Facile synthesis of bicontinuous microporous/mesoporous carbon foam with ultrahigh specific surface area for supercapacitor application

Fe2O3 Embedded in N-Doped Porous Carbon Derived from Hemin Loaded on Active Carbon for Supercapacitors

The high power density and long cyclic stability of N-doped carbon make it an attractive material for supercapacitor electrodes. Nevertheless, its low energy density limits its practical application. To solve the above issues, Fe2O3 embedded in N-doped porous carbon (Fe2O3/N-PC) was designed by pyrolyzing Hemin/activated carbon (Hemin/AC) composites. A porous structure allows rapid diffusion of electrons and ions during charge-discharge due to its large surface area and conductive channels. The redox reactions of Fe2O3 particles and N heteroatoms contribute to pseudocapacitance, which greatly enhances the supercapacitive performance. Fe2O3/N-PC showed a superior capacitance of 290.3 F g-1 at 1 A g-1 with 93.1% capacity retention after 10,000 charge-discharge cycles. Eventually, a high energy density of 37.6 Wh kg-1 at a power density of 1.6 kW kg-1 could be delivered with a solid symmetric device.

Recent Progress of Hollow Carbon Nanocages: General Design Fundamentals and Diversified Electrochemical Applications

Hollow carbon nanocages (HCNCs) consisting of sp2  carbon shells featured by a hollow interior cavity with defective microchannels (or customized mesopores) across the carbon shells, high specific surface area, and tunable electronic structure, are quilt different from the other nanocarbons such as carbon nanotubes and graphene. These structural and morphological characteristics make HCNCs a new platform for advanced electrochemical energy storage and conversion. This review focuses on the controllable preparation, structural regulation, and modification of HCNCs, as well as their electrochemical functions and applications as energy storage materials and electrocatalytic conversion materials. The metal single atoms-functionalized structures and electrochemical properties of HCNCs are summarized systematically and deeply. The research challenges and trends are also envisaged for deepening and extending the study and application of this hollow carbon material. The development of multifunctional carbon-based composite nanocages provides a new idea and method for improving the energy density, power density, and volume performance of electrochemical energy storage and conversion devices.

Rationally tuning ratio of micro- to meso-pores of biomass-derived ultrathin carbon sheets toward supercapacitors with high energy and high power density

The carbon pore structure could have a significant effect on supercapacitor performance; however, this effect has not yet been systematically studied. A facile approach for synthesizing porous, ultrathin carbon sheets while rationally tuning the ratio of micro-to meso-pores via partial corrosion has been developed for the fabrication of high-performance devices. The prepared carbon from biomass with an optimal ratio of micro- to meso-pores has a large specific surface area of 1785 m² g ^-1, a high specific capacitance of 447F g ^-1 at 0.5 A g^-1, a high energy density of 15.5-9.7 Wh kg^-1, and an excellent power density of 0.062-6.24 kW kg^-1. After 10,000 charge-discharge cycles, the capacitance retention was maintained at 95%, which exceeded most of the biomass-carbon-based capacitors. Volcano relationships were found to exist through plots of both specific surface area and specific capacitance versus the micro-to meso-pore ratio. An enhancement mechanism with a rational pore structure is proposed, which not only networks micropores to remove died-end micropores to achieve the largest specific active surface area and high specific capacitance but also realizes fast mass-transport channels, resulting in high power density. This work provides an effective approach based on waste re-use by tuning a rational pore structure for achieving high energy/power density toward green energy applications with universal significance.

One step synthesis of N, P co-doped hierarchical porous carbon nanosheets derived from pomelo peel for high performance supercapacitors

Ammonium dihydrogen phosphate (NH₄H₂PO₄) was used as an activator and co-dopant to induce the synthesis of N, P co-doped porous carbon nanosheets (NPCNs) from pomelo peel for using as high-performance supercapacitors. Pomelo peel has a unique sponge-like structure in which NH₄H₂PO₄ particles can be evenly embedded. The pore structure and heteroatomic doping amount of NPCNs were controlled by adjusting the pyrolysis temperature. As a result, the optimal sample exhibits high specific capacitance (314 ± 2.6 F g^-1) and rate capability (82% of capacitance retention at 20 A g^-1). NPCNs-750 was further employed in a symmetrical supercapacitor (NPCNs-750//NPCNs-750 SSC) with 2 M Li₂SO₄ electrolyte, and exhibits a high energy density of 36 ± 1.5 W h kg^-1 at a power density of 1000 W kg^-1, with excellent cycling stability with 99% retention after 10,000 cycles. A series of excellent results show that this pollution-free and cost-effective method can be used for the design and preparation of high-performance supercapacitor electrode materials.

One-pot synthesis of N,S-doped pearl chain tube-loaded Ni3S2 composite materials for high-performance lithium-air batteries

To improve the high reversibility of lithium-air batteries, an air electrode needs to have excellent electrochemical performance and spatial structure. Ni3S2 nanoparticles are loaded onto an N,S-doped pearl chain tube (N,S-PCT) by a method called quasi-chemical vapor deposition (Q-CVD). Additionally, N and S are doped during the synthesis process, thereby forming an ideal pipe rack-like structure. The large amount of space in the tube rack can provide sufficient storage to act as a buffer for the discharge products, and the interconnected tubes can effectively promote the dispersion of O2 and electrolyte. The addition of Ni3S2 nanoparticles effectively reduces the charge transfer resistance, thereby increasing the electron mobility of the cathode. Ni3S2@N,S-PCT cathodes effectively improve the cycling and high-rate performance of lithium-air batteries, demonstrating an ultrahigh discharge capacity of 16 733.7 mA h g-1 at a current density of 400 mA g-1 and an ultrahigh discharge capacity of 5088.1 mA h g-1 at a current density of 1000 mA g-1. When the cut-off capacity is 1000 mA h g-1, the battery with the Ni3S2@N,S-PCT-800 electrode can achieve cycling stability for 148 cycles. This research provides a new solution for the design of lithium-air batteries with high electrocatalytic performance.

Coconut-based activated carbon fibers for efficient adsorption of various organic dyes

In this study, using coconut fibers as raw material, activated carbon fibers were prepared via carbonization and KOH activation processes. The morphology, composition, specific surface area, pore structure and thermal stability of the resulting activated carbon fibers were systematically characterized. It was found that the activation process increases the specific surface area of carbon fibers to a greater extent via formation of a large number of micropores (0.7–1.8 nm) and a certain amount of slit-shaped mesopores (2–9 nm). The specific surface area and the pore volume of the activated carbon fibers reach 1556 m² g⁻¹ and 0.72 cm³ g⁻¹, respectively. The activation process can also decompose the tar deposits formed after the carbonization process by pyrolysis, making the surface of the activated carbon fibers smoother. To study the adsorption properties of the as-prepared activated carbon fibers, the adsorption capacities and adsorption kinetics of various organic dyes including methylene blue, Congo red and neutral red were investigated. The adsorption capacities of the dyes increased with the increasing initial dye concentrations, and varied greatly with the pH value of the system. In methylene blue and neutral red systems, the adsorption capacities reach the maximum at pH 9, and in the Congo red system, it reaches the maximum at pH 3. The adsorption capacities of the activated carbon fibers in methylene blue, Congo red and neutral red systems reached equilibrium at 150, 120, and 120 min, and the maximum adsorption capacities were 21.3, 22.1, and 20.7 mg g⁻¹, respectively. The kinetics of the adsorption process was investigated using three models including pseudo-first-order, pseudo-second-order and intraparticle diffusion models. The results indicated that the dynamic adsorption processes of coconut-based activated carbon fibers to methylene blue, Congo red and neutral red were all in accordance with the second-order kinetic model, and the equations are as follows: t/Q_t = 0.1028 + t/21.3220, t/Q_t = 0.1128 + t/21.5982 and t/Q_t = 0.0210 + t/20.6612.

Activated carbon fibers with high micropore volume and large specific surface area were prepared from abundant and low-cost coconut fibers, which show excellent adsorption performances towards various dyes.

Nitrogen-Doped Mesoporous Carbons for Supercapacitor Electrodes with High Specific Volumetric Capacitance

To pursue the miniaturization of supercapacitors in practical use, it is critical to construct an efficient but limited porosity of a nanocarbon-based electrode for simultaneously obtaining a high utilization of energy storage places and high coating density. However, current studies dominantly focus on the enhancement of specific mass capacitance (C_m) by increasing the pore volume and surface area, leading to a low coating density and, thereby, resulting in a low specific volumetric capacitance (C_V). We report herein the fabrication of a nitrogen-doped mesoporous carbon (NNCM), whose tunable pore volume coupled with the fixed mesopore size offers us the possibility to control the coating density, thus optimizing the C_V and C_m for different application purposes. As a result, NNCM with the highest pore volume and surface area of 2.11 cm³ g^-1 and 663 m² g^-1 demonstrates the highest C_m (190 F g^-1) but lowest C_V (124 F cm^-3) because the overhigh porosity reduces the coating density greatly. NNCM with moderate pore volume and surface area of 1.22 cm³ g^-1 and 489 m² g^-1 shows the highest C_V of 200 F cm^-3, although it presents a low C_m of 147 F g^-1. These results may raise concerns about constructing a suitable porosity to realize a target-oriented use, particularly those targeting miniaturized devices.

Charge storage mechanisms of electrospun Mn3O4 nanofibres for high-performance supercapacitors

Mixed oxidation states of manganese oxides are widely used as the electrodes in supercapacitors due to their high theoretical pseudocapacitances.