Surface chemistry of carbon electrodes in 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid – an in situ infrared study

Unraveling the Capacitive Behaviors in Nanoconfined Ionophilic Carbon Pores

Intensifying the synergy between confined carbon nanopores and ionic liquids (ILs) and a deep comprehension of the ion behavior is required for enhancing the capacitive storage performance. Despite many theoretical insights on the storage mechanism, experimental verification has remained lacking due to the intricate nature of pore texture. Here, a compressed micropore-rich carbon framework (CMCF) with tailored monolayer and bilayer confinement pores is synthesized, which exhibits a compatible ionophilic interface to accommodate the IL [EMIM][BF4]. By deploying in situ Raman spectroscopy, in situ Fourier-transform infrared spectroscopy, and solid-state nuclear magnetic resonance, the effect of the pore textures on ions storage behaviors is elucidated. A voltage-induced ion gradient filling process in these ionophilic pores is proposed, in which ion exchange and co-ion desorption dominate the charge storage process. Moreover, it is established that the monolayer confinement of ions enhances the capacity, and bilayer confinement facilitates the charging dynamics. This work may guide the design of nanoconfinement carbon for high-energy-density supercapacitors and deepen the understanding of the charge storage mechanism in ionophilic pores.

Uncovering the Dominant Role of an Extended Asymmetric Four-Coordinated Water Network in the Hydrogen Evolution Reaction

In situ and accurate measurement of the structure and dynamics of interfacial water in the hydrogen evolution reaction (HER) is a well-known challenge because of the coupling of water among varied structures and its dual role as reactants and solvents. Further, the interference of bulk water and intricate interfacial interactions always hinders the probing of interfacial water. Surface-enhanced infrared absorption spectroscopy is extremely sensitive for the measurement of interfacial water; herein, we develop a nanoconfinement strategy by introducing nonaqueous ionic liquids to decouple and tailor the water structure in the electric double layer and further combined with molecular dynamics simulations, successfully gaining the correlation between isolated water, water clusters, and the water network with HER activity. Our results clearly disclosed that the potential-dependent asymmetric four-coordinated water network, whose connectivity could be regulated by hydrophilic and hydrophobic cations, was positively correlated with HER activity, which provided a pioneering guidance framework for revealing the function of water in catalysis, energy, and surface science.

Exploring the Charge Storage Dynamics in Donor-Acceptor Covalent Organic Frameworks Based Supercapacitors by Employing Ionic Liquid Electrolyte

Two donor-acceptor type tetrathiafulvalene (TTF)-based covalent organic frameworks (COFs) are investigated as electrodes for symmetric supercapacitors in different electrolytes, to understand the charge storage and dynamics in 2D COFs. Till-date, most COFs are investigated as Faradic redox pseudocapacitors in aqueous electrolytes. For the first time, it is tried to enhance the electrochemical performance and stability of pristine COF-based supercapacitors by operating them in the non-Faradaic electrochemically double layer capacitance region. It is found that the charge storage mechanism of ionic liquid (IL) electrolyte based supercapacitors is dependent on the micropore size and surface charge density of the donor-acceptor COFs. The surface charge density alters due to the different electron acceptor building blocks, which in turn influences the dense packing of the IL near its pore. The micropores induce pore confinement of IL in the COFs by partial breaking of coulomb ordering and rearranging it. The combination of these two factors enhance the charge storage in the highly microporous COFs. The density functional theory calculations support the same. At 1 A g-1 , TTF-porphyrin COF provides capacitance of 42, 70, and 130 F g-1 in aqueous, organic, and IL electrolyte respectively. TTF-diamine COF shows a similar trend with 100 F g-1 capacitance in IL.

The review of advances in interfacial electrochemistry in Estonia: electrochemical double layer and adsorption studies for the development of electrochemical devices

The electrochemistry nowadays has many faces and challenges. Although the focus has shifted from fundamental electrochemistry to applied electrochemistry, one needs to acknowledge that it is impossible to develop and design novel green energy transition devices without a comprehensive understanding of the electrochemical processes at the electrode and electrolyte interface that define the performance mechanisms. The review gives an overview of the systematic research in the field of electrochemistry in Estonia which reflects on the excellent collaboration between fundamental and applied electrochemistry.

Potential Screening at Electrode/Ionic Liquid Interfaces from In Situ X-ray Photoelectron Spectroscopy

A new approach to investigate potential screening at the interface of ionic liquids (ILs) and charged electrodes in a two-electrode electrochemical cell by in situ X-ray photoelectron spectroscopy has been introduced. Using identical electrodes, we deduce the potential screening at the working and the counter electrodes as a function of applied voltage from the potential change of the bulk IL, as derived from corresponding core level binding energy shifts for different IL/electrode combinations. For imidazolium-based ILs and Pt electrodes, we find a significantly larger potential screening at the anode than at the cathode, which we attribute to strong attractive interactions between the imidazolium cation and Pt. In the absence of specific ion/electrode interactions, asymmetric potential screening only occurs for ILs with different cation and anion sizes as demonstrated for an imidazolium chloride IL and Au electrodes, which we assign to the different thicknesses of the electrical double layers. Our results imply that potential screening in ILs is mainly established by a single layer of counterions at the electrode.

Preparation and Characterization of Electrospun Gelatin Nanofibers for Use as Nonaqueous Electrolyte in Electric Double-Layer Capacitor

A novel nanofibrous gel electrolyte was prepared via gelatin electrospinning for use as a nonaqueous electrolyte in electric double-layer capacitors (EDLCs). An electrospinning technique with a 25 wt% gelatin solution was applied to produce gelatin electrospun (GES) nanofiber electrolytes. Structural analysis of the GES products showed a clearly nanofibrous structure with fiber diameters in the 306.2–428.4 nm range and exhibiting high thermal stability, high tensile strength, and a stable form of nanofibrous structure after immersion in 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4). After testing over a range of spinning times, GES electrolytes that were produced at 25 min (GES-25) had a suitable thickness for the assembly of EDLC with the optimized tensile properties and were used to fabricate EDLC test cells with EMImBF4. These test cells were compared to those with pure EMImBF4 and a separator as an electrolyte. The electrochemical properties of the test cells were characterized by charge-discharge testing, discharge capacitance, and alternative current (AC) impedance measurements. AC impedance measurements showed that the test cell with the GES-25/EMImBF4 gel electrolyte showed slightly poorer contact with the electrode when compared to that with pure EMImBF4, whereas exhibited comparable IR drop and discharge capacitance (calculated capacitance retention was 56.6%). The results demonstrated that this novel gel electrolyte can be used as a nonaqueous electrolyte in order to improve the safety in EDLCs.

in Situ X-ray Photoelectron Spectroscopic and Electrochemical Studies of the Bromide Anions Dissolved in 1-Ethyl-3-Methyl Imidazolium Tetrafluoroborate

Influence of electrode potential on the electrochemical behavior of a 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF₄) solution containing 5 wt % 1-ethyl-3-methylimidazolium bromide (EMImBr) has been investigated using electrochemical and synchrotron-initiated high-resolution in situ X-ray photoelectron spectroscopy (XPS) methods. Observation of the Br 3d_5/2 in situ XPS signal, collected in a 5 wt % EMImBr solution at an EMImBF₄–vacuum interface, enabled the detection of the start of the electrooxidation process of the Br⁻ anion to Br₃⁻ anion and thereafter to the Br₂ at the micro-mesoporous carbon electrode, polarized continuously at the high fixed positive potentials. A new photoelectron peak, corresponding to B–O bond formation in the B 1s in situ XPS spectra at E ≤ −1.17 V, parallel to the start of the electroreduction of the residual water at the micro-mesoporous carbon electrode, was observed and is discussed. The electroreduction of the residual water caused a reduction in the absolute value of binding energy vs. potential plot slope twice to ca. dBE dE⁻¹ = −0.5 eV V⁻¹ at E ≤ −1.17 V for C 1s, N 1s, B 1s, F 1s, and Br 3d_5/2 photoelectrons.

Preparation of thin-film electrolyte from chitosan-containing ionic liquid for application to electric double-layer capacitors

A novel thin-film electrolyte (TFE) based on chitosan (CS) with 1‑ethyl‑3‑methylimidazolium tetrafluoroborate (EMImBF₄) was prepared by a new procedure for use as a solid electrolyte in electric double-layer capacitors (EDLCs). In this system, EMImBF₄ plays important roles as both a dissolving solution and a charge carrier for EDLC application. By analyzing and characterizing the obtained products, the CS-TFEs showed a surface without CS/EMImBF₄ phase separation and with high thermal stability and good tensile properties. The electrochemical properties were measured as the charge-discharge performance, the discharge capacitance, and alternating-current impedance. A test cell with CS-TFE with a calculated dry thin-film content of 80 wt% EMImBF₄ showed a comparable IR drop and higher discharge capacitance than a liquid-phase EMImBF₄ system and also showed low electrode/electrolyte interfacial resistance. Consequently, this novel CS-TFE is suitable for high-performance EDLCs and improves the safety of such devices.

On the thickness of the double layer in ionic liquids

The Au(111)|BF₄⁻interface model in which BF₄⁻reorients and spontaneously dissociates at surface coverageθ= 1/3.

NMR Study of the Reductive Decomposition of [BMIm][NTf2 ] at Gold Electrodes and Indirect Electrochemical Conversion of CO2

Potential controlled electrolyses of [BMIm][NTf₂ ] ionic liquid were performed at a gold cathode under nitrogen atmosphere. The structures of the major conversion products of the BMIm⁺ cation were elucidated on the basis of 1D and 2D nuclear magnetic resonance (NMR) analyses and gas chromatography (GC) analysis of the volatile compounds. Recombination of the imidazol-2-yl radicals, generated at the electrode by single electron transfer, leads to neutral diastereomeric dimers in equal proportions, with a faradaic efficiency of 80 %, while disproportionation of these radicals and/or reaction with hydrogen atoms adsorbed at the electrode generates a neutral monomer with 20 % faradaic efficiency. Both pathways also yield the N-heterocyclic carbene imidazolin-2-ylidene, which is involved in fast proton exchange with the parent BMIm⁺ cation. The reductive decomposition products of the BMIm⁺ cation are no longer detected if the pre-electrolysed sample is reacted with CO₂ , which undergoes an indirect reduction and generates the carboxylate adduct.

A review of electrolyte materials and compositions for electrochemical supercapacitors

Electrolytes have been identified as some of the most influential components in the performance of electrochemical supercapacitors (ESs), which include: electrical double-layer capacitors, pseudocapacitors and hybrid supercapacitors. This paper reviews recent progress in the research and development of ES electrolytes. The electrolytes are classified into several categories, including: aqueous, organic, ionic liquids, solid-state or quasi-solid-state, as well as redox-active electrolytes. Effects of electrolyte properties on ES performance are discussed in detail. The principles and methods of designing and optimizing electrolytes for ES performance and application are highlighted through a comprehensive analysis of the literature. Interaction among the electrolytes, electro-active materials and inactive components (current collectors, binders, and separators) is discussed. The challenges in producing high-performing electrolytes are analyzed. Several possible research directions to overcome these challenges are proposed for future efforts, with the main aim of improving ESs' energy density without sacrificing existing advantages (e.g., a high power density and a long cycle-life) (507 references).

Nanocomposite semi-solid redox ionic liquid electrolytes with enhanced charge-transport capabilities for dye-sensitized solar cells

The ability of Pt nanostructures to induce the splitting of the II bond in iodine (triiodide) molecules is explored here to enhance electron transfer in the iodine/iodide redox couple. Following the dispersal of Pt nanoparticles at 2 % (weight) level, charge transport was accelerated in triiodide/iodide-containing 1,3-dialkylimidazolium room-temperature ionic liquid. If both Pt nanoparticles and multi-walled carbon nanotubes were introduced into the ionic-liquid-based system, a solid-type (nonfluid) electrolyte was obtained. By using solid-state voltammetric (both sandwich-type and microelectrode-based) methodology, the apparent diffusion coefficients for charge transport increased to approximately 1×10(-6)  cm(2)  s(-1) upon the incorporation of the carbon-nanotube-supported iodine-modified Pt nanostructures. A dye-sensitized solar cell comprising TiO2 covered with a heteroleptic Ru(II) -type sensitizer (dye) and the semisolid triiodide/iodide ionic liquid electrolyte admixed with carbon-nanotube-supported Pt nanostructures yielded somewhat higher power conversion efficiencies (up to 7.9 % under standard reporting conditions) than those of the analogous Pt-free system.