Electrochemical supercapacitive performance of spray deposited Co3O4 thin film nanostructures

Preparation and Electrochemical Properties of Co3O4 Supercapacitor Electrode Materials

A special gas-phase diffusion precipitation method with ammonia as the gas-phase diffusion precipitant was adopted. After fully reacting with different cobalt sources in a sealed space, the liquid funnel was separated and dried, and calcined at different temperatures for 2 h. The prepared Co3O4 powder was used as a supercapacitor (SCs) electrode to measure the electrochemical properties of the prepared material. The influences of different cobalt sources and sodium phosphate monobasic dehydrate on the preparation of Co3O4 SCs electrodes were investigated. The optimal performance of Co3O4 was 640 F·g−1 before modification, and this reached 1140 F·g−1 after modification, which was an improvement of 78.1%.

Recent Advance in Co3O4 and Co3O4-Containing Electrode Materials for High-Performance Supercapacitors

Among the popular electrochemical energy storage devices, supercapacitors (SCs) have attracted much attention due to their long cycle life, fast charge and discharge, safety, and reliability. Transition metal oxides are one of the most widely used electrode materials in SCs because of the high specific capacitance. Among various transition metal oxides, Co3O4 and related composites are widely reported in SCs electrodes. In this review, we introduce the synthetic methods of Co3O4, including the hydrothermal/solvothermal method, sol-gel method, thermal decomposition, chemical precipitation, electrodeposition, chemical bath deposition, and the template method. The recent progress of Co3O4-containing electrode materials is summarized in detail, involving Co3O4/carbon, Co3O4/conducting polymer, and Co3O4/metal compound composites. Finally, the current challenges and outlook of Co3O4 and Co3O4-containing composites are put forward.

In situ growth of α-Fe2O3@Co3O4 core-shell wormlike nanoarrays for a highly efficient photoelectrochemical water oxidation reaction

Photoelectrochemical (PEC) water splitting represents a promising strategy to convert solar energy into chemical energy in the form of hydrogen, but its performance is severely limited by the sluggish water oxidation reaction. Herein, for the first time, we report the direct assembly of an ultrathin, uniform, and dense layer of Co3O4 on wormlike nanostructured hematite (WN-α-Fe2O3) to form a large-area and high-density WN-α-Fe2O3@Co3O4 core-shell nanoarray via in situ hydrothermal growth followed by calcination, in which the electrostatic force between WN-α-Fe2O3 and the reactants, pH- and temperature-controlled structures of WN-α-Fe2O3, and ultralow nucleation rate of Co3O4 precursors all play critical roles. The obtained heteronanostructure array shows a photocurrent density of 3.48 mA cm-2, which is 4.05 times higher than that of pristine WN-α-Fe2O3 (0.86 mA cm-2), an onset potential of ∼0.62 V, 60 mV lower than that of α-Fe2O3 (∼0.68 V), and a photoconversion efficiency of 0.55%, 3.93 times higher than that of WN-α-Fe2O3 (0.14%). This is among the highest performances reported for Fe2O3-based photoanodes for water splitting. It is discovered that the Co3O4 shells can significantly enhance the charge separation, accelerate the charge transport and transfer, and reduce the charge transfer resistance from the photoelectrode to the electrolyte for a fast water oxidation reaction, thereby greatly promoting the PEC water oxidation performance of pristine WN-α-Fe2O3. This work not only creates a novel low-cost and Earth-abundant WN-α-Fe2O3@Co3O4 photoelectrode with superior PEC water oxidation performance and provides scientific insights into the enhancement mechanism, but also offers a general strategy for the in situ growth of water oxidation catalysts on various photoelectrodes with 3-D complex geometries for PEC water splitting.

Advances in nanostructures fabricated via spray pyrolysis and their applications in energy storage and conversion

This review provides insight into various nanostructures designed by spray pyrolysis and their applications in energy storage and conversion.