Surface area of nanoporous gold: Effect on temperature

Atomic Level Understanding of the Structural Stability and Catalytic Activity of Nanoporous Gold/Titania Cluster Inverse Catalysts at Ambient and High Temperatures

Nanoporous gold (NPG) exhibits exceptional catalytic performance at low temperatures, but its activity declines at elevated temperatures due to structural coarsening. Loading metal oxide nanoparticles onto NPG can enhance its catalytic activity at high temperatures. In this work, we used NPG-supported titania nanoparticles as a model system (denoted as Ti2O4/NPG) to study their catalytic activity at ambient and high temperatures with CO oxidation as a probe reaction by density functional theory (DFT) calculation and ab initio molecular dynamics (AIMD) simulations. The possible factors that may affect the CO oxidation reaction pathways and energy profiles on the Ti2O4/NPG, such as oxygen vacancies; silver impurities; Mars-van Krevelen (MvK), Eley-Rideal (ER), or trimolecular Eley-Rideal (TER) mechanisms; and catalytic active sites, were comprehensively investigated. The results showed that reaction energy barriers on Ti2O4/NPG were not significantly decreased compared to the pristine NPG, indicating that their catalytic activities at ambient temperature were comparable. At the evaluated temperature (400 °C), the Ti2O4/NPG exhibited superior thermal stability and maintained its active sites, while the NPG reduced active sites due to surface coarsening. The strong oxide-metal interaction (SOMI) effect between the NPG and Ti2O4 nanoparticles is found to be a main factor for the high structural stability and catalytic activity at high temperatures.

Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

Electroless Dealloying of Thin-Film Nanocrystalline Au-Ag Alloys: Mechanisms of Ligament Nucleation and Sources of Its Synthesis Variability

Control of ligament size in nanoporous gold through process inputs in chemical dealloying holds the potential to exploit its size dependent properties in applications in energy and biomedicine. While its morphology evolution is regulated by the kinetics of coarsening, recent studies are focused on the early stage of dealloying (e.g., ∼ 5-42 at. % in residual alloy content) to understand mechanisms of ligament nucleation and its role in altering process-structure relationships. This paper examines this stage in chemical dealloying of nanocrystalline Au₄₉Ag₅₁ thin films and finds that ligaments are nucleated uniformly through its thickness due to the dealloying front rapidly propagating through the thickness of the film. Further, through the establishment of process-structure relationships with large data sets (i.e., 80 samples), this paper quantifies sources of variability that alter the kinetics of ligament growth such as aging of the precursor (e.g., grain growth) and solution evaporation. It is found that ligament diameter is better predicted by the residual silver content rather than by the dealloying time even amidst both effects and independent control of ligament diameter and solid area fraction is demonstrated within a limited window.

Fabrication of Nanoporous Al by Vapor-Phase Dealloying: Morphology Features, Mechanical Properties and Model Predictions

The physical and chemical properties shown by nanoporous metals, related to their unique structure, make them very promising for application in several fields. Recently, vapor-phase dealloying has been reported as a method for the preparation of several non-noble nanoporous metals, alternatively to dealloying in aqueous solutions. Using this approach, we have successfully fabricated nanoporous Al starting from an Al20Zn80 nanocomposite obtained by ball milling. The nanocomposite was annealed at 550 °C under high-vacuum conditions, and the difference in the vapor pressures allowed the selective removal of Zn by vapor-phase dealloying. The morphology of the resulting nanoporous material was analyzed by Scanning Electron Microscopy showing pores from few to thousands of nm; moreover, the nanoporous 3D structure was observed through Serial Block Face-Scanning Electron Microscopy. A specific surface area as high as 73 m2 g−1 was estimated by N2 physisorption measurements. In addition, a fractal model able to well reproduce the morphology of nanoporous Al was built. This model has been used for predicting mechanical properties which are in good agreement with experimental data obtained by nanoindentation.

Datasets for the microstructure of nanoscale metal network structures and for its evolution during coarsening

The datasets in this work are files containing atom position coordinates of volume elements approximating nanoporous gold made by dealloying and annealing. The material is represented in an as-prepared state and in various stages of coarsening, as described in Phys. Rev. Mater, 3 (2019) 076001. Realistic initial structures of different solid fractions have been constructed by the leveled-wave algorithm, approximating mixtures at the end of early-stage spinodal decomposition. The microstructural evolution during coarsening by surface diffusion was approximated by on-lattice kinetic Monte-Carlo simulation. The data sets refer to solid fractions from 0.22 to 0.50, providing for different initial connectivity of the bicontinuous structures. Coarsening at two temperatures, 900 K and 1800 K, explores two different degrees of surface energy anisotropy - more faceted at 900 K and more rough at 1800 K. Each structure takes the form of a face-centred cubic lattice with approximately 32 million sites. A site can be occupied by either void or atom. 3D periodic boundary conditions are satisfied. Tables list each structure's properties, and specifically the specific surface area, two different measures for the ligament size, the net topological genus as well as the scaled genus. The atom coordinate files may serve as the basis for geometry analysis and for atomistic as well as finite element simulation studies of nanoporous as well as spinodally decomposed materials. The data sets are accessible via the TORE repository at http://hdl.handle.net/11420/3253.