Preparation of novel gallic acid-based dummy-template molecularly imprinted polymer adsorbents for rapid adsorption of dibutyl phthalate from water

Phthalate esters (PAEs) are plasticizers widely used in the industry and easily released into the environment, posing a serious threat to human health. Molecularly imprinted polymers (MIPs) are important as selective adsorbents for the removal of PAEs. In this study, three kinds of mussel-inspired MIPs for the removal of PAEs were first prepared with gallic acid (GA), hexanediamine (HD), tannic acid (TA), and dopamine (DA) under mild conditions. The adsorption results showed that the MIP with low cost derived from GA and HD (GAHD-MIP) obtained the highest adsorption capacity among these materials. Furthermore, 97.43% of equilibrium capacity could be reached within the first 5 min of adsorption. Especially, the dummy template of diallyl phthalate (DAP) with low toxicity was observed to be more suitable to prepare MIPs than dibutyl phthalate (DBP), although DBP was the target of adsorption. The adsorption process was in accordance with the pseudo-second-order kinetics model. In the isotherm analysis, the adsorption behavior agreed with the Freundlich model. Additionally, the material maintained high adsorption performance after 7 cycles of regeneration tests. The GAHD-MIP adsorbents in this study, with low cost, rapid adsorption equilibrium, green raw materials, and low toxicity dummy template, provide a valuable reference for the design and development of new MIPs.

Phthalate esters pollution in the leachate, soil, and water around a landfill near the sea, Iran

This investigation aimed to scrutinize the level of phthalate esters (PEs) in the landfill leachate of a coastal city in the north of the Persian Gulf and the sensitive ecosystem (soil and water) around it. Soil (two depths) and water samples were prepared from 5 stations in wet and dry seasons. The studied landfill leachate contained 114-303 μg/L of phthalates. The highest concentration of phthalates was related to bis (2-ethylhexyl) phthalate (3257 ng/g) in the wet season at surface soil (0-5 cm) in the landfill site, while the lowest one (6 ng/g) belonged to dimethyl phthalate at sub-surface soil at 700 m from the landfill in the dry season. A significant change in the level of Σ6PEs in the dry (303 μg/L) and wet (114 μg/L) seasons (P ≤ 0.05) was observed for water samples. The PE concentrations in wet times were higher in all soil depths than in dry times. With increasing depth, the content of phthalates decreased in all studied environments. A direct relationship was observed between the phthalates concentration and the pH value of leachate/water and soil. The PEs concentration was linked to electrical conductivity (leachate: R2 = 0.65, P < 0.01 and surface soil: R2 = 0.77, P < 0.05) and the soil organic content. The ecological risk of di-n-butyl phthalate, benzyl butyl phthalate, bis (2-ethylhexyl) phthalate, and di-n-octyl phthalate in the wet season was greater than one. The results showed that significant levels of phthalate esters are released from landfills to the surrounding environment, which requires adequate measures to maintain the health of the ecosystem and nearby residents.

Potent, selective and reversible hMAO-B inhibition by benzalphthalides: Synthesis, enzymatic and cellular evaluations and virtual docking and predictive studies

Monoaminooxidases (MAOs) are important targets for drugs used in the treatment of neurological and psychiatric disorders and particularly on Parkinson's Disease (PD). Compounds containing a trans-stilbenoid skeleton have demonstrated good selective and reversible MAO-B inhibition. Here, twenty-two (Z)-3-benzylidenephthalides (benzalphthalides, BPHs) displaying a trans-stilbenoid skeleton have been synthesised and evaluated as inhibitors of the MAO-A and MAO-B isoforms. Some BPHs have selectively inhibited MAO-B, with IC50 values ranging from sub-nM to μM. The most potent compound with IC50 = 0.6 nM was the 3',4'-dichloro-BPH 16, which showed highly selective and reversible MAO-B inhibitory activity. Furthermore, the most selective BPHs displayed a significant protection against the apoptosis, and mitochondrial toxic effects induced by 6-hydroxydopamine (6OHDA) on SH-SY5Y cells, used as a cellular model of PD. The results of virtual binding studies on the most potent compounds docked in MAO-B and MAO-A were in agreement with the potencies and selectivity indexes found experimentally. Additionally, related to toxicity risks, drug-likeness and ADME properties, the predictions found for the most relevant BPHs in this research were within those ranges established for drug candidates.

Intra-Articular Injection of PLGA/Polydopamine Core-Shell Nanoparticle Attenuates Osteoarthritis Progression

Osteoarthritis (OA) is a common joint disease characterized by progressive cartilage degeneration. Unfortunately, currently available clinical drugs are mainly analgesics and cannot alleviate the development of OA. Kartogenin (KGN) has been found to promote the differentiation of bone marrow mesenchymal stem cells (BMSCs) into chondrocytes for the treatment of cartilage damage in early OA. However, KGN, as a small hydrophobic molecule, is rapidly cleared from the synovial fluid after intra-articular injection. This study synthesized a KGN-loaded nanocarrier based on PLGA/polydopamine core/shell structure to treat OA. The fluorescence signal of KGN@PLGA/PDA-PEG-E7 nanoparticles lasted for 4 weeks, ensuring long-term sustained release of KGN from a single intra-articular injection. In addition, the polyphenolic structure of PDA enables it to effectively scavenge reactive oxygen species, and the BMSC-targeting peptide E7 (EPLQLKM) endows KGN@PLGA/PDA-PEG-E7 NPs with an effective affinity for BMSCs. As a result, the KGN@PLGA/PDA-PEG-E7 nanoparticles could effectively induce cartilage in vitro and protect the cartilage and subchondral bone in a rat ACLT model. This therapeutic strategy could also be extended to the delivery of other drugs, targeting other tissues to treat joint diseases.

Exploring Molecular Energy Landscapes by Coupling the DFTB Potential with a Tree-Based Stochastic Algorithm: Investigation of the Conformational Diversity of Phthalates

Exploring the global energy landscape of relatively large molecules at the quantum level is a challenging problem. In this work, we report the coupling of a nonredundant conformational space exploration method, namely, the robotics-inspired iterative global exploration and local optimization (IGLOO) algorithm, with the quantum-chemical density functional tight binding (DFTB) potential. The application of this fast and efficient computational approach to three close-sized molecules of the phthalate family (DBP, BBP, and DEHP) showed that they present different conformational landscapes. These differences have been rationalized by making use of descriptors based on distances and dihedral angles. Coulomb interactions, steric hindrance, and dispersive interactions have been found to drive the geometric properties. A strong correlation has been evidenced between the two dihedral angles describing the side-chain orientation of the phthalate molecules. Our approach identifies low-energy minima without prior knowledge of the potential energy surface, paving the way for future investigations into transition paths and states.

Evaluation of phthalate migration potential in vacuum-packed

In recent years, the presence and migration of PAEs in packaging materials and consumer products has become a serious concern. Based on this concern, the aim of our study is to determine the possible migration potential and speed of PAEs in benthic fish stored in vacuum packaging, as well as to monitor the storage time and type as well as polyethylene (PE) polymer detection.As a result of the analysis performed by µ-Raman spectroscopy, 1 microplastic (MP) of 6 µm in size was determined on the 30th day of storage in whiting fish muscle and the polymer type was found to be Polyethylene (PE) (low density polyethylene: LDPE). Depending on the storage time of the packaging used in the vacuum packaging process, it has been determined that its chemical composition is affected by temperature and different types of polymers are formed. 10 types of PAEs were identified in the packaging material and stored flesh fish: DIBP, DBP, DPENP, DHEXP, BBP, DEHP, DCHP, DNOP, DINP and DDP. While the most dominant PAEs in the packaging material were determined as DEHP, the most dominant PAEs in fish meat were recorded as BBP and the lowest as DMP. The findings provide a motivating model for monitoring the presence and migration of PAEs in foods, while filling an important gap in maintaining a safe food chain.

New combined absorption/1H NMR method for qualitative and quantitative analysis of PET degradation products

Poly(ethylene terephthalate) (PET) is a very valuable and beneficial material for industrial purposes, with various different applications. Due to the high annual production volume of over 50 million tons worldwide and the indiscriminate disposal by consumers, the polymers accumulate in the environment, causing negative effects on various ecosystems. Biodegradation via suitable enzymes represents a promising approach to combat the plastic waste issue so validated methods are required to measure the efficiency and efficacy of these enzymes. PETase and MHETase from Ideonella sakaiensis are suitable enzymes needed in combination to completely degrade PET into its environmentally friendly monomers. In this project, we compare and combine a previously described bulk absorbance measurement method with a newly established 1H NMR analysis method of the PET degradation products mono(2-hydroxyethyl) terephthalic acid, bis(2-hydroxyethyl) terephthalic acid and terephthalic acid. Both were optimized regarding different solvents, pH values and drying processes. The accuracy of the measurements can be confirmed with sensitivity limits of 2.5-5 µM for the absorption method and 5-10 µM for the 1H NMR analysis. The combination of the described methods therefore allows a quantitative analysis by using bulk absorption coupled with a qualitative analysis through 1H NMR. The methods established in our work can potentially contribute to the development of suitable recycling strategies of PET using recombinant enzymes.

Remodeling the polymer-binding cavity to improve the efficacy of PBAT-degrading enzyme

Poly(butylene adipate-co-terephthalate) (PBAT) is among the most widely applied synthetic polyesters that are utilized in the packaging and agricultural industries, but the accumulation of PBAT wastes has posed a great burden to ecosystems. Using renewable enzymes to decompose PBAT is an eco-friendly solution to tackle this problem. Recently, we demonstrated that cutinase is the most effective PBAT-degrading enzyme and that an engineered cutinase termed TfCut-DM could completely decompose PBAT film to terephthalate (TPA). Here, we report crystal structures of a variant of leaf compost cutinase in complex with soluble fragments of PBAT, including BTa and TaBTa. In the TaBTa complex, one TPA moiety was located at a polymer-binding site distal to the catalytic center that has never been experimentally validated. Intriguingly, the composition of the distal TPA-binding site shows higher diversity relative to the one proximal to the catalytic center in various cutinases. We thus modified the distal TPA-binding site of TfCut-DM and obtained variants that exhibit higher activity. Notably, the time needed to completely degrade the PBAT film to TPA was shortened to within 24 h by TfCut-DM Q132Y (5813 mol per mol protein). Taken together, the structural information regarding the substrate-binding behavior of PBAT-degrading enzymes could be useful guidance for direct enzyme engineering.

Facile fabrication of carbon nanotube hollow microspheres as a fiber coating for ultrasensitive solid-phase microextraction of phthalic acid esters in tea beverages

The efficient extraction of phthalic acid esters (PAEs) is challenging due to their extremely low concentration, complicated matrices and hydrophilicity. Herein, hollow microspheres, as an ideal coating, possess significant potential for solid-phase microextraction (SPME) due to their fascinating properties. In this study, multiwalled carbon nanotube hollow microspheres (MWCNT-HMs) were utilized as a fiber coating for the SPME of PAEs from tea beverages. MWCNT-HMs were obtained by dissolving the polystyrene (PS) cores with organic solvents. Interestingly, MWCNT-HMs well maintain the morphology of the MWCNTs@PS precursors. The layer-by-layer (LBL) assembly of MWCNTs on PS microsphere templates was achieved through electrostatic interactions. Six PAEs, di-ethyl phthalate (DEP), di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-2-ethylhexyl phthalate (DEHP) and di-n-octyl phthalate (DOP), were selected as target analytes for assessing the efficiency of the coating for SPME. The stirring rate, sample solution pH and extraction time were optimized by using the Box-Behnken design. Under optimal working conditions, the proposed MWCNT-HMs/SPME was coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) to achieve high enrichment factors (118-2137), wide linearity (0.0004-10 μg L-1), low limits of detection (0.00011-0.0026 μg L-1) and acceptable recovery (80.2-108.5%) for the detection of PAEs. Therefore, the MWCNT-HM coated fibers are promising alternatives in the SPME method for the sensitive detection of PAEs at trace levels in tea beverages.

Biodegradation of poly(ethylene terephthalate) through PETase surface-display: From function to structure

Polyethylene terephthalate (PET) is one of the most used plastics which has caused some environmental pollution and social problems. Although many newly discovered or modified PET hydrolases have been reported at present, there is still a lack of comparison between their hydrolytic capacities, as well as the need for new biotechnology to apply them for the PET treatment. Here, we systematically studied the surface-display technology for PET hydrolysis using several PET hydrolases. It is found that anchoring protein types had little influence on the surface-display result under T7 promoter, while the PET hydrolase types were more important. By contrast, the newly reported FAST-PETase showed the strongest hydrolysis effect, achieving 71.3% PET hydrolysis in 24 h by pGSA-FAST-PETase. Via model calculation, FAST-PETase indeed exhibited higher temperature tolerance and catalytic capacity. Besides, smaller particle size and lower crystallinity favored the hydrolysis of PET pellets. Through protein structure comparison, we summarized the common characteristics of efficient PET-hydrolyzing enzymes and proposed three main crystal structures of PET enzymes via crystal structural analysis, with ISPETase being the representative and main structure. Surface co-display of FAST-PETase and MHETase can promote the hydrolysis of PET, and the C-terminal of the fusion protein is crucial for PET hydrolysis. The results of our research can be helpful for PET contamination removal as well as other areas involving the application of enzymes. SYNOPSIS: This research can promote the development of better PET hydrolase and its applications in PET pollution treatment via bacteria surface-display.

Pretreatment of marine sediment for the removal of di-(2-ethylhexyl) phthalate by sulfite in the presence of sorghum distillery residue-derived biochar and its effect on microbiota response

This study investigates the mechanism behind the oxidation di-(2-ethylhexyl) phthalate (DEHP) in marine sediment by coupling sulfite using biochar prepared from sorghum distillery residue (SDRBC). The rationale for this investigation stems from the need to seek effective methods for DEHP-laden marine sediment remediation. The aim is to assess the feasibility of sulfite-based advanced oxidation processes for treating hazardous materials such as DEHP containing sediment. To this end, the sediment in question was treated with 2.5 × 10-5 M of sulfite and 1.7 g L-1 of SDRBC700 at acidic pH. Additionally, the study demonstrated that the combination of SDRBC/sulfite with a bacterial system enhances DEHP removal. Thermostilla bacteria were enriched, highlighting their role in sediment treatment. This study concludes that sulfite-associated sulfate radicals-driven carbon advanced oxidation process (SR-CAOP) offers sustainable sediment pretreatment through the SDRBC/sulfite-mediated microbial consortium, in which the SO3•- and 1O2 were responsible for DEHP degradation. SDRBC/sulfite offers an effective and environmentally friendly method for removing DEHP. Further, these results can be targeted at addressing industry problems related to sediment treatment.

DDIT4 is essential for DINP-induced autophagy of ovarian granulosa cells

As one of the most important phthalates, di-isononyl phthalate (DINP) has been widely used as a common plasticizer in the food and personal care products sectors. In our previous study, we found that DINP can induce autophagy of ovarian granulosa cells; while the underlying mechanism is unclear. In the study, we showed that DINP exposure could induce autophagy of ovarian granulosa cells and KGN cells, accompanied with the increase in the mRNA and protein level of DDIT4. Furthermore, overexpression of DDIT4 were shown to induce autophagy of KGN cells; while knockdown of DDIT4 inhibited DINP-induced autophagy, implying that DDIT4 played an important role in DINP-induced autophagy of ovarian granulosa cells. There were three putative binding sites of transcription factor ATF4 in the promoter region of DDIT4 gene, suggesting that DDIT4 might be regulated by ATF4. Herein, we found that overexpression of ATF4 could upregulate the expression of DDIT4 in KGN cells, while knockdown of ATF4 inhibited its expression. Subsequently, ATF4 was identified to bind to the promoter region of DDIT4 gene and promote its transcription. The expression of ATF4 was also increased in the DINP-exposed granulosa cells, and ATF4 overexpression promoted autophagy of KGN cells; whereas knockdown of ATF4 alleviated DINP-induced upregulation of DDIT4 and autophagy of the cells. Taken together, DINP triggered autophagy of ovarian granulosa cells through activating ATF4/DDIT4 signals.

Enzyme selection, optimization, and production toward biodegradation of post-consumer poly(ethylene terephthalate) at scale

Poly(ethylene terephthalate) (PET) is one of the world's most widely used polyester plastics. Due to its chemical stability, PET is extremely difficult to hydrolyze in a natural environment. Recent discoveries in new polyester hydrolases and breakthroughs in enzyme engineering strategies have inspired enormous research on biorecycling of PET. This study summarizes our research efforts toward large-scale, efficient, and economical biodegradation of post-consumer waste PET, including PET hydrolase selection and optimization, high-yield enzyme production, and high-capacity enzymatic degradation of post-consumer waste PET. First, genes encoding PETase and MHETase from Ideonella sakaiensis and the ICCG variant of leaf-branch compost cutinase (LCCICCG ) were codon-optimized and expressed in Escherichia coli BL21(DE3) for high-yield production. To further lower the enzyme production cost, a pelB leader sequence was fused to LCCICCG so that the enzyme can be secreted into the medium to facilitate recovery. To help bind the enzyme on the hydrophobic surface of PET, a substrate-binding module in a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM) was fused to the C-terminus of LCCICCG . The resulting four different LCCICCG variants (LCC, PelB-LCC, LCC-PBM, and PelB-LCC-PBM), together with PETase and MHETase, were compared for PET degradation efficiency. A fed-batch fermentation process was developed to produce the target enzymes up to 1.2 g L-1 . Finally, the best enzyme, PelB-LCC, was selected and used for the efficient degradation of 200 g L-1 recycled PET in a well-controlled, stirred-tank reactor. The results will help develop an economical and scalable biorecycling process toward a circular PET economy.

A Critical Review of Analytical Methods for the Quantification of Phthalates Esters in Two Important European Food Products: Olive Oil and Wine

Phthalic acid esters (PAEs) are a class of chemicals widely used as plasticizers. These compounds, considered toxic, do not bond to the polymeric matrix of plastic and can, therefore, migrate into the surrounding environment, posing a risk to human health. The primary source of human exposure is food, which can become contaminated during cultivation, production, and packaging. Therefore, it is imperative to control and regulate this exposure. This review covers the analytical methods used for their determination in two economically significant products: olive oil and wine. Additionally, it provides a summary and analysis of information regarding the characteristics, toxicity, effects on human health, and current regulations pertaining to PAEs in food. Various approaches for the extraction, purification, and quantification of these analytes are highlighted. Solvent and sorbent-based extraction techniques are reviewed, as are the chromatographic separation and other methods currently applied in the analysis of PAEs in wines and olive oils. The analysis of these contaminants is challenging due to the complexities of the matrices and the widespread presence of PAEs in analytical laboratories, demanding the implementation of appropriate strategies.

Environmental health risks induced by interaction between phthalic acid esters (PAEs) and biological macromolecules: A review

As a kind of compounds abused in industry productions, phthalic acid esters (PAEs) cause serious problems in natural environment. PAEs pollution has penetrated into environmental media and human food chain. This review consolidates the updated information to assess the occurrence and distribution of PAEs in each transmission section. It is found that micrograms per kilogram of PAEs are exposed to humans through daily diets. After entering the human body, PAEs often undergo the metabolic process of hydrolysis to monoesters phthalates and conjugation process. Unfortunately, in the process of systemic circulation, PAEs will interact with biological macromolecules in vivo under the action of non-covalent binding, which is also the essence of biological toxicity. The interactions usually operate in the following pathways: (a) competitive binding; (b) functional interference; and (c) abnormal signal transduction. While the non-covalent binding forces mainly contain hydrophobic interaction, hydrogen bond, electrostatic interaction, and π interaction. As a typical endocrine disruptor, the health risks of PAEs often start with endocrine disorder, further leading to metabolic disruption, reproductive disorders, and nerve injury. Besides, genotoxicity and carcinogenicity are also attributed to the interaction between PAEs and genetic materials. This review also pointed out that the molecular mechanism study on biological toxicity of PAEs are deficient. Future toxicological research should pay more attention to the intermolecular interactions. This will be beneficial for evaluating and predicting the biological toxicity of pollutants at molecular scale.

Divergence in the distribution of di(2-ethylhexyl) phthalate (DEHP) in two soils

Understanding the distribution of di(2-ethylhexyl) phthalate (DEHP) is necessary for future risk evaluation of DEHP in agricultural soils. This study used 14C-labeled DEHP to examine its volatilization, mineralization, extractable residues, and non-extractable residues (NERs) incubated in Chinese typical red and black soil with/without Brassica chinensis L. Results showed that after incubated for 60 days, 46.3% and 95.4% of DEHP were mineralized or transformed into NERs in red and black soil, respectively. The distribution of DEHP in humic substances as NER descended in order: humin > fulvic acids > humic acids. DEHP in black soil was more bioavailable, with 6.8% of initial applied radioactivity left as extractable residues at the end of incubation when compared with red soil (54.5%). Planting restrained the mineralization of DEHP by 18.5% and promoted the extractable residues of DEHP by 1.5% for black soil, but no such restrain was observed in red soil. These findings provide valuable information for understanding the distribution of DEHP in different soils and develop the understanding for the risk assessments of PAEs in typical soils.

Magnetite azolla impedimetric nanobiosensor for phthalic acid esters quantification

Phthalic acid esters (PAEs) are a group of organic compounds that show vulnerability effects in different stages of human development. In this work, two sensitive and efficient impedimetric biosensors (IBs) were introduced and their interactions with four PAEs, namely dibutyl phthalate (DBP), dimethyl phthalate (DMP), di(2-ethylhexyl) phthalate (DEHP), and dicyclohexyl phthalate (DCHP), in aqueous solutions with these biosensors were separately investigated via electrochemical impedance spectroscopy (EIS). The surface of a copper electrode was modified by azolla fern dried powder (AZ) and magnetite-modified azolla nanocomposites (MAZ NCs) to form an azolla-based impedimetric biosensor (AZIB) and magnetite azolla nanocomposite-based impedimetric nanobiosensor (MAZIB), respectively. Determinations of PAEs with the designed biosensors were conducted based on their blocking effect on the biosensor surface to ferrous ions oxidation. After each impedimetric measurement, the electrode surface was covered again with the modifier. Nyquist plots were obtained and indicated that the charge-transfer resistance (R_CT) values of the bare electrode, AZIB, and MAZIB without injection of PAEs were 468.8, 438.7, and 285.1 kΩ, respectively. After the separate injection of DBP, DMP, DEHP, and DCHP (3 μg L^-1) on the surface of AZIB and MAZIB, R_CT values were obtained as 563.9, 588.5, 548.7, and 570.1 kΩ for AZIB and 878.2, 1219.2, 754.3, and 814.7 kΩ for MAZIB, respectively. It was observed that the PAE blockers with a smaller structure provided better point-by-point coverage of the surface, which led to a bigger shift in R_CT. The linear relationship between the EIS responses and each PAE concentration was investigated in the range of 0.1-1000 μg L^-1. The limit of detection (LOD) and limit of quantification (LOQ) values were obtained in the ranges of 0.003-0.005 μg L^-1 and 0.010-0.016 μg L^-1 for AZIB and 0.008-0.009 μg L^-1 and 0.027-0.031 μg L^-1 for MAZIB, respectively. The results showed that these biosensors can be used to determine PAEs in real aqueous samples with good relative recoveries ranging from 93.0-97.7% (RSD < 2.58%) for AZIB and 93.3-99.3% (RSD < 2.45%) for MAZIB. The results confirmed that these impedimetric biosensors offer high sensitivity and performance for the determination of trace PAEs in aqueous samples.

Concentration-Dependent Inhibition of Mesophilic PETases on Poly(ethylene terephthalate) Can Be Eliminated by Enzyme Engineering

Enzyme-based depolymerization is a viable approach for recycling of poly(ethylene terephthalate) (PET). PETase from Ideonella sakaiensis (IsPETase) is capable of PET hydrolysis under mild conditions but suffers from concentration-dependent inhibition. In this study, this inhibition is found to be dependent on incubation time, the solution conditions, and PET surface area. Furthermore, this inhibition is evident in other mesophilic PET-degrading enzymes to varying degrees, independent of the level of PET depolymerization activity. The inhibition has no clear structural basis, but moderately thermostable IsPETase variants exhibit reduced inhibition, and the property is completely absent in the highly thermostable HotPETase, previously engineered by directed evolution, which simulations suggest results from reduced flexibility around the active site. This work highlights a limitation in applying natural mesophilic hydrolases for PET hydrolysis and reveals an unexpected positive outcome of engineering these enzymes for enhanced thermostability.

Butyl benzyl phthalate as a key component of phthalate ester in relation to cognitive impairment in NHANES elderly individuals and experimental mice

Phthalates are a group of neurotoxicants with cognitive-disrupting potentials. Given the structural diversity of phthalates, the corresponding neurotoxicity is dramatically altered. To identify the potential contributions of different phthalates on the process of cognitive impairment, data of 836 elders from the NHANES 2011-2014 cycles were used. Survey-weighted logistic regression and principal component analysis-weighted quantile sum regression (PCA-WQSR) models were applied to estimate the independent and combined associations of 11 urinary phthalate metabolites with cognitive deficit (assessed by 4 tests: Immediate Recall (IR), Delayed Recall (DR), Animal Fluency (AF), and Digit Symbol Substitution Test (DSST)) and to identify the potential phthalate with high weight. Laboratory mice were further used to examine the effect of phthalates on cognitive function and to explore the potential mechanisms. In logistic regression models, MBzP was the only metabolite positively correlated with four tests, with ORs of 2.53 (quartile 3 (Q3)), 2.26 (Q3), 2.89 (Q4) and 2.45 (Q2), 2.82 (Q4) for IR, DR, AF, and DSST respectively. In PCA-WQSR co-exposure models, low-molecular-weight (LMW) phthalates were the only PC positively linked to DSST deficit (OR: 1.93), which was further validated in WQSR analysis (WQS OR7-phthalates: 1.56 and WQS OR8-phthalates: 1.55); consistent with the results of logistic regression, MBzP was the dominant phthalate. In mice, butyl benzyl phthalate (BBP), the parent phthalate of MBzP, dose-dependently reduced cognitive function and disrupted hippocampal neurons. Additionally, the hippocampal transcriptome analysis identified 431 differential expression genes, among which most were involved in inhibiting the neuroactive ligand-receptor interaction pathway and activating the cytokine-cytokine receptor interaction pathway. Our study indicates the critical role of BBP in the association of phthalates and cognitive deficits among elderly individuals, which might be speculated that BBP could disrupt hippocampal neurons, activate neuroinflammation, and inhibit neuroactive receptors. Our findings provide new insight into the cognitive-disrupting potential of BBP.

Leaching of phthalate acid esters from plastic mulch films and their degradation in response to UV irradiation and contrasting soil conditions

Phthalate acid esters (PAEs) are commonly used plastic additives, not chemically bound to the plastic that migrate into surrounding environments, posing a threat to environmental and human health. Dibutyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP) are two common PAEs found in agricultural soils, where degradation is attributed to microbial decomposition. Yet the impact of the plastic matrix on PAE degradation rates is poorly understood. Using ¹⁴C-labelled DBP and DEHP we show that migration from the plastic matrix into soil represents a key rate limiting step in their bioavailability and subsequent degradation. Incorporating PAEs into plastic film decreased their degradation in soil, DBP (DEHP) from 79% to 21% (9% to <1%), over four months when compared to direct application of PAEs. Mimicking surface soil conditions, we demonstrated that exposure to ultraviolet radiation accelerated PAE mineralisation twofold. Turnover of PAE was promoted by the addition of biosolids, while the presence of plants and other organic residues failed to promote degradation. We conclude that PAEs persist in soil for longer than previously thought due to physical trapping within the plastic matrix, suggesting PAEs released from plastics over very long time periods lead to increasing levels of contamination.

Leaching behavior and evaluation of zebrafish embryo toxicity of microplastics and phthalates in take-away plastic containers

Take-away containers are the common food contact materials (FCMs) that are widely used in daily life. However, little is known regarding the effects of different food simulants on the pollution characteristics of microplastics derived from food containers, as well as the toxic effects of the chemical substances that are leached from them. Extracts were obtained by adding organic solvents into plastic containers (polypropylene, PP; polystyrene, PS) to simulate aqueous, alcoholic, and fatty environments. The extracted substances and their toxic effects were then assessed by counting and characterizing the resulting microplastics and performing bio-acute toxicity assays. The results demonstrated that the highest abundance of microplastics occurred in PS containers in fatty environments, which was likely due to the rough surface of the PS. In contrast, organic solvents seemed more conducive to the migration of substances. Furthermore, the PP and PS extracts in an alcohol and fatty environment have significant impacts on zebrafish embryo development, including arrhythmia, pericardial cysts, and spinal curvature.

Dissipation, uptake, translocation and accumulation of five phthalic acid esters in sediment-Zizania latifolia system

The dissipation, uptake, translocation and accumulation of phthalic acid esters (PAEs) including diallyl phthalate (DAP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP) and di-(2-ethylhexyl) phthalate (DEHP) in sediment-Zizania latifolia system were investigated by gas chromatography-flame ionization detector after a QuEChERS pretreatment method. The dissipation rates of PAEs in sediment were positively correlated with exposure time, and more than 68.12% of PAEs in sediment were decreased after 28 d even when the spiked contents were extremely high. All the five PAEs could be taken up by roots from contaminated sediment and subsequently be transported into stems and leaves. There were significant linear correlations between the sediment content and the content in each tissue. DEHP was most readily transported from sediment to roots and stems, followed by BBP, DBP, DIBP and DAP, whereas the order of transportation from roots to leaves was reversed. During 28 d of exposure, the average concentration of each PAE in stems was the highest, followed by roots, leaves and edible parts. DEHP and BBP were the major contaminants in edible parts but could not pose a risk to human health. The accumulation of PAEs in edible parts was influenced by the species and concentration of PAEs as well as the survival time and harvest time of edible parts. The differences in uptake and translocation behaviors among PAEs in plant tissues were significantly correlated to their physicochemical properties, such as alkyl chain length and octanol/water partition coefficient (logK_ow). The results reveal that Zizania latifolia is not only a kind of safe food, but also a potential plant to remediate contaminated sediment by accumulating and degrading PAEs from the habitats.

Groundwater contamination pathways of phthalates and bisphenol A: origin, characteristics, transport, and fate - A review

Phthalic acid esters (PAEs) or phthalates and bisphenol A (BPA) are emerging organic contaminants (EOCs) that may harm biota and human health. Humans can be exposed to these contaminants by drinking water consumption from water sources such as groundwater. Before their presence in aquifer systems, phthalates and BPA can be found in many matrices due to anthropogenic activities, which result in long-term transport to groundwater reservoirs by different mechanisms and reaction processes. The worldwide occurrence of phthalates and BPA concentrations in groundwater have ranged from 0.1 × 10^-3 to 3 203.33 µg L^-1 and from 0.09 × 10^-3 to 228.04 µg L^-1, respectively. Therefore, the aim of this review is to describe the groundwater contamination pathways of phthalates and BPA from the main environmental sources to groundwater. Overall, this article provides an overview that integrates phthalate and BPA environmental cycling, from their origin to human reception via groundwater consumption. Additionally, in this review, the readers can use the information provided as a principal basis for existing policy ratification and for governments to develop legislation that may incorporate these endocrine disrupting compounds (EDCs) as priority contaminants. Indeed, this may trigger the enactment of regulatory guidelines and public policies that help to reduce the exposure of these EDCs in humans by drinking water consumption.

Phthalates - A family of plasticizers, their health risks, phytotoxic effects, and microbial bioaugmentation approaches

Phthalates are a family of reprotoxicant compounds, predominantly used as a plasticizer to improve the flexibility and longevity of consumable plastic goods. After their use these plastic products find their way to the waste disposal sites where they leach out the hazardous phthalates present within them, into the surrounding environment, contaminating soil, groundwater resources, and the nearby water bodies. Subsequently, phthalates move into the living system through the food chain and exhibit the well-known phenomenon of biological magnification. Phthalates as a primary pollutant have been classified as 1B reprotoxicants and teratogens by different government authorities and they have thus imposed restrictions on their use. Nevertheless, the release of these compounds in the environment is unabated. Bioremediation has been suggested as one of the ways of mitigating this menace, but studies regarding the field applications of phthalate utilizing microbes for this purpose are limited. Through this review, we endeavor to make a deeper understanding of the cause and concern of the problem and to find out a possible solution to it. The review critically emphasizes the various aspects of phthalates toxicity, including their chemical nature, human health risks, phytoaccumulation and entry into the food chain, microbial role in phthalate degradation processes, and future challenges.

Adsorption of di (2-ethylhexyl) phthalate (DEHP) to microplastics in seawater: a comparison between pristine and aged particles

Microplastics (MPs) are a widely distributed pollutant and have been attracting global attention. The increasing abundance of MPs in marine environments has raised concern about their adverse effects on marine organisms and influence on the fate of contaminants in seawater. In this study, we investigated the effects of natural aging on the adsorption of di (2-ethylhexyl) phthalate (DEHP), one of the most widely used phthalic acid esters (PAEs), in two types of MPs (polyethylene and polystyrene). Biofilm was observed on the surface of MPs after 3-month exposure in seawater. Atomic force microscopy revealed there were significant physical changes in the MPs after aging. Aging in coastal seawater for 3 months significantly reduced the MPs' surface roughness and adhesion, and increased the Young's modulus at the same time. Adsorption isotherms of DEHP indicated that aged MPs had stronger binding capacity of the organic contaminant than pristine MPs. Our data shed some light on the biogeochemical role of MPs in marine environments.

Nanoplastic impacts on the foliar uptake, metabolism and phytotoxicity of phthalate esters in corn (Zea mays L.) plants

Nanoplastic pollution in terrestrial plants is of increasing concern for its negative effects on living organisms. However, the impacts of nanoplastics on chemical processes and plant physiology of phthalate esters (PAEs) remain unclear. The present work offers insight into the foliar uptake, metabolism and phytotoxicity of two typical PAEs, namely, di-n-butyl phthalate (DBP) and di-(2-ethylhexyl) phthalate (DEHP), in corn (Zea mays L.) seedlings and the effects of amino-functionalized polystyrene nanoplastics (PSNPs-NH₂). The presence of PSNPs-NH₂ increased DBP and DEHP accumulation in the leaves by 1.36 and 1.32 times, respectively. PSNPs-NH₂ also promoted the leaf-to-root translocation of DBP and DEHP, with the translocation factor increasing by approximately 1.05- and 1.16-fold, respectively. Furthermore, the addition of PSNPs-NH₂ significantly enhanced the transformation of PAEs to their primary metabolites, mono-butyl phthalate and mono(2-ethylhexyl) phthalate in corn leaves and roots. The co-presence of PSNPs-NH₂ and PAEs showed stronger impairment of photosystem II efficiency via the downregulation of transporter D1 protein, thus exhibiting a greater inhibitory effect on plant growth. Our findings reveal that nanoplastics promote the foliar uptake and transformation of PAE chemicals in crops and exacerbate their toxicity to crop plants, thereby threatening agricultural safety and human health.

Biochemical pathways and associated microbial process of di-2-ethyl hexyl phthalate (DEHP) enhanced degradation by the immobilization technique in sequencing batch reactor

A bacterial strain ASLT-13 was successfully isolated from activated sludge and identified as Pseudomonas amygdali. Gas chromatograph-mass spectrometer (GC-MS) analysis indicated that strain ASLT-13 could completely mineralize di 2-ethyl hexyl phthalate (DEHP). DEHP was first metabolized from the longer side chain of the benzene ring into shorter branches (Phatlalic mono-esters) like Dibutyl phthalate (DBP) under the action of degrading genes. DBP was then converted into di-methyl phthalate (DMP), and then hydrolysed to phthalic acid (PA). PA was eventually converted to CO₂ and H₂O through the TCA cycle. The optimal conditions for immobilization were the sodium alginate (SA) concentration of 6%, CaCl₂ concentration of 5%, ratio of bacteria and SA of 1:1, crosslinking time of 6 h. Bacterial quantity and community structure in sequencing batch reactors (SBRs) was investigated by q-PCR and high-throughput sequencing. The results indicated that DEHP removal efficiency was significantly enhanced by immobilization. Arthrobacter, Acinetobacter, Bacillus and Rhodococcus were the predominant genera for DEHP degradation. This study suggested that the cell immobilization technology had a potential application in DEHP wastewater treatment.

Biodegradation of di-n-octyl phthalate by Gordonia sp. Lff and its application in soil

A previous isolated Gordonia sp. (Lff) was used to degrade di-n-octyl phthalate (DOP) contamination in both aqueous solution and soil. The influence of temperature, pH, inoculum size, salt content and initial concentration of DOP on DOP degradation by Lff were analysed. The response of soil bacterial community to DOP and Lff was also analysed by Illumina MiSeq sequence method. Results showed that the optimal temperature, pH, inoculum size and salt content were 35^oC, 8.0, 5% and <5%, respectively. Under the optimal condition, more than 91.25% of DOP with different initial concentrations (100-2000 mg/L) could be degraded by Lff. Kinetics analysis indicated that biodegradation of DOP by Lff could be described by first-order kinetics (R² > 0.917) with the half-life (t_1/2) changing irregularly between 0.58 and 0.83 d. In addition, Lff enhanced the removal of DOP in soil and alleviated the toxicity of DOP on soil microorganisms. Furthermore, its influence on soil bacterial community is not obvious. These results suggested that Lff was effective in remediating DOP contamination in different environments.

Facile and Selective Determination of Total Phthalic Acid Esters Level in Soft Drinks by Molecular Fluorescence Based on Petroleum Ether Microextraction and Selective Derivation by H2SO4

Determining the level of phthalic acid esters (PAEs) in packaged carbonated beverages is a current need to ensure food safety. High-selectivity and -accuracy identification of individual PAEs can be achieved by chromatographic and mass spectrometric (MS) techniques. However, these methods are slow; involve complicated, expensive instruments in professional laboratories; and consume a large amount of organic solvents. As such, a food analysis method is needed to conveniently and rapidly evaluate multiple contaminants on site. In this study, with the assistance of ultrasound, we quickly determined the total PAEs in soft drinks using 1.5 mL of petroleum ether in one step. Then, we determined the characteristic molecular fluorescence spectrum of all PAEs in samples (excitation (Ex)/emission (Em) at 218/351 nm) using selectively concentrated sulfuric acid derivatization. The relative standard deviations of the fluorescent intensities of mixed solutions with five different PAEs were lower than 7.1% at three concentration levels. The limit of detection of the proposed method is 0.10 μmol L−1, which matches that of some of the chromatographic methods, but the proposed method uses less organic solvent and cheaper instruments. These microextraction devices and the fluorescence spectrometer are portable and provide an instant result, which shows promise for the evaluation of the total level of PAEs in beverages on site. The proposed method successfully detected the total level of PAEs in 38 kinds of soft drink samples from local supermarkets, indicating its potential for applications in the packaged beverage industry.

Diversity of microbial community structure and their association with phthalic acid esters and physicochemical parameters in informal landfills

Informal landfill is a common waste treatment method employed in rural areas of China, and phthalic acid esters (PAEs) are one of the typical pollutants in landfill leachate. However, there is no corresponding theoretical basis for whether microbial treatment technology can be used to reduce environmental risk of PAEs in informal landfills. Thus, a typical informal landfill site in northern China was selected and approximately 1,133,023 effective sequences were obtained from 21 samples collected from three layers (different deposit depths) of the landfill. This research explored the correlation between PAEs and the composition and distribution of microbial community in specific environments of informal landfill sites. Here we found that dis(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DOP), and diethyl phthalate (DEP) were positively and significantly correlated with Bhargavaea, Planococcus, Virgibacillus, and Oceanobacillus, respectively. The redundancy analysis demonstrated that moisture content, pH, NO2--N, and SUVA254 among the seven physicochemical factors (pH, TN, NO3--N,NO2--N,NH4+-N, SUVA254, and moisture content) significantly affected bacterial communities. The research conclusion can provide theoretical basis for the degradation technology of PAEs by microorganism and research basis for the treatment of informal landfill sites.

Phthalates removal from wastewater by different methods - a review

Phthalate esters are commonly used as plasticizers to improve the durability and workability of polymeric materials, locating and identifying them in various contexts has become a major challenge. Because of their ubiquitous use in plastic packaging and personal care items, as well as their tendency to leach out of these materials, phthalates have been detected in a variety of aquatic situations, including surface water, groundwater, drinking water, and wastewater. Phthalate esters have been shown to affect reproductive health and physical growth by disrupting the endocrine system. As a result, developing energy-efficient and effective technologies to eliminate these harmful substances from the atmosphere has become more important and urgent. This paper examines the existing techniques for treating phthalates and degradation mechanisms, as well as knowledge gaps and future research directions. These technologies include adsorption, electrochemical, photocatalysis, membrane filtration and microbial degradation. Adsorption and photo catalysis are the most widely used techniques for phthalate removal, according to the literature survey papers.

3-Aminophthalic acid, a new cereblon ligand for targeted protein degradation by O'PROTAC

In this study, we identified 3-aminophthalic acid as a new ligand of cereblon (CRBN) E3 ubiquitin ligase and developed a phthalic acid-based O'PROTAC for degradation of the ERG transcription factor. This phthalic acid-based O'PROTAC presented an efficacy in degrading ERG comparable to those displayed by pomalidomide-based ERG O'PROTACs. Moreover, phthalic acid-being more chemically stable and economical than classical immunomodulatory drugs (IMiDs)-represents, as a ligand, a new alternative for the development of PROTACs, especially O'PROTACs.

Butyl Benzyl Phthalate in Urban Sewage by Magnetic-Based Immunoassay: Environmental Levels and Risk Assessment

A magnetic-based immunoassay (MBI) combined with biotin-streptavidin amplification was proposed for butyl benzyl phthalate (BBP) investigation and risk assessment. The values of LOD (limit of detection, IC10) and IC50 were 0.57 ng/mL and 119.61 ng/mL, with a detection range of 0.57-24,977.71 ng/mL for MBI. The specificity, accuracy and precision are well demonstrated. A total of 36 environmental water samples of urban sewage from Zhenjiang, China, were collected and assessed for BBP contamination. The results show that BBP-positive levels ranged from 2.47 to 89.21 ng/mL, with a positive rate of 77.8%. The health effects of BBP in the urban sewage were within a controllable range, and the ambient severity for health (ASI) was below 1.49. The highest value of AS for ecology (ASII) was 7.43, which indicates a potential harm to ecology. The entropy value of risk quotient was below 100, the highest being 59.47, which poses a low risk to the environment and ecology, indicating that there is a need to strengthen BBP controls. The non-carcinogenic risk of BBP exposure from drinking water was higher for females than that for males, and the non-carcinogenic risk from drinking-water and bathing pathways was negligible. This study could provide an alternative method for detecting BBP and essential information for controlling BBP contamination.

Evaluation of natural gum-based cryogels for soft tissue engineering

In this study, three natural biomaterials, Locust bean gum (LBG), Xanthan gum (XG), and Mastic gum (MG), were combined to form cryogel scaffolds. Thermal and chemical characterizations revealed the successful blend formation from LBG-XG (LX) and LBG-XG-MG (LXM) polymers. All blends resulted in macro-porous scaffolds with interconnected pore structures under the size of 400 μm. The swollen cryogels had similar mechanical properties compared with other polysaccharide-based cryogels. The mean tensile and compressive modulus values of the wet cryogels were in the range of 3.5-11.6 kPa and 82-398 kPa, respectively. The sustained release of the small molecule Kartogenin from varying concentrations and ratios of cryogels was in between 32 and 66% through 21 days of incubation. Physical, mechanical, and chemical properties make LX and LXM polysaccharide-based cryogels promising candidates for cartilage and other soft tissue engineering, and drug delivery applications.

Environmental obesogens (bisphenols, phthalates and parabens) and their impacts on adipogenic transcription factors in the absence of dexamethasone in 3T3-L1 cells

Endocrine-disrupting chemicals (EDCs) are exogenous compounds that are capable of blocking or mimicking the action of bioidentical hormones. Obesogenic EDCs, commonly called obesogens, play an important role in adipogenesis. This study was carried out to determine the effects of select obesogens and their alternatives on adipogenesis in 3T3-L1 cells under dexamethasone (DEX)-free conditions. Preadipocytes were treated with a cocktail of 3-isobutyl-1-methylxanthine (IBMX) and insulin to which an obesogen (viz., bisphenol A (BPA) or its analogs BPS and BPF; dioctyl terephthalate; tris (2-ethylhexyl) trimellitate; or various parabens) had been added. A mixture containing IBMX, insulin, and DEX, which constitute the typical hormonal cocktail required for adipocyte differentiation, was used as the control against which the other groups were measured. The obesogens and the PBA analogs all had evident adipogenic effects under DEX-free conditions, as was determined by estimating the lipid accumulation levels in the cells using Oil Red O staining. Furthermore, the expression of adipogenic transcription factors (CCAAT/enhancer-binding protein-alpha, peroxisome proliferator-activated receptor-gamma, and adipocyte protein 2) was induced by 20 μM of BPA, BPS, or BPF at both the mRNA and protein levels, as determined through reverse transcription-polymerase chain reaction and western blot assays. Taken together, the results reveal that adipocyte differentiation can be induced by obesogens and their alternatives in the absence of DEX.

Postsynthetic Modification of the Magnetic Zirconium-Organic Framework for Efficient and Rapid Solid-Phase Extraction of DNA

In recent years, several approaches have been applied to modify metal-organic frameworks (MOFs) owing to their excellent structural tunability such as higher extraction efficiency than that of primitive crystals. Herein, Zr-based MOFs (UiO-66-NH₂) with a suitable size modulated by acetic acid were successfully synthesized for effective DNA extraction. The bonding conformations and adsorption mechanism indicated a high affinity between UiO-66-NH₂ and the DNA molecules. Furthermore, Fe₃O₄ nanoparticles were immobilized on the UiO-66-NH₂ surface to allow MOFs with magnetism. The magnetic zirconium-organic framework (MZMOF) retained the intact structure of MOFs and simplified subsequent extraction operations. In the DNA recovery investigation, MZMOF showed high recovery efficiency for both short-stranded DNA (90.4%) and pseudovirus DNA (95.1%). In addition, it showed superior DNA extraction efficiency from plasma (57.6%) and swab preservation solution (86.5%). The prepared MZMOF was employed for highly specific extraction of viral DNA and cfDNA from samples. To further simplify the extraction process, MZMOF was applied to immiscible phase filtration assisted by a surface tension (IFAST) chip for facilitating rapid DNA extraction with sensitive point-of-care testing. The developed MZMOF-based extraction method has significant potential for increasing the demand for rapid and efficient nucleic acid extraction.

Chemo-Biological Upcycling of Poly(ethylene terephthalate) to Multifunctional Coating Materials

Chemo-biological upcycling of poly(ethylene terephthalate) (PET) developed in this study includes the following key steps: chemo-enzymatic PET depolymerization, biotransformation of terephthalic acid (TPA) into catechol, and its application as a coating agent. Monomeric units were first produced through PET glycolysis into bis(2-hydroxyethyl) terephthalate (BHET), mono(2-hydroxyethyl) terephthalate (MHET), and PET oligomers, and enzymatic hydrolysis of these glycolyzed products using Bacillus subtilis esterase (Bs2Est). Bs2Est efficiently hydrolyzed glycolyzed products into TPA as a key enzyme for chemo-enzymatic depolymerization. Furthermore, catechol solution produced from TPA via a whole-cell biotransformation (Escherichia coli) could be directly used for functional coating on various substrates after simple cell removal from the culture medium without further purification and water-evaporation. This work demonstrates a proof-of-concept of a PET upcycling strategy via a combination of chemo-biological conversion of PET waste into multifunctional coating materials.

In Search of Effective UiO-66 Metal-Organic Frameworks for Artificial Kidney Application

The removal of uremic toxins from patients with acute kidney injury is a key issue in improving the quality of life for people requiring peritoneal dialysis. The currently utilized method for the removal of uremic toxins from the human organism is hemodialysis, performed on semipermeable membranes where the uremic toxins, along with small molecules, are separated from proteins and blood cells. In this study, we describe a mixed-linker modulated synthesis of zirconium-based metal-organic frameworks for efficient removal of uremic toxins. We determined that the efficient adsorption of uremic toxins is achieved by optimizing the ratio between -amino functionalization of the UiO-66 structure with 75% of -NH2 groups within organic linker structure. The maximum adsorption of hippuric acid and 3-indoloacetic acid was achieved by UiO-66-NH2 (75%) and by UiO-66-NH2 (75%) 12.5% HCl prepared by modulated synthesis. Furthermore, UiO-66-NH2 (75%) almost completely adsorbs 3-indoloacetic acid bound to bovine serum albumin, which was used as a model protein to which uremic toxins bind in the human body. The high adsorption capacity was confirmed in recyclability test, which showed almost 80% removal of 3-indoloacetic acid after the third adsorption cycle. Furthermore, in vitro cytotoxicity tests as well as hemolytic activity assay have proven that the UiO-66-based materials can be considered as potentially safe for hemodialytic purposes in living organisms.

Decahexanuclear Zinc(II) Coordination Container Featuring a Flexible Tetracarboxylate Ligand: A Self-Assembly Supermolecule for Highly Efficient Drug Delivery of Anti-Inflammatory Agents

The application of a coordination container in biomedicine is hindered by single binding domains and unsatisfactory biostability and biocompatibility. Herein, we designed a sulfonylcalix[4]arene-based decahexanuclear zinc(II) coordination container employing a flexible tetracarboxylate ligand as a linker and utilized it as a novel drug delivery system. The coordination container consisting of one endo and four exo cavities provides multiple binding domains for efficient encapsulation of drug molecules as clearly revealed by systematic host-guest studies using NMR techniques of ¹H NMR titration experiments and 2D NOESY and diffusion-ordered NMR spectroscopy studies. Incorporation of a flexible p-phenylene-bis(methanamino) spacer into the container via the carboxylate linker allowed a stepwise drug loading process through sequential binding at endo and exo cavities, as well as enabling pH-responsive stepwise drug release. The drug-loaded coordination container not only exhibits excellent biostability and biocompatibility but also provides encouraging therapeutic efficiency toward inflammatory macrophages as revealed by in vitro studies. The novel strategy for engineering the endo cavity of a coordination container provides a new approach to achieving controlled drug delivery and opens up new opportunities for designing novel functional supramolecular materials.

Fabrication of Raspberry-like Cytochrome C Surface-Imprinted Nanoparticles Based on MOF Composites for High-Performance Protein Separation

The development of high-performance protein-imprinted materials is vital to meet the requirements of proteomics research but remains a challenge. Herein, a new type of raspberry-like cytochrome C-imprinted nanoparticle was first designed and fabricated via surface imprinting technology combined with a template immobilization strategy. In particular, the state-of-the-art metal-organic framework (MOF)/carbon nanoparticle (CN) composites were selected as protein immobilization carriers for two advantages: (1) the composites reflected the intrinsic characteristics of MOFs including flexible design, facile preparation, and extensive interactions with proteins and (2) the utilization of composites also overcame the issue associated with the severe agglomeration of individual MOFs during the post-use process. Therefore, the as-prepared composites exhibited a regular raspberry-like shape with good dispersion (polydispersity index (PDI) < 0.25), high specific surface area (551.4 m² g^-1), and outstanding cytochrome C immobilization capacity (900 mg g^-1). Furthermore, a zwitterionic monomer was chosen to participate in the synthesis of an imprinting layer to reduce the nonspecific binding with proteins. As a result, the unique design presented here in both the protein immobilization carrier and the selected polymer composition endowed the imprinted material (noted as CN@UIO-66@MIPs) with the excellent ability for cytochrome C enrichment with extremely high recognition ability (imprinting factor (IF) = 6.1), rapid adsorption equilibrium time (40 min), and large adsorption capacity (815 mg g^-1). Furthermore, encouraged by the experimental results, we successfully used CN@UIO-66@MIPs to specifically capture cytochrome C in mixed protein solutions and biological samples, which proved them to be a potential candidate for protein separation and purification.

UiO-66-NH2 and Zeolite-Templated Carbon Composites for the Degradation and Adsorption of Nerve Agents

Composites of metal-organic frameworks and carbon materials have been suggested to be effective materials for the decomposition of chemical warfare agents. In this study, we synthesized UiO-66-NH2/zeolite-templated carbon (ZTC) composites for the adsorption and decomposition of the nerve agents sarin and soman. UiO-66-NH2/ZTC composites with good dispersion were prepared via a solvothermal method. Characterization studies showed that the composites had higher specific surface areas than pristine UiO-66-NH2, with broad pore size distributions centered at 1-2 nm. Owing to their porous nature, the UiO-66-NH2/ZTC composites could adsorb more water at 80% relative humidity. Among the UiO-66-NH2/ZTC composites, U0.8Z0.2 showed the best degradation performance. Characterization and gas adsorption studies revealed that beta-ZTC in U0.8Z0.2 provided additional adsorption and degradation sites for nerve agents. Among the investigated materials, including the pristine materials, U0.8Z0.2 also exhibited the best protection performance against the nerve agents. These results demonstrate that U0.8Z0.2 has the optimal composition for exploiting the degradation performance of pristine UiO-66-NH2 and the adsorption performance of pristine beta-ZTC.

Highly-Efficient Sulfonated UiO-66(Zr) Optical Fiber for Rapid Detection of Trace Levels of Pb2

Lead detection for biological environments, aqueous resources, and medicinal compounds, rely mainly on either utilizing bulky lab equipment such as ICP-OES or ready-made sensors, which are based on colorimetry with some limitations including selectivity and low interference. Remote, rapid and efficient detection of heavy metals in aqueous solutions at ppm and sub-ppm levels have faced significant challenges that requires novel compounds with such ability. Here, a UiO-66(Zr) metal-organic framework (MOF) functionalized with SO3H group (SO3H-UiO-66(Zr)) is deposited on the end-face of an optical fiber to detect lead cations (Pb2+) in water at 25.2, 43.5 and 64.0 ppm levels. The SO3H-UiO-66(Zr) system provides a Fabry–Perot sensor by which the lead ions are detected rapidly (milliseconds) at 25.2 ppm aqueous solution reflecting in the wavelength shifts in interference spectrum. The proposed removal mechanism is based on the adsorption of [Pb(OH2)6]2+ in water on SO3H-UiO-66(Zr) due to a strong affinity between functionalized MOF and lead. This is the first work that advances a multi-purpose optical fiber-coated functional MOF as an on-site remote chemical sensor for rapid detection of lead cations at extremely low concentrations in an aqueous system.

A Novel Cd({II}) Isophthalate Complex with Triethanolamine: Crystal Structure, Fluorescence and Antimicrobial Activity

A mixed ligand Cd(II) complex [Cd(IsoPht)(TEA)H2O]·3H2O was synthesized for the first time by using isophthalic acid (H2IsoPht) and tetradentate triethanolamine (TEA) and characterized by X-ray single-crystal diffraction, FT-IR, and thermogravimetric analysis (TGA). This novel complex crystallizes in the triclinic system with P-1 space group and distorted monocapped trigonal prismatic geometry. The Cd(II) has seven coordinates with bidentate Isopht, a TEA in the tetradentate mode, and an aqua ligand. The fluorescence properties of the Cd(II) complex and TEA ligand were investigated at room temperature. The present Cd(II) complex was also tested for its antimicrobial activity by in vitro agar diffusion method against some Gram-positive and Gram-negative bacteria and a fungus.

Synthesis and surface modification of mesoporous metal-organic framework (UiO-66) for efficient pH-responsive drug delivery and lung cancer treatment

This paper applied mesoporous metal-organic frameworks (MOFs) of UiO-66 particles for pH-responsive doxorubicin (DOX) delivery and cancer treatment. Mesoporous structured UiO-66 MOFs were synthesized, and carboxymethylcellulose (CMC) was loaded for sensitive pH response and also as a linker to encapsulate the chemotherapeutic drug of DOX. The composite of UiO-66/CMC@DOX was synthesized, and the loading capacity was as high as 45μg DOX per mg of the carrier. The structure and crystalization of the UiO-66 MOFs were determined by the Transmitting Electron Microscope (TEM) and x-ray diffraction methods, while the loading of CMC and DOX was inspected by Fourier Transform InfraRed (FT-IR) and UV-vis spectroscopy. The DOX release from UiO-66/CMC@DOX was tested under different pH at 37 °C. The DOX accumulative release could reach 78% under the pH of 5. A lower pH was more favorable for DOX release due to the CMC shrinking and higher DOX solubility in an acidic environment. The cytotoxicity study indicated that, under the DOX concentration of 4μg ml^-1, the A549 cell (Lung Carcinoma Cell Line) viability of UiO-66/CMC was 28%, which was lower than that from free DOX solution (47%). UiO-66 MOFs were demonstrated to be an efficient drug delivery carrier for chemotherapeutic drug and release.

Water sorption and diffusion in cellulose acetate: The effect of plasticisers

The conservation of cellulose acetate plastics in museum collections presents a significant challenge, due to the material's instability. Several studies have led to an understanding of the role of relative humidity (RH) and temperature in the decay process. It is well established that a major decay mechanism in cellulose acetate museum objects is the loss of plasticiser, and that the main decay mechanism of the polymer chain involves hydrolysis reactions. This leads to the loss of sidechain groups and the breakdown of the main polymer backbone. However, interactions between these decay mechanisms, specifically the way in which the loss of plasticiser can modify the interaction between cellulose acetate and water, has not yet been investigated. This research addresses the role of RH, studying the sorption and diffusion of water in cellulose acetate and how this interaction can be affected by plasticiser concentration using Dynamic Vapour Sorption (DVS).

Simplified heavy-atom derivatization of protein structures via co-crystallization with the MAD tetragon tetrabromoterephthalic acid

The phase problem is a persistent bottleneck that impedes the structure-determination pipeline and must be solved to obtain atomic resolution crystal structures of macromolecules. Although molecular replacement has become the predominant method of solving the phase problem, many scenarios still exist in which experimental phasing is needed. Here, a proof-of-concept study is presented that shows the efficacy of using tetrabromoterephthalic acid (B4C) as an experimental phasing compound. Incorporating B4C into the crystal lattice using co-crystallization, the crystal structure of hen egg-white lysozyme was solved using MAD phasing. The strong anomalous signal generated by its four Br atoms coupled with its compatibility with commonly used crystallization reagents render B4C an effective experimental phasing compound that can be used to overcome the phase problem.

Toughening and thermal characteristics of plasticized polylactide and poly(butylene adipate-co-terephthalate) blend films: Influence of compatibilization

Bio-based polylactide (PLA) derived from fermented corn starch was blended with poly(butylene adipate-co-terephthalate) (PBAT) and triethyl citrate (TEC) plasticizer using a twin screw extruder. PLA-grafted-maleic anhydride (PLA-g-MA) synthesized via reactive maleation and toluene diisocyanate (TDI) were used as compatibilizers for these blends. Improvements in the toughness, phase morphology and thermal behavior of the PLA/PBAT/TEC (PBT) blend films were evaluated in terms of compatibilization effect. The compatibilized PBT blends showed noticeably superior tensile strength, elongation, and tensile-impact toughness compared with uncompatibilized ones due to the greater compatibility of PLA and PBAT phases. Well dispersed PBAT particles and many elongated fibrils were observed on the fracture surface of the film after compatibilization. Both TDI and PLA-g-MA were effective compatibilizers for the blend at an appropriate level. The addition of PLA-g-MA to the plasticized blends not only significantly enhanced mechanical properties and phase adhesion, but also accelerated cold crystallization and formed crystal perfection, a result of improvements in chain mobility and packing efficiency. Differential scanning calorimetry (DSC) results revealed changes in T_g and melting behavior of the blends from influences of compatibilization. The different types and levels of compatibilizer affected the thermal stability of the PLA phase but did not affect char remaining.

Magnetic nanocarriers as a therapeutic drug delivery strategy for promoting pain-related motor functions in a rat model of cartilage transplantation

Cartilage is an avascular tissue with low cellularity and insufficient self-repair response. In clinical practice, a large articular cartilage defect is usually fixed by cartilage transplantation. Importantly, the fast repair process has been demanded postoperatively in the area between the host cartilage and the transplanted cartilage. In the past few years, magnetic nanoparticles have drawn great attention due to their biocompatible, biodegradable, and nontoxic properties. In addition, the nanoparticles can easily pass through the cell plasma membrane and increase the cellular uptake efficiency. Here, a therapeutic drug delivery strategy was proposed for cartilage repair. The prepared kartogenin (KGN)-conjugated magnetic nanocarriers (KGN@NCs) promoted the viability of chondrocytes in vitro. In a rat model of cartilage transplantation, intra-articularly delivered KGN@NCs generated cartilage with a flat surface and a high level of aggrecan in vivo. Notably, KGN@NCs were also capable of improving the pain-related motor functions. They promoted the motor functional parameters including the print area and intensity to restore to a normal level compared with the single KGN. Therefore, these therapeutic drug nanocarriers provided the potential for cartilage repair.

A model for phthalic acid esters' biodegradability and biotoxicity multi-effect pharmacophore and its application in molecular modification

The objective of this study was to investigate 13 phthalic acid esters (PAEs) with medium or long straight-alkyl-chain, branching or unsaturated side chains, because their structural characteristics make them difficult to biodegrade or highly toxic. A biodegradability and biotoxicity multi-effect pharmacophore model was built using comprehensive evaluation method. The results suggested that introducing hydrophobic groups to the side chains of the PAEs could improve the molecules' biodegradability and biotoxicity effects simultaneously. Thus, 40 target PAE (HEHP, DNOP, DUP) derivatives were designed. Two environmentally friendly PAE derivatives (HEHP-Anthryl and HEHP-Naphthyl) were screened via the test of environmental friendliness and functionality. In addition, the biodegradation and biotoxicity of derivatives were found to have improved as a result of the change in van der Waals forces between molecules and their corresponding proteins. Moreover, the environmental safety of the screened PAE derivatives was confirmed by predicting the toxicity of their intermediates and calculating the energy barrier values for biodegradation and metabolic pathways. This study could provide theoretical guidance for the practical development of environmentally friendly plasticizer.