Highly dispersed AuPd alloy nanoparticles immobilized on UiO-66-NH 2 metal-organic framework for the detection of nitrite

Selective and simultaneous electrochemical detection of nitrite and nitrate ions using Ag-MOF: Food and water analyses

We report the synthesis of metal organic framework (MOF) based on Ag and phenylenediamine (C6H4(NH2)2) and its application for detection of both nitrites and nitrates. Ag-MOF modified glassy carbon electrode (GCE) revealed a significantly higher electrocatalytic activity towards selective oxidation of NO2- and reduction of NO3- over wider concentration ranges of 4-4040 μmol/L and 20-4750 μmol/L respectively and the corresponding lowest detection limits have been deduced as 0.045 μmol/L and 12 μmol/L. Interestingly, cyclic voltammetric measurements at Ag-MOF/GCE in phosphate buffer saline (pH 5.0) exhibited both anodic (NO2-) and cathodic (NO3-) peaks indicating the possibility for simultaneous detection of the two nitrogen compounds. Further, the fabricated electrode has been successfully used to determine NO2- and NO3- concentrations in beetroot, spinach, canned chicken and pond water with excellent relative standard deviation (RSD) values and recovery percentages. The results suggest the potential application of the fabricated sensor for food and environmental analyses.

A novel photoelectrochemical strategy for ultrasensitive and simultaneous detection of 5-methylcytosine and N6-methyladenosine based on proximity binding-triggered assembly MNAzyme -mediated HRCA

The preparation of UiO-66@CdTe@AuNPs composites is presented for the first time, which function as a photoelectrochemical (PEC) sensing matrix and are conjugated to a three-way junction (TWJ). We propose an antibody-based specific recognition-induced neighbor-joining reaction that initiates the assembly of two molecularly designed nucleic acid enzymes (MNAzymes), to release an oligonucleotide that hydrolyzes TWJ through the mechanism of a toehold-mediated strand displacement reaction (TSDR). Subsequently, a hybridization chain reaction application (HRCA)-based dendrimer is formed, which immobilizes a large number of quantum dots to generate a burst effect that reduces the photocurrent signal. As anticipated, the developed PEC biosensor showed excellent analytical performance for both m6A-RNA and m5C-RNA, with detection limits of 0.309 fM and 6.918 aM, respectively. The successful fabrication of this ultrasensitive and simultaneous PEC biosensor provides new insights for epigenetic research and the bioassay, mechanism investigation and clinical diagnosis of diseases associated with RNA methylation.

Development of a nanocomposite hydrogel catalyzed H2O2/TMB system for determination of chlordiazepoxide in exhaled breath condensate

In this study, an enzyme mimic catalyzed H2O2-tetramethylbenzidine system based on UiO-66/Au NPs-PVA nanocomposite hydrogel was employed as an optical probe for chlordiazepoxide sensing. An excellent detection limit of 0.0032 μg mL-1 with a linear range of 0.005-2.0 μg mL-1 was obtained for chlordiazepoxide in exhaled breath condensate samples under optimal conditions. The validated system showed good repeatability, simplicity, and stability toward chlordiazepoxide sensing in the exhaled breath condensate of patients receiving this drug.

Zirconium-based metal-organic frameworks and their roles in electrocatalysis

Due to their exceptional chemical stability in water and high structural tunability, zirconium(IV)-based MOFs (Zr-MOFs) have been considered attractive materials in the broad fields of electrocatalysis. Numerous studies published since 2015 have attempted to utilise Zr-MOFs in electrocatalysis, with the porous framework serving as either the active electrocatalyst or the scaffold or surface coating to further enhance the performance of the actual electrocatalyst. Herein, the roles of Zr-MOFs in electrocatalytic processes are discussed, and some selected examples reporting the applications of Zr-MOFs in various electrocatalytic reactions, including several studies from our group, are overviewed. Challenges, limitations and opportunities in using Zr-MOFs in electrocatalysis in future studies are discussed.

Portable smartphone-assisted highly sensitive detection of mercury ions based on gold nanoparticle-modified NH2-UiO-66 metal-organic framework

A novel portable smartphone-assisted colorimetric method was reported for the determination of Hg2+ with good analytical performance. A Zr(IV)-based metal-organic framework functionalized with amino groups (NH2-UiO-66) has been adopted as a supporting platform to anchor gold nanoparticles (AuNPs), avoiding the migration and aggregation of AuNPs. With the addition of Hg2+, the formation of gold amalgam proved possible to enhance peroxidase-like activity of the composite (AuNPs/NH2-UiO-66), accelerating the oxidization of zymolyte 3,3',5,5'-tetramethylbenzidine (TMB). In the meantime, the color of the reaction solution turned a vivid blue, and the red, green, and blue (RGB) values of the solution color changed accordingly. On account of this strategy, the quantitative detection of Hg2+ could be achieved. After the optimization of the experiment conditions, the average color intensity (Ic) resulting from RGB values was linear related to the concentration of Hg2+ from 10 to 100 nM, accompanied with a detection limit (LOD) down to 5.4 nM calculated by 3σ/S. The successful application of the designed method has been promoted to detect Hg2+ in some water samples, displaying a great potential in practical application. Furthermore, the use of a smartphone made our proposed method simple and accurate, and thus puts forward a possible way for in situ and real-time monitoring.

Recent advances in metal-organic framework (MOF)-based agricultural sensors for metal ions: a review

Metal ions have great significance for agricultural development, food safety, and human health. In turn, there exists an imperative need for the development of novel, sensitive, and reliable sensing techniques for various metal ions. Agricultural sensors for the diagnosis of both agricultural safety and nutritional health can establish quality and safety traceability systems of both agro-products and food to guarantee human health, even life safety. Metal-organic frameworks (MOFs) are utilized widely for the design of diversified sensors due to their distinctive structural characteristics and extraordinary optical and electrical properties. To serve agricultural sensors better, this review is dedicated to providing a brief overview of the synthesis of MOFs, the modification of MOFs, the fabrication of MOF-based film electrodes, the applications of MOF-based agricultural sensors for metal ions, which are centered on electrochemical sensors and optical sensors, and current challenges of MOF-based agricultural sensors. In addition, this review also provides potential future opportunities for the development and practical application of agricultural sensors.

Progress and opportunities for metal-organic framework composites in electrochemical sensors

Metal-organic framework composites have the advantages of large surface area, high porosity, strong catalytic efficiency and good stability, which provide a great possibility of finding excellent electrode materials for electrochemical sensors. However, MOF composites still face various challenges and difficulties, which limit their development and application. This paper reviews the application of MOF composites in electrochemical sensors, including MOF/carbon composites, MOF/metal nanoparticle composites, MOF/metal oxide composites and MOF/enzyme composites. In addition, the application challenges of MOF composites in electrochemical sensors are summarized. Finally, the application prospect for MOF composites is considered to promote the synthesis of more MOF composites with excellent properties.

A follow-up study on "A sensitive determination of morphine in plasma using AuNPs@UiO-66/PVA hydrogel as an advanced optical scaffold"

A double solvent-assisted approach was developed for the preparation of AuNPs@UiO-66 based polyvinyl alcohol hydrogel nanocomposite and evaluated its potential as a nanoprobe for the determination of morphine. The characterization and morphology of the synthesized platform were studied and performance comparison for morphine determination was done between the synthesized scaffold and the reported one in our previous work and discussed in detail. Due to the encapsulation of AuNPs inside UiO-66 in a double solvent-assisted approach, no energy transfer was performed with UiO-66 and finally, morphine could not bind with AuNPs. Given these values, such a hydrogel-based matrix prepared with different methodologies with the same thermal stability demonstrates dissimilar potential toward morphine determination in biological samples.

Colorimetric and ratiometric fluorescent dual-mode sensitive detection of Hg2+ based on UiO-66-NH2@Au composite

A colorimetric and ratiometric fluorescent dual-mode assay is constructed for sensitive and specific Hg²⁺ sensing based on UiO-66-NH₂ and Au composite (UiO-66-NH₂@Au). The addition of Hg²⁺ stimulates the peroxidase-like activity of UiO-66-NH₂@Au by the formation of Au-Hg amalgam, promoting the oxidizing of chromogenic substrate OPD to DAP with the aid of H₂O₂, which lead to the change of colorimetric and fluorescent signals. The absorbance of the sensing system at 450 nm is linear positive correlation with Hg²⁺ concentration of 30-1400 nM and the color of the solution under visible light shaded from light yellow to dark yellow. With the increase of Hg²⁺ concentration, the fluorescence signal at 570 nm (DAP) increased whereas that at 455 nm (intrinsic fluorescence of UiO-66-NH₂) decreased due to inner filter effect (IFE), the fluorescence intensity ratio (F₄₅₅/F₅₇₀) decreasing linearly with Log [Hg²⁺] over the range 60-1700 nM; the fluorescence emission of sensing system under UV excitation changed from blue to yellow, which can easily be discerned visually. This assay was successfully applied to the determination of Hg²⁺ in tap water and river water. The results indicate that the colorimetric and ratiometric fluorescent dual-mode assay based on UiO-66-NH₂@Au realized visual determination of Hg²⁺ rapidly and reliably, revealed application prospect in Hg²⁺ monitoring.

Enzymeless voltammetric sensor for simultaneous determination of parathion and paraoxon based on Nd-based metal-organic framework

The aim of this work is to fabricate a sensitive and novel enzymeless electrochemical sensor for the simultaneous determination of parathion and paraoxon using the Nd-UiO-66@MWCNT nanocomposite. For this purpose, Neodymium (Nd) was introduced into a Universitetet i Oslo (UiO-66) structure to construct Nd-UiO-66 and then, adding multi-walled carbon nanotubes to the Nd-UiO-66 to increase the electrocatalytic activity and surface area of the obtained composite. The Nd-UiO-66@MWCNT has numerous advantages like excellent conductivity, tunable texture, and large surface area and can be used as a distinctive structure for the construction of modified glassy carbon electrode (GCE) to enhance the charge-transfer and the efficiency of electrochemical sensors. This modified electrode showed sensitive and selective determination of paraoxon and parathion over the linear ranges of 0.7-100 and 1-120 nM, with detection limits of 0.04 and 0.07 nM, respectively. The proposed Nd-UiO-66@MWCNT/GCE sensor in this study can be applied in environmental and toxicological laboratories and field tests to detect parathion and paraoxon levels.

Metal organic frameworks for electrochemical sensor applications: A review

Metal-organic frameworks (MOFs) are broadly known as porous coordination polymers, synthesized by metal-based nodes and organic linkers. MOFs are used in various fields like catalysis, energy storage, sensors, drug delivery etc., due to their versatile properties (tailorable pore size, high surface area, and exposed active sites). This review presents a detailed discussion of MOFs as an electrochemical sensor and their enhancement in the selectivity and sensitivity of the sensor. These sensors are used for the detection of heavy metal ions like Cd²⁺, Pb²⁺, Hg²⁺, and Cu²⁺ from groundwater. Various types of organic pollutants are also detected from the water bodies using MOFs. Furthermore, electrochemical sensing of antibiotics, phenolic compounds, and pesticides has been explored. In addition to this, there is also a detailed discussion of metal nano-particles and metal-oxide based composites which can sense various compounds like glucose, amino acids, uric acid etc. The review will be helpful for young researchers, and an inspiration to future research as challenges and future opportunities of MOF-based electrochemical sensors are also reported.

Group 4 Metal-Based Metal—Organic Frameworks for Chemical Sensors

Metal-organic frameworks (MOFs) have attracted great attention for their applications in chemical sensors mainly due to their high porosity resulting in high density of spatially accessible active sites, which can interact with the aimed analyte. Among various MOFs, frameworks constructed from group 4 metal-based (e.g., zirconium, titanium, hafnium, and cerium) MOFs, have become especially of interest for the sensors requiring the operations in aqueous media owing to their remarkable chemical stability in water. Research efforts have been made to utilize these group 4 metal-based MOFs in chemosensors such as luminescent sensors, colorimetric sensors, electrochemical sensors, and resistive sensors for a range of analytes since 2013. Though several studies in this subfield have been published especially over the past 3–5 years, some challenges and concerns are still there and sometimes they might be overlooked. In this review, we aim to highlight the recent progress in the use of group 4 metal-based MOFs in chemical sensors, and focus on the challenges, potential concerns, and opportunities in future studies regarding the developments of such chemically robust MOFs for sensing applications.

Sensitive electrochemical aptasensor for determination of sulfaquinoxaline based on AuPd NPs@UiO-66-NH2/CoSe2 and RecJf exonuclease-assisted signal amplification

The authors designed a sensitive label-free electrochemical aptasensor for the detection of sulfaquinoxaline (SQX), including the AuPd NPs@UiO-66-NH₂/CoSe₂ nanocomposites and RecJf exonuclease-assisted target recycle signal amplification strategy. AuPd NPs@UiO-66-NH₂/CoSe₂ nanocomposite with excellent conductivity and numerous active sites was successfully synthesized to provide a favorable sensing platform and load more double-strand DNA (dsDNA) on the electrode surface. The negatively charged phosphate group of the oligonucleotide and [Fe (CN)₆] ^3-/4- repel each other electrostatically, resulting in very low electrical signals. In the presence of SQX, its corresponding aptamer will be released from the double-stranded structure and then digested by RecJf exonuclease, which resulted in the SQX being released to initiate the next recycling to help amplify the DPV signal. Under the optimal conditions, the peak current has a linear relationship with the logarithmic of SQX concentration in the range of 1 pg/mL∼100 ng/mL and the obtained detection limit was 0.547 pg/mL. Furthermore, the contrasted aptasensor possess reliable specificity, reproducibility and stability toward SQX, and has been applied to detect SQX in pork samples with a satisfied recovery varied from 94.40% to 95.98%.

Fabrication of Raspberry-like Cytochrome C Surface-Imprinted Nanoparticles Based on MOF Composites for High-Performance Protein Separation

The development of high-performance protein-imprinted materials is vital to meet the requirements of proteomics research but remains a challenge. Herein, a new type of raspberry-like cytochrome C-imprinted nanoparticle was first designed and fabricated via surface imprinting technology combined with a template immobilization strategy. In particular, the state-of-the-art metal-organic framework (MOF)/carbon nanoparticle (CN) composites were selected as protein immobilization carriers for two advantages: (1) the composites reflected the intrinsic characteristics of MOFs including flexible design, facile preparation, and extensive interactions with proteins and (2) the utilization of composites also overcame the issue associated with the severe agglomeration of individual MOFs during the post-use process. Therefore, the as-prepared composites exhibited a regular raspberry-like shape with good dispersion (polydispersity index (PDI) < 0.25), high specific surface area (551.4 m² g^-1), and outstanding cytochrome C immobilization capacity (900 mg g^-1). Furthermore, a zwitterionic monomer was chosen to participate in the synthesis of an imprinting layer to reduce the nonspecific binding with proteins. As a result, the unique design presented here in both the protein immobilization carrier and the selected polymer composition endowed the imprinted material (noted as CN@UIO-66@MIPs) with the excellent ability for cytochrome C enrichment with extremely high recognition ability (imprinting factor (IF) = 6.1), rapid adsorption equilibrium time (40 min), and large adsorption capacity (815 mg g^-1). Furthermore, encouraged by the experimental results, we successfully used CN@UIO-66@MIPs to specifically capture cytochrome C in mixed protein solutions and biological samples, which proved them to be a potential candidate for protein separation and purification.

Ionic liquid functionalized 3D graphene-carbon nanotubes‒AuPd nanoparticles‒molecularly imprinted copolymer based paracetamol electrochemical sensor: Preparation, characterization and application

An innovative electrochemical sensor for paracetamol (PCM) determination was fabricated by electropolymerization imprinting on three-dimension (3D) AuPd nanoparticles‒ionic liquid (IL) functionalized graphene‒carbon nanotubes nanocomposite (AuPd/GN-CNTs-IL) modified glassy carbon electrode. The GN-CNTs supported AuPd alloy nanoparticles were prepared via one-pot hydrothermal method in the presence of IL (i.e. 1-hydroxyethyl-3-methyl imidazolium bis[(trifluoromethyl) sulfonyl] imide), which not only promoted the formation of small AuPd alloy nanoparticles, but also acted as "spacer" to prevent the π-π stacking and aggregation of graphene sheets and carbon nanotubes. The resulting composite had large surface area and high electrocatalysis. The PCM imprinted poly(carbazole-co-pyrrole) exhibited good recognition to PCM and had high stability. Based on the synergic effect of PCM imprinted copolymer and 3D AuPd/GN-CNTs-IL nanocomposite, a highly selective and sensitive electrochemical sensor was established. It presented a good linear relationship from 0.10 to 10 μM with a low limit of detection of 50 nM (S/N = 3). The sensor could be applied to the detection of PCM in biological samples, with acceptable recoveries (84.5%-102%). In addition, it was successfully used to monitor the concentration of PCM in urine from a patient with fever cold.

Plasmonic nanoparticles on metal-organic framework: A versatile SERS platform for adsorptive detection of new coccine and orange II dyes in food

Synthetic dyes have been widely applied to food processing, but abuse of colourants in food may pose risks to human health. To analyze new coccine (NC) and orange II (OII) in food, a versatile surface-enhanced Raman scattering (SERS) platform was proposed. A metal-organic framework (MOF, UiO-66(NH₂)) with octahedral crystal structure was synthesized and gold nanoparticles were grown on the MOF surface to fabricate UiO-66(NH₂)@Au versatile SERS platform. The UiO-66(NH₂)@Au displayed much better SERS performance than gold nanoparticles with high R² of 0.9684 for NC and 0.9912 for OII and low LOD of 0.4015 mg/L for NC and 0.0546 mg/L for OII. The recoveries of NC and OII in Mirinda soft drink and paprika ranged from 82.92 to 109.63%. This study provided a sensitive and rapid method for determination of NC and OII through UiO-66(NH₂)@Au, and the proposed SERS platform revealed great potential for analyzing synthetic colourants in food samples.

A type-II interband alignment heterojunction architecture of cobalt titanate integrated UiO-66-NH2: A visible light mediated photocatalytic approach directed towards Norfloxacin degradation and green energy (Hydrogen) evolution

Environmental pollution and energy scarcity is a major issue of the current scenario which forbear the progress of developing world. To overcome these problems towards a sustainable future, the utilization of sunlight by means of photocatalysis can be regarded as a best and suitable pathway. To validate this purpose, design and development of efficient heterogeneous photocatalyst for harvesting solar energy should be the major research concern for scientific community. In this regard herein, we have prepared a series of stable and efficient CoTiO₃/UiO-66-NH₂ p-n junction mediated heterogeneous photocatalyst by hydrothermal method. The functionalised linker of UiO-66-NH₂ provided an intimate interfacial contact with CoTiO₃ by Co/TiON ionic interaction, as proved by HRTEM and XPS analysis. Moreover the inverted V-shaped Mott-Schottky plot confirmed the junction formation in the optimised CoTiO₃/UiO-66-NH₂ material. In addition, EIS and PL analysis also provides sufficient evidence about the hindrance of active species recombination in composite as a result of p-n hetero junction. LC-MS characterization technique traces the assorted intermediate species produced in the course of photodegradation of Norfloxacin and confirms its complete degradation to corresponding CO₂, H₂O and NH₄⁺ by the optimised CoTiO₃/UiO-66-NH₂. The highest photo-catalytic activity obtained towards Norfloxacin degradation is 90.13% and H₂ production is 530.87 µmol in 1 h. The enhanced photo-catalytic reaction follows Type-II p-n hetero junction charge transfer mechanism and thus, paves a new way to design MOF based heterojunction photocatalyst for diverse photo catalytic performance.

Surface Engineering of Carbon Fiber Paper toward Exceptionally High-Performance and Stable Electrochemical Nitrite Sensing

In this work, we introduce our recent finding that the carbon fiber paper (CFP) treated by simple air annealing (OCFP) could be used for exceptionally high-performance electrochemical nitrite sensing. The air-annealing process endows the pristine CFP with higher defective edge/plane sites, more oxygen-containing functional groups, higher roughness, and improved wettability. The electrochemical studies show that the OCFP exhibits excellent sensing performance for nitrite, with an ultralow determination limit of 0.1 μM and a detection limit of 0.07 μM, an ultrawide linear determination range of 0.1-3838.5 μM, a fast current response of 1 s, and a high sensitivity of 930.4 μA mM^-1 cm^-2. These performance values are comparable or even superior to those for most reported noble- or transition-metal-based advanced nitrite sensors. Besides, this electrode also presents satisfactory stability, reproducibility, and feasibility of nitrite sensing in food samples. As an ideal monolithic and metal-free catalyst with ultrahigh and stable detection performance, the OCFP has a high potential to be integrated into next-generation electrochemical sensing devices.

Highly sensitive nitrite sensor based on AuNPs/RGO nanocomposites modified graphene electrochemical transistors

Detection of nitrite is important for environmental safety and human health, and the development of high-performance sensors for accurate detection of nitrite is highly desirable. Herein, a highly sensitive graphene electrochemical transistor (GECT) nitrite sensor was designed and fabricated for the first time. A single layer of graphene was placed between the source and drain electrodes by the wetting transfer method to act as channel for the transistor. Au nanoparticles modified reduced graphene oxide nanocomposites (AuNPs/RGO) were electrodeposited at the transistor gate to improve its catalytic oxidation performance of nitrite with optimized electrodeposition conditions. The sensing principle was attributed to changes in effective gate voltage applied to GECT induced by electrooxidation of nitrite at gate electrodes. Due to the high carrier mobility of graphene in the channel and the excellent electrocatalytical activity of AuNPs/RGO on the gate, the obtained sensor device exhibited an exceedingly low detection limit (0.1 nM nitrite) and ultra-wide linear range from 0.1 nM to 7 μM and from 7 to 1000 μM, which are comparable or superior to the performance of large-scale instruments (e.g. chromatography, spectrophotometry, and spectrofluorimetry etc.). The GECT device also showed good anti-interference performance toward common interfering ions and stable performances. Nitrite in natural lake water has been proven to be monitored by our devices. Therefore, the present novel GECT sensor could act as a desirable practical platform for highly sensitive detection of nitrite in the food and environmental fields.

High-performance electrochemical enzyme sensor for organophosphate pesticide detection using modified metal-organic framework sensing platforms

A practical electrochemical biosensor with high sensitivity was developed for detecting organophosphorus (OP). Initially, Ce metal was introduced into an UiO-66-template to form Ce/UiO-66. Later, graphene oxide (GO), carbon black (CB) and multi-walled carbon nanotubes (MWCNTs) were separately added to Ce/UiO-66 to compare the effect of different carbon-based material types on the performance of the biosensor. Exclusively, Ce/UiO-66/MWCNTs with a Ce (7%) and MWCNT (30%) matrix was found to not only load more acetylcholinesterase (AChE) onto vacant sites but also increase electron transfer and decrease the number of diffusion pathways between the thiocholine and electrode surface. Moreover, the appropriate oxophilicity of Ce coupled with the high surface area and good conductivity of MWCNTs in the UiO-66 structure revealed a high affinity to acetylthiocholine chloride (ATCl) and possible catalysis of the hydrolysis of ATCl with a Michaelis-Menten constant of 0.258 mM. This biosensor, under optimal conditions, demonstrated a rapid and sensitive detection of paraoxon over a wide linear range of 0.01-150 nM, with a low detection limit of 0.004 nM. As a result, the AChE/Ce/UiO-66/MWCNTs/GCE biosensor can be employed in laboratory and field experiments to determine paraoxon levels.

Metal–Organic Frameworks Toward Electrocatalytic Applications

Metal–organic frameworks (MOFs) are a class of porous materials constructed from metal-rich inorganic nodes and organic linkers. Because of their regular porosity in microporous or mesoporous scale and periodic intra-framework functionality, three-dimensional array of high-density and well-separated active sites can be built in various MOFs; such characteristics render MOFs attractive porous supports for a range of catalytic applications. Furthermore, the electrochemically addressable thin films of such MOF materials are reasonably considered as attractive candidates for electrocatalysis and relevant applications. Although it still constitutes an emerging subfield, the use of MOFs and relevant materials for electrocatalytic applications has attracted much attention in recent years. In this review, we aim to focus on the limitations and commonly seen issues for utilizing MOFs in electrocatalysis and the strategies to overcome these challenges. The research efforts on utilizing MOFs in a range of electrocatalytic applications are also highlighted.

Lab on a Chip for the Colorimetric Determination of Nitrite in Processed Meat Products in the Jordanian Market

Nitrite and Nitrate have been used extensively as additives in various meat products to enhance flavor, color, and to preserve the meat from the bacterial growth. High concentrations of nitrite can threat human health since several studies in the literature claim that nitrite is associated with cancer incidences, leukemia, and brain tumors. Therefore, it is vital to measure the nitrite concentrations in processed meat products. In this study, an in-lab miniaturized photometric detection system is fabricated to inspect the nitrite concentration in processed meat products in Jordan. The analytical performance of nitrite detection is evaluated based on three key statistical parameters; linearity, limit of detection, and limit of quantitation. Respectively, for the fabricated system, the three values are found to be equal to 0.995, 1.24 × 10-2 ppm, and 4.12 × 10-2 ppm. Adherence to Beer's law is found over the investigated range from 2.63 ppm to 96.0 ppm. The developed system is utilized for photometric detection of nitrite in processed meat products available in the Jordanian market like pastrami, salami, and corned beef. In all of the analyzed samples, the nitrite content is found to be lower than 150 ppm, which represents the maximum allowable nitrite limit.

Tuning Pt and Cu sites population inside functionalized UiO-67 MOF by controlling activation conditions

The exceptional thermal and chemical stability of the UiO-66, -67 and -68 classes of isostructural MOFs [J. Am. Chem. Soc., 2008, 130, 13850] makes them ideal materials for functionalization purposes aimed at introducing active centres for potential application in heterogeneous catalysis. We previously demonstrated that a small fraction (up to 10%) of the linkers in the UiO-67 MOF can be replaced by bipyridine-dicarboxylate (bpydc) moieties exhibiting metal-chelating ability and enabling the grafting of Pt(ii) and Pt(iv) ions in the MOF framework [Chem. Mater., 2015, 27, 1042] upon interaction with PtCl₂ or PtCl₄ precursors. Herein we extend this functionalization approach in two directions. First, we show that by controlling the activation of the UiO-67-Pt we can move from a material hosting isolated Pt(ii) sites anchored to the MOF framework with Pt(ii) exhibiting two coordination vacancies (potentially interesting for C-H bond activation) to the formation of very small Pt nanoparticles hosted inside the MOF cavities (potentially interesting for hydrogenation reactions). The second direction consists of the extension of the approach to the insertion of Cu(ii), obtained via interaction with CuCl₂, and exhibiting interesting redox properties. All materials have been characterized by in situ X-ray absorption spectroscopy at the Pt L₃- and Cu K-edges.

The fabrication of Au/Pd plasmonic alloys on UiO-66-NH2: an efficient visible light-induced photocatalyst towards the Suzuki Miyaura coupling reaction under ambient conditions

The current study on Au/Pd@UiO-66-NH₂ explores a novel approach towards photocatalytic SMC coupling reaction. This investigation highlights a well studied mechanistic pathway towards the formation of biphenyl as the target product.

Metal-Organic Framework-Based Sensors for Environmental Contaminant Sensing

Increasing demand for timely and accurate environmental pollution monitoring and control requires new sensing techniques with outstanding performance, i.e., high sensitivity, high selectivity, and reliability. Metal-organic frameworks (MOFs), also known as porous coordination polymers, are a fascinating class of highly ordered crystalline coordination polymers formed by the coordination of metal ions/clusters and organic bridging linkers/ligands. Owing to their unique structures and properties, i.e., high surface area, tailorable pore size, high density of active sites, and high catalytic activity, various MOF-based sensing platforms have been reported for environmental contaminant detection including anions, heavy metal ions, organic compounds, and gases. In this review, recent progress in MOF-based environmental sensors is introduced with a focus on optical, electrochemical, and field-effect transistor sensors. The sensors have shown unique and promising performance in water and gas contaminant sensing. Moreover, by incorporation with other functional materials, MOF-based composites can greatly improve the sensor performance. The current limitations and future directions of MOF-based sensors are also discussed.