Solvothermal synthesis of reduced graphene oxide/Au nanocomposite-modified electrode for the determination of inorganic mercury and electrochemical oxidation of toxic phenolic compounds

Multifunctional Dy2NiMnO6/Reduced Graphene Oxide Nanocomposites and Their Catalytic, Electromagnetic Shielding, and Electrochemical Properties

Multifunctional nanocomposites have shown great interest in clean energy systems and environmental applications in recent years. Herein, we first reported the synthesis of Dy2NiMnO6 (DNMO)/reduced graphene oxide (rGO) nanocomposites utilizing a hybrid approach involving sol-gel and solvothermal processes. Subsequently, we investigated these nanocomposites for their applications in catalysis, electromagnetic interference shielding, and supercapacitors. A morphological study suggests spherical-shaped DNMO nanoparticles of an average size of 382 nm that are uniformly distributed throughout the surface without any agglomeration. The as-prepared nanocomposites were used as catalysts to investigate the catalytic reduction of 4-nitrophenol in the presence of NaBH4. DNMO/rGO nanocomposites demonstrate superior catalytic activity when compared with bare DNMO, with the rate of reduction being influenced by the composition of the DNMO/rGO nanocomposites. In addition, novel multifunctional DNMO/rGO was incorporated into polyvinylidene difluoride (PVDF) to develop a flexible nanocomposite for electromagnetic shielding applications and exhibited a shielding effectiveness of 6 dB with 75% attenuation at a frequency of 8.5 GHz compared to bare PVDF and PVDF-DNMO nanocomposite. Furthermore, the electrochemical performance of DNMO/rGO nanocomposites was investigated as an electrode material for supercapacitors, exhibiting the highest specific capacitance of 260 F/g at 1 A/g. These findings provide valuable insights into the design of DNMO/rGO nanocomposites with remarkable performance in sustainable energy and environmental applications.

Effectively Reinforced α-Bi2O3 MPs/PDA-RGO Sensor for Selective Modality Sensing of a Hazardous Phenolic Compound

The phenolic compound trichlorophenol (TCP) is an ingredient in fungicides and herbicides. This compound's high stability, bioaccumulation, toxicity, and poor biodegradability result in severe environmental and biological health issues. Consequently, it is crucial to have an affordable and sensitive method for detecting TCP in environmental samples. In this study, α-phase bismuth oxide microplates and polydopamine-functionalized reduced graphene oxide (α-Bi2O3 MPs/PDA-RGO) were synthesized using a simple ultrasonic method and characterized with various analytical and physical characterizations. The conversion of the catechol moieties present in the resulting PDA-RGO material into quinones facilitates productive interactions with diverse functional groups, such as hydroxyl, amine, and imine. Consequently, the compounds 2,4,6-trichlorophenol (TCP) engages in electrochemical interactions with the aforementioned functional groups. As a result, TCP shows more excellent selectivity on the designed α-Bi2O3 MPs/PDA-RGO/SPCE sensor. Under the optimized conditions, the sensor demonstrated a lower detection limit (0.0042 μM), a limit of quantification (0.0078 μM), good sensitivity (2.24 μA μM-1 cm2), a wide linear range (0.019-190.7 and 212.7-1649 μM), and pinpoint specificity. The efficacy of the sensor is additionally validated through the accurate identification of TCP residues in water, soil, and food samples.

Platinum-Functionalized Graphene Oxide: One-Pot Synthesis and Application as an Electrocatalyst

This paper presents the preparation of platinum on a reduced graphene oxide matrix (PtrGO) using the microwave-assisted method with three different pH solutions. The platinum concentration determined by energy-dispersive X-ray analysis (EDX) was 4.32 (weight%), 2.16 (weight %) and 5.70 (weight%), corresponding to pH 3.3, 11.7 and 7.2, respectively. Pt functionalization of reduced graphene oxide (rGO) decreased the rGO specific surface, as shown by Brunauer, Emmett and Teller (BET) analysis. An XRD spectrum of platinum-decorated reduced graphene oxide (rGO) showed the presence of the associated phases of rGO and centered cubic platinum peaks. An oxygen reduction reaction (ORR) electrochemical characterization performed using the rotating disk electrode (RDE) method showed that in PtGO1 synthetized in an acidic environment, with 4.32 Pt (weight%) determined by EDX, platinum is much more dispersed, which explains its better electrochemical oxygen reduction reaction performance. Koutecky-Levich (K-L) plots calculated at different potentials prove a good linear relationship. Electron transfer numbers (n) determined from the K-L plots are between 3.1 and 3.8, which confirms that the ORR for all the samples can be regarded as first-order reaction kinetics of O₂ concentration formed on the Pt surface during ORR.

A highly sensitive electrochemical biosensor for Hg2+ based on entropy-driven DNA walker-based amplification

Herein, a sensitive electrochemical biosensor based on an enzyme-free and entropy-driven DNA walker is presented for the determination of Hg²⁺. This biosensor uses Hg²⁺ as a key to induce a mismatch between thymine-rich oligonucleotides to start the DNA walker, and it utilizes the entropy change of the sensing system to continuously drive the hybridization of oligonucleotides as a driving force for its walking. As the DNA walker runs, the detection signal is amplified to improve the sensitivity of the biosensor. Square wave voltammetry (SWV) of this biosensor shows a linear response of the methylene blue (MB) oxidation signal with an increase of Hg²⁺ concentration in the range of 0 to 80 nM with a detection limit of 0.136 nM, which satisfactorily meets the sensitivity requirement of the U.S. Environmental Protection Agency (EPA). The biosensor also exhibits excellent selectivity over a spectrum of interfering ions and performs well in real water samples, suggesting that it is a promising candidate for Hg²⁺ detection.

Evaluation of N doped rGO-ZnO-CoPc(COOH)8 nanocomposite in cyanide degradation and its bactericidal activities

In the present study, an attempt has been made to design a solar light driven N-rGO-ZnO- CoPc(COOH)₈ nanocomposite for the degradation of cyanide. The morphological and structural characterization of the synthesized nanocomposite was performed by XRD, FT-IR, XPS, UV-vis DRS, FESEM, TEM, EDS, PL spectra and BET surface area. The results revealed that almost 91% degradation and 86% toxicity removal occurred at 25 mgL^-1 of initial cyanide concentration by the N-rGO-ZnO-CoPc(COOH)₈ nanocomposite under illumination of solar light within 120 min. Analysis of free radicals reveals that the generation of OH^. radicals was the predominant species in the photocatalytic degradation process. The cyanide degradation follows pseudo-first order kinetics. The estimated apparent rate constant (K_app) of the above nanocomposite was 3 times higher than that of the ZnO photocatalyst alone together with a very good recycle activities. This might be due to the application of metallpthalocyanine photosensitizer CoPc(COOH)₈ which enhances the rate of visible light absorption efficiency and activates the higher band gap ZnO photocatalyst under visible light. In addition, the presence of residual oxygen in N-rGO also promotes nucleation and anchor sites for interfacial contact between ZnO and N-rGO for effective charge transfer. Further, the N-rGO-ZnO-CoPc(COOH)₈ photocatalytic system showed significant antibacterial activities against mixed culture systems. Therefore, the N-rGO-ZnO-CoPc(COOH)₈ nanocomposite may be an alternative solar light driven photocatalyst system for the removal of cyanide from the wastewater along with its strong disinfectant activities.

Recent Advancement in Disposable Electrode Modified with Nanomaterials for Electrochemical Heavy Metal Sensors

Heavy metal pollution has gained global attention due to its high toxicity and non-biodegradability, even at a low level of exposure. Therefore, the development of a disposable electrode that is sensitive, simple, portable, rapid, and cost-effective as the sensor platform in electrochemical heavy metal detection is vital. Disposable electrodes have been modified with nanomaterials so that excellent electrochemical properties can be obtained. This review highlights the recent progress in the development of numerous types of disposable electrodes modified with nanomaterials for electrochemical heavy metal detection. The disposable electrodes made from carbon-based, glass-based, and paper-based electrodes are reviewed. In particular, the analytical performance, fabrication technique, and integration design of disposable electrodes modified with metal (such as gold, tin and bismuth), carbon (such as carbon nanotube and graphene), and metal oxide (such as iron oxide and zinc oxide) nanomaterials are summarized. In addition, the role of the nanomaterials in improving the electrochemical performance of the modified disposable electrodes is discussed. Finally, the current challenges and future prospect of the disposable electrode modified with nanomaterials are summarized.

Sensitive and selective determination of trace amounts of mercury ions using a dimercaprol functionalized graphene quantum dot modified glassy carbon electrode

A novel nanomaterial is synthesized based on the functionalization of graphene quantum dot with dimercaprol (GQD-DMC). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (TEM) are used to approve the successful synthesis of GQD-DMC. The synthesized nanomaterial is used as an electrode modifier for the sensitive and selective determination of mercury(ii) ions in real water samples. The method of evaluation is based on the pre-concentration of mercury ions on the GQD-DMC modified glassy carbon electrode, reduction of Hg(ii), and anodic stripping voltammetric measurement of these reduced ions in a buffer solution. The pre-concentration of mercury ions is driven by the affinity interaction between the surface containing functional groups of DMC and Hg(ii) ions. The GQD-DMC modified glassy carbon electrode (GQD-DMC/GCE) shows extra sensitivity and selectivity for mercury(ii) detection, which is assumed to be due to the increased surface area as well as the presence of sulfur-containing functional groups on the modified structure.

A reusable AuNPS with increased stability applied for fast screening of trace heavy metals in edible and medicinal marine products

Heavy metal pollution in marine environment poses a severe threat to the safety of marine products and is thus causing increasingly concerns in terms of their toxicity and potential health risks pose to human. Due to the complex matrix of marine products, a fast screening method for heavy metals at trace level with low price, reusability, high accuracy and long lifetime is of urgency and necessity for consumers and processing factories. This work described a simplified screening system through the preparation, characterization and particular application of Au nano particle sensor (AuNPS) in the complex marine matrix, the main aim is to significantly increase the stability, sensitivity and lifetime of detection system dedicated to Cu and Hg trace analysis in marine products. It is worth mentioning that, the proposed screening system was characterized through electrochemical experiments and theoretical calculations, which could be a new evidence for selecting the detection system in commercially complex samples. Importantly, the discipline of deposition and oxidative stripping process on AuNPS was explained based on the mechanism of Metal Ion Deficient Layer (MIDL), and illustrated with SEM changes during stripping process, as well as the dissolving-out rate of metals on AuNPS material. Moreover, to further improve the reusability and stability of AuNPS sensor, the complex marine matrix was purified by pre-plating interferences on indium tin oxide glass electrode. The screening system exhibited a liner response in the range of 0.02-0.10 μg mL^-1 for Hg, 0.01-0.10 μg mL^-1 and 0.001-0.01 μg mL^-1 for Cu with the detection limits of 0.138 mg kg^-1 and 1.51 mg kg^-1 in marine matrix, respectively. The sensitivity and lifetime was at least two times better as compared to similar works even after 20-times use. Finally, this proposed analysis system combined with purification procedure was successfully applied for the edible and medicinal marine products analysis, meanwhile, the accuracy and stability were confirmed with standard analytical methods.

Electrochemical synthesis of carbon nano spheres and its application for detection of ciprofloxacin

Carbon nano spheres (CNSs) were synthesized by single step electrochemical synthesis route in ultra-pure water as a medium of synthesis. Characterization of synthesized CNSs was carried out using atomic force microscope (AFM), particle size analyzer, zeta potential analyzer and Fourier Transform Infrared (FTIR) measurements, from which the information about the morphology and functional groups present on the surface of the particles are obtained. The particle size of the CNSs was found to be 6 nm. FTIR spectrum shows the presence of functional groups such as -OH, C≡C, C = C and on the CNSs. Electrochemical and spectroscopic experiments were conducted to determine the interaction of the drug molecule ciprofloxacin (Cf) with CNSs, strong interaction between Cf and CNSs leads to the development of analytical method of detection of Cf using CNSs as the pre-concentrating agent. The detection of limit of the present method is obtained as 0.15 μM at (S/N) ratio of 3. CNSs can be considered as a potential candidate for the fabrication of sensor for high sensitive determination of Cf.

Graphene-derived nanomaterials as recognition elements for electrochemical determination of heavy metal ions: a review

This review (with 155 refs.) summarizes the progress made in the past few years in the field of electrochemical sensors based on graphene-derived materials for the determination of heavy metal ions. Following an introduction of this field and a discussion of the various kinds of modified graphenes including graphene oxide and reduced graphene oxide, the review covers graphene based electrodes modified (or doped) with (a) heteroatoms, (b) metal nanoparticles, (c) metal oxides, (d) small organic molecules, (e) polymers, and (f) ternary nanocomposites. Tables are provided that afford an overview of representative methods and materials for fabricating electrochemical sensors. Furthermore, sensing mechanisms are discussed. A concluding section presents new perspectives, opportunities and current challenges. Graphical Abstract Schematic illustration of electrochemical sensor for heavy metal ion sensing based on heteroatom-doped graphene, metal-modified graphene, metal-oxide-modified graphene, organically modified graphene, polymer-modified graphene, and ternary graphene based nanocomposites.

Conductive electrospun nanofibers containing cellulose nanowhiskers and reduced graphene oxide for the electrochemical detection of mercury(II)

Mercury is a heavy metal highly deleterious for the environment being associated to several diseases. Thus, novel and expedite techniques capable of detecting this heavy metal in water, even at trace levels, are highly sought for human and environmental safety purposes. Here we developed a novel electrochemical sensor for detecting mercury(II) using a green hybrid nanoarchitecture composed of reduced graphene oxide (rGO), cellulose nanowhiskers (CNW) and polyamide 6 (PA6) electrospun nanofibers. Scanning transmission electron microscopy (STEM), ultraviolet-visible (UV-VIS) absorption and Fourier transform infrared (FTIR) spectroscopies and termogravimetric analysis (TGA) were employed to elucidate the morphology and composition of CNW:rGO hybrid system. The hybrid composite proved to enhance charge transference properties, which was evaluated by cyclic voltammetry (CV) experiments. Due to the excellent electrical properties of graphene, the nanocomposite (PA6/CNW:rGO) was applied in the electrochemical detection of very low concentrations of mercury in water samples, improving the sensor sensibility. Moreover, the PA6/CNW/rGO electrode demonstrated stability, high selectivity, low detection limit and wide dynamic linear range for the detection of mercury(II).

The preparation of a flexible AuNP modified carbon cloth electrode and its application in electrochemical detection of Hg(ii) by continuous flow in environmental water

In this article, a carbon cloth composite electrode modified with gold nanoparticles (AuNPs) was prepared by a facile in situ electrodeposition method and applied to the detection of mercury ions in water. With the optimized electrochemical detection conditions and methods, the limit of detection (LOD) was 0.6 μg L^-1 with the linearity ranging from 2 to 200 μg L^-1 by the SWSV detection method, and the electrode showed good repeatability after many cycles. Based on this detection method, a continuous flow electrochemical detection system was constructed and applied to the detection of Hg ions in environmental water samples. The standard addition experimental results of two real water samples with an addition level of 10 and 50 μg L^-1 showed that the recoveries were between 92.4% and 108.9% with RSDs from 2.01% to 3.22%. These results showed the same performance as that of the ZAAS mercury detection method (recovery: 94-102.4%, RSD 2.09-5.4%). Compared with other electrode materials, a shorter detection time, a wider linear range and high stability with a similar LOD can be achieved by a continuous flow detection method by using the composite electrode. The established continuous flow electrochemical detection system would have promising application in online and real-time detection of heavy metals in environmental water.

Electrochemical sensor based on gold nanoparticles/ethylenediamine-reduced graphene oxide for trace determination of fenitrothion in water

AuNP/en-rGO/SPE electrochemical sensor for sensitive determination of fenitrothion in natural waters.