7% at the optimized condition.

Sheet-Like Morphology CuO/Co3O4 Nanocomposites for Enhanced Catalysis in Hydrogenation of CO2 to Methanol

The selective hydrogenation of CO2 into high-value chemicals is an effective approach to address environmental issues. Cobalt-based catalysts have significant potential in CO2 hydrogenation reaction systems; however, there is a need to control their selectivity better. In this study, copper is introduced onto Co3O4 nanosheets using the ion exchange reverse loading method. The unique interaction of these materials significantly alters the selectivity of the cobalt-based catalyst. Results from scanning transmission electron microscopy and scanning electron microscopy indicate that this catalyst enables a more even dispersion of copper species in the Co3O4 nanosheets. Temperature-programmed reduction and X-ray photoelectron spectroscopy reveal that the catalyst facilitates the metal-metal interaction between Co and Cu. Temperature-programmed desorption experiments for CO2 and H2 demonstrate that the close interaction between Co and Cu modifies CO2 adsorption, leading to differences in catalytic activity. Moreover, the catalyst effectively suppresses CO2 methanation and promotes methanol formation by altering the alkalinity of the catalyst surface and weakening the hydrogen dissociation ability.

Al Promotion of In2O3 for CO2 Hydrogenation to Methanol

In2O3 is a promising catalyst for the hydrogenation of CO2 to methanol, relevant to renewable energy storage in chemicals. Herein, we investigated the promoting role of Al on In2O3 using flame spray pyrolysis to prepare a series of In2O3-Al2O3 samples in a single step (0-20 mol % Al). Al promoted the methanol yield, with an optimum being observed at an Al content of 5 mol %. Extensive characterization showed that Al can dope into the In2O3 lattice (maximum ∼ 1.2 mol %), leading to the formation of more oxygen vacancies involved in CO2 adsorption and methanol formation. The rest of Al is present as small Al2O3 domains at the In2O3 surface, blocking the active sites for CO2 hydrogenation and contributing to higher CO selectivity. At higher Al content (≥10 mol % Al), the particle size of In2O3 decreases due to the stabilizing effect of Al2O3. Nevertheless, these smaller particles are prone to sintering during CO2 hydrogenation since they appear to be more easily reduced. These findings show subtle effects of a structural promoter such as Al on the reducibility and texture of In2O3 as a CO2 hydrogenation catalyst.

Is optic nerve sheath diameter diagnostic in methanol intoxication?

BACKGROUND AND AIM

Methyl alcohol intoxication causes severe morbidity and mortality, especially in developing countries. Formic acid is formed as a result of methanol metabolism. Formic acid accumulation and inhibition of adenosine triphosphate synthesis result in ophthalmic issues. This study aimed to demonstrate that the optic nerve sheath diameter (ONSD) measurement is an accurate prognostic marker and can be helpful in the diagnosis of methanol intoxication.

MATERIALS AND METHODS

This prospective study was conducted with 52 patients who were admitted to the emergency department after alcohol consumption and agreed to participate in the study. Age, gender, comorbid diseases, vital signs, ONSD ultrasonography measurements, hospitalization and discharge status, in-hospital mortality status, dialysis need, presence of visual impairment, blood gas parameters, respiratory status, time since alcohol intake, ethanol levels, urea levels, and creatinine levels were analyzed.

RESULTS

ROC curve analysis was performed to evaluate the predictive power of ONSD to diagnose methanol intoxication. The area under the curve was 0.857 for the cut-off value of 5.05 mm (95 % CI: 0.728-0.985; p < 0.001), with a sensitivity of 80.8 % and a specificity of 100 %. In the regression analysis performed to determine the prognostic value of the parameters in estimating mortality in methanol intoxication cases, an increase in ONSD (OR: 3.619; 95 % CI: 0.057-0.199; p = 0.001), an increase in lactate levels (OR: 5.653; 95 % CI: 0.040-0.085; p < 0.001), and increased duration after alcohol intake (OR: 2558; 95 % CI: 0.004-0.034; p = 0.014) were identified as independent predictors of mortality, but pH, HCO3, and base deficit levels were not significant predictors.

CONCLUSIONS

We believe that ONSD can be helpful for the differential diagnosis and prognosis of patients with suspected methanol toxicity who presented with alcohol intake.

Size Effect of Cu Nanoparticles in Cu/g-C3N4 Composites on Properties for Highly Efficient Photocatalytic Reduction of CO2 to Methanol

The main goal of this work is to develop cheap photocatalysts for the efficient photocatalytic reduction of CO2 to methanol with water. A series of composites of Cu/g-C3N4 were prepared via a solvothermal method. Copper nanoparticle (Cu NP) size in Cu/g-C3N4 can be easily controlled by adjusting the synthesis temperature. The Cu/g-C3N4 material with the proper size of Cu NP (CuCN-100) had the best photocatalytic property (675 μmol·g-1·h-1) in reducing the amount of CO2 to methanol at room temperature under normal pressure. The particle size of Cu NPs is the key factor to improve the catalytic activity and stability because of the improved transfer and separation of photogenerated charges with the small Cu NPs. Although the sample with large Cu NPs (CuCN-200) initially gave a better activity than that of CuCN-100 due to the formation of double heterojunction, its activity was thoroughly lost after two runs resulting from the continuous photocorrosion. This work provides a valuable insight for preparing efficient semiconductor-metal photocatalysts.

Self-Supporting Triphase Photocatalytic CO2 Reduction to CH3OH on Controllable Core-Shell Structure with Tunable Interfacial Wettability

Enhancing the CO2 mass transfer and proton supply in the photocatalytic reduction of CO2 with H2O into CH3OH (PRC-M), while avoiding the hydrogen evolution reaction (HER), remains a challenge. Herein, we propose an approach to control the surface coverage of CO2 and H2O by modifying interfacial wettability, which is achieved by modulating the core-shell structure to expose either hydrophobic melamine-resorcinol-formaldehyde (MRF) or hydrophilic NiAl-layered double hydroxides (NAL). Characterizations reveal that an insufficient proton supply leads to the production of competing CO, while excessive coverage of H2O results in undesired HER. The NAL-MRF integrates hydrophobic and hydrophilic interfaces, contributing to the CO2 mass transfer and H2O adsorption, respectively. This combination forms a microreactor that facilitates the triphase photocatalysis of CO2, H2O, and catalyst, allowing for high local concentrations of both *CO and *H without competing binding sites. Importantly, the formation of covalent bonds and a Z-type heterojunction between hydrophilic NAL and hydrophobic MRF layers accelerates the charge separation. Furthermore, the density functional theory results indicate that the NAL linking promotes the continuous hydrogenation of *CO. As a result, an enhanced CH3OH yield of 31.41 μmol g-1 h-1, with selectivity of 93.62%, is achieved without hole scavengers or precious metals.

Effects of alcohol concentration and temperature on the dynamics and stability of mutant Staphylococcal lipase

The stability and activity of lipase in organic media are important parameters in determining how quickly biocatalysis proceeds. This study aimed to examine the effects of two commonly used alcohols in industrial applications, methanol (MtOH) and ethanol (EtOH) on the conformational stability and catalytic activity of G210C lipase, a laboratory-evolved mutant of Staphylococcus epidermidis AT2 lipase. Simulation studies were performed using an open-form predicted structure under 30, 40 and 50% of MtOH and EtOH at 25 °C and 45 °C. The overall enzyme structure becomes more flexible with increasing concentration of MtOH and exhibited the highest flexibility in 40% EtOH. In EtOH, the movement of the lid was found to be temperature-dependent with a noticeable shift in the lid position at 45 °C. Lid opening was evidenced at 50% of MtOH and EtOH which was supported by the increase in SASA of hydrophobic residues of the lid and catalytic triad. The active site remained mostly intact. An open-closed lid transition was observed when the structure was re-simulated in water. Experimental evaluation of the lipase stability showed that the half-life reduced when the enzyme was treated with 40% (v/v) and 50% (v/v) of EtOH and MtOH respectively. The finding implies that a high concentration of alcohol and elevated temperature can induce the lid opening of lipase which could be essential for the activation of the enzyme, provided that the catalytic performance in the active site is not compromised.Communicated by Ramaswamy H. Sarma.

The Use of a Droplet Collar Accessory Attached to a Portable near Infrared Instrument to Identify Methanol Contamination in Whisky

The aim of this study was to evaluate the ability of a droplet collar accessory attached to a portable near-infrared (NIR) instrument to characterize the artificial contamination of methanol in commercial whisky samples. Unadulterated samples (n = 12) were purchased from local bottle shops where adulterated samples were created by adding methanol (99% pure methanol) at six levels (0.5%, 1%, 2%, 3%, 4% and 5% v/v) to the commercial whisky samples (controls). Samples were analyzed using a drop collar accessory attached to a MicroNIR Onsite instrument (900-1650 nm). Partial least squares (PLS) cross-validation statistics obtained for the prediction of all levels of methanol (from 0 to 5%) addition were considered adequate when the whole adulteration range was used, coefficient of determination in cross-validation (R2cv: 0.95) and standard error in cross of validation (SECV: 0.35% v/v). The cross-validation statistics were R2cv: 0.97, SECV: 0.28% v/v after the 0.5% and 1% v/v methanol addition was removed. These results showed the ability of using a new sample presentation attachment to a portable NIR instrument to analyze the adulteration of whisky with methanol. However, the low levels of methanol adulteration (0.5 and 1%) were not well predicted using the NIR method evaluated.

Suppression of Methanol and Formate Crossover through Sulfanilic-Functionalized Holey Graphene as Proton Exchange Membranes

Proton exchange membranes with high proton conductivity and low crossover of fuel molecules are required to realize advanced fuel-cell technology. The selective transportation of protons, which occurs by blocking the transportation of fuel molecules across a proton exchange membrane, is crucial to suppress crossover while maintaining a high proton conductivity. In this study, a simple yet powerful method is proposed for optimizing the crossover-conductivity relationship by pasting sulfanilic-functionalized holey graphenes onto a Nafion membrane. The results show that the sulfanilic-functionalized holey graphenes supported by the membrane suppresses the crossover by 89% in methanol and 80% in formate compared with that in the self-assembled Nafion membrane; an ≈60% reduction is observed in the proton conductivity. This method exhibits the potential for application in advanced fuel cells that use methanol and formic acid as chemical fuels to achieve high energy efficiency.

Methanol diffusion and dynamics in zeolite H-ZSM-5 probed by quasi-elastic neutron scattering and classical molecular dynamics simulations

Zeolite ZSM-5 is a key catalyst in commercially relevant processes including the widely studied methanol to hydrocarbon reaction, and molecular diffusion in zeolite pores is known to be a crucial factor in controlling catalytic reactions. Here, we present critical analyses of recent quasi-elastic neutron scattering (QENS) data and complementary molecular dynamics (MD) simulations. The QENS experiments show that the nature of methanol diffusion dynamics in ZSM-5 pores is dependent both on the Si/Al ratio (11, 25, 36, 40 and 140), which determines the Brønsted acid site density of the zeolite, and that the nature of the type of motion observed may vary qualitatively over a relatively small temperature range. At 373 K, on increasing the ratio from 11 to 140, the observed mobile methanol fraction increases and the nature of methanol dynamics changes from rotational (in ZSM-5 with Si/Al of 11) to translational diffusion. The latter is either confined localized diffusion within a pore in zeolites with ratios up to 40 or non-localized, longer-range diffusion in zeolite samples with the ratio of 140. The complementary MD simulations conducted over long time scales (1 ns), which are longer than those measured in the present study by QENS (≈1-440 ps), at 373 K predict the occurrence of long-range translational diffusion of methanol in ZSM-5, independent of the Si/Al ratios (15, 47, 95, 191 and siliceous MFI). The rate of diffusion increases slightly by increasing the ratio from 15 to 95 and thereafter does not depend on zeolite composition. Discrepancies in the observed mobile methanol fraction between the MD simulations (100% methanol mobility in ZSM-5 pores across all Si/Al ratios) and QENS experiments (for example, ≈80% immobile methanol in ZSM-5 with Si/Al of 11) are attributed to the differences in time resolutions of the techniques. This perspective provides comprehensive information on the effect of acid site density on methanol dynamics in ZSM-5 pores and highlights the complementarity of QENS and MD, and their advantages and limitations. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Influence of the Mesoporosity of Hierarchical ZSM-5 in Toluene Alkylation by Methanol

Among the different strategies to design highly shape-selective ZSM-5 to obtain para-xylene through toluene alkylation with methanol, the introduction of mesopores to increase reactant and product diffusion has been proposed but barely studied. In this study, we prepared mesoporous ZSM-5 catalysts, named ZSM5-MT(x), from commercial ZSM-5 (Si/Al = 15), using a two-step micelle-templating procedure with octadecyltrimethylammonium bromide as a surfactant in basic medium (x = NaOH/Si). These materials were used as catalysts for the alkylation of toluene by methanol at a low contact time to avoid thermodynamic equilibrium of the xylene isomers. Compared to the parent ZSM-5, the mesoporous ZSM5-MT(x) catalysts did not improve the para-xylene selectivity, revealing that the strategy of increasing diffusion in the catalyst is not a good strategy to follow. However, ZSM5-MT(0.5) showed less deactivation on stream than the parent ZSM-5. Therefore, introducing mesopores to ZSM-5 could be interesting to explore, combined with another strategy of shape selectivity, such as the passivation of the external surface acidity.

Genomic potential and physiological characteristics of C1 metabolism in novel acetogenic bacteria

Acetogenic bacteria can utilize C1 compounds, such as carbon monoxide (CO), formate, and methanol, via the Wood-Ljungdahl pathway (WLP) to produce biofuels and biochemicals. Two novel acetogenic bacteria of the family Eubacteriaceae ES2 and ES3 were isolated from Eulsukdo, a delta island in South Korea. We conducted whole genome sequencing of the ES strains and comparative genome analysis on the core clusters of WLP with Acetobacterium woodii DSM1030T and Eubacterium limosum ATCC8486T. The methyl-branch cluster included a formate transporter and duplicates or triplicates copies of the fhs gene, which encodes formyl-tetrahydrofolate synthetase. The formate dehydrogenase cluster did not include the hydrogenase gene, which might be replaced by a functional complex with a separate electron bifurcating hydrogenase (HytABCDE). Additionally, duplicated copies of the acsB gene, encoding acetyl-CoA synthase, are located within or close to the carbonyl-branch cluster. The serum bottle culture showed that ES strains can utilize a diverse range of C1 compounds, including CO, formate, and methanol, as well as CO2. Notably, ES2 exhibited remarkable resistance to high concentrations of C1 substrates, such as 100% CO (200 kPa), 700 mM formate, and 500 mM methanol. Moreover, ES2 demonstrated remarkable growth rates under 50% CO (0.45 h-1) and 200 mM formate (0.34 h-1). These growth rates are comparable to or surpassing those previously reported in other acetogenic bacteria. Our study introduces novel acetogenic ES strains and describes their genetic and physiological characteristics, which can be utilized in C1-based biomanufacturing.

Artificial intelligence and internet of things oriented sustainable precision farming: Towards modern agriculture

Agriculture encompasses the study, practice, and discipline of plant cultivation. Agriculture has an extensive history dating back thousands of years. Depending on climate and terrain, it began independently in various locations on the planet. In comparison to what could be sustained by foraging and gathering, agriculture has the potential to significantly increase the human population. Throughout the twenty-first century, precision farming (PF) has increased the agricultural output. precision agriculture (PA) is a technology-enabled method of agriculture that assesses, monitors, and evaluates the needs of specific fields and commodities. The primary objective of this farming method, as opposed to conventional farming, is to increase crop yields and profitability through the precise application of inputs. This work describes in depth the development and function of artificial intelligence (AI) and the internet of things (IoT) in contemporary agriculture. Modern day-to-day applications rely extensively on AI and the IoT. Modern agriculture leverages AI and IoT for technological advancement. This improves the accuracy and profitability of modern agriculture. The use of AI and IoT in modern smart precision agricultural applications is highlighted in this work and the method proposed incorporates specific steps in PF and demonstrates superior performance compared to existing classification methods. It achieves a remarkable accuracy of 98.65%, precision of 98.32%, and recall rate of 97.65% while retaining competitive execution time of 0.23 s, when analysing PF using the FAOSTAT benchmark dataset. Additionally, crucial equipment and methods used in PF are described and the vital advantages and real-time tools utilised in PA are covered in detail.

Metabolism-linked methylotaxis sensors responsible for plant colonization in Methylobacterium aquaticum strain 22A

Motile bacteria take a competitive advantage in colonization of plant surfaces to establish beneficial associations that eventually support plant health. Plant exudates serve not only as primary growth substrates for bacteria but also as bacterial chemotaxis attractants. A number of plant-derived compounds and corresponding chemotaxis sensors have been documented, however, the sensors for methanol, one of the major volatile compounds released by plants, have not been identified. Methylobacterium species are ubiquitous plant surface-symbiotic, methylotrophic bacteria. A plant-growth promoting bacterium, M. aquaticum strain 22A exhibits chemotaxis toward methanol (methylotaxis). Its genome encodes 52 methyl-accepting chemotaxis proteins (MCPs), among which we identified three MCPs (methylotaxis proteins, MtpA, MtpB, and MtpC) responsible for methylotaxis. The triple gene mutant of the MCPs exhibited no methylotaxis, slower gathering to plant tissues, and less efficient colonization on plants than the wild type, suggesting that the methylotaxis mediates initiation of plant-Methylobacterium symbiosis and engages in proliferation on plants. To examine how these MCPs are operating methylotaxis, we generated multiple gene knockouts of the MCPs, and Ca2+-dependent MxaFI and lanthanide (Ln3+)-dependent XoxF methanol dehydrogenases (MDHs), whose expression is regulated by the presence of Ln3+. MtpA was found to be a cytosolic sensor that conducts formaldehyde taxis (formtaxis), as well as methylotaxis when MDHs generate formaldehyde. MtpB contained a dCache domain and exhibited differential cellular localization in response to La3+. MtpB expression was induced by La3+, and its activity required XoxF1. MtpC exhibited typical cell pole localization, required MxaFI activity, and was regulated under MxbDM that is also required for MxaF expression. Strain 22A methylotaxis is realized by three independent MCPs, two of which monitor methanol oxidation by Ln3+-regulated MDHs, and one of which monitors the common methanol oxidation product, formaldehyde. We propose that methanol metabolism-linked chemotaxis is the key factor for the efficient colonization of Methylobacterium on plants.

Evaluation of the Reactivity of Methanol and Hydrogen Sulfide Residues with the Ziegler-Natta Catalyst during Polypropylene Synthesis and Its Effects on Polymer Properties

The study focused on the evaluation of the influence of inhibitory compounds such as hydrogen sulfide (H2S) and methanol (CH3OH) on the catalytic productivity and properties of the polymers in the polymerization process with the Ziegler-Natta catalyst. The investigation involved experimental measurements, computational calculations using DFT, and analysis of various parameters, such as molecular weight, melt flow index, xylene solubility, and reactivity descriptors. The results revealed a clear correlation between the concentration of H2S and methanol and the parameters evaluated. Increasing the H2S concentrations, on average by 0.5 and 1.0 ppm, resulted in a drastic decrease in the polymer's molecular weight. A directly proportional relationship was observed between the flow rate and the H2S concentration. In the case of methanol, the change occurred from 60 ppm, causing a sharp decrease in the molecular weight of the polymer, which translates into an increase in the fluidity index and a decrease in solubility in xylene. The presence of these inhibitors also affected the catalytic activity, causing a reduction in the productivity of the Ziegler-Natta catalyst. Computational calculations provided a deeper understanding of the molecular behavior and reactivity of the studied compounds. The computational calculations yielded significantly lower results compared to other studies, with values of -69.0 and -43.9 kcal/mol for the Ti-CH3OH and H2S interactions, respectively. These results indicate remarkable stability in the studied interactions and suggest that both adsorptions are highly favorable.

Development of Different Kinds of Electrocatalyst for the Electrochemical Reduction of Carbon Dioxide Reactions: An Overview

Significant advancements have been made in the development of CO2 reduction processes for applications such as electrosynthesis, energy storage, and environmental remediation. Several materials have demonstrated great potential in achieving high activity and selectivity for the desired reduction products. Nevertheless, these advancements have primarily been limited to small-scale laboratory settings, and the considerable technical obstacles associated with large-scale CO2 reduction have not received sufficient attention. Many of the researchers have been faced with persistent challenges in the catalytic process, primarily stemming from the low Faraday efficiency, high overpotential, and low limiting current density observed in the production of the desired target product. The highlighted materials possess the capability to transform CO2 into various oxygenates, including ethanol, methanol, and formates, as well as hydrocarbons such as methane and ethane. A comprehensive summary of the recent research progress on these discussed types of electrocatalysts is provided, highlighting the detailed examination of their electrocatalytic activity enhancement strategies. This serves as a valuable reference for the development of highly efficient electrocatalysts with different orientations. This review encompasses the latest developments in catalyst materials and cell designs, presenting the leading materials utilized for the conversion of CO2 into various valuable products. Corresponding designs of cells and reactors are also included to provide a comprehensive overview of the advancements in this field.