Influence of the laser irradiation on the electrochemical and spectroscopic peculiarities of graphene-chitosan composite film

Effect of Pretreatment on the Nitrogen Doped Activated Carbon Materials Activity towards Oxygen Reduction Reaction

Nitrogen-doped activated carbons with controlled micro- and mesoporosity were obtained from wood and wastes via chemical processing using pre-treatment (pyrolysis at 500 °C and hydrothermally carbonization at 250 °C) and evaluated as oxygen reduction catalysts for further application in fuel cells. The elemental and chemical composition, structure and porosity, and types of nitrogen bonds of obtained catalyst materials were studied. The catalytic activity was evaluated in an alkaline medium using the rotating disk electrode method. It was shown that an increase in the volume of mesopores in the porous structure of a carbon catalyst promotes the diffusion of reagents and the reactions proceed more efficiently. The competitiveness of the obtained carbon materials compared to Pt/C for the reaction of catalytic oxygen reduction is shown.

On the design and development of foamed GO-hydrogel nanocomposite surfaces by ultra-short laser processing

Graphene oxide (GO) and reduced graphene oxide have outstanding qualities that could be exploited as reinforcement and antibacterial agents in a plethora of biomedical applications. In this contribution, it is reported the deployment of a polyacrylamide GO-hydrogel composite (GO@pAAm) which was photo-converted and structured by ultra-short laser irradiation using a direct laser writing (DLW) approach. The materials were characterized by Fourier Transform Infrared spectroscopy, scanning electron microscopy and confocal microscopy. The laser structure generates a multi-photo-induced effect: surface foaming and patterning, microdomains with enhanced selective water-swelling and effective GO photo-reduction. A first laser scan seems likely to induce the photo-reduction of GO and subsequent laser pulses trigger the structure/foaming. The photo-reduction of GO is evidenced by Raman spectroscopy by the relatively changing intensities of the D to G signals. Macroscopically by an increase in conductivity (decrease in sheet resistance fromR_S-GO@pAAm= 304 ± 20 kΩ sq^-1toR_{S-rGO@pAAm-DLW}= 27 ± 8 kΩ sq^-1) suggesting a reduction of the material measured by 4-Point-Probe.

Laser-Assisted Selective Fabrication of Copper Traces on Polymers by Electroplating

The selective deposition of metals on dielectric materials is widely used in the electronic industry, making electro-conductive connections between circuit elements. We report a new low-cost laser-assisted method for the selective deposition of copper tracks on polymer surfaces by electroplating. The technique uses a laser for the selective modification of the polymer surface. The electrical conductivity of some polymers could be increased due to laser irradiation. Polyimide samples were treated using nanosecond and picosecond lasers working at a 1064 nm wavelength. An electro-conductive graphene-like layer was formed on the polymer surface after the laser treatment with selected parameters, and the copper layer thickness of 5–20 µm was deposited on the modified surface by electroplating. The selective laser-assisted electroplating technology allows the fabrication of copper tracks on complex shape dielectric materials. The technology could be used in the manufacturing of molded interconnect devices (MID).

Highly Active Wood-Derived Nitrogen-Doped Carbon Catalyst for the Oxygen Reduction Reaction

In this recent decade, great interest has risen to develop metal-free and cheap, biomass-derived electrocatalysts for oxygen reduction reaction (ORR). Herein, we report a facile strategy to synthesize an electrochemically active nanocarbon material from the renewable and biological resource, wood biomass. The ORR activity of the catalyst material was investigated in 0.1 M KOH solution by employing the rotating disc electrode method. Scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy were employed to obtain more information about the catalyst material's morphology and composition. The material exhibits outstanding electrocatalytic activity with low onset potential and high current density, similar to that of a commercial Pt/C catalyst in an alkaline medium. The results clearly ascertain that wooden biomass can be easily transformed into novel carbon nanostructures with superior ORR activity and possibility to be used in fuel cells and metal-air batteries.

Comprehensive Review on Graphene Oxide for Use in Drug Delivery System

Motivated by the accomplishment of carbon nanotubes (CNTs), graphene and graphene oxide (GO) has been widely investigated in the previous studies as an innovative medication nanocarrier for the loading of a variety of therapeutics as well as anti-cancer medications, poor dissolvable medications, antibiotics, antibodies, peptides, DNA, RNA and genes. Graphene provides the ultra-high drug-loading efficiency due to the wide surface area. Graphene and graphene oxide have been widely investigated for biomedical applications due to their exceptional qualities: twodimensional planar structure, wide surface area, chemical and mechanical constancy, sublime conductivity and excellent biocompatibility. Due to these unique qualities, GO applications provide advanced drug transports frameworks and transports of a broad range of therapeutics. In this review, we discussed the latest advances and improvements in the uses of graphene and GO for drug transport and nanomedicine. Initially, we have described what is graphene and graphene oxide. After that, we discussed the qualities of GO as a drug carrier, utilization of GO in drug transport applications, targeted drug transport, transport of anticancer medications, chemical control medicine releasee, co-transport of different medications, comparison of GO with CNTs, nano-graphene for drug transport and at last, we have discussed the graphene toxicity. Finally, we draw a conclusion of current expansion and the potential outlook for the future.

Synthesis of Reduced Graphene Oxide with Adjustable Microstructure Using Regioselective Reduction in the Melt of Boric Acid: Relationship Between Structural Properties and Electrochemical Performance

The melt of H₃BO₃ was used to reach a controllable reduced graphene oxide (rGO) synthesis protocol using a graphene oxide (GO) precursor. Thermogravimetric analysis and differential scanning calorimetry (TG/DSC) investigation and scanning electron microscopy (SEM) images have shown that different from GO powder, reduction of GO in the melt of H₃BO₃ leads to the formation of less disordered structure of basal graphene planes. Threefold coordinated boron atom acts as a scavenger of oxygen atoms during the process of GO reduction. Fourier-transform infrared (FTIR) spectra of synthesized products have shown that the complex of glycerol and H₃BO₃ acts as a regioselective catalyst in epoxide ring-opening reaction and suppress the formation of ketone C=O functional groups at vacancy sites. Thermal treatment at 800 °C leads to the increased concentration of point defects in the backbone structure of rGO. Synthesized materials were tested electrochemically. The electrochemical performance of these materials essentially differs depending on the preparation protocol. The highest charge/discharge rate and double-layer capacitance were found for a sample synthesized in the melt of H₃BO₃ in the presence of glycerol and treated at 800 °C. The effect of optimal porosity and high electrical conductivity on the electrochemical performance of prepared materials also were studied.

Synthesis of Graphite Oxide with Different Surface Oxygen Contents Assisted Microwave Radiation

Graphite oxide is synthesized via oxidation reaction using oxidant compounds that have lattice defects by the incorporation of unlike functional groups. Herein, we report the synthesis of the graphite oxide with diverse surface oxygen content through three (B, C, D) different modified versions of the Hummers method assisted microwave radiation compared with the conventional graphite oxide sample obtained by Hummers method (A). These methods allow not only the production of graphite oxide but also reduced graphene oxide, without undergoing chemical, thermal, or mechanical reduction steps. The values obtained of C/O ratio were ~2, 3.4, and ~8.5 for methodologies C, B, and D, respectively, indicating the presence of graphite oxide and reduced graphene oxide, according to X-ray photoelectron spectroscopy. Raman spectroscopy of method D shows the fewest structural defects compared to the other methodologies. The results obtained suggest that the permanganate ion produces reducing species during graphite oxidation. The generation of these species is attributed to a reversible reaction between the permanganate ion with π electrons, ions, and radicals produced after treatment with microwave radiation.

Microwave-assisted synthesis of void-induced graphene-wrapped nickel oxide hybrids for supercapacitor applications

A simple and fast microwave irradiation technique has been used to synthesize void-induced with graphene-wrapped nickel oxide (VGWN) hybrids. The VGWN hybrid material provides long term cyclic stability and excellent electrochemical performance.