Molecularly imprinted polyaniline-ferrocene-sulfonic acid-Carbon dots modified pencil graphite electrodes for chiral selective sensing of D-Ascorbic acid and L-Ascorbic acid: A clinical biomarker for preeclampsia

Fluorescence and colorimetric rapid dual-signal "on-off-on" switching detection of ascorbic acid based on TSPP/DCIP

A fluorescence and colorimetric dual-signal sensing system for the determination of ascorbic acid (AA) in complex media was developed by using 5,10,15, 20-tetrakis(4-sulfonyl) porphyrin (TSPP) as a sensing probe and sodium 2,6-dichloroindophenol (DCIP) as a bridge. A fluorescence resonance energy transfer (FRET) effect occurred when DCIP was added to the TSPP solution, resulting in the quenching of the fluorescence signal of TSPP and a change in the color of the solution from pink to blue. The DCIP in the system reacted with AA in a redox reaction to produce colorless phenol imine, the color of the solution changed from blue to green causing an obvious colorimetric response, and the TSPP/DCIP sensing system's fluorescence signal restored owing to AA introduced. The fluorescence method for AA showed good linearity in the ranges 0.08 mM ~ 1 mM and 1 mM ~ 43.6 mM with a detection limit of 6.4 μM. And the colorimetric method for AA showed excellent linearity in the range 0.46 mM ~ 40.2 mM with a detection limit of 76.0 μM. The constructed "dual-signal" probe in the study has been successfully applied to the detection of AA in practical samples. The method proposed has great potential for practical applications and provides new ideas for the visual inspection of portable measurements.

Wearable and Implantable Cortisol-Sensing Electronics for Stress Monitoring

Cortisol is a steroid hormone that is released from the body in response to stress. Although a moderate level of cortisol secretion can help the body maintain homeostasis, excessive secretion can cause various diseases, such as depression and anxiety. Conventional methods for cortisol measurement undergo procedures that limit continuous monitoring, typically collecting samples of bodily fluids, followed by separate analysis in a laboratory setting that takes several hours. Thus, recent studies demonstrate wearable, miniaturized sensors integrated with electronic modules that enable wireless real-time analysis. Here, the primary focus is on wearable and implantable electronic devices that continuously measure cortisol concentration. Diverse types of cortisol-sensing techniques, such as antibody-, DNA-aptamer-, and molecularly imprinted polymer-based sensors, as well as wearable and implantable devices that aim to continuously monitor cortisol in a minimally invasive fashion are discussed. In addition to the cortisol monitors that directly measure stress levels, other schemes that indirectly measure stress, such as electrophysiological signals and sweat are also summarized. Finally, the challenges and future directions in stress monitoring and management electronics are reviewed.

Ascorbic Acid-Caused Quenching Effect of Protein Clusteroluminescence Probe: The Fast Fluorescent Detection of Ascorbic Acid in Vegetables

It is interesting and meaningful to explore fluorescent probes for novel rapid detection methods. In this study, we discovered a natural fluorescence probe, bovine serum albumin (BSA), for the assay of ascorbic acid (AA). Due to clusterization-triggered emission (CTE), BSA has the character of clusteroluminescence. AA shows an obvious fluorescence quenching effect on BSA, and the quenching effect increases with increasing concentrations of AA. After optimization, a method for the rapid detection of AA is established by the AA-caused fluorescence quenching effect. The fluorescence quenching effect reaches saturation after 5 min of incubation time and the fluorescence is stable within more than one hour, suggesting a rapid and stable fluorescence response. Moreover, the proposed assay method shows good selectivity and a wide linear range. To further study the mechanisms of AA-caused fluorescence quenching effect, some thermodynamic parameters are calculated. The main intermolecular force between BSA and AA is electrostatic, presumably leading to the inhibiting CTE process of BSA. This method also shows acceptable reliability for the real vegetable sample assay. In summary, this work will not only provide an assay strategy for AA, but also open an avenue for the application expansion of CTE effect of natural biomacromolecules.

Competitive Self-Assembly Interaction between Ferrocenyl Units and Amino Acids for Entry into the Cavity of β-Cyclodextrin for Chiral Electroanalysis

At present, chiral electroanalysis of nonelectroactive chiral compounds still remains a challenge because they cannot provide an electrochemical signal by themselves. Here, a strategy based on a competitive self-assembly interaction of a ferrocene (Fc) unit and the testing isomers entering into the cavity of β-cyclodextrin (β-CD) was carried out for chiral electroanalysis. First of all, the Fc derivative was directly bridged to silica microspheres, followed by inclusion into the cavity of β-CD. As expected, once it was modified onto the surface of a carbon working electrode as an electrochemical sensor, SiO₂@Fc-CD-WE, its differential pulse voltammetry signal would markedly decrease compared with the uncovered Fc. Next, when l- and d-isomers of amino acids that included histidine, threonine, phenylalanine, and glutamic acid were examined using SiO₂@Fc-CD-WE, it showed an enantioselective entry of amino acids into the cavity of β-cyclodextrin instead of Fc, resulting in the release of Fc with signal enhancement. For histidine, glutamic acid, and threonine, l-isomers showed a higher peak current response compared with d-isomers. The peak current ratios between l- and d-isomers were 2.88, 1.21, and 1.40, respectively. At the same time, the opposite phenomenon occurred for phenylalanine with a peak current ratio of 3.19 between d- and l-isomers. In summary, we are assured that the recognition strategy based on the supramolecular interaction can enlarge the detection range of chiral compounds by electrochemical analysis.

Recent Developments in Voltammetric Analysis of Pharmaceuticals Using Disposable Pencil Graphite Electrodes

The even growing production of both well-known and new derivatives with pharmaceutical action involves the need for developing facile and reliable methods for the analysis of these compounds. Among the widely used instrumental techniques, the electrochemical ones are probably the simplest and the most rapid, also having good performance characteristics. However, the key tool in electroanalysis is the working electrode. Due to the inherent electrochemical and economic advantages of the pencil graphite electrode (PGE), the interest in its applicability in the analysis of different analytes has continuously increased in recent years. Thus, this paper aims to review the scientific reports published in the last 10 years on the use of the disposable eco- and user-friendly PGEs in the electroanalysis of compounds of pharmaceutical importance in different matrices. The PGE characteristics and designs (bare or modified with various types of materials), along with their applications and performance parameters (e.g., linear range, limit of detection, and reproducibility), will be discussed, and their advantages and limitations will be critically emphasized.

Bovine serum albumin-coated titanium dioxide modified electrochemical interface for enantioselective discrimination of D/L-aspartic acid

Due to the similar physicochemical properties, the discrimination of chiral isomers faces huge challenges in drug production and biochemical analysis. Herein, the bovine serum albumin-coated titanium dioxide (bovine serum albumin [BSA]/TiO₂ ) was modified as a novel electrochemical interface for efficient, simple, and enantioselective discrimination of aspartic acid enantiomers (D/L-Asp) based on the electrochemical impedance spectroscopy (EIS). Utilizing the structural characteristics of large cavity and high specific surface area, TiO₂ material provided sufficient space for adequate loading of BSA. The BSA/TiO₂ electrochemical interface was successfully fabricated to support abundant chiral recognition sites. The enantioselective discrimination of D/L-Asp was achieved on the interface with a good linear relationship against the impedance difference in the concentration range from 1 to 1000 nM with the detection limit of 0.37 nM for L-Asp and 0.94 nM for D-Asp, reaching the identification coefficient (I_c  = K_L /K_D ) of 1.85. The proposed interface is easy to form with a stable formation of BSA in TiO₂ microporous architecture, which maintained the desired stability and reproducibility. For the unknown racemic solution, I_c levels of different enantio-ratios of D/L-Asp were effectively obtained to evaluate the chiral percentage of racemic sample. The possible mechanism of chiral recognition by density function theory (DFT) was confirmed with a stronger adsorption to L-Asp in accordance with our experiment results, reinforcing the validity of our presented interface. The BSA/TiO₂ electrochemical interface with robust enantioselective discrimination of D/L-Asp has great potential for the practical application in pharmaceutical surveillance and food security.

Strategies to Achieve a Ferrocene-Based Polymer with Reversible Redox Activity for Chiral Electroanalysis of Nonelectroactive Amino Acids

In the past, various chiral isomers accompanied by electroactive units have been distinguished using electrochemical techniques, which can produce electrochemical signals by themselves. However, it is still difficult to use an electrochemical technique to detect nonelectroactive samples. To address this bottleneck, an electroactive chiral polymer (S,S)-p-CVB-Fc that contains one redox-active ferrocene unit was designed and synthesized in this study. The electroactive polymer can give electrochemical signals as an alternative to the tested chiral samples, regardless of whether the isomers have electroactive units. Then, it was fixed on the surface of a glassy carbon electrode as an electrochemical chiral sensor. When nonelectroactive amino acids including proline, threonine, and alanine were examined by the sensor, clear discrimination in the response of peak current could be observed toward l- and d-isomers at pH 6.5. The peak current ratios (I_L/I_D) for proline and alanine were 1.47 and 1.48, respectively. In contrast, for threonine, the d-isomer exhibited a higher peak current than the l -isomer with a ratio of 2.59. In summary, the results ensure that the current work can enlarge the testing scope of chiral samples in the field of chiral electroanalysis using an electroactive sensor.

Molecularly Imprinted Sensor for Ascorbic Acid Based on Gold Nanoparticles and Multiwalled Carbon Nanotubes

Background:

L-Ascorbic acid (AA) is a kind of water soluble vitamin, which is mainly present in fruits, vegetables and biological fluids. As a low cost antioxidant and effective scavenger of free radicals, AA may help to prevent diseases such as cancer and Parkinson’s disease. Owing to its role in the biological metabolism, AA has also been utilized for the therapy of mental illness, common cold and for improving the immunity. Therefore, it is very necessary and urgent to develop a simple, rapid and selective strategy for the detection of AA in various samples.

Methods:

The molecularly imprinted poly(o-phenylenediamine) (PoPD) film was prepared for the analysis of L-ascorbic acid (AA) on gold nanoparticles (AuNPs) - multiwalled carbon nanotubes (MWCNTs) modified glass carbon electrode (GCE) by electropolymerization of o-phenylenediamine (oPD) and AA. Experimental parameters including pH value of running buffer and scan rates were optimized. Scanning electron microscope (SEM), fourier-transform infrared (FTIR) spectra, cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were utilized for the characterization of the imprinted polymer film.

Results:

Under the selected experimental conditions, the DPV peak currents of AA exhibit two distinct linear responses ranging from 0.01 to 2 μmol L-1 and 2 to 100 μmol L-1 towards the concentrations of AA, and the detection limit was 2 nmol L-1 (S/N=3).

Conclusion:

The proposed electrochemical sensor possesses excellent selectivity for AA, along with good reproducibility and stability. The results obtained from the analysis of AA in real samples demonstrated the applicability of the proposed sensor to practical analysis.

A highly efficient chiral sensing platform for tryptophan isomers based on a coordination self-assembly

Construction of convenient and effective method for enantiomer identification is of vital significance for biochemistry and medical science. Herein, we design an effective sensor for chiral recognition of tryptophan (Trp) enantiomers, and self-assembly of Cu²⁺-modified β-cyclodextrin on poly-L-arginine/multi-walled carbon nanotubes (Cu-β-CD/PLA/MWCNTs) is studied. Meanwhile, Cu²⁺ acts as a cap to prevent the release of the high energy water and compel Trp enantiomer into the smaller opening of β-cyclodextrin. Recognition of L-Trp is accomplished by the formation of hydrogen bonds between the amino of L-Trp and the high energy water confined in cavity of Cu-β-CD. Compared with D-Trp, the sensor exhibits favorable chiral recognition toward L-Trp with a separation coefficient of 3.37. And the chiral sensor presents admirable enantiomers determination with excellent sensitivity, providing a good linear correlation in the range of 1 × 10^-6 M~5.5 × 10^-5 M, and the detection limit can reach 3.3 × 10^-7 M (S/N = 3). Besides, the proposed sensor has been able to predict the percentage of D-Trp in the racemic mixture, suggesting its potential applications in the enantiomer recognition field.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

Enantioselective recognition of ascorbic acid and isoascorbic acid on HS-β-cyclodextrin/gold nanoparticles/hollow carbon microspheres hybrid modified electrodes

The HS-β-cyclodextrin/gold nanoparticles/hollow carbon microspheres hybrids were prepared to develop a simple strategy for electrochemical chiral analysis.