Polycarbonyl(quinonyl) organic compounds as cathode materials for sustainable lithium ion batteries

Asymmetric Supercapacitors based on 1,10-phenanthroline-5,6-dione Molecular Electrodes Paired with MXene

An efficient approach to increase the energy density of supercapacitors is to prepare electrode materials with larger specific capacitance and increase the potential difference between the positive and negative electrodes in the device. Herein, an organic molecular electrode (OME) is prepared by anchoring 1,10-phenanthroline-5,6-dione (PD), which possesses two pyridine rings and an electron-deficient conjugated system, onto reduced graphene oxide (rGO). Because of the electron-deficient conjugated structure of PD molecule, PD/rGOs exhibit a more positive redox peak potential along with the advantages of high capacitance-controlled behaviour and fast reaction kinetics. Additionally, the small energy gap between the lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) leads to increased conductivity in PD/rGO. To assemble the asymmetric supercapacitor (ASC), a two-dimensional metal carbide, as known as MXene, with a chemical composition of Ti3C2Tx is selected as the negative electrode due to its exceptional performance, and PD/rGO-0.5 is employed as the positive electrode. Consequently, the working voltage is expanded up to 1.8 V. Through further electrochemical measurements, the assembled ASC (PD/rGO-0.5//Ti3C2Tx) achieves a remarkable energy density of 36.8 Wh kg-1. Remarkably, connecting two ASCs in series can power 73 LEDs, showcasing its promising potential for energy storage applications.

Bio-Based Polyhydroxyanthraquinones as High-Voltage Organic Electrode Materials for Batteries

Organic materials have gained much attention as sustainable electrode materials for batteries. Especially bio-based organic electrode materials (OEMs) are very interesting due to their geographical independency and low environmental impact. However, bio-based OEMs for high-voltage batteries remain scarce. Therefore, in this work, a family of bio-based polyhydroxyanthraquinones (PHAQs)-namely 1,2,3,4,5,6,7,8-octahydroxyanthraquinone (OHAQ), 1,2,3,5,6,7-hexahydroxyanthraquinone (HHAQ), and 2,3,6,7-tetrahydroxyanthraquinone (THAQ)-and their redox polymers were synthesized. These PHAQs were synthesized from plant-based precursors and exhibit both a high-potential polyphenolic redox couple (3.5-4.0 V vs Li/Li+) and an anthraquinone redox moiety (2.2-2.8 V vs Li/Li+), while also showing initial charging capacities of up to 381 mAh g-1. To counteract the rapid fading caused by dissolution into the electrolyte, a facile polymerization method was established to synthesize PHAQ polymers. For this, the polymerization of HHAQ served as a model reaction where formaldehyde, glyoxal, and glutaraldehyde were tested as linkers. The resulting polymers were investigated as cathode materials in lithium metal batteries. PHAQ polymer composites synthesized using formaldehyde as linker and 10 wt % multiwalled carbon nanotubes (MWCNTs), namely poly(THAQ-formaldehyde)-10 wt % MWCNTs and poly(HHAQ-formaldehyde)-10 wt % MWCNTs, exhibited the best cycling performance in the lithium metal cells, displaying a high-voltage discharge starting at 4.0 V (vs Li/Li+) and retaining 81.6 and 77.3 mAh g-1, respectively, after 100 cycles.

Nine-Electron Transfer of Binder Synergistic π-d Conjugated Coordination Polymers as High-Performance Lithium Storage Materials

To solve the problems such as the dissolution and the poor conductivity of organic small molecule electrode materials, we construct π-d conjugated coordination polymer Ni-DHBQ with multiple redox-active centers as lithium storage materials. It exhibits an ultra-high capacity of 9-electron transfers, while the π-d conjugation and the laminar structure inside the crystal ensure fast electron transport and lithium ion diffusion, resulting in excellent rate performance (505.6 mAh g^-1 at 1 A g^-1 after 300 cycles). The interaction of Ni-DHBQ with the binder CMC synergistically inhibits its dissolution and anchors the Ni atoms, thus exhibiting excellent cycling stability (650.7 mAh g^-1 at 0.1 A g^-1 after 100 cycles). This work provides insight into the mechanism of lithium storage in π-d conjugated coordination polymers and the synergistic effect of CMC, which will contribute to the molecular design and commercial application of organic electrode materials.

Facile Synthesis of a LiC15H7O4/Graphene Nanocomposite as a High-Property Organic Cathode for Lithium-Ion Batteries

Organic electrode materials face two outstanding issues in the practical applications in lithium-ion batteries (LIBs), dissolution and poor electronic conductivity. Herein, we fabricate a nanocomposite of an anthraquinone carboxylate lithium salt (LiAQC) and graphene to address the two issues. LiAQC is synthesized via a green and facile one-pot reaction and then ball-milled with graphene to obtain a nanocomposite (nr-LiAQC/G). For comparison, single LiAQC is also ball-milled to form a nanorod (nr-LiAQC). Together with pristine LiAQC, the three samples are used as cathodes for LIBs. Results show that good cycling performance can be obtained by introducing the -CO₂Li hydrophilic group on anthraquinone. Furthermore, the nr-LiAQC/G demonstrates not only a high initial discharge capacity of 187 mAh g^-1 at 0.1 C but also good cycling stability (reversible capacity: ∼165 mAh g^-1 at 0.1 C after 200 cycles) and good rate capability (the average discharge capacity of 149 mAh g^-1 at 2 C). The superior electrochemical properties of the nr-LiAQC/G profit from graphene with high electronic conductivity, the nanorod structure of LiAQC shortening the transport distance for lithium ions and electrons, and the introduction of the -CO₂Li hydrophilic group decreasing the dissolution of LiAQC in the electrolyte. Meanwhile, density functional theory calculations support the roles of graphene and -CO₂Li groups. The fabrication is general and facile, ready to be extended to other organic electrode materials.

An Insoluble Anthraquinone Dimer with Near-Plane Structure as a Cathode Material for Lithium-Ion Batteries

Conjugated carbonyl-based organic electrode materials for lithium-ion batteries have gained increasing interests owing to their many advantages such as resource abundance and sustainable development. However, serious dissolution in organic liquid electrolytes is often encountered, resulting in inferior electrochemical performance such as poor cycling stability. Herein, a new molecular design strategy was developed to address the dissolution issue of 9,10-anthraquinone (AQ). An AQ dimer with near-plane molecular structure, 1,4-bis(9,10-anthraquinonyl)benzene (BAQB), was facilely synthesized. The near-plane structure was proved by DFT calculations. It was found that the obtained BAQB was insoluble in ether electrolyte. Compared to AQ, BAQB displayed remarkably enhanced cycling stability. After 100 cycles at 0.2 C, a high capacity retention of 91.6 % was achieved (195 mAh g^-1 ). BAQB also exhibited excellent rate performance (138 mAh g^-1 at 10 C). The results demonstrate the effectiveness of the near-plane molecular design concept. This work provides a new idea for rational molecular design to inhibit the dissolution of conjugated carbonyl-based organic electrode materials.

Molecular Design Strategies for Electrochemical Behavior of Aromatic Carbonyl Compounds in Organic and Aqueous Electrolytes

To sustainably satisfy the growing demand for energy, organic carbonyl compounds (OCCs) are being widely studied as electrode active materials for batteries owing to their high capacity, flexible structure, low cost, environmental friendliness, renewability, and universal applicability. However, their high solubility in electrolytes, limited active sites, and low conductivity are obstacles in increasing their usage. Here, the nucleophilic addition reaction of aromatic carbonyl compounds (ACCs) is first used to explain the electrochemical behavior of carbonyl compounds during charge-discharge, and the relationship of the molecular structure and electrochemical properties of ACCs are discussed. Strategies for molecular structure modifications to improve the performance of ACCs, i.e., the capacity density, cycle life, rate performance, and voltage of the discharge platform, are also elaborated. ACCs, as electrode active materials in aqueous solutions, will become a future research hotspot. ACCs will inevitably become sustainable green materials for batteries with high capacity density and high power density.

Porous diatomite-mixed 1,4,5,8-NTCDA nanowires as high-performance electrode materials for lithium-ion batteries

A porous composite electrode composed of diatomite-mixed 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA) is prepared by electrostatic spinning technology. Compared with traditional coated electrodes without diatomite mixing, the obtained composite electrode materials have higher porosity, larger specific surface area and faster lithium ion transport channels, which makes them exhibit better electrochemical performance, such as smaller impedance, higher capacity, and better cycling stability and rate performance. The electrospun diatomite-mixed 1,4,5,8-NTCDA composite (ED-1,4,5,8-NTCDA) electrode shows an initial coulombic efficiency of 77.2%, which is much higher than that of the electrospun 1,4,5,8-NTCA (E-1,4,5,8-NTCDA) electrode without diatomite mixing (63.8%) and the coated 1,4,5,8-NTCA (C-1,4,5,8-NTCDA) electrode (48.3%). Moreover, the ED-1,4,5,8-NTCDA electrode displays an initial discharge capacity of 1106.5 mA h g-1, which is much higher than that of the E-1,4,5,8-NTCDA electrode (546.0 mA h g-1) and the C-1,4,5,8-NTCDA electrode (185.4 mA h g-1). After 200 cycles, the capacity of the ED-1,4,5,8-NTCDA electrode remains at 1008.5 mA h g-1 with a retention ratio of 91.2%, which is also much higher than that of 753.2 mA h g-1 for the E-1,4,5,8-NTCDA electrode and 288.1 mA h g-1 for the C-1,4,5,8-NTCDA electrode. Even at a higher current density of 1500 mA g-1, its capacity remains above 508.9 mA h g-1. The ED-1,4,5,8-NTCDA electrode presents superior performance, which opens up a promising new approach for further utilization of organic materials as electrode materials in rechargeable lithium-ion batteries.

Recent Progress on Organic Electrodes Materials for Rechargeable Batteries and Supercapacitors

Rechargeable batteries are essential elements for many applications, ranging from portable use up to electric vehicles. Among them, lithium-ion batteries have taken an increasing importance in the day life. However, they suffer of several limitations: safety concerns and risks of thermal runaway, cost, and high carbon footprint, starting with the extraction of the transition metals in ores with low metal content. These limitations were the motivation for an intensive research to replace the inorganic electrodes by organic electrodes. Subsequently, the disadvantages that are mentioned above are overcome, but are replaced by new ones, including the solubility of the organic molecules in the electrolytes and lower operational voltage. However, recent progress has been made. The lower voltage, even though it is partly compensated by a larger capacity density, may preclude the use of organic electrodes for electric vehicles, but the very long cycling lives and the fast kinetics reached recently suggest their use in grid storage and regulation, and possibly in hybrid electric vehicles (HEVs). The purpose of this work is to review the different results and strategies that are currently being used to obtain organic electrodes that make them competitive with lithium-ion batteries for such applications.

Improvement of the electrochemical and singlet fission properties of anthraquinones by modification of the diradical character

Quantum chemistry is employed to estimate the effects that the structural modification of 1,5- and 9,10-anthraquinones produces in their electronic structure, in the pursuit of a common strategy to improve the electrochemical and singlet fission features on conjugated quinones.

Recent Progress in Organic Electrodes for Li and Na Rechargeable Batteries

Organic rechargeable batteries, which use organics as electrodes, are excellent candidates for next-generation energy storage systems because they offer design flexibility due to the rich chemistry of organics while being eco-friendly and potentially cost efficient. However, their widespread usage is limited by intrinsic problems such as poor electronic conductivity, easy dissolution into liquid electrolytes, and low volumetric energy density. New types of organic electrode materials with various redox centers or molecular structures have been developed over the past few decades. Moreover, research aimed at enhancing electrochemical properties via chemical tuning has been at the forefront of organic rechargeable batteries research in recent years, leading to significant progress in their performance. Here, an overview of the current developments of organic rechargeable batteries is presented, with a brief history of research in this field. Various strategies for improving organic electrode materials are discussed with respect to tuning intrinsic properties of organics using molecular modification and optimizing their properties at the electrode level. A comprehensive understanding of the progress in organic electrode materials is provided along with the fundamental science governing their performance in rechargeable batteries thus a guide is presented to the optimal design strategies to improve the electrochemical performance for next-generation battery systems.

Molecular Engineering with Organic Carbonyl Electrode Materials for Advanced Stationary and Redox Flow Rechargeable Batteries

Organic carbonyl electrode materials that have the advantages of high capacity, low cost and being environmentally friendly, are regarded as powerful candidates for next-generation stationary and redox flow rechargeable batteries (RFBs). However, low carbonyl utilization, poor electronic conductivity and undesired dissolution in electrolyte are urgent issues to be solved. Here, we summarize a molecular engineering approach for tuning the capacity, working potential, concentration of active species, kinetics, and stability of stationary and redox flow batteries, which well resolves the problems of organic carbonyl electrode materials. As an example, in stationary batteries, 9,10-anthraquinone (AQ) with two carbonyls delivers a capacity of 257 mAh g^-1 (2.27 V vs Li⁺ /Li), while increasing the number of carbonyls to four with the formation of 5,7,12,14-pentacenetetrone results in a higher capacity of 317 mAh g^-1 (2.60 V vs Li⁺ /Li). In RFBs, AQ, which is less soluble in aqueous electrolyte, reaches 1 M by grafting -SO₃ H with the formation of 9,10-anthraquinone-2,7-disulphonic acid, resulting in a power density exceeding 0.6 W cm^-2 with long cycling life. Therefore, through regulating substituent groups, conjugated structures, Coulomb interactions, and the molecular weight, the electrochemical performance of carbonyl electrode materials can be rationally optimized. This review offers fundamental principles and insight into designing advanced carbonyl materials for the electrodes of next-generation rechargeable batteries.

In Situ Growth and Wrapping of Aminoanthraquinone Nanowires in 3 D Graphene Framework as Foldable Organic Cathode for Lithium-Ion Batteries

Small conjugated carbonyl compounds are intriguing candidates for organic electrode materials because of their abundance, high theoretical capacity, and adjustable molecular structure. However, their dissolution in aprotic electrolytes and poor conductivity eclipse them in terms of practical capacity, cycle life, and rate capability. Herein, we report a foldable and binder-free nanocomposite electrode consisting of 2-aminoanthraquinone (AAQ) nanowires wrapped within the 3 D graphene framework, which is prepared through antisolvent crystallization followed by a facile chemical reduction and selfassembly process. The nanocomposite exhibited a very high capacity of 265 mA h g^-1 at 0.1 C for AAQ, realizing 100 % utilization of active material. Furthermore, the nanocomposite shows superior cycling stability (82 % capacity retention after 200 cycles at 0.2 C and 76 % capacity retention after 1000 cycles at 0.4 C) and excellent rate performance (153 mA h g^-1 at 5 C). Particularly, the nanocomposite can deliver the highest capacity of 165 mA h g^-1 among all reported anthraquinone- and anthraquinone-analogues-based electrodes per mass of the whole electrode, which is essential for practical application. Such outstanding electrochemical performance could be largely attributed to the wrapping structure of the flexible composite, which provides both conductivity and structural integrity.

Heteroaromatic organic compound with conjugated multi-carbonyl as cathode material for rechargeable lithium batteries

The heteroaromatic organic compound, N,N’-diphenyl-1,4,5,8-naphthalenetetra- carboxylic diimide (DP-NTCDI-250) as the cathode material of lithium batteries is prepared through a simple one-pot N-acylation reaction of 1,4,5,8-naphthalenetetra-carboxylic dianhydride (NTCDA) with phenylamine (PA) in DMF solution followed by heat treatment in 250 °C. The as prepared sample is characterized by the combination of elemental analysis, NMR, FT-IR, TGA, XRD, SEM and TEM. The electrochemical measurements show that DP-NTCDI-250 can deliver an initial discharge capacity of 170 mAh g⁻¹ at the current density of 25 mA g⁻¹. The capacity of 119 mAh g⁻¹ can be retained after 100 cycles. Even at the high current density of 500 mA g⁻¹, its capacity still reaches 105 mAh g⁻¹, indicating its high rate capability. Therefore, the as-prepared DP-NTCDI-250 could be a promising candidate as low cost cathode materials for lithium batteries.