Morphological and electrochemical properties of PPy, PAni bilayer films and enhanced stability of their electrochromic devices (PPy/PAni–PEDOT, PAni/PPy–PEDOT)

Sustainable core-shell structures derived from lignin for Na ion batteries

The aromatic nature of the structure of lignin enables its use as a natural and sustainable hard carbon precursor. Upon carbonisation, lignin-derived hard carbon has shown potential as a sodium-ion battery anode. In this study, we have utilised coaxial electrospinning to produce nanofibers, which undergo stabilisation and carbonisation, to analyse the influence of carbon morphology on sodium-ion storage mechanisms. Various nanostructures have been tailored to produce intricate core/shell structures with varying degrees of porosity to allow controlled Na diffusion and storage. The morphology of these unique high surface area nanostructures has been assessed by scanning electron microscopy. The optimized Core-Shell structure shows a specific capacity of 184.7mAh g-1, with 99.7 % of coulombic efficiency. This innovative and green approach enables new strategies to obtain sustainable materials for sodium ion energy storage applications.

Electrode Materials for Flexible Electrochromics

Flexible electrochromic devices (ECDs) represent a distinctive category in optoelectronics, leveraging advanced materials to achieve tunable coloration under applied electric voltage. This review delves into recent advancements in electrode materials for ECDs, with a focus on silver nanowires, metal meshes, conductive polymers, carbon nanotubes, and transparent conductive ceramics. Each material is evaluated based on its manufacturing methods and integration potential. The analysis highlights the prominent role of transparent conductive ceramics and conductive polymers due to their versatility and scalability, while also addressing challenges such as environmental stability and production costs. Use of other alternative materials, such as metal meshes, carbon materials, nanowires and others, are presented here as a comparison as well. Emerging hybrid systems and advanced coating techniques are identified as promising solutions to overcome limitations regarding flexibility and durability. This review underscores the critical importance of electrode innovation in enhancing the performance, sustainability, and application scope of flexible ECDs for next-generation technologies.

Fabrication and Performance Evaluation of a Nanostructured ZnO-Based Solid-State Electrochromic Device

In this study, we present an all-solid-state electrochromic device (ECD) that eliminates the need for hard-to-obtain materials and conventional liquid/gel electrolytes. Using a cost-effective and industrially scalable spray coating technique, we developed an ECD containing a layer of zinc oxide nanorods (ZnOnano) synthesized via a simple solochemical route. The device configuration includes a preformed Al-coated glass substrate, acting as a counter electrode, within a glass/Al/ZnOnano/PEDOT:PSS architecture. The device exhibits reversible switching between light blue and dark blue states upon application of -1.2 V and +2.8 V, respectively, with a significant difference in transmittance between bleached and colored states in the visible-NIR spectrum, featuring a high coloration efficiency of 275.62 cm2/C at 600 nm. The response times required for both coloring and bleaching states were 9.92 s and 7.51 s, respectively, for a sample with an active area of 5.5 × 2.5 cm2. Regarding the electrochemical stability of the ZnO-based ECD, the transmittance modulation reached around 8.01% at 600 nm after 12,800 s, following initial variations observed during the first 10 cycles. These results represent significant progress in electrochromic technology, offering a sustainable and efficient alternative to traditional ECDs. The use of economical fabrication techniques and the exclusion of critical materials highlight the potential for widespread industrial adoption of this novel ECD design.

Design and development of symmetric aromatic bischalcogenide-based photocatalysts for water treatment application: a concise study of diphenyl diselenide polypyrrole nanocatalysis

Dopant engineering can be a very selective approach in designing hybrid materials. Incorporating the required functionality in a dopant effectively modulates its properties towards aimed applications. Consequently, this work through a comparative study envisaged the incorporation of chalcogenides (S, Se, and Te) in a biphenyl motif based on the analysis of major photocatalytic descriptors. Bischalcogenides as tuned dopants have been impressive in enhancing the surface area, increasing crystallinity and facilitating band gap shifts towards better light harvesting. In addition, the chalcogen effect was observed to induce preferential ion migration, leading to effective charge separation and attenuated recombination rates. Photocatalytic descriptors evaluated from electrochemical impedance spectroscopy and photoluminescence data corroborated the chalcogen effect in the observed trend (Ph)2 < (PhS)2 < (PhSe)2 < (PhTe)2. The diphenyl diselenide polypyrrole nanocomposite emerged to be better among the studied systems. (PhSe)2/PPY was characterized and comprehensively evaluated for its photocatalytic activity towards varied dye classes and the colorless isoniazid antibiotic under environmentally viable conditions. Its calculated band potential values and scavenger experiments indicate OH˙ and O2 ˙- as dominant species in its photocatalytic activity. Control experiments confirmed photocatalytic degradation over photolysis as the dye decolouration mechanism. Taken together, (PhSe)2/PPY emerges as a good propensity photocatalyst worthy of real time customization for wastewater treatment on a pilot scale.

Understanding the Effect of Deposition Technique on the Structure-Property Relationship of Polyaniline Thin Films Applied in Potentiometric pH Sensor

The comprehension of potentiometric pH sensors with polymeric thin films for new and advanced applications is a constant technological need. The present study aimed to explore the relationship between the sensitivity and correlation coefficient of potentiometric pH sensors and the structure-property relationship of polyaniline thin films. The effect of the deposition method on the sample's properties was evaluated. Galvanostatically electrodeposited and spin-coated polyaniline thin films were used as the sensing stage. Samples were electrodeposited with a current density of 0.5 mA/cm2 for 300, 600, and 1200 s and were spin coated for 60 s with an angular velocity of 500, 1000, and 2000 rpm. The electrodeposited set of films presented higher average sensitivity, 73.4 ± 1.3 mV/pH, compared to the spin-coated set, 59.2 ± 2.5 mV/pH. The electrodeposited films presented higher sensitivity due to their morphology, characterized by a larger roughness and thickness compared to spin-coated ones, favoring the potentiometric response. Also, their oxidation state, evaluated with cyclic voltammetry and UV-VIS spectroscopy, corroborates their sensing performance. The understanding of the structure-property relationship of the polymeric films affecting the pH detection is discussed based on the characteristics of the deposition method used.

Functionalisation of Electrospun Cellulose Acetate Membranes with PEDOT and PPy for Electronic Controlled Drug Release

Controlled drug release via electrical stimulation from drug-impregnated fibres was studied using electrospun cellulose acetate (CA) membranes and encapsulated ibuprofen (IBU). This research outlines the influence of polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene) (PEDOT)-functionalised CA membranes and their suitability for dermal electronic-controlled drug release. Micro Raman analysis confirmed polymer functionalisation of CA membranes and drug incorporation. Scanning electron microscopy (SEM) images evidenced the presence of PPy and PEDOT coatings. The kinetic of drug release was analysed, and the passive and active release was compared. In the proposed systems, the drug release is controlled by very low electrical potentials. A potential of -0.3 V applied to membranes showed the ibuprofen retention, and a positive potential of +0.3 V, +0.5 V, or +0.8 V, depending on the conductive polymer and membrane configuration, enhanced the drug release. A small adhesive patch was constructed to validate this system for cutaneous application and verified an "ON/OFF" ibuprofen release pattern from membranes.

Spectroelectrochemistry of Electroactive Polymer Composite Materials

In this review, we have summarized the main advantages of the method of spectroelectrochemistry as applied to recent studies on electrosynthesis and redox processes of electroactive polymer composite materials, which have found wide application in designing organic optoelectronic devices, batteries and sensors. These polymer composites include electroactive polymer complexes with large unmovable dopant anions such as polymer electrolytes, organic dyes, cyclodextrins, poly(β-hydroxyethers), as well as polymer-inorganic nanocomposites. The spectroelectrochemical methods reviewed include in situ electron absorption, Raman, infrared and electron spin resonance spectroscopies.

Electrochemical Investigation of PANI:PPy/AC and PANI:PEDOT/AC Composites as Electrode Materials in Supercapacitors

The electrochemical deposition of the composites polyaniline (PANI):polypyrrole (PPy)/activated carbon (AC) and polyaniline (PANI): 3, 4-polyethylenedioxythiophene (PEDOT)/AC films is carried out in this work. The electrochemical character of the fabricated samples is investigated via cyclic voltammetry (CV), galvanostatic charge–discharge (GCD) and electrochemical impedance spectroscopy (EIS) using a three-electrode setup. The values of the specific capacitance of the composites PANI:PPy/AC and PANI:PEDOT/AC at a current density of 1 Ag⁻¹ are evaluated as 586 Fg⁻¹ and 611 Fg⁻¹, respectively. The values of energy density are 40 Whkg⁻¹ and 2094 Wkg⁻¹, whereas power density is recorded as 44 Whkg⁻¹ and 2160 Wkg⁻¹ for respective composites PANI:PPy/AC and PANI:PEDOT/AC. Moreover, the respective composites appeared to retain cyclic stabilities of 92% and 90%. This study points to the potential of the prepared composites for application as electrodes in supercapacitors.

Nanostructured TiO2 and PEDOT Electrodes with Photovoltaic Application

In this work, nanostructured TiO₂ and poly-3,4-ethylenedioxythiophene (PEDOT) layers were electrochemically prepared over transparent electrodes. Morphological characterization evidenced the presence of nanostructures as planed with 50-nm-wide TiO₂ rod formations followed by 30-nm-wide PEDOT wires. Different characterizations were made to the deposits, establishing their composition and optic properties of the deposits. Finally, photovoltaic cells were prepared using this modified electrode, proving that the presence of PEDOT nanowires in the cell achieves almost double the efficiency of its bulk analogue.

Cr2S3(Et2DTC) complex and [Cr2S3-MoS2(Et2DTC)] bilayer thin films: single source stationed fabrication, compositional, optical, microstructural and electrochemical investigation

Current investigation has for the first time synthesized chromium sulphide diethyldithiocarbamate [Cr₂S₃(Et₂DTC)] complex utilizing diethyldithiocarbamate (DDTC) utilizing single source precursor method. Thin films of bilayer chromium sulphide diethyldithiocarmate and molybdenum disulphide [Cr₂S₃-MoS₂(Et₂DTC)] were deposited on the fluorine doped tin oxide (FTO) substrate by physical vapour deposition (PVD). Synthesized complex and bilayer were characterized by Xray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible spectrophotometry (UV-Vis), and scanning electron microscopy (SEM) for exploration of the compositional, optical, crystalline and morphological parameters, respectively. FT-IR peaks expressed the chelation of [Cr₂S₃(Et₂DTC)] expressing interactions between chromium sulphide and the ligand. The band gaps obtained from Tauc plot were 3.89 (direct) and 3.38 eV (indirect), respectively for Cr₂S₃(Et₂DTC) complex. The direct and indirect band gap of 3.75 and 3.35 eV, respectively, were obtained for [Cr₂S₃-MoS₂(Et₂DTC)] bilayer thin films. Average crystallite size of 13 (hexagonal orientation) and 13.4 (orthorhombic orientation) nm and for Cr₂S₃(Et₂DTC) complex and [Cr₂S₃-MoS₂(Et₂DTC)] bilayer thin films expressed from XRD. SEM micrographs expressed cannular and rod protrusions for Cr₂S₃-DDTC complex and smoother and unvarnished surficial characteristics for [Cr₂S₃-MoS₂(Et₂DTC)] bilayer thin films corresponding to compactness and uniformity of the films. Furthermore, [Cr₂S₃-MoS₂(Et₂DTC)] also expressed remarkable electrochemical aspects of the current generation and operational stability of analysed through 5760 s at 100 mA analysed via linear sweep voltammetry and chronoamperometry. The fabricated films can be efficiently used in optoelectronic devices. Current work can be extended to the optimization of bilayer thin films fabrication for achieving an alleviation in the band gaps.

Enhanced Photocatalytic Hydrogen Production of the Polyoxoniobate Modified with RGO and PPy

The development of high-efficiency, recyclable, and inexpensive photocatalysts for water splitting for hydrogen production is of great significance to the application of solar energy. Herein, a series of graphene-decorated polyoxoniobate photocatalysts Nb₆/PPy-RGO (Nb₆ = K₇HNb₆O₁₉, RGO = reduced graphene oxide, PPy = polypyrrole), with the bridging effect of polypyrrole were prepared through a simple one-step solvothermal method, which is the first example of polyoxoniobate-graphene-based nanocomposites. The as-fabricated photocatalyst showed a photocatalytic H₂ evolution activity without any co-catalyst. The rate of 1038 µmol g⁻¹ in 5 h under optimal condition is almost 43 times higher than that of pure K₇HNb₆O₁₉·13H₂O. The influencing factors for photocatalysts in photocatalytic hydrogen production under simulated sunlight were studied in detail and the feasible mechanism is presented in this paper. These results demonstrate that Nb₆O₁₉ acts as the main catalyst and electron donor, RGO provides active sites, and PPy acted as an electronic bridge to extend the lifetime of photo-generated carriers, which are crucial factors for photocatalytic H₂ production.

Characterization of nano-layered solid-contact ion selective electrodes by simultaneous potentiometry and quartz crystal microbalance with dissipation

Nano-layered solid-contact potassium-selective electrodes (K⁺-ISEs) were explored as model ion-selective electrodes for their practical use in clinical analysis. The ultra-thin ISEs ought to be manufactured in a highly reproducible manner, potentially making them suitable for mass production. Thus, their development is pivotal towards miniaturised sensors with simplified conditioning/calibration protocols for point-of-care diagnostics. To study nano-layered ISEs, the ultra-thin nature of ISEs for the first time enabled to combine potentiometry-quartz crystal microbalance with dissipation (QCM-D) to obtain value-added information on the ISE potentiometric response regarding their physical state such as mass/thickness/viscoelastic properties/structural homogeneity. Specifically, the studies were focused on real-time observations of the ISE potentiometric response in relation to changes of their physicochemical properties during the ISE preparation (conditioning) and operation (including biofouling conditions) to identify the occurring processes that may accordingly be critical for potential instability of the ISEs, impeding their practical application. The K⁺-ISEs were prepared on a QCM-D gold sensor by electrodepositing poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) layer serving as an ion-to-electron transducer subsequently covered by a spin-coated poly(vinyl chloride) based K⁺-ion selective membrane (K⁺-ISM). The studies demonstrated that the performance of the nano-layered design of K⁺-ISEs is detrimentally affected by such processes as water layer formation accordingly causing the instability of the electrode potential. The changes in the ISE physical state such mass/viscoelastic properties associated with water layer formation and origin of the potential instability was already observed at the ISE conditioning stage. The potential instability of nano-layered ISEs limits their practical applicability, indicating the need of new solutions in designing ISEs, for instance, exploiting new water-resistant materials and modifying preparation protocols.

Self-supported one-dimensional materials for enhanced electrochromism

A reversible, persistent electrochromic change in color or optical parameter controlled by a temporarily applied electrical voltage is attractive because of its enormous display and energy-related applications. Due to the electrochemical and structural advantages, electrodes based on self-supported one-dimensional (1D) nanostructured materials have become increasingly important, and their impacts are particularly significant when considering the ease of assembly of electrochromic devices. This review describes recent advances in the development of self-supported 1D nanostructured materials as electrodes for enhanced electrochromism. Current strategies for the design and morphology control of self-supported electrodes fabricated using templates, anodization, vapor deposition, and solution techniques are outlined along with demonstrating the influences of nanostructures and components on the electrochemical redox kinetics and electrochromic performance. The applications of self-supported 1D nanomaterials in the emerging bifunctional devices are further illustrated.

High-Performance Electrochromic Devices Based on Poly[Ni(salen)]-Type Polymer Films

We report the application of two poly[Ni(salen)]-type electroactive polymer films as new electrochromic materials. The two films, poly[Ni(3-Mesalen)] (poly[1]) and poly[Ni(3-MesaltMe)] (poly[2]), were successfully electrodeposited onto ITO/PET flexible substrates, and their voltammetric characterization revealed that poly[1] showed similar redox profiles in LiClO4/CH3CN and LiClO4/propylene carbonate (PC), while poly[2] showed solvent-dependent electrochemical responses. Both films showed multielectrochromic behavior, exhibiting yellow, green, and russet colors according to their oxidation state, and promising electrochromic properties with high electrochemical stability in LiClO4/PC supporting electrolyte. In particular, poly[1] exhibited a very good electrochemical stability, changing color between yellow and green (λ = 750 nm) during 9000 redox cycles, with a charge loss of 34.3%, an optical contrast of ΔT = 26.2%, and an optical density of ΔOD = 0.49, with a coloration efficiency of η = 75.55 cm(2) C(-1). On the other hand, poly[2] showed good optical contrast for the color change from green to russet (ΔT = 58.5%), although with moderate electrochemical stability. Finally, poly[1] was used to fabricate a solid-state electrochromic device using lateral configuration with two figures of merit: a simple shape (typology 1) and a butterfly shape (typology 2); typology 1 showed the best performance with optical contrast ΔT = 88.7% (at λ = 750 nm), coloration efficiency η = 130.4 cm(2) C(-1), and charge loss of 37.0% upon 3000 redox cycles.

Electrochromic/supercapacitive dual functional fibres

Wearable electronics have shown great potential to improve our lifestyle and health.

Synthesis of new 2,5-di(thiophen-2-yl)furan-3-carbonitrile derivatives and investigation of the electrochromic properties of homopolymers and co-polymers with EDOT

New thiophene–furan–thiophene type monomers were synthesized. The monomers and their copolymers with EDOT were electrochemically polymerized. The electrochemical, spectroelectrochemical and morphological properties of the films were investigated.