Magnetic entrapment for fast and sensitive determination of metronidazole with a novel magnet-controlled glassy carbon electrode

Use of a nano-porous gold film electrode modified with chitosan / polypyrrole for electrochemical determination of metronidazole in the Presence of Acetaminophen

This study, it was aimed to provide a sensitive, easy and selective method for designing Nano-porous gold film electrode (NPGF) electrode for simultaneous measurement of metronidazole (MT) and acetaminophen (AC). For this purpose, the NPGF electrode surface was modified with chitosan (CS) and poly pyrrole (PPY) by electrochemical method, and then CS and PPY modified NPGF (PPY-CS-NPGF) electrode were used to measure these drugs. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) are employed for the characterization of the attained PPY-CS-NPGF electrode. Using cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS) and chronoamperometry, the electrochemical behavior of MT was investigated with the modified electrode. By differential pulse voltammetry, linear ranges of concentration 0.005-100 μM with linear coefficients of 0.9898 and a detection limit of 0.0009 μM were obtained for MT. Finally, an electrochemical sensor was used to measure MT in a real sample, which yielded acceptable results. PPY-CS-NPGF electrodes have a wide linear range, high selectivity, sensitivity and stability and can be used successfully to determine these drugs.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Magnetic-molecularly imprinted polymers in electrochemical sensors and biosensors

Magnetic particles, as well as molecularly imprinted polymers, have revolutionized separation and bioanalytical methodologies in the 1980s due to their wide range of applications. Today, biologically modified magnetic particles are used in many scientific and technological applications and are integrated in more than 50,000 diagnostic instruments for the detection of a huge range of analytes. However, the main drawback of this material is their stability and high cost. In this work, we review recent advances in the synthesis and characterization of hybrid molecularly imprinted polymers with magnetic properties, as a cheaper and robust alternative for the well-known biologically modified magnetic particles. The main advantages of these materials are, besides the magnetic properties, the possibility to be stored at room temperature without any loss in the activity. Among all the applications, this work reviews the direct detection of electroactive analytes based on the preconcentration by using magnetic-MIP integrated on magneto-actuated electrodes, including food safety, environmental monitoring, and clinical and pharmaceutical analysis. The main features of these electrochemical sensors, including their analytical performance, are summarized. This simple and rapid method will open the way to incorporate this material in different magneto-actuated devices with no need for extensive sample pretreatment and sophisticated instruments.

Biosensing platform on ferrite magnetic nanoparticles: Synthesis, functionalization, mechanism and applications

Ferrite magnetic nanoparticles (FMNPs) are gaining popularity to design biosensors for high-performance clinical diagnosis. The fusion of information shows that FMNPs based biosensors require well-tuned FMNPs as detection probes to produce large and specific biological signals with minimal non-specific binding. Nevertheless, there is a noticeable lacuna of information to solve the issues related to suitable synthesis route, particle size reduction, functionalization, sensitivity towards targeted intercellular biological tiny particles, and lower signal-to-noise ratio. Therefore it allows exploring unique characteristics of FMNPs to design a suitable sensing device for intracellular measurements and diseases detection. This review focuses on the extensively used synthesis routes, their advantages and limitations, crystalline structure, functionalization, along with recent applications of FMNPs in biosensors, taking into consideration their analytical figures of merit and range of linearity. This work also addresses the current progress, key factors for sensitivity, selectivity and productivity improvement along with the challenges, future trends and perspectives of FMNPs based biosensors.

Efficient preparation of nitrogen-doped fluorescent carbon dots for highly sensitive detection of metronidazole and live cell imaging

Herein, nitrogen-doped carbon dots (N-CDs) emitting blue fluorescence were prepared using L-tartaric acid and triethylenetetramine through a simple and quick microwave-assisted method. The synthesized N-CDs displayed excitation-dependent fluorescence behavior, and their maximum excitation and emission wavelengths were 350 and 425 nm, respectively. The obtained N-CDs, which featured excellent fluorescence properties with a high fluorescence quantum yield of 31%, were applied to detect metronidazole (MNZ), which can effectively quench the fluorescence intensity of N-CDs due to the inner filter effect. This phenomenon was used as basis to develop a label-free fluorescent method for rapid MNZ determination, with the limit of detection of 0.22 μM and corresponding linear range of 0.5-22 μM. Hence, we had established a fluorescence method for MNZ detection and applied it to detect MNZ in real samples with satisfactory results. Finally, N-CDs with superior biocompatibility were applied for cell imaging and MNZ detection by the changes in fluorescence intensity.

Magnetic molecularly imprinted electrochemical sensors: A review

The preparation and practical applications of molecularly imprinted electrochemical sensors (MIECSs) remain challenging due to issues involving electrode surface renewal modes, low adsorption capacities, and sample preparation speeds. To solve these issues, magnetic molecularly imprinted electrochemical sensors (MMIECSs) have been extensively explored by various groups. Recently, MMIECSs fabricated based on diverse strategies have yielded insight into the development of MIECSs, and they have provided effective paths for sample preparation, immobilization and renewal of molecularly imprinted polymers (MIPs) on the electrode surface, leading to promising performances of MIECSs. This review comprehensively describes the research advances for various types of MMIECSs and their applications in the fields of food safety, environmental monitoring, and clinical and pharmaceutical analysis. Based on our understanding of MMIECSs, the literature in this field is thoroughly explored and classified in this review. The challenges existing in this research area and some potential strategies for the rational design of high-performance MMIECS are also outlined.

Nanosized Difunctional Photo Responsive Magnetic Imprinting Polymer for Electrochemically Monitored Light-Driven Paracetamol Extraction

Herein, a novel photoresponsive magnetic electrochemical imprinting sensor for the selective extraction of paracetamol from biological samples was designed. In particular, nanosized photoresponsive molecular imprinted polymers were prepared on the surface of magnetic Fe₃O₄ nanoparticles through living radical polymerization of azobenzene. The introduction of a magnetic-controlled glassy carbon electrode makes the immobilization and removal of nanosized photoresponsive molecular imprinted polymers on the magnetic-controlled glassy carbon electrode surface facilely operational. With the photoresponsive property, the sensor undergoes reversible release and uptake of paracetamol upon alternative irradiation at 365 and 440 nm basing on a configurational change of azobenzene monomer in the photoresponsive molecular imprinted polymers receptor sites. Simultaneously, these processes are monitored by the photoresponsive changes of electrochemical signal from paracetamol. Two linear ranges from 0.001 to 0.7 mmol L^-1 (R² = 0.96) and 0.7 to 7 mmol L^-1 (R² = 0.95) for paracetamol determination were obtained with a quantification limit of 0.000 86 mmol L^-1 and a detection limit of 0.000 43 mmol L^-1. The recoveries of paracetamol in the urine as determined by photoresponsive molecular imprinted polymers extraction were varied between 87.5% and 93.3%. As a consequence, combining photocontrolled selective extraction, interfacial stability from magnetic adsorption, and specifically electrochemical response, the photoresponsive molecular imprinted polymers sensor shows significant advantages for simultaneous separation, enrichment, and detection of trace paracetamol in biological samples.

A highly sensitive metronidazole sensor based on a Pt nanospheres/polyfurfural film modified electrode

A sensitively electrochemical metronidazole sensor basing on a Pt nanospheres/polyfurfural modified glassy carbon electrode.

A zeolite modified carbon paste electrode based on copper exchanged clinoptilolite nanoparticles for voltammetric determination of metronidazole

Modified carbonpaste elelctrode with Cu(ii)-exchanged clinoptilolite nanoparticles showed increased peak current in the presence of metronidazole.

Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology

Recently, the nanostructured modified molecularly imprinting polymer has created a great attention in research field due to its excellent properties such as high surface to volume ratio, low cost, and easy preparation/handling. Among the nanostructured materials, the carbonaceous material such as 'graphene' has attracted the tremendous attention of researchers owing to their fascinating electrical, thermal and physical properties. In this review article, we have tried to explore as well as compile the role of graphene-based nanomaterials in the fabrication of imprinted polymers. In other words, herein the recent efforts made to introduce selectivity in graphene-based nanomaterials were tried collected together. The major concern of this review article is focused on the sensing devices fabricated via a combination of graphene, graphene@nanoparticles, graphene@carbon nanotubes and molecularly imprinted polymers. Additionally, the combination of graphene and quantum dots was also included to explore the fluorescence properties of zero-band-gap graphene.

Novel electrochemical sensing platform based on a molecularly imprinted polymer decorated 3D nanoporous nickel skeleton for ultrasensitive and selective determination of metronidazole

A novel electrochemical sensor has been developed by using a composite element of three-dimensional (3D) nanoporous nickel (NPNi) and molecularly imprinted polymer (MIP). NPNi is introduced in order to enhance the electron-transport ability and surface area of the sensor, while the electrosynthesized MIP layer affords simultaneous identification and quantification of the target molecule by employing Fe(CN)6(3-/4-) as the probe to indicate the current intensity. The morphology of the hybrid film was observed by scanning electron microscopy, and the properties of the sensor were examined by cyclic voltammetry and electrochemical impedance spectroscopy. By using metronidazole (MNZ) as a model analyte, the sensor based on the MIP/NPNi hybrid exhibits great features such as a remarkably low detection limit of 2 × 10(-14) M (S/N = 3), superb selectivity in discriminating MNZ from its structural analogues, and good antiinterference ability toward several coexisting substances. Moreover, the proposed method also demonstrates excellent repeatability and stability, with relative standard deviations of less than 1.12% and 1.4%, respectively. Analysis of MNZ in pharmaceutical dosage form and fish tissue is successfully carried out without assistance of complicated pretreatment. The MIP/NPNi composite presented here with admirable merits makes it a promising candidate for developing electrochemical sensor devices and plays a role in widespread fields.

Molecularly imprinted polymer decorated nanoporous gold for highly selective and sensitive electrochemical sensors

Electrochemical nanosensors based on nanoporous gold leaf (NPGL) and molecularly imprinted polymer (MIP) are developed for pharmaceutical analysis by using metronidazole (MNZ) as a model analyte. NPGL, serving as the loading platform for MIP immobilization, possesses large accessible surface area with superb electric conductivity, while electrochemically synthesized MIP thin layer affords selectivity for specific recognition of MNZ molecules. For MNZ determination, the hybrid electrode shows two dynamic linear range of 5 × 10(-11) to 1 × 10(-9) mol L(-1) and 1 × 10(-9) to 1.4 × 10(-6) mol L(-1) with a remarkably low detection limit of 1.8 × 10(-11) mol L(-1) (S/N = 3). In addition, the sensor exhibits high binding affinity and selectivity towards MNZ with excellent reproducibility and stability. Finally, the reliability of MIP-NPGL for MNZ detection is proved in real fish tissue samples, demonstrating the potential for the proposed electrochemical sensors in monitoring drug and biological samples.

Electrochemical sensor for chloramphenicol based on novel multiwalled carbon nanotubes@molecularly imprinted polymer

Herein, we present a novel electrochemical sensor for the determination of chloramphenicol (CAP), which is based on multiwalled carbon nanotubes@molecularly imprinted polymer (MWCNTs@MIP), mesoporous carbon (CKM-3) and three-dimensional porous graphene (P-r-GO). Firstly, 3-hexadecyl-1-vinylimidazolium chloride (C16VimCl) was synthetized by using 1-vinylimidazole and 1-chlorohexadecane as precursors. Then, C16VImCl was used to improve the dispersion of MWCNT and as monomer to prepare MIP on MWCNT surface to obtain MWCNTs@MIP. After that, the obtained MWCNTs@MIP was coated on the CKM-3 and P-r-GO modified glassy carbon electrode to construct an electrochemical sensor for the determination of CAP. The parameters concerning this assay strategy were carefully considered. Under the optimal conditions, the electrochemical sensor offered an excellent response for CAP. The linear response ranges were 5.0 × 10(-9)-5 × 10(-7)mol L(-1) and 5.0 × 10(-7)-4.0 × 10(-6), respectively, and the detection limit was 1.0 × 10(-10)mol L(-1). The electrochemical sensor was applied to determine CAP in real samples with satisfactory results.