Supported PtAu catalysts with different nano-structures for ethanol electrooxidation

Thermally Induced Surface Structure and Morphology Evolution in Bimetallic Pt-Au/HOPG Nanoparticles as Probed Using XPS and STM

Bimetallic nanoparticles expand the possibilities of catalyst design, providing an extra degree of freedom for tailoring the catalyst structure in comparison to purely monometallic systems. The distribution mode of two metal species defines the structure of surface catalytic sites, and current research efforts are focused on the development of methods for their controlled tuning. In light of this, a comprehensive investigation of the factors which influence the changes in the morphology of bimetallic nanoparticles, including the elemental redistribution, are mandatory for each particular bimetallic system. Here we present the combined XPS/STM study of the surface structure and morphology of bimetallic Pt-Au/HOPG nanoparticles prepared by thermal vacuum deposition and show that thermal annealing up to 350 °C induces the alloying process between the two bulk-immiscible metal components. Increasing the treatment temperature enhances the extent of Pt-Au alloying. However, the sintering of nanoparticles starts to occur above 500 °C. The approach implemented in this work includes the theoretical simulation of XPS signal intensities for a more meticulous analysis of the compositional distribution and can be helpful from a methodological perspective for other XPS/STM studies of bimetallic nanoparticles on planar supports.

Au/Pt Bimetallic Nanowires with Stepped Pt Sites for Enhanced C-C Cleavage in C2+ Alcohol Electro-oxidation Reactions

Efficient C-C bond cleavage and oxidation of alcohols to CO2 is the key to developing highly efficient alcohol fuel cells for renewable energy applications. In this work, we report the synthesis of core/shell Au/Pt nanowires (NWs) with stepped Pt clusters deposited along the ultrathin (2.3 nm) stepped Au NWs as an active catalyst to effectively oxidize alcohols to CO2. The catalytic oxidation reaction is dependent on the Au/Pt ratios, and the Au1.0/Pt0.2 NWs have the largest percentage (∼75%) of stepped Au/Pt sites and show the highest activity for ethanol electro-oxidation, reaching an unprecedented 196.9 A/mgPt (32.5 A/mgPt+Au). This NW catalyst is also active in catalyzing the oxidation of other primary alcohols, such as methanol, n-propanol, and ethylene glycol. In situ X-ray absorption spectroscopy and infrared spectroscopy are used to characterize the catalyst structure and to identify key reaction intermediates, providing concrete evidence that the synergy between the low-coordinated Pt sites and the stepped Au NWs is essential to catalyze the alcohol oxidation reaction, which is further supported by DFT calculations that the C-C bond cleavage is indeed enhanced on the undercoordinated Pt-Au surface. Our study provides important evidence that a core/shell structure with stepped core/shell sites is essential to enhance electrochemical oxidation of alcohols and will also be central to understanding electro-oxidation reactions and to the future development of highly efficient direct alcohol fuel cells for renewable energy applications.

In-Situ surface enhanced infrared absorption spectroscopy study of electrocatalytic oxidation of ethanol on Platinum/Gold surface

The behavior of ethanol oxidation reaction on composite electrodes prepared by deposition platinum on a gold surface (Pt/Au) were studied by cyclic voltammetry and surface enhanced infrared absorption spectroscopy (SEIRAS) analysis. The results show that the Pt electrode has high oxidation activity and significant poison behavior; on the contrary, the Au electrode demonstrates low activity without a poison peak. The SEIRAS analyses reveal that both carbon monoxide (CO) and carbon dioxide (CO₂) appear during anode sweeping, and the CO peak density decreases with increasing potential and finally is eliminated. During the cathodic scanning, the CO peak reappears, and the peak intensity increases with scanning cycles, demonstrating a high poison behavior and the C1 reaction route on Pt. On the Au electrode, CO₂ and CO peaks were not observed; instead, an acetic acid peak appeared, indicating a C2 reaction path. For the Pt/Au composited electrodes, the electrochemical activities of the electrodes, as well as their poison behavior, increased with the deposition amount of Pt. However, the intensities of the poison peaks are smaller than those of oxidation ones; therefore, a higher tolerance to the CO poison can be achieved. For the 2 m-Pt/Au composite electrode, the activity is close to that of pure Pt, but the poison tolerance is 3 times the value of Pt.

Electrocatalysis of gold-based nanoparticles and nanoclusters

Gold (Au)-based nanomaterials, including nanoparticles (NPs) and nanoclusters (NCs), have shown great potential in many electrocatalytic reactions due to their excellent catalytic ability and selectivity. In recent years, Au-based nanostructured materials have been considered as one of the most promising non-platinum (Pt) electrocatalysts. The controlled synthesis of Au-based NPs and NCs and the delicate microstructure adjustment play a vital role in regulating their catalytic activity toward various reactions. This review focuses on the latest progress in the synthesis of efficient Au-based NP and NC electrocatalysts, highlighting the relationship between Au nanostructures and their catalytic activity. This review first discusses the parameters of Au-based nanomaterials that determine their electrocatalytic performance, including composition, particle size and architecture. Subsequently, the latest electrocatalytic applications of Au-based NPs and NCs in various reactions are provided. Finally, some challenges and opportunities are highlighted, which will guide the rational design of Au-based NPs and NCs as promising electrocatalysts.

C2 Alcohol Oxidation Boosted by Trimetallic PtPbBi Hexagonal Nanoplates

The exploration of ternary Pt-based catalysts represents a new trend for the application of electrocatalysts in fuel cells. In the present study, intermetallic PtPbBi hexagonal nanoplates (HNPs) with a hexagonal close-packed structure have been successfully synthesized via a facile solvothermal synthesis approach. The optimized PtPbBi HNPs exhibited excellent mass activity in the ethanol oxidation reaction (8870 mA mg^-1_Pt) in an alkaline ethanol solution, which is 12.7 times higher than that of JM Pt/C. Meanwhile, the mass activity of PtPbBi HNPs in an ethylene glycol solution (10,225 mA mg^-1_Pt) is 1.85 times higher than that of JM Pt/C. In particular, its catalytic activity is better than that of most reported Pt-based catalysts. In addition, the optimized PtPbBi HNPs also show a better operational durability than commercial Pt/C. For the ethylene glycol oxidation reaction, a mass activity of 42.7% was retained even after a chronoamperometric test for 3600 s, which is rare among the reported Pt-based catalysts. By combining X-ray photoelectron spectroscopy and electrochemical characterization, we reveal the electron transfer between Pt, Pb, and Bi; this would lead to weakened CO adsorption and enhanced OH adsorption, thereby promoting the removal of toxic intermediates and ensuring that PtPbBi HNP samples have high activity and excellent stability. This work can inspire the design and synthesis of Pt-based nanocatalysts.

Near Infrared-Activatable Platinum-Decorated Gold Nanostars for Synergistic Photothermal/Ferroptotic Therapy in Combating Cancer Drug Resistance

Ferroptotic cell death results from glutathione peroxidase 4 (GPX4) inactivation and/or glutathione (GSH) depletion. Elevated GSH levels are often found in multidrug-resistant (MDR) tumor cells, reducing their sensitivity to chemotherapeutic drugs and the efficacy of treatment. MDR cells also acquire a dependency on GPX4, reducing their oxidative stress and promoting their survival. Therefore, the depletion of GSH and inactivation of GPX4 has the potential to be a superior treatment strategy for MDR tumors. Platinum-decorated gold nanostars (Pt-AuNS) are presented as a novel metal nanoprodrug for ferroptotic therapy against MDR tumors. Under dark conditions, the synthesized Pt-AuNS exhibit negligible levels of toxicity. Upon exposure of the Pt-AuNS to near-infrared (NIR) light, active metallic (Pt and Au) species are released, subsequently inducing cytotoxicity. The mechanism of action is attributed to GSH depletion and GPX4 inactivation, accumulating lipid hydroperoxides, which in turn leads to ferroptosis. In in vivo xenograft, the MDR cancer model confirmed the NIR light-activation of Pt-AuNS prodrugs, resulting in efficient ferroptotic therapeutic action against MDR tumors without long-term side effects. The findings lay the groundwork for using Pt-AuNS prodrugs responsive to NIR light as ferroptosis-inducing agents in chemo-resistant cancer cells and demonstrate their potential for use in future clinical applications.

The Ethanol Oxidation Reaction Performance of Carbon-Supported PtRuRh Nanorods

In this study, carbon-supported Pt-based catalysts, including PtRu, PtRh, and PtRuRh nanorods (NRs), were prepared by the formic acid reduction method for ethanol oxidation reaction (EOR) application. The aspect ratio of all experimental NRs is 4.6. The X-ray photoelectron spectroscopy and H2-temperature-programmed reduction results confirm that the ternary PtRuRh has oxygen-containing species (OCS), including PtOx, RuOx and RhOx, on its surface and shows high EOR current density at 0.6 V. The corresponding physical structure results indicate that the surface OCS can enhance the adsorption of ethanol through bi-functional mechanism and thereby promote the EOR activity. On the other hand, the chronoamperometry (CA) results imply that the ternary PtRuRh has the highest mass activity, specific activity, and stability among all catalysts. The aforementioned pieces of evidence reveal that the presence of OCS facilitates the oxidation of adsorbed intermediates, such as CO or CHx, which prevents the Pt active sites from poisoning and thus simultaneously improves the current density and durability of PtRuRh NRs in EOR.

Synthesis of three-dimensional Au-graphene quantum dots@Pt core-shell dendritic nanoparticles for enhanced methanol electro-oxidation

Au-graphene quantum dots (GQDs)@Pt core-shell nanodendrites are synthesized through a two-step reduction approach, in which Au forms the core, GQDs form an intermediate layer and dendritic Pt forms the shell. Among the above synthesized catalysts, the GQDs can manipulate the binding of reaction intermediates on the Pt surface as well as assemble π-π ^* conjugate bonds, thus forming a dendritic Pt shell instead of a compact Pt shell. The obtained core-shell structure was characterized by transmission electron microscopy, energy-dispersive x-ray and x-ray photoelectron spectroscopy. The methanol electro-oxidation was investigated in alkaline media on the Au-GQDs@Pt modified electrode via cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy analysis. In particular, we discovered that Au-Pt assembled with GQDs could dramatically improve the activity and stability of the catalysts, owing to the synergistic effect raised by the GQDs, which exhibit prominent electron conductivity and great chemical/physical stability. It was also found that the Pt/Au mole ratios could control the Pt shell thickness, which significantly affected the catalytic methanol oxidation activity of the Au-GQDs@Pt nanodendrites. The Au-GQDs@Pt nanodendrites with optimum Pt/Au mole ratios of 1.0 exhibited a 2.5 times increase in electrocatalytic activity toward methanol oxidation compared with the commercial catalyst (Pt/C), and its CO tolerance was also greatly improved. The above results show that the Au-GQDs@Pt nanocatalysts have potential application prospects in direct methanol fuel cells.

Shape-control of one-dimensional PtNi nanostructures as efficient electrocatalysts for alcohol electrooxidation

Bimetallic one-dimensional (1D) nanostructures such as nanowires (NWs) and nanorods (NRs), serving as high-efficiency anode electrocatalysts, have attracted extensive attention in the past decade. However, the precise design and synthesis of 1D Pt-based nanocrystals with tunable morphology and size still remain an arduous challenge. Driven by this, we report a facile yet efficient strategy for the first time to prepare PtNi ultrafine NWs (UNWs), sinuous NWs (SNWs) and ultrashort NRs (UNRs) by adjusting the amount of citric acid, ascorbic acid and glucose. Detailed analysis of their electrocatalytic properties has indicated that the as-obtained PtNi SNWs exhibit the most outstanding electrocatalytic activity toward ethylene glycol oxidation reaction (EGOR) and glycerol oxidation (GOR), 4.5 and 4.3 times higher in mass activity as well as 4.3 and 3.9 times higher in specific activity compared with the commercial Pt/C catalyst. The as-prepared PtNi SNWs are also more stable than the commercial Pt/C catalyst after successive durability tests. The proposed method provides insight into more rational designs of bimetallic nanocatalysts with 1D architectures and the as-synthesized PtNi catalysts with improved electrocatalytic performance assist in promoting the further development of direct alcohol fuel cells (DAFCs).

Ethanol Oxidation Reaction on Tandem Pt/Rh/SnOx Catalyst

To elucidate the atomic arrangement of a Pt-Rh-Sn ternary catalyst with a high catalytic activity for ethanol oxidation reaction (EOR) and high CO2 selectivity, we prepared a tandem Pt/Rh/SnOx, in which a Rh adlayer was deposited on a Pt substrate (Rh coverage: 0.28), followed by depositing several layers of SnOx only on the Rh surface (Sn coverage: 0.07). For reference, Sn was randomly deposited on the Rh-modified Pt (Pt/Rh) electrode whose Rh and Sn coverages were 0.22 and 0.36 (random Pt/Rh/SnOx). X-ray photoelectron spectroscopy demonstrated that Pt and Rh were metallic, and Sn was largely oxidized. Both Pt/Rh/SnOx electrodes were less positive in onset potential of EOR current density and higher in EOR current density than Pt and Rh/Pt electrodes. In situ infrared reflection-absorption spectroscopy demonstrated that the tandem Pt/Rh/SnOx electrode did not produce acetic acid, but produced CO2 in contrast to the random Pt/Rh/SnOx, suggesting that a tandem arrangement of Pt, Rh and SnOx, in which the Pt and SnOx sites were separated by the Rh sites, was effective for selective CO2 production. In the electrostatic electrolysis at 0.5 V vs. RHE, the tandem Pt/Rh/SnOx electrode exhibited higher EOR current density than the Pt and Pt/Rh electrodes after 1.5 h.

Facile Aqueous-Phase Synthesis of the PtAu/Bi2O3 Hybrid Catalyst for Efficient Electro-Oxidation of Ethanol

In this work, we present a facile aqueous-phase synthesis of a hybrid catalyst consisting of PtAu alloy supported on Bi₂O₃ microspheres. Multistep reduction of HAuCl₄ and K₂PtCl₄ salts on Bi₂O₃ and subsequent annealing lead to the formation of this hybrid catalyst. To the best of our knowledge, this is the first report of using Bi₂O₃ as a catalyst support in fuel cell applications. The material was characterized by powder X-ray diffraction and various microscopic techniques. This composite showed remarkable activity as well as stability toward the electro-oxidation of ethanol in comparison to commercially available Pt/C. The order of the reactivity was found to be commercial Pt/C (50.4 mA/m²mg_Pt^-1) < Pt/Bi₂O₃(10) (108 mA/m²mg_Pt^-1) < PtAu/Bi₂O₃(10) (459 mA/m²mg_Pt^-1). The enhancement in the activity can be explained through cooperative effects, namely, ligand effects of gold and Bi₂O₃ support, which helps in removing carbon monoxide molecules to avoid the poisoning of the Pt active sites.

Directional coalescence growth of ultralong Au93Pt7 alloy nanowires and their superior electrocatalytic performance in ethanol oxidation

Ultralong (∼25-30 μm) surface-Pt-rich Au93Pt7 alloy nanowires (ANWs) were achieved by a directional coalescence between spherical nanoparticles. Also, the ANWs exhibit superior electrocatalytic activity and long-term durability towards ethanol oxidation, ∼12 times in the mass activity better than the state-of-the-art commercial Pt/C catalyst.

A simple approach to improve the electrocatalytic properties of commercial Pt/C

Decoration of commercial Pt/C with Au via a simple solution process to improve electrocatalytic ethanol oxidation.