Facile fabrication of supercapacitors with high rate capability using graphene/nickel foam electrode

Advanced materials and technologies for supercapacitors used in energy conversion and storage: a review

Supercapacitors are increasingly used for energy conversion and storage systems in sustainable nanotechnologies. Graphite is a conventional electrode utilized in Li-ion-based batteries, yet its specific capacitance of 372 mA h g−1 is not adequate for supercapacitor applications. Interest in supercapacitors is due to their high-energy capacity, storage for a shorter period and longer lifetime. This review compares the following materials used to fabricate supercapacitors: spinel ferrites, e.g., MFe2O4, MMoO4 and MCo2O4 where M denotes a transition metal ion; perovskite oxides; transition metals sulfides; carbon materials; and conducting polymers. The application window of perovskite can be controlled by cations in sublattice sites. Cations increase the specific capacitance because cations possess large orbital valence electrons which grow the oxygen vacancies. Electrodes made of transition metal sulfides, e.g., ZnCo2S4, display a high specific capacitance of 1269 F g−1, which is four times higher than those of transition metals oxides, e.g., Zn–Co ferrite, of 296 F g−1. This is explained by the low charge-transfer resistance and the high ion diffusion rate of transition metals sulfides. Composites made of magnetic oxides or transition metal sulfides with conducting polymers or carbon materials have the highest capacitance activity and cyclic stability. This is attributed to oxygen and sulfur active sites which foster electrolyte penetration during cycling, and, in turn, create new active sites.

Preparation of Composite Monolith Supercapacitor Electrode Made from Textile-Grade Polyacrylonitrile Fibers and Phenolic Resin

In this work a composite monolith was prepared from widely available and cost effective raw materials, textile-grade polyacrylonitrile (PAN) fibers and phenolic resin. Two activation procedures (physical and chemical) were used to increase the surface area of the produced carbon electrode. Characterization of the thermally stabilized fibers produced was made using differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA) and Carbon-Hydrogen-Nitrogen(CHN) elemental analysis, in order to choose the optimum conditions of producing the stabilized fibers. Characterization of the produced composite monolith electrode was performed using physical adsorption of nitrogen at 77 °K, cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrical resistivity in order to evaluate its performance. All the electrodes prepared had a mixture of micropores and mesopores. Pressing the green monolith during the curing process was found to reduce largely the specific surface area and to some degree the electrical resistivity of the chemically activated composite electrode. Physical activation was more suitable than chemical activation, where it resulted in an electrode with specific capacity 29 F/g, good capacitive behavior and the stability of the electrical resistivity over the temperature range −130 to 80 °C. Chemical activation resulted in a very poor electrode with resistive rather than capacitive properties.

Scalable nanohybrids of graphitic carbon nitride and layered NiCo hydroxide for high supercapacitive performance

The limited number of edge nitrogen atoms and low intrinsic electrical conductivity hinder the supercapacitive energy storage applications of the nitrogen-rich graphitic carbon nitride (g-C3N4). In this study, a novel graphitic carbon nitride/NiCo-layered double hydroxide (CNLDH), a two-dimensional nanohybrid, is prepared by a simple hydrothermal synthesis. The homogeneous interpolation of g-C3N4 nanosheets into NiCo LDH stacked nanosheets effectively increases the overall performances of the g-C3N4/NiCo LDH nanohybrid. The improved morphology of the nanohybrid electrode upon the addition of g-C3N4 to the NiCo LDH yields a specific capacity of 183.43 mA h g-1 in 6 M KOH at 1 A g-1, higher than those of bare g-C3N4 (20.89 mA h g-1) and NiCo LDH (95.92 mA h g-1) electrodes. The excellent supercapacitive performance of the CNLDH nanohybrid is complemented by its low internal resistance, excellent rate capability, and large cycling lifetime. Furthermore, the hybrid supercapacitor is assembled using CNLDH 0.1 as a positive electrode and activated carbon (AC) as a negative electrode. The hybrid supercapacitor device of CNLDH 0.1//AC shows the maximum specific capacity of 37.44 mA h g-1 at 1 A g-1 with remarkable energy density, power density and good cycling performance. This confirms that the CNLDH 0.1 nanohybrid is an excellent electrode material for supercapacitor applications.

Cathode-Introduced Atomic H* for Fe(II)-Complex Regeneration to Effective Electro-Fenton Process at a Natural pH

Promotion of iron solubility using ligands is the preliminary step in the homogeneous electro-Fenton (EF) process at a mild pH, but the chelate efficiencies of most organic ligands are unsatisfactory, resulting in insufficient Fe(II) availability. In this study, atomic H* was, for the first time, introduced to the EF process to accelerate the regeneration of the Fe(II)-complex at a mild pH using a Ni-deposited carbon felt (Ni-CF) cathode. The introduction of atomic H* significantly elevated total organic carbon (TOC) abatement of ciprofloxacin (CIP) from 42% (CF) to 81% (Ni-CF) at a natural pH. In the presence of humic acids (HAs), atomic H* introduced via Ni-CF enhanced the CIP degradation rate to 10 times that of the CF at a mild pH. The electron spin resonance (ESR), density functional theory (DFT) calculations, electrochemical characterization, and in situ electrochemical Raman study clearly demonstrated that the atomic H* generated from the Ni-CF cathode was highly efficient at reducing Fe(III)-complexes at a natural pH. Additionally, the Ni-CF could generate atomic H* without significant nickel leaching. Thus, the atomic H* could continuously facilitate iron cycling and, consequently, enhance pollutant mineralization via the homogeneous EF process at a mild pH in an environmentally friendly manner.

A simple and large-scale method to prepare flexible hollow graphene fibers for a high-performance all-solid fiber supercapacitor

The fabrication of hollow graphene fibers (HGFs) via simple spray deposition of GO on silk fiber templates for a flexible supercapacitor.