NiO-Fe2O3 based graphene aerogel as urea electrooxidation catalyst

Unraveling and regulating electrode-electrolyte integration towards high-performing MoS2 loaded fiber shaped supercapacitor

Molybdenum disulfide (MoS2) is touted as a highly promising material for fiber-shaped supercapacitors (FSCs) but limited by its low capacitance and unsatisfactory cycling stability. Here, we report a MoS2 deposited stainless steel wire (MoS2@SSW) that can be electrochemically intercalated with dual ions (Na+ and H+). A high capacitance of ∼1632.7 mF cm-2 at 0.4 mA cm-2 and high capacitance retention of 84.25 % after 10,000 cycles under sulfuric acid/sodium sulfate (H2SO4/Na2SO4) aqueous electrolyte is recorded for this system. This is mainly attributed to the pre-intercalation of H+ into MoS2 to form MoS-SH. This process redistributes the local charge regions on MoS2 surface and lowers the energy barrier for Na+ migration in MoS2 to facilitate the adsorption and intercalation of Na+. Notably, MoS2@SSW FSCs are integrated into three-dimensional space textiles as a proof-of-concept. This novel exploration of the nanointerface resulted by electrolyte engineering offers a feasible design paradigm for the development of high-performing FSCs.

Advanced hematite nanomaterials for newly emerging applications

Because of the combined merits of rich physicochemical properties, abundance, low toxicity, etc., hematite (α-Fe2O3), one of the most chemically stable compounds based on the transition metal element iron, is endowed with multifunctionalities and has steadily been a research hotspot for decades. Very recently, advanced α-Fe2O3 materials have also been developed for applications in some cutting-edge fields. To reflect this trend, the latest progress in developing α-Fe2O3 materials for newly emerging applications is reviewed with a particular focus on the relationship between composition/nanostructure-induced electronic structure modulation and practical performance. Moreover, perspectives on the critical challenges as well as opportunities for future development of diverse functionalities are also discussed. We believe that this timely review will not only stimulate further increasing interest in α-Fe2O3 materials but also provide a profound understanding and insight into the rational design of other materials based on transition metal elements for various applications.

Ultralight, Mechanically Enhanced, and Thermally Improved Graphene-Cellulose-Polyethyleneimine Aerogels for the Adsorption of Anionic and Cationic Dyes

Graphene-cellulose-polyethyleneimine aerogels (GA-MCC-PEI) were prepared using a simple, environmentally friendly method to remove anionic and cationic dyes in water. Graphene-cellulose hydrogels were prepared using a hydrothermal method and then immersed in a polyethyleneimine aqueous solution for 48 h to obtain graphene-cellulose-polyethyleneimine hydrogels, which were then freeze-dried. The light and porous composite aerogels had a good compression resistance, and the maximum allowable pressure of the graphene-cellulose-polyethyleneimine aerogel with a cellulose content of 43% was 21.76 kPa, which was 827 times its weight. Adsorption of the anionic dye amaranth and the cationic dye methylene blue by the graphene-cellulose-polyethyleneimine aerogel was satisfactorily modeled using the Langmuir isothermal equation, indicating monolayer adsorption. When the cellulose content was 39%, the equilibrium adsorption capacities of the composite aerogel for amaranth and methylene blue were 369.37 mg/g and 237.33 mg/g, respectively. This graphene-cellulose-polyethyleneimine aerogel can be used to remove dye pollutants in water to maintain ecological balance, thus broadening the application space of aerogel materials, that is, as adsorbents in different environments.

Ni-Fe phosphide deposited carbon felt as free-standing bifunctional catalyst electrode for urea electrolysis

A free-standing catalyst electrode for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) in a urea electrolysis cell was synthesized by electroplating a Ni-Fe alloy onto carbon felt, followed by phosphidation (P-NiFe@CF). The prepared P-NiFe@CF catalyst consisted of Ni5P4, NiP2, and FeP with 3D flower-like P-NiFe architecture on CF. P-NiFe@CF exhibited excellent electrocatalytic activity for the UOR (demanding only 1.39 V (vs. RHE) to achieve 200 mA cm-2), and for the HER with a low overpotential of 0.023 V (vs. RHE) at 10 mA cm-2, indicating its feasibility as a bifunctional catalyst electrode for urea electrolysis. A urea electrolysis cell with P-NiFe@CF as both the free-standing anode and cathode generated a current density of 10 mA cm-2 at a cell potential of 1.37 V (vs. RHE), which is considerably lower than that of water electrolysis, and also lower than previously reported values. The results indicate that the P-NiFe@CF catalyst electrodes can be used as free-standing bifunctional electrodes for urea electrolyzers.

Mechanically Strong, Low Thermal Conductivity and Improved Thermal Stability Polyvinyl Alcohol-Graphene-Nanocellulose Aerogel

Porous aerogel materials have advantages of a low density, low thermal conductivity and high porosity, and they have broad application prospects in heat insulation and building energy conservation. However, aerogel materials usually exhibit poor mechanical properties. Single-component aerogels are less likely to possess a good thermal stability and mechanical properties. It is necessary to prepare multiple-composite aerogels by reinforcement to meet practical application needs. In this experiment, a simple preparation method for polyvinyl alcohol (PVA)–graphene (GA)–nanocellulose (CNF) ternary composite aerogels was proposed. This is also the first time to prepare ternary composite aerogels by mixing graphene, nanocellulose and polyvinyl alcohol. A GA–CNF hydrogel was prepared by a one-step hydrothermal method, and soaked in PVA solution for 48 h to obtain a PVA–GA–CNF hydrogel. PVA–GA–CNF aerogels were prepared by freeze drying. The ternary composite aerogel has advantages of excellent mechanical properties, a low thermal conductivity and an improved thermal stability, because strong hydrogen bonds form between the PVA, GA and CNF. The composite aerogels were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffractometry, Brunauer–Emmett–Teller analysis, dynamic thermal analysis, thermogravimetry and thermal constant analysis to characterize the properties of the ternary composite aerogels. The lightweight, low-density and porous PVA–GA–CNF composite aerogels withstood 628 times their mass. The thermal conductivity of the composite aerogels was 0.044 ± 0.005 W/mK at room temperature and 0.045 ± 0.005 W/mK at 70 °C. This solid, low thermal conductivity and good thermal stability PVA–GA–CNF ternary composite aerogel has potential application in thermal insulation.

Ni-Co-B nanoparticle decorated carbon felt by electroless plating as a bi-functional catalyst for urea electrolysis

A free-standing catalyst electrode for urea electrolysis was synthesized by electroless plating of NiCoB alloy onto a flexible carbon felt. The synthesized NiCoB@C catalyst exhibited porous and partially amorphous metallic structure depending on its composition, as analysed by XRD, XPS, and TEM; thus, NiCoB@C catalyst showed a high catalytic activity for urea oxidation reaction as well as hydrogen evolution reaction. The required cell voltage in the electrolysis cell with NiCoB@C as anode and cathode was as low as 1.34 V for the current densities 10 mA cm^-2. Similar performance of the urea electrolysis for H₂ production using 0.33 M urea and a fresh urine in 1 M KOH was observed. The result indicated that NiCoB could be incorporated on to carbon felt by electroless plating, and it could be used as free-standing bifunctional electrodes for urea electrolysis using urea as well as urine.

A three-dimensional nanostructure of NiFe(OH) X nanoparticles/nickel foam as an efficient electrocatalyst for urea oxidation

Developing high-performance electrocatalysts for urea oxidation reaction (UOR) can not only solve the problem of environmental pollution, but also solve the problem of the energy crisis by producing hydrogen for electrodes. The preparation of porous three-dimensional nanostructures as efficient electrocatalysts has become important work. Here, we developed a novel three-dimensional (3D) nanostructure of NiFe(OH) X nanoparticles/nickel foam with a high active area by a simple electroplating method and a subsequent treatment with ferric ion solution. This structure shows much greater UOR activity than the control sample (Ni/Ni foam) with the potential of 1.395 V (vs. RHE) (with an overpotential of 1.025 V) for driving the current density of 100 mA cm-2 in 1.0 M KOH electrolyte with 0.33 M urea. This work not only provides rapid and large-scale preparation of a three-dimensional nanostructure, but also gives a new way to design and obtain high-performance electrocatalysts.

Metal-Organic Polymer-Derived Interconnected Fe-Ni Alloy by Carbon Nanotubes as an Advanced Design of Urea Oxidation Catalysts

The electrochemical urea oxidation reaction (UOR) is considered as a promising renewable source for harvesting energy from waste. We report a new synthetic design approach to produce an iron-nickel alloy nanocatalyst from a metal-organic polymer (MOP) by a single-step carbonization process at 500 °C, thus forming a core-shell of iron-nickel-coated carbon (C@FeNi) nanostructures wired by embedded carbon nanotubes (CNTs) (CNT/C@FeNi). Powder X-ray diffraction confirmed the formation of metallic FeNi₃ alloy nanoparticles (∼20 to 28 nm). Our experimental results showed that MOP containing CNTs acquired an interconnected hierarchical topology, which prevented the collapse of its microstructure during pyrolysis. Hence, CNT/C@FeNi shows higher porosity (10 times) than C@FeNi. The electrochemical UOR in alkaline electrolytes on these catalysts was studied using cyclic voltammetry (CV). The result showed a higher anodic current (3.5 mA cm^-2) for CNT/C@FeNi than for C@FeNi (1.1 mA cm^-2) at 1.5 V/RHE. CNT/C@FeNi displayed good stability in chronoamperometry experiments and a lower Tafel slope (33 mV dec^-1) than C@FeNi (41.1 mV dec^-1). In this study, CNT/C@FeNi exhibits higher exchange current density (3.2 μA cm^-2) than does C@FeNi (2 μA cm^-2). The reaction rate orders of CNT/C@FeNi and C@FeNi at a kinetically controlled potential of 1.4 V/RHE were 0.5 and 0.9, respectively, higher than the 0.26 of β-Ni(OH)₂, Ni/Ni(OH)₂ electrodes. The electrochemical impedance result showed a lower charge-transfer resistance for CNT/C@FeNi (61 Ω·cm^-2) than for C@FeNi (162 Ω·cm^-2), due to faster oxidation kinetics associated with the CNT linkage. Moreover, CNT/C@FeNi exhibited a lower Tafel slope and resistance and higher heterogeneity (25.2 × 10^-5 cm s^-1), as well as relatively high faradic efficiency (68.4%) compared to C@FeNi (56%). Thus, the carbon-coated FeNi₃ core connected by CNT facilitates lower charge-transfer resistance and reduces the UOR overpotential.

A highly active Ni-based anode material for urea electrocatalysis by a modified sol-gel method

A highly electroactive Ni-based catalyst for urea oxidation is prepared by a sol-gel method with bubbling of gel mixture. It is observed that the conditions for the gel formation strongly affect the morphology and electrochemical properties of the catalyst materials. As synthesized Ni-catalysts are characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The Ni-based catalyst prepared at optimum conditions in the scope of this study exhibits the urea oxidation activity of 570 mA mg^-1 (at 0.54 V). In a single urea/hydrogen peroxide fuel cell test, the Ni-catalyst provides maximum power densities of 19.6 and 36.4 mW cm^-2 at 30 and 70 °C, respectively. Additionally, the cell catalyst shows a stable voltage for 3 days. Thus, this work suggests that a novel Ni-based catalyst derived from a facile method can be used for urea oxidation and as an efficient anode material for urea fuel cells.

Designing Advanced Catalysts for Energy Conversion Based on Urea Oxidation Reaction

Urea oxidation reaction (UOR) is the underlying reaction that determines the performance of modern urea-based energy conversion technologies. These technologies include electrocatalytic and photoelectrochemical urea splitting for hydrogen production and direct urea fuel cells as power engines. They have demonstrated great potentials as alternatives to current water splitting and hydrogen fuel cell systems with more favorable operating conditions and cost effectiveness. At the moment, UOR performance is mainly limited by the 6-electron transfer process. In this case, various material design and synthesis strategies have recently been reported to produce highly efficient UOR catalysts. The performance of these advanced catalysts is optimized by the modification of their structural and chemical properties, including porosity development, heterostructure construction, defect engineering, surface functionalization, and electronic structure modulation. Considering the rich progress in this field, the recent advances in the design and synthesis of UOR catalysts for urea electrolysis, photoelectrochemical urea splitting, and direct urea fuel cells are reviewed here. Particular attention is paid to those design concepts, which specifically target the characteristics of urea molecules. Moreover, challenges and prospects for the future development of urea-based energy conversion technologies and corresponding catalysts are also discussed.

Metal-organic framework-derived Ni@C and NiO@C as anode catalysts for urea fuel cells

Highly porous self-assembled nanostructured Ni@C and NiO@C were synthesized via calcination of a Ni-based metal–organic framework. The morphology, structure, and composition of as synthesized Ni@C and NiO@C were characterized by SEM, FIB-SEM, TEM, and XRD. The electro-catalytic activity of the Ni@C and NiO@C catalysts towards urea oxidation was investigated using cyclic voltammetry. It was found that the Ni@C had a higher residual carbon content and a higher specific surface area than NiO@C, thus exhibiting an enhanced electrochemical performance for urea oxidation. A direct urea fuel cell with Ni@C as an anode catalyst featured an excellent maximum power density of 13.8 mW cm⁻² with 0.33 M urea solution in 1 M KOH as fuel and humidified air as oxidant at 50 °C, additionally showing excellent stability during continuous 20-h operation. Thus, this work showed that the highly porous carbon-supported Ni catalysts derived from Ni-based metal–organic framework can be used for urea oxidation and as an efficient anode material for urea fuel cells.

Ni-Co bimetal decorated carbon nanotube aerogel as an efficient anode catalyst in urea fuel cells

Ni-based catalysts have been considered as an efficient anode material for urea fuel cells due to the low cost and high activity in alkaline media. Herein, we demonstrate that Ni-Co bimetallic nanoparticles decorated carbon nanotube aerogels as catalysts for urea oxidation reaction (UOR) can be synthesized by a polyol reduction and sol-gel method. The morphology, structure, and composition of the Ni-Co/MWCNT aerogels were characterized by scanning electron microscopy and X-Ray diffraction. The electro-catalytic activity of the Ni-Co/MWCNT aerogels towards UOR was investigated using cyclic voltammetry. It was found that the Co-doping at 25% (Co/Ni) significantly increased the oxidation peak current and reduced the overpotential of the UOR. Furthermore, the MWCNT aerogel support also remarkably enhanced electro-catalytic activity by providing a high surface area and fast mass transport for the UOR owing to the porous 3D network structures with uniform distribution of Ni-Co nanoparticles. Urea/O₂ fuel cell with Ni-Co/MWCNT aerogel as anode material exhibited an excellent performance with maximum power density of 17.5 mWcm⁻² with an open circuit voltage of 0.9 V. Thus, this work showed that the highly porous three-dimensional Ni-Co/MWCNT aerogel catalysts can be used for urea oxidation and as an efficient anode material for urea fuel cells.

Recent Advances in the Electro-Oxidation of Urea for Direct Urea Fuel Cell and Urea Electrolysis

This paper provides an overview of recent advances in urea electro-oxidation. Urea sources are abundant from human urine, urea-containing wastewater, and industrial urea, thus becoming an attractive option as anodic fuel for the application in direct urea fuel cells (DUFCs). Besides, as a hydrogen-rich chemical fuel, urea can also be electrolyzed to produce hydrogen for energy storage in the near future. The exact mechanisms of urea decomposition are pretty different in alkaline or neutral mediums and are separately discussed in detail. More importantly, the development of anodic electro-catalysts is of great significance for improving the electrochemical performance of both DUFCs and urea electrolysis cells, which is systematically summarized in our review. Challenges and prospects on the future development of urea electro-oxidation are particularly proposed.

Influence of support material on the electrocatalytic activity of nickel oxide nanoparticles for urea electro-oxidation reaction

Nickel oxide nanoparticles were deposited on different carbon supports including activated Vulcan XC-72R carbon black (NiO/AC), multi-walled carbon nanotubes (NiO/MWCNTs), graphene (NiO/Gr) and graphite (NiO/Gt) through precipitation step followed by calcination at 400 °C. To determine the crystalline structure and morphology of prepared electrocatalysts, X-ray diffraction (XRD) and transmission electron microscopy (TEM) were employed. The electrocatalytic activity of NiO/carbon support electrocatalysts was investigated towards urea electro-oxidation reaction in NaOH solution using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Urea oxidation peak current density was increased in the following order: NiO/AC < NiO/MWCNTs < NiO/Gr < NiO/Gt. Chronoamperometry test also showed an increased steady state oxidation current density for NiO/Gt in comparison to other electrocatalysts. The increased activity and stability of NiO/Gt electrocatalyst encourage the application of graphite as an efficient and cost-saving support to carry metal nanoparticles for urea electro-oxidation reaction.

Two-dimensional metal–organic frameworks with high oxidation states for efficient electrocatalytic urea oxidation

A two-dimensional metal–organic framework comprising nickel species and an organic ligand of benzenedicarboxylic acid is fabricated and explored as an electrocatalyst for urea oxidation reaction.