Enhanced performance of nitrogen-doped carbon nanotube membrane-based filtration cathode microbial fuel cell

Examining current trends and future outlook of bio-electrochemical systems (BES) for nutrient conversion and recovery: an overview

Nutrient-rich waste streams from domestic and industrial sources and the increasing application of synthetic fertilizers have resulted in a huge-scale influx of reactive nitrogen and phosphorus in the environment. The higher concentrations of these pollutants induce eutrophication and foster degradation of aquatic biodiversity. Besides, phosphorus being non-renewable resource is under the risk of rapid depletion. Hence, recovery and reuse of the phosphorus and nitrogen are necessary. Over the years, nutrient recovery, low-carbon energy, and sustainable bioremediation of wastewater have received significant interest. The conventional wastewater treatment technologies have higher energy demand and nutrient removal entails a major cost in the treatment process. For these issues, bio-electrochemical system (BES) has been considered as sustainable and environment friendly wastewater treatment technologies that utilize the energy contained in the wastewater so as to recovery nutrients and purify wastewater. Therefore, this article comprehensively focuses and critically analyzes the potential sources of nutrients, working mechanism of BES, and different nutrient recovery strategies to unlock the upscaling opportunities. Also, economic analysis was done to understand the technical feasibility and potential market value of recovered nutrients. Hence, this review article will be useful in establishing waste management policies and framework along with development of advanced configurations with major emphasis on nutrient recovery rather than removal from the waste stream.

A novel MnOOH coated nylon membrane for efficient removal of 2,4-dichlorophenol through peroxymonosulfate activation

2,4-Dichlorophenol (2,4-DCP) is a highly toxic water contaminant. In this study, we demonstrate a novel catalytic filtration membrane by coating MnOOH nanoparticles on nylon membrane (MnOOH@nylon) for improved removal of 2,4-DCP through a synergetic "trap-and-zap" process. In this hybrid membrane, the underlying nylon membrane provides high adsorption affinity for 2,4-DCP. While the immobilized MnOOH nanoparticles on the membrane surface provide catalytic property for peroxymonosulfate activation to produce reactive oxygen species (ROS), which migrate with the fluid to the underlying nylon membrane pore channels and react with the adsorbed 2,4-DCP with a much higher rate (0.9575 mg L^-1 min^-1) than that in the suspended MnOOH particle system (0.1493 mg L^-1 min^-1). The forced flow in the small voids of the MnOOH nanoparticle coating layer (< 200 nm) and channels of nylon membrane (~220 nm) is critical to improve the 2,4-DCP adsorption, ROS production, and 2,4-DCP degradation. The hybrid MnOOH@nylon membrane also improves the stability of the MnOOH nanoparticles and the resistibility to competitive anions, due to much higher concentration ratio of the adsorbed 2,4-DCP and produced ROS versus background competitive ions in the membrane phase. This study provides a generally applicable approach to achieve high removal of target contaminants in catalytic membrane processes.

An overview in the development of cathode materials for the improvement in power generation of microbial fuel cells

Since the high cost and low power generation hinder the overall practical application of microbial fuel cells (MFCs), numerous attempts have been made in the field of cathode materials to enhance the electrical performance of MFCs because they directly catalyze the oxygen reduction reactions (ORR). To choose a proper cathode material, following principles such as ORR activity, conductivity, cost-efficiency, durability, surface area, and accessibility should be taken into consideration. In preparation of cathode materials, versatile materials have been chosen, synthesized, or modified to achieve an improvement in power generation of MFCs. The most widely applied cathode materials could be categorized into three classes, namely carbon-base materials, metal-based materials, and biocatalysts. This review summarizes the utilization, development, and the cost of cathode materials applied in MFCs and tries to highlight the effective modification methods of cathode materials which have helped in achieving enhanced power generation of MFCs in recent years.

Prospects of an Electroactive Carbon Nanotube Membrane toward Environmental Applications

Rapid population growth and industrialization have driven the emergence of advanced electrochemical and membrane technologies for environmental and energy applications. Electrochemical processes have potential for chemical transformations, chloralkali disinfection, and energy storage. Membrane separations have potential for gas, fluid, and chemical purification. Electrochemical and membrane technologies are often used additively in the same unit process, e.g., the chloroalkali process where a membrane is used to separate cathodic and anodic products from scavenging each other. However, to access the maximal potential requires intimate hybridization of the two technologies into an electroactive membrane. The combination of the two discrete technologies results in a range of synergisms such as reduced footprint, increased processing kinetics, reduced fouling, and increased energy efficiency.Due to their high specific surface area, excellent electric conductivity, and desirable robustness, 1D carbon nanotubes (CNTs) hold promise for many applications over a range of industry sectors such as a base material for electrodes and membranes. Importantly, CNT morphology and surface chemistry can be rationally modified and fine-tuning of these CNT physicochemical properties can enhance their functionality toward practical applications. The CNT 1D form allows assembly of a stable thin-film fibrous network by a variety of facile techniques. These CNT networks have pore sizes in the range of 10-500 nm (d_pore ∼ 6-8d_CNT) and thicknesses of 10-200 μm, both similar to those of classical polymer membranes, thus allowing for straightforward incorporation into commercial membrane devices modified for electroactivity inclusion.In this Account, CNTs and their composites are used as model electroactive porous materials to exemplify the design strategies and environmental applications of emerging electroactive membrane technology. The Account begins with a brief summary of the electroactive membrane design principles and flow processes developed by our groups. After the methodology section, a detailed discussion is provided on the underlying physical-chemical mechanisms that govern the electroactive membrane technology. Then we summarize our findings on the rational design of several flow-through electrochemical CNT filtration systems focused on either anodic oxidation reactions or cathodic reduction reactions. Subsequently, we discuss a recently discovered electrochemical valence-state-regulation strategy that is capable to detoxify and sequester heavy metal ions. Finally, we conclude the Account with our perspectives toward future development of the electroactive membrane technology.

Dual-Function Electrocatalytic and Macroporous Hollow-Fiber Cathode for Converting Waste Streams to Valuable Resources Using Microbial Electrochemical Systems

Dual-function electrocatalytic and macroporous hollow-fiber cathodes are recently proposed as promising advanced material for maximizing the conversion of waste streams such as wastewater and waste CO₂ to valuable resources (e.g., clean freshwater, energy, value-added chemicals) in microbial electrochemical systems. The first part of this progress report reviews recent developments in this type of cathode architecture for the simultaneous recovery of clean freshwater and energy from wastewater. Critical insights are provided on suitable materials for fabricating these cathodes, as well as addressing some challenges in the fabrication process with proposed strategies to overcome them. The second and complementary part of the progress report highlights how the unique features of this cathode architecture can solve one of the intrinsic bottlenecks (gas-liquid mass transfer limitation) in the application of microbial electrochemical systems for CO₂ reduction to value-added products. Strategies to further improve the availability of CO₂ to microbial catalysts on the cathode are proposed. The importance of understanding microbe-cathode interactions, as well as electron transfer mechanisms at the cathode-cell and cell-cell interface to better design dual-function macroporous hollow-fiber cathodes, is critically discussed with insights on how the choice of material is important in facilitating direct electron transfer versus mediated electron transfer.

Metallic State FeS Anchored (Fe)/Fe3O4/N-Doped Graphitic Carbon with Porous Spongelike Structure as Durable Catalysts for Enhancing Bioelectricity Generation

The critical issues in practical application of microbial fuel cells (MFCs) for wastewater treatment are the high cost and poor activity and durability of precious metal catalysts. To alleviate the activity loss and kinetic barriers for oxygen reduction reaction (ORR) on cathode, (Fe)/Fe₃O₄/FeS/N-doped graphitic carbon ((Fe)/Fe₃O₄/FeS/NGC) is prepared as ORR catalyst through a one-step method using waste pomelo skins as carbon source. Various characterization techniques and electrochemical analyses are conducted to illustrate the correlation between structural characteristics and catalytic activity. MFCs with Fe/Fe₃O₄/FeS/NGC (900 °C) cathode produces the maximum power density of 930 ± 10 mW m^-2 (Pt/C of 489 mW m^-2) and maintains a good long-term durability, which only declines 18% after 90 day operation. Coulombic efficiency (22.2%) obtained by Fe/Fe₃O₄/FeS/NGC (900 °C) cathode is significantly higher than that of Pt/C (17.3%). Metallic state FeS anchored in porous NGC skeleton can boost electron transport through the interconnected channels in spongelike structure to improve catalytic activity. Charge delocalization of C atoms can be strengthened by N atoms incorporation into carbon skeleton, which correspondingly contributes to the O₂ chemisorptions and O-O bond weakening during ORR. Energetically existed active components (Fe and N species) are more efficient than Pt to trap and consume electrons in catalyzing ORR in wastewater containing Pt-poisoning substances (bacterial metabolites). (Fe)/Fe₃O₄/FeS/NGC catalysts with the advantages of durable power outputs and environmental-friendly raw material can cover the shortages of Pt/C and provide an outlook for further applications of these catalysts.

Surface functionalization of carbon nanotubes: fabrication and applications

This review highlights recent development in functionalization of CNTs and their applications.