Effect of pH and Water Structure on the Oxygen Reduction Reaction on platinum electrodes

Electrocatalysis: From Planar Surfaces to Nanostructured Interfaces

The reactions critical for the energy transition center on the chemistry of hydrogen, oxygen, carbon, and the heterogeneous catalyst surfaces that make up electrochemical energy conversion systems. Together, the surface-adsorbate interactions constitute the electrochemical interphase and define reaction kinetics of many clean energy technologies. Practical devices introduce high levels of complexity where surface roughness, structure, composition, and morphology combine with electrolyte, pH, diffusion, and system level limitations to challenge our ability to deconvolute underlying phenomena. To make significant strides in materials design, a structured approach based on well-defined surfaces is necessary to selectively control distinct parameters, while complexity is added sequentially through careful application of nanostructured surfaces. In this review, we cover advances made through this approach for key elements in the field, beginning with the simplest hydrogen oxidation and evolution reactions and concluding with more complex organic molecules. In each case, we offer a unique perspective on the contribution of well-defined systems to our understanding of electrochemical energy conversion technologies and how wider deployment can aid intelligent materials design.

Inhibition of inorganic chlorinated byproducts formation during electrooxidation treatment of saline phenolic wastewater via synergistic cathodic generation of H2O2

The electrochemical treatment of saline wastewater is prone to the formation of inorganic chlorinated byproducts, being a significant challenge for this technology. In this study, we introduce an electrooxidation system utilizing a self-supporting nitrogen-doped carbon-based cathode embedded in carbon cloth (N@C-CC), designed to generate H₂O₂. This system aims to rapidly neutralize free chlorine produced at the anode, a precursor to inorganic chlorinated byproducts, thereby reducing their formation. Our results demonstrate that using the N@C-CC cathode in saline wastewater treatment yielded considerably lower concentrations of ClO₃⁻ and ClO₄⁻ (0.08 mM and 0.024 mM, respectively), which were only 20.5% and 22.7% of the levels produced using a Pt cathode without H₂O₂ generation. Moreover, the presence of cathodically generated H₂O₂ that quenches free chlorine did not significantly impact the degradation performance of phenol. Electron paramagnetic resonance tests and quenching experiments indicated that 1O₂ was primarily responsible for phenol removal. Validation with real wastewater demonstrated reductions of 68.6% and 56.3% in ClO3- and ClO4- concentrations, respectively, while effectively removing other pollutants. This study thus offers a compelling method for mitigating the formation of inorganic chlorinated byproducts during the electrooxidation of saline wastewater.

Towards rational design in electrochemical denitrification by analyzing pH dependence

A small fraction of NOx (<1%) always exists in CO2 feedstock (e.g. exhausted gas), which can significantly reduce the efficiency of CO2 electroreduction by ∼30%. Hence, electrochemical denitrification is the precondition of CO2 electroreduction. The pH effect is a key factor, and can be used to tune the selectivity between N2 and N2O production in electrochemical denitrification. However, there has been much controversy for many years about the origin of pH dependence in electrocatalysis. To this end, we present a new scheme to accurately model the pH dependence of the electrochemical mechanism. An extremely small pH variation from pH 12.7 to pH 14 can be accurately reproduced for N2O production. More importantly, the obviously different pH dependence of N2 production, compared to N2O, can be attributed to a cascade path. In other words, the N2 was produced from the secondary conversion of the as-produced N2O molecule (the major product), instead of the original reactant NO. This is further supported by more than 35 experiments over varying catalysts (Fe, Ni, Pd, Cu, Co, Pt and Ag), partial pressures (20%, 50% and 100%) and potentials (from -0.2 to 0.2 V vs. reversible hydrogen electrode). All in all, the insights herein overturn long-lasting views in the field of NO electroreduction and suggest that rational design should steer away from catalyst engineering toward reactor optimization.

Boosting Oxygen Reduction at Pt(111)|Proton Exchange Ionomer Interfaces through Tuning the Microenvironment Water Activity

A proton exchange ionomer is one of the most important components in membrane electrode assemblies (MEAs) of polymer electrolyte membrane fuel cells (PEMFCs). It acts as both a proton conductor and a binder for nanocatalysts and carbon supports. The structure and the wetting conditions of the MEAs have a great impact on the microenvironment at the three-phase interphases in the MEAs, which can significantly influence the electrode kinetics such as the oxygen reduction reaction (ORR) at the cathode. Herein, by using the Pt(111)|X ionomer interface as a model system (X = Nafion, Aciplex, D72), we find that higher drying temperature lowers the onset potential for sulfonate adsorption and reduces apparent ORR current, while the current wave for OHad formation drops and shifts positively. Surprisingly, the intrinsic ORR activity is higher after properly correcting the blocking effect of Pt active sites by sulfonate adsorption and the poly(tetrafluoroethylene) (PTFE) skeleton. These results are well explained by the reduced water activity at the interfaces induced by the ionomer/PTFE, according to the mixed potential effect. Implications for how to prepare MEAs with improved ORR activity are provided.

The pH-Induced Increase of the Rate Constant for HER at Au(111) in Acid Revealed by Combining Experiments and Kinetic Simulation

Origins of pH effects on the kinetics of electrocatalytic reactions involving the transfer of both protons and electrons, including the hydrogen evolution reaction (HER) considered in this study, are heatedly debated. By taking the HER at Au(111) in acid solutions of different pHs and ionic concentrations as the model systems, herein, we report how to derive the intrinsic kinetic parameters of such reactions and their pH dependence through the measurement of j-E curves and the corresponding kinetic simulation based on the Frumkin-Butler-Volmer theory and the modified Poisson-Nernst-Planck equation. Our study reveals the following: (i) the same set of kinetic parameters, such as the standard activation Gibbs free energy, charge transfer coefficient, and Gibbs adsorption energy for Had at Au(111), can simulate well all the j-E curves measured in solutions with different pH and temperatures; (ii) on the reversible hydrogen electrode scale, the intrinsic rate constant increases with the increase of pH, which is in contrast with the decrease of the HER current with the increase of pH; and (iii) the ratio of the rate constants for HER at Au(111) in x M HClO4 + (0.1 - x) M NaClO4 (pH ≤ 3) deduced before properly correcting the electric double layer (EDL) effects to the ones estimated with EDL correction is in the range of ca. 10 to 40, and even in a solution of x M HClO4 + (1 - x) M NaClO4 (pH ≤ 2) there is a difference of ca. 5× in the rate constants without and with EDL correction. The importance of proper correction of the EDL effects as well as several other important factors on unveiling the intrinsic pH-dependent reaction kinetics are discussed to help converge our analysis of pH effects in electrocatalysis.

PtNi-W/C with Atomically Dispersed Tungsten Sites Toward Boosted ORR in Proton Exchange Membrane Fuel Cell Devices

The performance of proton exchange membrane fuel cells is heavily dependent on the microstructure of electrode catalyst especially at low catalyst loadings. This work shows a hybrid electrocatalyst consisting of PtNi-W alloy nanocrystals loaded on carbon surface with atomically dispersed W sites by a two-step straightforward method. Single-atomic W can be found on the carbon surface, which can form protonic acid sites and establish an extended proton transport network at the catalyst surface. When implemented in membrane electrode assembly as cathode at ultra-low loading of 0.05 mgPt cm-2, the peak power density of the cell is enhanced by 64.4% compared to that with the commercial Pt/C catalyst. The theoretical calculation suggests that the single-atomic W possesses a favorable energetics toward the formation of *OOH whereby the intermediates can be efficiently converted and further reduced to water, revealing a interfacial cascade catalysis facilitated by the single-atomic W. This work highlights a novel functional hybrid electrocatalyst design from the atomic level that enables to solve the bottle-neck issues at device level.

pH Effects in a Model Electrocatalytic Reaction Disentangled

Varying the solution pH not only changes the reactant concentrations in bulk solution but also the local reaction environment (LRE) that is shaped furthermore by macroscopic mass transport and microscopic electric double layer (EDL) effects. Understanding ubiquitous pH effects in electrocatalysis requires disentangling these interwoven factors, which is a difficult, if not impossible, task without physical modeling. Herein, we demonstrate how a hierarchical model that integrates microkinetics, double-layer charging, and macroscopic mass transport can help understand pH effects of the formic acid oxidation reaction (FAOR). In terms of the relation between the peak activity and the solution pH, intrinsic pH effects without consideration of changes in the LRE would lead to a bell-shaped curve with a peak at pH = 6. Adding only macroscopic mass transport, we can already reproduce qualitatively the experimentally observed trapezoidal shape with a plateau between pH 5 and 10 in perchlorate and sulfate solutions. A quantitative agreement with experimental data requires consideration of EDL effects beyond Frumkin correlations. Specifically, the peculiar nonmonotonic surface charging relation affects the free energies of adsorbed intermediates. We further discuss pH effects of FAOR in phosphate and chloride-containing solutions, for which anion adsorption becomes important. This study underpins the importance of a full consideration of multiple interrelated factors for the interpretation of pH effects in electrocatalysis.

Zooming into the Inner Helmholtz Plane of Pt(111)-Aqueous Solution Interfaces: Chemisorbed Water and Partially Charged Ions

The double layer on transition metals, i.e., platinum, features chemical metal-solvent interactions and partially charged chemisorbed ions. Chemically adsorbed solvent molecules and ions are situated closer to the metal surface than electrostatically adsorbed ions. This effect is described tersely by the concept of an inner Helmholtz plane (IHP) in classical double layer models. The IHP concept is extended here in three aspects. First, a refined statistical treatment of solvent (water) molecules considers a continuous spectrum of orientational polarizable states, rather than a few representative states, and non-electrostatic, chemical metal-solvent interactions. Second, chemisorbed ions are partially charged, rather than being electroneutral or having integral charges as in the solution bulk, with the coverage determined by a generalized, energetically distributed adsorption isotherm. The surface dipole moment induced by partially charged, chemisorbed ions is considered. Third, considering different locations and properties of chemisorbed ions and solvent molecules, the IHP is divided into two planes, namely, an AIP (adsorbed ion plane) and ASP (adsorbed solvent plane). The model is used to study how the partially charged AIP and polarizable ASP lead to intriguing double-layer capacitance curves that are different from what the conventional Gouy-Chapman-Stern model describes. The model provides an alternative interpretation for recent capacitance data of Pt(111)-aqueous solution interfaces calculated from cyclic voltammetry. This revisit brings forth questions regarding the existence of a pure double-layer region at realistic Pt(111). The implications, limitations, and possible experimental confirmation of the present model are discussed.

Inverse kinetic isotope effects in the oxygen reduction reaction at platinum single crystals

Although the oxygen reduction reaction (ORR) involves multiple proton-coupled electron transfer processes, early studies reported the absence of kinetic isotope effects (KIEs) on polycrystalline platinum, probably due to the use of unpurified D₂O. Here we developed a methodology to prepare ultra-pure D₂O, which is indispensable for reliably investigating extremely surface-sensitive platinum single crystals. We find that Pt(111) exhibits much higher ORR activity in D₂O than in H₂O, with potential-dependent inverse KIEs of ~0.5, whereas Pt(100) and Pt(110) exhibit potential-independent inverse KIEs of ~0.8. Such inverse KIEs are closely correlated to the lower *OD coverage and weakened *OD binding strength relative to *OH, which, based on theoretical calculations, are attributed to the differences in their zero-point energies. This study suggests that the competing adsorption between *OH/*OD and *O₂ probably plays an important role in the ORR rate-determining steps that involve a chemical step preceding an electrochemical step (CE mechanism).

Optimal Pt-Au Alloying for Efficient and Stable Oxygen Reduction Reaction Catalysts

Stabilization of cathode catalysts in hydrogen-fueled proton-exchange membrane fuel cells (PEMFCs) is paramount to their widespread commercialization. Targeting that aim, Pt-Au alloy catalysts with various compositions (Pt₉₅Au₅, Pt₉₀Au₁₀, and Pt₈₀Au₂₀) prepared by magnetron sputtering were investigated. The promising stability improvement of the Pt-Au catalyst, manifested in suppressed platinum dissolution with increasing Au content, was documented over an extended potential range up to 1.5 V_RHE. On the other hand, at elevated concentrations, Au showed a detrimental effect on oxygen reduction reaction activity. A systematic study involving complementary characterization techniques, electrochemistry, and Monte Carlo simulations based on density functional theory data enabled us to gain a comprehensive understanding of the composition-activity-stability relationship to find optimal Pt-Au alloying for maintaining the activity of platinum and improving its resistance to dissolution. According to the results, Pt-Au alloy with 10% gold represent the most promising composition retaining the activity of monometallic Pt while suppressing Pt dissolution by 50% at the upper potential limit of 1.2 V_RHE and by 20% at devastating 1.5 V_RHE.

Determining the hydronium pK[Formula: see text] at platinum surfaces and the effect on pH-dependent hydrogen evolution reaction kinetics

Electrocatalytic hydrogen evolution reaction (HER) is critical for green hydrogen generation and exhibits distinct pH-dependent kinetics that have been elusive to understand. A molecular-level understanding of the electrochemical interfaces is essential for developing more efficient electrochemical processes. Here we exploit an exclusively surface-specific electrical transport spectroscopy (ETS) approach to probe the Pt-surface water protonation status and experimentally determine the surface hydronium pKa [Formula: see text] 4.3. Quantum mechanics (QM) and reactive dynamics using a reactive force field (ReaxFF) molecular dynamics (RMD) calculations confirm the enrichment of hydroniums (H3O[Formula: see text]) near Pt surface and predict a surface hydronium pKa of 2.5 to 4.4, corroborating the experimental results. Importantly, the observed Pt-surface hydronium pKa correlates well with the pH-dependent HER kinetics, with the protonated surface state at lower pH favoring fast Tafel kinetics with a Tafel slope of 30 mV per decade and the deprotonated surface state at higher pH following Volmer-step limited kinetics with a much higher Tafel slope of 120 mV per decade, offering a robust and precise interpretation of the pH-dependent HER kinetics. These insights may help design improved electrocatalysts for renewable energy conversion.

Electrochemical removal and recovery of uranium: Effects of operation conditions, mechanisms, and implications

Removing and recovering uranium (U) from U-mining wastewater would be appealing, which simultaneously reduces the adverse environmental impact of U mining activities and mitigates the depletion of conventional U resources. In this study, we demonstrate the application of a constant-voltage electrochemical (CVE) method for the removal and recovery of U from U-mining wastewater, in an ambient atmosphere. The effects of operation conditions were elucidated in synthetic U-bearing water experiments, and the cell voltage and the ionic strength were found to play important roles in both the U extraction kinetics and the operation cost. The mechanistic studies show that, in synthetic U-bearing water, the CVE U extraction proceeds exclusively via a single-step one-electron reduction mechanism, where pentavalent U is the end product. In real U-mining wastewater, the interference of water matrices led to the disproportionation of the pentavalent U, resulting in the formation of tetravalent and hexavalent U in the extraction products. The U extraction efficacy of the CVE method was evaluated in real U-mining wastewater, and results show that the CVE U extraction method can be efficient with operation costs ranging from $0.55/kgU ~ $64.65/kgU, with varying cell voltages from 1.0 V to 4.0 V, implying its feasibility from the economic perspective.

Three-Phases Interface Induced Local Alkalinity Generation Enables Electrocatalytic Glucose Oxidation in Neutral Electrolyte

Electrocatalytic glucose oxidation is crucial to the development of non-enzymatic sensors, an attractive alternative for enzymatic biosensors. However, due to OH^- consumption during the catalytic process, non-enzymatic detection generally requires electrolytes having an alkaline pH value, limiting its practical application since biofluids are neutral. Herein, via interfacial microenvironment design, we addressed this limitation by developing a non-enzymatic sensor with an air-solid-liquid triphase interface electrodes that synergistically integrates the functions of local alkalinity generation and electrocatalytic glucose oxidation. A sufficiently high local pH value was achieved via oxygen reduction reaction at the triphase interface, which consequently enabled the electrochemical oxidation (detection) of glucose in neutral solution. Moreover, we found that the linear detection range and sensitivity of triphase non-enzymatic sensor can be tuned by changing the electrocatalysts of the detection electrode. The triphase electrode architecture provides a new platform for further exploration and promotes practical application of non-enzymatic sensors.

Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

Plasmonic Core-Shell Nanomaterials and their Applications in Spectroscopies

Plasmonic core-shell nanostructures have attracted considerable attention in the scientific community recently due to their highly tunable optical properties. Plasmon-enhanced spectroscopies are one of the main applications of plasmonic nanomaterials. When excited by an incident laser of suitable wavelength, strong and highly localized electromagnetic (EM) fields are generated around plasmonic nanomaterials, which can significantly boost excitation and/or radiation processes that amplify Raman, fluorescence, or nonlinear signals and improve spectroscopic sensitivity. Herein, recent developments in plasmon-enhanced spectroscopies utilizing core-shell nanostructures are reviewed, including shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), plasmon-enhanced fluorescence spectroscopy, and plasmon-enhanced nonlinear spectroscopy.

A density functional theory (DFT) study on reduced partition function ratios of oxygen species adsorbed on a Pt19 cluster and oxygen isotope effects

A density functional theory (DFT) computation on oxygen species adsorbed on platinum (Pt) catalyst surfaces has been carried out to elucidate oxygen isotope fractionation observed at the cathode of a polymer electrolyte membrane fuel cell (PEMFC). The Pt(111) catalyst surface was modelled by a Pt₁₉ cluster, and O, OH, OHH, OO, OOH, OHOH and HOHOH were assumed to be the oxygen species adsorbed on the Pt(111) surface. The oxygen isotope reduced partition function ratios (RPFRs) of the adsorbed species were calculated using the vibrational frequencies obtained by normal mode analyses performed on the optimized structures. Various oxygen isotope exchange equilibria among the adsorbed oxygen species and oxygen and water molecules in the gas phase were examined using their RPFRs. Experimental observation that the lighter ¹⁶O is enriched in water molecules exhausted from the cathode is explainable in a satisfactory manner by assuming oxygen isotope exchange equilibria of O₂ molecule with O, OH, OO and OOH adsorbed on the Pt(111) surface that appear in the first half of the conversion reaction from O₂ to H₂O and those of H₂O molecule with the adsorbed oxygen species, OHH, OHOH and HOHOH, formed in the latter half of the conversion reaction.

Cation Effects on Interfacial Water Structure and Hydrogen Peroxide Reduction on Pt(111)

The interface between the Pt(111) surface and several MeF/HClO₄ (Me⁺ = Li⁺, Na⁺, or Cs⁺) aqueous electrolytes is investigated by means of cyclic voltammetry and laser-induced temperature jump experiments. Results point out that the effect of the electrolyte on the interfacial water structure is different depending on the nature of the metal alkali cation, with the values of the potential of maximum entropy (pme) following the order pme (Li⁺) < pme (Na⁺) < pme (Cs⁺). In addition, the hydrogen peroxide reduction reaction is studied under these conditions. This reaction is inhibited at low potentials as a consequence of the build up of negative charges on the electrode surface. The potential where this inhibition takes place (E _inhibition) follows the same trend as the pme. These results evidence that the activity of an electrocatalytic reaction can depend to great extent on the structure of the interfacial water adlayer and that the latter can be modulated by the nature of the alkali metal cation.

Interfacial processes in electrochemical energy systems

Electrochemical energy systems such as batteries, water electrolyzers, and fuel cells are considered as promising and sustainable energy storage and conversion devices due to their high energy densities and zero or negative carbon dioxide emission. However, their widespread applications are hindered by many technical challenges, such as the low efficiency and poor long-term cyclability, which are mostly affected by the changes at the reactant/electrode/electrolyte interfaces. These interfacial processes involve ion/electron transfer, molecular/ion adsorption/desorption, and complex interface restructuring, which lead to irreversible modifications to the electrodes and the electrolyte. The understanding of these interfacial processes is thus crucial to provide strategies for solving those problems. In this review, we will discuss different interfacial processes at three representative interfaces, namely, solid-gas, solid-liquid, and solid-solid, in various electrochemical energy systems, and how they could influence the performance of electrochemical systems.

Modelling electrocatalytic reactions with a concerted treatment of multistep electron transfer kinetics and local reaction conditions

A physicochemical model is developed for electrocatalytic reactions involving multiple electron transfer steps occurring in the electric double layer (EDL). The local reaction conditions are calculated using a mean-field EDL model, which is derived from a comprehensive grand potential that considers the steric effects, solvent polarization, and chemisorption-induced surface dipoles. Macroscopic mass transport in the so-called diffusion layer is controlled by the same set of controlling equations of the EDL model, without imposing the electroneutrality assumption as usual. The Gerischer's formulation of electron transfer theory, corrected with local reaction conditions, is used to describe the kinetics of elementary steps. Multistep kinetics of the electrocatalytic reaction is treated using microkinetics modelling, without resorting to the usual rate-determining step approximation. In formal analysis of the model, we retrieve canonical models with additional assumptions. Self-consistent numerical implementation of the model is demonstrated for oxygen reduction reaction (ORR) at Pt(111) in acidic solution, and the aptness of the model is verified by comparison with experimental data. A comparative study of the full model and its simplified versions allows us to examine how the ORR is influenced by asymmetric steric effects, finite concentration of ions, solvent polarization, surface charge effects, and metal electronic structure effects. We find that the difference in terms of the overpotential between the full model and the simplest model can be up to ∼0.1 V at a current density of -6 mAcm-2.

Novel recognition mechanism based on oxidative addition of Pt(II) complex-based luminescent probes for hypochlorite ion detection

Platinum(II) complexes are the most commonly used anticancer drugs and potential optical materials, but the detectability of Pt(II) complex-based probes is seldom reported. In our previous work, a tetradentate Pt(II) complex Pt-CHO was utilised as a 'turn-off' probe to detect ClO^- and image cancer cells. However, the recognition mechanism has not been completely clarified and there are still doubts. In this work, three Pt(II) complexes, Pt-H, Pt-CHO and Pt-COOH, were developed to elucidate the mechanism of this class of complexes and refine their property studies. As a result, the UV-visible absorption and luminescence emission experiments, as well as the mass spectrum, proved that the oxidation of Pt(II) to Pt(IV) was the real reason for luminescence quenching, which has nothing to do with aldehyde groups. This first reported mechanism introduces a new type of ClO^- probe based on Pt(II) complexes, thereby expanding the application fields of platinum complexes. Moreover, the quantum yield measurements, the effect of biomolecules and reversibility were studied to improve the properties of the probes. Theoretical calculations were used to gain an in-depth understanding of optical characteristics and related mechanisms. The cell imaging of RAW264.7 cells under endogenous ClO^- proved the potential of the probes in bioimaging.

Spotlight on the Effect of Electrolyte Composition on the Potential of Maximum Entropy: Supporting Electrolytes Are Not Always Inert

The influence of electrolyte pH, the presence of alkali metal cations (Na+ , K+ ), and the presence of O2 on the interfacial water structure of polycrystalline gold electrodes has been experimentally studied in detail. The potential of maximum entropy (PME) was determined by the laser-induced current transient (LICT) technique. Our results demonstrate that increasing the electrolyte pH and introducing O2 shift the PME to more positive potentials. Interestingly, the PME exhibits a higher sensitivity to the pH change in the presence of K+ than Na+ . Altering the pH of the K2 SO4 solution from 4 to 6 can cause a drastic shift in the PME. These findings reveal that, for example, K2 SO4 and Na2 SO4 cannot be considered as equal supporting electrolytes: it is not a viable assumption. This can likely be extrapolated to other common "inert" supporting electrolytes. Beyond this, knowledge about the near-ideal electrolyte composition can be used to optimize electrochemical devices such as electrolyzers, fuel cells, batteries, and supercapacitors.

Detection of Superoxide Anion Oxygen Reduction Reaction Intermediate on Pt(111) by Infrared Reflection Absorption Spectroscopy in Neutral pH Conditions

In this work, in situ external infrared reflection absorption spectroscopy (IRRAS) is successfully employed for the detection of intermediate species in the oxygen reduction reaction (ORR) mechanism on a flat and well-defined Pt surface. Superoxide anion species (O2-) are detected on the Pt(111) surface in an O2-saturated solution with a NaF/HClO4 mixture with pH 5.5 by the observation of a O-O vibration band at ca. 1080 cm-1. The observation of O2- without the use of any other additional method of signal enhancement is possible because in these experimental conditions O2- is the main ORR-generated intermediate and its reactivity is limited in this pH. This leads to the accumulation of O2- near the Pt surface, facilitating its identification.

How Buffers Resist Electrochemical Reaction-Induced pH Shift under a Rotating Disk Electrode Configuration

In mild acidic or alkaline solutions with limited buffer capacity, the pH at the electrode/electrolyte interface (pH^s) may change significantly when the supply of H⁺ (or OH^-) is slower than its consumption or production by the electrode reaction. Buffer pairs are usually applied to resist the change of pH^s during the electrochemical reaction. In this work, by taking H₂X ⇄ 2H⁺ + X + 2e^- under a rotating disk electrode configuration as a model reaction, numerical simulations are carried out to figure out how pH^s changes with the reaction rate in solutions of different bulk pHs (pH^b in the range from 0 to 14) and in the presence of buffer pairs with different pK_a values and concentrations. The quantitative relation of pH^s, pH^b, pK_a, and concentration of buffer pairs as well as of the reaction current density is established. Diagrams of pH^s and ΔpH (ΔpH = pH^s - pH^b) as a function of pH^b and the reaction current density as well as of the j_max-pH^b plots are provided, where j_max is defined as the maximum allowable current density within the acceptable tolerance of deviation of pH^s from that of pH^b (e.g., ΔpH < 0.2). The j-pH^s diagrams allow one to estimate the pH^s and ΔpH without direct measurement. The j_max-pH^b plots may serve as a guideline for choosing buffer pairs with appropriate pK_a and concentration to mitigate the pH^s shift induced by electrode reactions.

Comparing electrocatalytic and thermocatalytic conversion of nitrate on platinum–ruthenium alloys

Comparison between thermocatalytic and electrocatalytic nitrate reduction reactions highlights mechanistic similarities and differences between the two reactions.

Oxygen Reduction Reaction on Au Revisited at Different pH Values using in situ Surface-Enhanced Raman Spectroscopy

The mechanisms of the oxygen reduction reaction (ORR) on Au surfaces are revisited in electrolytes with different pH values by using a combination of electrochemical and in situ surface-enhanced Raman scattering spectroscopy. Surprisingly, the in situ Raman signal of the O-O stretching vibration was detected during the ORR on a Au surface by using a λ=785 nm laser. Both the intermediate products O₂ ^- and H₂ O₂ could be detected, which indicates the difficulty of the further reduction H₂ O₂ and results in a lower electron transfer number, especially in neutral and acid electrolytes. The weak absorption ability of HO₂ on the Au surface may explain the poor ORR in neutral and acid electrolytes. This work not only provides a deep insight to understand the reduction mechanisms of O₂ on Au in electrolytes with different pH values but also supplies a new idea for the selection and optimization of electrolytes and efficient electrocatalysts for oxygen reduction.

Structure effects on electrocatalysts. Oxygen reduction on Te-modified Pt(111) surfaces: Site-blocking vs electronic effects

In this work, the oxygen reduction reaction (ORR) on tellurium-modified Pt(111) surfaces has been studied. Adsorption of Te adatoms on Pt(111) progressively shifts toward less positive values of both the ORR reaction onset and the half-wave potential in 0.1M HClO₄ for 0 < θ_Te < 0.25. However, at θ_Te > 0.25, the ORR activity increases relative to the one at θ_Te < 0.25, but remains lower than that on clean Pt(111). Results were analyzed in light of simulations of kinetic currents as a function of θ_Te, calculated by employing a simple mean field model including both site blocking and electronic effects. Inside this framework, experimental data are best explained by considering that oxygenated Te species inhibit the ORR by either negatively modifying adsorption energies of reaction intermediates or combined site-blocking and electronic effects. A redox ORR catalysis due to redox properties of Te adatoms is discarded. Contrarily, in 0.05M H₂SO₄, a positive catalytic effect has been found, interpreted in terms of a competitive adsorption-desorption mechanism involving the replacement of adsorbed sulfate by Te adatoms. On the other hand, despite the strong site-blocking effect on H_ads and OH_ads adsorption by Te adatoms, it appears that the reduced Te-Pt(111) adlayer does not inhibit the reaction, suggesting different active sites for H_ads and OH_ads adsorption and for the rate-determining step of the ORR mechanism.

Interface Properties of the Partially Oxidized Pt(111) Surface Using Hybrid DFT-Solvation Models

This article reports a theoretical-computational effort to model the interface between an oxidized platinum surface and aqueous electrolyte. It strives to account for the impact of the electrode potential, formation of surface-bound oxygen species, orientational ordering of near-surface solvent molecules, and metal surface charging on the potential profile along the normal direction. The computational scheme is based on the DFT/ESM-RISM method to simulate the charged Pt(111) surface with varying number of oxygen adatoms in acidic solution. This hybrid solvation method is known to qualitatively reproduce bulk metal properties like the work function. However, the presented calculations reveal that vital interface properties such as the electrostatic potential at the outer Helmholtz plane are highly sensitive to the position of the metal surface slab relative to the DFT-RISM boundary region. Shifting the relative position of the slab also affects the free energy of the system. It follows that there is an optimal distance for the first solvent layer within the ESM-RISM framework, which could be found by optimizing the position of the frozen Pt(111) slab. As it stands, manual sampling of the position of the slab is impractical and betrays the self-consistency of the method. Based on this understanding, we propose the implementation of a free energy optimization scheme of the relative position of the slab in the DFT-RISM boundary region. This optimization scheme could considerably increase the applicability of the hybrid method.

Dissolution of Platinum Single Crystals in Acidic Medium

Platinum single crystal basal planes consisting of Pt(111), Pt(100), Pt(110) and reference polycrystalline platinum Pt(poly) were subjected to various potentiodynamic and potentiostatic electrochemical treatments in 0.1 M HClO4 . Using the scanning flow cell coupled to an inductively coupled plasma mass spectrometer (SFC-ICP-MS) the transient dissolution was detected on-line. Clear trends in dissolution onset potentials and quantities emerged which can be related to the differences in the crystal plane surface structure energies and coordination. Pt(111) is observed to have a higher dissolution onset potential while the generalized trend in dissolution rates and quantities was found to be Pt(110)>P(100)≈Pt(poly)>Pt(111).

Controlling the mixed potential of polyelectrolyte-coated platinum electrodes for the potentiometric detection of hydrogen peroxide

The use of a Pt electrode coated with a layer of Nafion has been described in previous works as an attractive way to perform the potentiometric detection of hydrogen peroxide. Despite of the attractive features of this approach, the nature of the non-Nernstian response of this system was not properly addressed. In this work, using a mixed potential model, the open circuit potential of the Pt electrode is shown to be under kinetic control of the oxygen reduction reaction (ORR). It is proposed that hydrogen peroxide acts as an oxygenated species that blocks free sites on the Pt surface, interfering with the ORR. Therefore, the effect of the polyelectrolyte coating can be understood in terms of the modulation of the factors that affects the kinetics of the ORR, such as an increase of the H⁺ concentration, minimization of the effect of the spectator species, etc. Because of the complexity and the lack of models that accurately describe systems with practical applications, this work is not intended to provide a mechanistic but rather a phenomenological view on problem. A general framework to understand the factors that affect the potentiometric response is provided. Experimental evidence showing that the use of polyelectrolyte coatings are a powerful way to control the mixed potential open new ways for the development of robust and simple potentiometric sensors.

Effects of the Interfacial Structure on the Methanol Oxidation on Platinum Single Crystal Electrodes

Methanol oxidation has been studied on low index platinum single crystal electrodes using methanol solutions with different pH (1–5) in the absence of specific adsorption. The goal is to determine the role of the interfacial structure in the reaction. The comparison between the voltammetric profiles obtained in the presence and absence of methanol indicates that methanol oxidation is only taking place when the surface is partially covered by adsorbed OH. Thus, on the Pt(111) electrode, the onset for the direct oxidation of methanol and the adsorption of OH coincide. In this case, the adsorbed OH species are not a mere spectator, because the obtained results for the reaction order for methanol and the proton concentrations indicate that OH adsorbed species are involved in the reaction mechanism. On the other hand, the dehydrogenation step to yield adsorbed CO on the Pt(100) surface coincides with the onset of OH adsorption on this electrode. It is proposed that adsorbed OH collaborates in the dehydrogenation step during methanol oxidation, facilitating either the adsorption of the methanol in the right configuration or the cleavage of the C—H bond.