Electrodeposited Pd-Ni-Mo film as a cathode material for hydrogen evolution reaction

A unique one-pot strategy for PdH0.706 nanoparticles with enhanced stability and activity towards the ethanol oxidation reaction

We present a novel and universal solvothermal method for fabricating high-hydrogen-content PdH0.706 nanoparticles, which demonstrate 1.53 A mg-1 ethanol oxidation activity, 1.39 and 1.76 times higher than hydrogen-free Pd and commercial Pd black, respectively, along with superior stability and CO tolerance under alkaline conditions.

Hydrogen-bonded linear chain assemblies of palladium(II)-selenoether complexes: solid state aggregates as templates for nano-structural Pd17Se15 leading to efficient electrocatalytic activity

A analogous series of 2-(3,5-dimethylpyrazol-1-yl)phenyl substituted selenoether complexes of palladium [PdCl2(RSeC6H4dmpz)]; (R = CH2COOH (1), CH2CH2COOH (2), and CH2CH2OH (3); dmpz = dimethylpyrazole) were ably synthesized in a facile manner and exhaustively characterized. Insight into molecular structures of these complexes was keenly probed through single crystal X-ray diffraction (XRD) analysis, unfolding the structural scaffolds and laying into molecular aggregation, availed through hydrogen bonding interactions borne out of tethered protic groups. The complexes were converted to capping free palladium selenide (Pd17Se15) nanoparticles through pyrolysis and evaluated for their electrocatalytic efficacy towards the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. In an alkaline medium, PSNP1 (Pd17Se15) obtained from the hydrogen bonded aggregate of complex PdCl2L1 (1) produced good HER activity. PSNP1 had a little decrease in current density after 300 continuous cycles, which proves that the catalyst presents high stability in the recycling process. For the electrocatalytic oxidation of CH3OH, the electrocatalytic rate constant (k) obtained was 0.3 × 103 cm3 mol-1 s-1.

Waste plastics derived nickel-palladium alloy filled carbon nanotubes for hydrogen evolution reaction

Carbon nanotubes (CNTs) composed of bimetallic nickel-palladium (NiPd) nanoparticles encapsulated in graphitic carbon shells (NdPd@CNT) are prepared by the chemical vapour deposition method using waste polyethylene terephthalate (PET) plastic carbon sources and NiPd-decorated carbon sheets (NiPd@C) catalyst. The characterization results reveal that the face-centered cubic crystalline (fcc)-structured NiPd bimetallic alloy nanoparticles are encased by thin carbon nanotubes. The bimetallic synergism of NiPd nanoparticles actuates the outer CNT layers and accelerates the electrical conductivity, stimulating the electrochemical activity toward an effective hydrogen evolution reaction (HER). By virtue of the collective individualities of highly conductive aligned carbon walls and bimetallic active sites, the NiPd@CNT-equipped HER delivers a minimum overpotential of 87 mV and a Tafel slope value of 95 mV dec-1. The existing intact contact between NiPd and CNT facilitates continuous electron and ion transportation and firm stability toward long-term hydrogen production in HER. Notably, the NiPd@CNT reported here produces excellent electrochemical activity with minimal charge transference resistance, substantiating the efficacy of NiPd@CNT for futuristic green hydrogen production.

Bilayer Heterogeneous Cation Exchange Membrane with Polyaniline Modified Homogeneous Layer: Preparation and Electrotransport Properties

A bilayer membrane based on a heterogenous cation exchange membrane with a homogeneous cation exchange layer and a polyaniline on its surface is prepared. The intercalation of polyaniline into the membrane with a homogeneous cation exchange layer is performed by oxidative polymerization of aniline. The influence of the homogeneous cation exchange layer and the polyaniline on the structure, conductivity, diffusion permeability, selectivity, and current-voltage curve of the heterogeneous cation exchange membrane is established. Membrane properties are studied in the HCl, NaCl, and CaCl2 solutions. The homogeneous cation exchange layer has a negligible effect on the transport properties of the initial heterogeneous membrane. The polyaniline synthesis leads to a decrease in the macropore volume in the membrane structure, conductivity, and diffusion permeability. The counterion transport number in the bilayer membrane is significantly reduced in a solution of calcium chloride and practically does not change in sodium chloride and hydrochloric acid. In addition, the asymmetry of the diffusion permeability and shape of current-voltage curve depending on the orientation of the membrane surface to the flux of electrolyte or counterion are found.

Advances in the synthesis and applications of 2D MXene-metal nanomaterials

MXenes, two-dimensional (2D) materials that consist of transition metal carbides, nitrides and/or carbonitrides, have recently attracted much attention in energy-related and biomedicine fields. These materials have substantial advantages over traditional carbon graphenes: they possess high conductivity, high strength, excellent chemical and mechanical stability, and superior hydrophilic properties. Furthermore, diverse functional groups such as -OH, -O, and -F located on the surface of MXenes aid the immobilization of numerous noble metal nanoparticles (NP). Therefore, 2D MXene composite materials have become an important and convenient option of being applied as support materials in many fields. In this review, the advances in the synthesis (including morphology studies, characterization, physicochemical properties) and applications of the currently known 2D MXene-metal (Pd, Ag, Au, and Cu) nanomaterials are summarized based on critical analysis of the literature in this field. Importantly, the current state of the art, challenges, and the potential for future research on broad applications of MXene-metal nanomaterials have been discussed.

The facile synthesis of core-shell PtCu nanoparticles with superior electrocatalytic activity and stability in the hydrogen evolution reaction

Pt is the most efficient electrocatalyst for the hydrogen evolution reaction (HER); however, it is a high cost material with scarce resources. In order to balance performance and cost in a Pt-based electrocatalyst, we prepared a series of PtCu bimetallic nanoparticles (NPs) with different Pt/Cu ratios through a facile synthetic strategy to optimize the utilization of Pt atoms. PtCu NPs demonstrate a uniform particle size distribution with exposed (111) facets that are highly active for the HER. A synergetic effect between Pt and Cu leads to electron transfer from Pt to Cu, which is favorable for the desorption of H intermediates. Therefore, the as-synthesized carbon black (CB) supported PtCu catalysts showed enhanced catalytic performance in the HER compared with a commercial Pt/C electrocatalyst. Typically, Pt₁Cu₃/CB showed excellent HER performance, with only 10 mV (acid) and 17 mV (alkaline) overpotentials required to achieve a current density of 10 mA cm^-2. This is because the Pt₁Cu₃ NPs, with a small average particle size (7.70 ± 0.04 nm) and Pt-Cu core and Pt-rich shell structure, display the highest electrochemically active surface area (24.7 m² g_Pt ^-1) out of the as-synthesized PtCu/CB samples. Furthermore, Pt₁Cu₃/CB showed good electrocatalytic stability, with current density drops of only 9.3% and 12.8% in acidic solution after 24 h and in alkaline solution after 9 h, respectively. This study may shed new light on the rational design of active and durable hydrogen evolution catalysts with low amounts of Pt.

Electrochemical performance of porous Ni-alloy electrodes for hydrogen evolution reaction from seawater electrolysis

The hydrogen evolution reaction in seawater is investigated using porous Ni–Cr–Fe, Ni–Fe–Mo, Ni–Fe–C and Ni–Ti electrodes, prepared by elemental powder reactive synthesis methods. The open porosity of the four kinds of electrode materials is 23.05%, 20.47%, 25.27%, and 29.05%, respectively. The electrochemical performance of the four kinds of electrodes has been researched by polarization measurement, cyclic voltammetry and electrochemical impedance spectroscopy. The preliminary results demonstrate that the porous Ni–Cr–Fe electrode has superior catalytic activity and relatively good long-term stability for hydrogen evolution reaction in seawater. The high efficiency and reasonable stability of the porous Ni–Cr–Fe electrode catalyst demonstrate its promising applications in the rising hydrogen revolution.

The hydrogen evolution reaction in seawater is investigated using porous Ni–Cr–Fe, Ni–Fe–Mo, Ni–Fe–C and Ni–Ti electrodes, prepared by elemental powder reactive synthesis methods.

Alkaline water-splitting reactions over Pd/Co-MOF-derived carbon obtained via microwave-assisted synthesis

Cobalt-based metal-organic framework-derived carbon (MOFDC) has been studied as a new carbon-based support for a Pd catalyst for electrochemical water-splitting; i.e., the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline medium. The study shows a high increase in the HER activity, in terms of low onset overpotential (onset η = 35 mV vs. RHE), high exchange current density (j o,s ≈ 0.22 mA cm-2), high mass activity (j o,m ≈ 59 mA mg-1), high kinetic current (j K ≈ 5-8 mA cm-2) and heterogeneous rate constant (k 0 ≈ 4 × 10-4 cm s-1), which are attributed to the high porosity of MOFDC and contribution from residual Co, while the large Tafel slope (b c = 261 mV dec-1) is ascribed to the high degree of hydrogen adsorption onto polycrystalline Pd as a supplementary reaction step to the suggested Volmer-Heyrovsky mechanism. These values for the catalyst are comparable to or better than many recent reports that adopted nano-carbon materials and/or use bi- or ternary Pd-based electrocatalysts for the HER. The improved HER activity of Pd/MOFDC is associated with the positive impact of MOFDC and residual Co on the Pd catalyst (i.e., low activation energy, E A ≈ 12 kJ mol-1) which allows for easy desorption of the Hads to generate hydrogen. Moreover, Pd/MOFDC displays better OER activity than its analogue, with lower onset η (1.29 V vs. RHE) and b a (≈78 mV dec-1), and higher current response (ca. 18 mA cm-2). Indeed, this study provides a new strategy of designing and synthesizing MOFDC with physico-chemical features for Pd-based electrocatalysts that will allow for efficient electrochemical water-splitting processes.

Preparation and characterization of electrodeposited Ni-Ru alloys: morphological and catalytic study

Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.

An overview on Pd-based electrocatalysts for the hydrogen evolution reaction

The electrochemical hydrogen evolution reaction (HER) is a well-studied reaction which involves the reduction of protons for hydrogen production. Pd-based compounds are expected to have activity on par with or better than the expensive state-of-the-art Pt and can be considered as the future materials for the HER.

PdCu@Pd Nanocube with Pt-like Activity for Hydrogen Evolution Reaction

The electronic properties of metal surfaces can be modulated to weaken the binding energy of adsorbed H-intermediates on the catalyst surface, thus enhancing catalytic activity for the hydrogen evolution reaction (HER). Here we first prepare PdCu alloy nanocubes (NCs) by coreduction of Cu(acac)₂ (acac = acetylacetonate) and Na₂PdCl₄ in the presence of oleylamine (OAm) and trioctylphosphine (TOP). The PdCu NC coated glassy carbon electrode is then anodized at a constant potential of 0.51 V vs Ag/AgCl at room temperature in 0.5 M H₂SO₄ solution for 10 s, which converts PdCu NCs into core@shell PdCu@Pd NCs that show much enhanced Pt-like activity for the HER and much more robust durability. The improvements in surface property and HER activity are rationalized based on strain and ligand effects that enhance the activity of the edge-exposed Pd atoms on core@shell PdCu@Pd structure. This work opens up a new perspective for simultaneously reducing metal Pd cost and achieving excellent performance toward the HER.

Ni–reduced graphene oxide composite cathodes with new hierarchical morphologies for electrocatalytic hydrogen generation in alkaline media

Ni–reduced graphene oxide (rGO) composite cathodes were successfully prepared by composite electrodeposition under supergravity fields.

A new stable Pd–Mn3O4 nanocomposite as an efficient electrocatalyst for the hydrogen evolution reaction

A galvanic exchange reaction-mediated one-pot synthesis of Pd–Mn₃O₄ nanocomposites for excellent electrocatalytic activity and stability towards the hydrogen evolution reaction.

Porous Ni–Cr–Fe alloys as cathode materials for the hydrogen evolution reaction

We report porous Ni–Cr–Fe cathode materials which possess high stability during prolonged electrolysis and good corrosion resistance in 6 M KOH, exhibiting promising characteristics as cathodes for the HER on an industrial scale.

A novel approach for the preparation of Ni–CeO2 composite cathodes with enhanced electrocatalytic activity

In this work, supergravity fields were utilized to prepare Ni–CeO₂ composite cathodes from a nickel sulphamate bath containing suspended nano-sized CeO₂ particles.