Electrochemical reduced graphene oxide-polyaniline as effective nanocomposite film for high-performance supercapacitor applications

Label-free electrochemical immunoassay for ultra-sensitive detection of PSA utilizing gold nanoparticles/polyhedral hollow CoCu bimetallic sulfide nanostructure as a dual signal amplification platform

This study introduces the development of a highly sensitive label-free electrochemical immunosensor specifically designed to detect prostate-specific antigen (PSA). A glassy carbon electrode (GCE) coated with Au nanoparticles/polyhedral hollow CoCu bimetallic sulfide (CuCo2S4) was employed as a sensing interface for the fixation of the monoclonal anti-PSA antibody. The nanoarchitectures enhanced the capacity for loading prostate-specific antibodies (Ab) and effectually boosted electrical conductivity leading to enhance the electrochemical signal and greater sensitivity for the detection of PSA. The electrochemical behavior of the engineered sensor was researched via cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The response of the fabricated immunosensor manifested a linearized correlation with PSA concentration, spanning from 50.0 fg/ml to 500.0 ng/ml, with a minimal detection limit (DPV: 19.0 fg/ml, EIS: 14.0 fg/ml) and superior stability. The morphological and structural features of the engineered nanomaterials were analyzed using a range of techniques, including field emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The proposed immunosensor was utilized for the meticulous and ultra-sensitive analysis of PSA levels in serum specimens, providing results that align satisfactorily with those from the enzyme-linked immunosorbent assay (ELISA) the benchmark protocol. In conclusion, these outcomes underscore the potential utility of the developed immunosensor for prostate cancer screening in its initial stages.

Disposable electrochemical sensors based on reduced graphene oxide/polyaniline/poly(alizarin red S)-modified integrated carbon electrodes for the detection of ciprofloxacin in milk

An electrochemical sensor based on an electroactive nanocomposite was designed for the first time consisting of electrochemically reduced graphene oxide (ERGO), polyaniline (PANI), and poly(alizarin red S) (PARS) for ciprofloxacin (CIPF) detection. The ERGO/PANI/PARS-modified screen-printed carbon electrode (SPCE) was constructed through a three-step electrochemical protocol and characterized using FTIR, UV-visible spectroscopy, FESEM, CV, LSV, and EIS. The new electrochemical CIPF sensor demonstrated a low detection limit of 0.0021 μM, a broad linear range of 0.01 to 69.8 μM, a high sensitivity of 5.09 μA/μM/cm2, and reasonable selectivity and reproducibility. Moreover, the ERGO/PANI/PARS/SPCE was successfully utilized to determine CIPF in milk with good recoveries and relative standard deviation (< 5%), which were close to those with HPLC analysis.

Fabrication of Ni-Polyaniline/Graphene Oxide Composite Electrode with High Capacitance and Water Splitting Activity

The Ni-PANI@GO composite electrode was fabricated via cost effective electrodeposition technique. According to the XRD, FTIR, Raman, SEM, and XPS analyses revealed that the nickel doped PANI@GO composite has been fabricated on the surface of the nickel foam. Addition of nickel significantly enhanced interaction between graphene with PANI leading to higher degree of polyaniline doping though imine groups. Electrochemical investigation revelated the significant performance of the Ni-PANI@GO composite electrode, boosting an impressive capacitance of 4480 F/g at 40 A/g, surpassing previous Ni-foam-based binder-free electrodes. Notably, Ni-PANI@GO electrode displayed excellent catalytic activity in both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), generating a considerable volume of the gas bubbles at relatively modest overpotentials of 279 mV and 244 mV respectively. This event allows for the achievement of 20 mA cm-2 current density. Furthermore, in the laboratory-scale water electrolyzer, a low cell voltage of 1.72 V was achieved, facilitating a water-splitting current density of 20 mA cm-2. This study underscores the premising potential for the real-world device's application of the versatile Ni-PANI@GO composite electrode.

Hybrid Nanocomposites Based on Poly(3,6-dianiline-2,5-dichloro-1,4-benzoquinone): Synthesis, Structure and Properties

Hybrid nanocomposites based on poly(3,6-dianiline-2,5-dichloro-1,4-benzoquinone) (PDACB) in salt form and graphene oxide (GO) have been obtained for the first time, and the significant influence of the preparation method on the composition and structure of nanocomposites and their functional properties has been demonstrated. Nanocomposites were prepared in three ways: via ultrasonic mixing of PDACB and GO; via in situ oxidative polymerization of 3,6-dianiline-2,5-dichloro-1,4-benzoquinone (DACB) in the presence of GO; and by heating a suspension of previously prepared PDACB and GO in DMF with the removal of the solvent. The results of the study of the composition, chemical structure, morphology, thermal stability and electrical properties of nanocomposites obtained via various methods are presented. Nanocomposites obtained by mixing the components in an ultrasonic field demonstrated strong intermolecular interactions between PDACB and GO both due to the formation of hydrogen bonds and π-stacking, as well as through electrostatic interactions. Under oxidative polymerization of DACB in the presence of GO, the latter participated in the oxidative process, being partially reduced. At the same time, a PDACB polymer film was formed on the surface of the GO. Prolonged heating for 4 h at 85 °C of a suspension of PDACB and GO in DMF led to the dedoping of PDACB with the transition of the polymer to the base non-conductive form and the reduction of GO. Regardless of the preparation method, all nanocomposites showed an increase in thermal stability compared to PDACB. All nanocomposites were characterized by a hopping mechanism of conductivity. Direct current (dc) conductivity σdc values varied within two orders of magnitude depending on the preparation conditions.

Modelling and optimising the performance of graphene oxide-Cu2SnS3-polyaniline nanocomposite as an adsorbent for mercury ion removal

Finding a cost-effective, efficient, and environmentally friendly technique for the removal of mercury ion (Hg2+) in water and wastewater can be a challenging task. This paper presents a novel and efficient adsorbent known as the graphene oxide-Cu2SnS3-polyaniline (GO-CTS-PANI) nanocomposite, which was synthesised and utilised to eliminate Hg2+ from water samples. The soft-soft interaction between Hg2+ and sulphur atoms besides chelating interaction between -N and Hg2+ is the main mechanism for Hg2+ adsorption onto the GO-CTS-PANI adsorbent. Various characterisation techniques, including Fourier transform infrared spectrophotometry (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), elemental mapping analysis, and X-ray diffraction analysis (XRD), were employed to analyse the adsorbent. The Box-Behnken method, utilising Design Expert Version 7.0.0, was employed to optimise the crucial factors influencing the adsorption process, such as pH, adsorbent quantity, and contact time. The results indicated that the most efficient adsorption occurred at pH 6.5, with 12 mg of GO-CTS-PANI adsorbent, and 30-min contact time that results in a maximum removal rate of 95% for 50 mg/L Hg2+ ions. The study also investigated the isotherm and kinetics of the adsorption process that the adsorption of Hg2+ onto the adsorbent happened in sequential layers (Freundlich isotherm) and followed by the pseudo-second-order kinetic model. Furthermore, response surface methodology (RSM) analysis indicates that pH is the most influential parameter in enhancing adsorption efficiency. In addition to traditional models, this study employed some artificial intelligence (AI) methods including the Random Forest algorithm to enhance the prediction of adsorption process efficiency. The findings demonstrated that the Random Forest algorithm exhibited high accuracy with a correlation coefficient of 0.98 between actual and predicted adsorption rates. This study highlights the potential of the GO-CTS-PANI nanocomposite for effectively removing of Hg2+ ions from water resources.

Porous carbohydrate-graphene aerogels synthesized by green method as electroactive supercapacitor materials

Various graphene derivatives have been known as electrode-active materials for fabricating supercapacitors. Interconnected graphene networks with adjustable porous structures, i.e., 3D graphene aerogels (GAs), can control the restacking of graphene sheets very well and, thus, lead to the enhanced performance supercapacitors. In this study, carbohydrates (sucrose and fructose) were used to make two types of 3D porous carbohydrates-graphene aerogels, sucrose-graphene aerogel (SCR) and fructose-graphene aerogel (FRC). Carbohydrates operate as a cross-linking and reductant agent. Voltammograms of supercapacitor electrodes based on the FRC and SCR indicate a more rectangular shape with a larger area and a superior current than the GA (graphene aerogel without using carbohydrates) electrode. They have better capacitive performance, more electron transportation ability, and higher specific capacitance (CS) values than GA. The supercapacitor electrodes based on FRC, SCR, and GA demonstrate the CS values of 257.2 F g -1, 221.0 F g -1, and 95 F g -1 at ѵ = 10 mV.s-1, respectively. Improvement in the performance of SCR and FRC supercapacitor electrodes, in comparison to GA, is attributed to the porous interconnected feature of their structures and their suitable available surface area, which facilitates electron and ion transportation throughout graphene networks. These supercapacitors also show excellent stability after recording 5000 consecutive voltammograms.

MXene (Ti3C2Tx)/cellulose nanofiber/polyaniline film as a highly conductive and flexible electrode material for supercapacitors

In recent years, supercapacitors based on cellulose nanofiber (CNF) films have received considerable attention for their excellent flexibility, lightweight, and unique structure. In this study, MXene (Ti₃C₂T_x) /CNF/polyaniline (PANI) hybrid films with good conductivity and flexibility were prepared by a convenient vacuum filtration method. Combined with PANI, MXene creates an open structure with high conductivity, which facilitates ion and electron transport among the materials and provides the composite with high electrochemical activity. The MXene/CNF/PANI electrode presents a high areal specific capacitance of 2935 mF cm^-2 at the current density of 1 mA cm^-2, excellent cycling stability with high capacitance retention of 94 % after 2000 cycles at 10 mA cm^-2 and high electrical conductivity (634.4 S∙cm^-1). As a further application of this film, it is used as a free-standing electrode to fabricate a quasi-solid-state supercapacitor with high performance, which has an ultra-thin thickness of 0.344 mm, a significantly high areal specific capacitance (522 mF cm^-2) at 5 mA cm^-2, a high areal energy density of 94.7 μWh∙cm^-2 and a high areal power density of 573 μW∙cm^-2. This work shows the great potential of the developed high-performance and flexible cellulose-based composites for fabricating electrodes as well as supercapacitors.

Self-Assembly of Hausmannite Mn3O4 Triangular Structures on Cocosin Protein Scaffolds for High Energy Density Symmetric Supercapacitor Application

Recent advances in using biological scaffolds for nanoparticle synthesis have proven to be useful for preparing various nanostructures with uniform shape and size. Proteins are significant scaffolds for generating various nanostructures partly because of the presence of many functional groups to recognize different chemistries. In this endeavor, cocosin protein, an 11S allergen, is prepared from coconut fruit and employed as a potential scaffold for synthesizing Mn₃O₄ materials. The interaction between protein and manganese ions is studied in detail through isothermal calorimetric titration. At increased scaffold availability, the Mn₃O₄ material adopts the exact hexamer structure of the cocosin protein. The electrochemical supercapacitive properties of the cocosin-Mn₃O₄ material are found to have a high specific capacitance of 751.3 F g^-1 at 1 A g^-1 with cyclic stability (92% of capacitance retention after 5000 CV cycles) in a three-electrode configuration. The Mn₃O₄//Mn₃O₄ symmetric supercapacitor device delivers a specific capacitance of 203.8 F g^-1 at 1 A g^-1 and an outstanding energy and power density of 91.7 W h kg^-1 and 899.5 W kg^-1, respectively. These results show that cocosin-Mn₃O₄ could be considered a suitable electrode for energy storage applications. Moreover, the cocosin protein to be utilized as a novel scaffold in protein-nanomaterial chemistry could be useful for protein-assisted inorganic nanostructure synthesis in the future.

Structure-dependent electrochemical properties of cobalt (II) carbonate hydroxide nanocrystals in supercapacitors

In this work, we report the structure-dependent electrochemical performance of cobalt carbonate hydroxide (Co₂(OH)₂CO₃) nanocrystals by experimental investigation and theoretical simulation. Different Co₂(OH)₂CO₃ nanostructures including two-dimensional (2D) nanosheets (NSs) and one-dimensional (1D) nanowires (NWs), were synthesized on self-supported carbon cloth substrates by a facile hydrothermal method. Compared to 1D NWs, 2D Co₂(OH)₂CO₃ NSs provided a short ion transfer path, and low electron transfer resistance during the electrochemical reaction. At the current density of 2 mA cm^-2, 2D Co₂(OH)₂CO₃ NSs exhibited a higher area capacitance of 2.15F cm^-2 and better cycling performance (96.2% retention after 10,000 cycles) than that of 1D NWs (1.15F cm^-2 and 90.1% retention). First-principles density functional theory (DFT) calculations revealed that the band gap of the (120) facet in 2D NSs was 0.2 eV, far less than of the (200) facet in 1D NWs (1.04 eV). Electrochemical impedance spectroscopy (EIS) measurements further indicated that the electron transfer and reaction kinetics were more efficient in 2D NSs. This work can provide an important insight in understanding the mechanism of electrochemical energy storage.

Electrochemical approach toward reduced graphene oxide-based electrodes for environmental applications: A review

Graphene has shown great potential in various application fields due to its excellent carrier transportation, ultra-high specific surface area, good mechanical properties, and light transmittance. However, pure graphene still exhibits some insurmountable defects, such as difficulty in simple and large-scale preparation, and limitations in application. The electrochemical method is a simple, clean, and environmentally friendly method. The rapid and simple preparation of graphene and its derivatives by electrochemical methods has important environmental significance. Moreover, rGO-based nanohybrids can be prepared by convenient and quick electrodeposition or cyclic voltammetry (CV), or to change the morphology and structure of graphene and its derivatives to achieve the purpose of improving material properties. This work mainly summarizes electrochemically related graphene from four aspects: (i) the method of electrochemical exfoliation of graphene; (ii) types of electrodeposition rGO-based nanohybrids; (iii) electrochemical regulation of the structure of rGO-based mixtures; (iv) environmental applications of rGO-based nanohybrids prepared by electrodeposition. This article critically discusses the advantages and disadvantages of electrochemical-related graphene, outlines future challenges, and provides insightful views and references for other researchers.

Enhanced Supercapacitor Performance Using a Co3 O4 @Co3 S4 Nanocomposite on Reduced Graphene Oxide/Ni Foam Electrodes

To avoid an enormous energy crisis in the not-too-distant future, it be emergent to establish high-performance energy storage devices such as supercapacitors. For this purpose, a three-dimensional (3D) heterostructure of Co₃ O₄ and Co₃ S₄ on nickel foam (NF) that is covered by reduced graphene oxide (rGO) has been prepared by following a facile multistep method. At first, rGO nanosheets are deposited on NF under mild hydrothermal conditions to increase the surface area. Subsequently, nanowalls of cobalt oxide are electro-deposited on rGO/Ni foam by applying cyclic-voltammetry (CV) under optimized conditions. Finally, for the synthesis of Co₃ O₄ @Co₃ S₄ nanocomposite, the nanostructure of Co₃ S₄ was fabricated from Co₃ O₄ nanowalls on rGO/NF by following an ordinary hydrothermal process through the sulfurization for the electrochemical application. The samples are characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The obtained sample delivers a high capacitance of 13.34 F cm^-2 (5651.24 F g^-1 ) at a current density of 6 mA cm^-2 compared to the Co₃ O₄ /rGO/NF electrode with a capacitance of 3.06 F cm^-2 (1230.77 F g^-1 ) at the same current density. The proposed electrode illustrates the superior electrochemical performance such as excellent specific energy density of 85.68 W h Kg^-1 , specific power density of 6048.03 W kg^-1 and a superior cycling performance (86% after 1000 charge/discharge cycles at a scan rate of 5 mV s^-1 ). Finally, by using Co₃ O₄ @Co₃ S₄ /rGO/NF and the activated carbon-based electrode as positive and negative electrodes, respectively, an asymmetric supercapacitor (ASC) device was assembled. The fabricated ASC provides an appropriate specific capacitance of 79.15 mF cm^-2 at the applied current density of 1 mA cm^-2 , and delivered an energy density of 0.143 Wh kg^-1 at the power density of 5.42 W kg^-1 .

Polyaniline/reduced graphene oxide foams as metal-free cathodes for stable lithium-oxygen batteries

Lithium-oxygen batteries (LOBs) are considered as next-generation energy storage devices owing to their high-energy densities, yet they generally suffer from low actual specific capacity and poor cycle performance. To solve these issues, a range of electrocatalysts have been introduced in the cathode to reduce the overpotential during charge/discharge cycles and minimize unwanted side reactions. Due to relative high costs and limited reserves of noble metals and their compounds, it is important to develop low-cost and efficient metal-free electrocatalysts. Here, we report a simple method to prepare three-dimensional porous polyaniline (PANI)/reduced graphene oxide foams (PPGFs) with different PANI contents via a two-step self-assembly process. When these foams are tested as the cathode in LOBs, the device using the PPGF with 50% PANI content exhibits a discharge capacity up to 36 010 mAh g^-1 and an excellent cycling stability (260 cycles at 1000 mAh g^-1 and 500 cycles at 500 mAh g^-1), provid ing new insights into the design of next-generation metal-free cathodes for LOBs.

Polyaniline/Al Bismuthate Composite Nanorods Modified Glassy Carbon Electrode for the Detection of Benzoic Acid

Context:

Benzoic acid is a kind of extensively used preservative. It is of great significance to detect benzoic acid by a rapid method for quality assurance and protection in the fields of pharmaceutical, food and chemistry industry.

Objective:

The present research is aimed to prepare polyaniline/Al bismuthate composite nanorods by an in-situ polymerizing process for effective detection of benzoic acid.

Methods:

The polyaniline/Al bismuthate composite nanorods are prepared by an in-situ polymerizing process. The structure, morphology and electrochemical performance of the obtained polyaniline/Al bismuthate composite nanorods are analyzed by X-ray diffraction (XRD), transmission electron microscopy and electrochemical measurement.

Results:

XRD and transmission electron microscopy observations show that the amorphous nanoscale polyaniline particles attach to the surface of the crystalline nanorods. The electrochemical measurement of 2 mM benzoic acid using the composite nanorods modified glassy carbon electrode (GCE) shows that a pair of semi-reversible CV peaks is located at -0.11 V (cvp1) and -0.48 V (cvp1′), respectively. The electrochemical responses of 2 mM benzoic acid at the composite nanorods modified GCE are enhanced with increasing the scan rate and benzoic acid concentration. The polyaniline/Al bismuthate composite nanorods modified GCE shows a linear range of 0.001-2 mM with the limit of detection (LOD) of 0.18 µM.

Conclusion:

The composite nanorods may be used as the electrode materials with good reproducibility and stability for the detection of benzoic acid.

Facile functionalization of boron nitride (BN) for the development of high-performance asymmetric supercapacitors

Ternary composites based on functionalized BN, a carbonaceous material, and PANI are developed for real-time asymmetric supercapacitor application.

Modifying Reduced Graphene Oxide by Conducting Polymer Through a Hydrothermal Polymerization Method and its Application as Energy Storage Electrodes

We report chemical in situ deposition of conducting polymer poly (3,4-ethylenedioxythiophene) (PEDOT) on reduced graphene oxide (rGO) nanosheets through a simple hydrothermal polymerization method. The functional groups on graphene oxide (GO) were directly employed as an oxidant to trigger the polymerization of 3,4-ethylenedioxythiophene (EDOT), and the GO nanosheets were reduced into rGO accordingly in an aqueous environment. Well anchoring of ultrathin PEDOT on rGO through this oxidant-free method was confirmed by UV-Vis spectrum, FT-IR spectrum, SEM, and TEM analysis. The obvious enhancement of conductivity was observed after the covering of PEDOT on rGO, and this composite showed high conductivity about 88.5 S/cm. The electrochemical performance results revealed that rGO/PEDOT composite electrode exhibits high specific capacitance about 202.7 F/g. The good synergetic effect between PEDOT and rGO also makes sure highly stable reversibility of composite electrode during charging/discharging process, and more than 90% initial capacitance retains after 9000 times cycles. In addition, the electrode based on rGO/PEDOT deposited on the cotton fabric shows excellent flexible ability with the evidence that 98% of the initial capacitance of electrode maintained after three thousands of free bending, which shows promising energy storage performance for flexible devices. .

A resource-utilization way of the waste printed circuit boards to prepare silicon carbide nanoparticles and their photocatalytic application

A resource-utilization strategy of the waste PCBs was developed: preparation of high value-added silicon carbide (SiC) nanoparticles using the waste PCBs as both silica and carbon precursors. The preparation process contained three optimized steps: acid wash pretreatment with 3 mol L^-1 nitric acid at 60 °C for 96 h, low-temperature pyrolysis at 500 °C to allow the epoxy resin to decompose into carbon, and high-temperature pyrolysis at 1600 °C (in situ carbothermal reduction) to gain pure SiC nanoparticles. The pseudo first-order reaction rate constant (k) of the p-n heterojunction of SiC/TiO₂ towards the photocatalytic degradation of methylene blue was 0.0219 min^-1, 3.42 and 3.98 times that of TiO₂ and no acid washed-SiC/TiO₂, respectively.

Nanocellulose-Based Conductive Membranes for Free-Standing Supercapacitors: A Review

There is currently strong demand for the development of advanced energy storage devices with inexpensive, flexibility, lightweight, and eco-friendly materials. Cellulose is considered as a suitable material that has the potential to meet the requirements of the advanced energy storage devices. Specifically, nanocellulose has been shown to be an environmentally friendly material that has low density and high specific strength, Young's modulus, and surface-to-volume ratio compared to synthetic materials. Furthermore, it can be isolated from a variety of plants through several simple and rapid methods. Cellulose-based conductive composite membranes can be assembled into supercapacitors to achieve free-standing, lightweight, and flexible energy storage devices. Therefore, they have attracted extensive research interest for the development of small-size wearable devices, implantable sensors, and smart skin. Various conductive materials can be loaded onto nanocellulose substrates to endow or enhance the electrochemical performance of supercapacitors by taking advantage of the high loading capacity of nanocellulose membranes for brittle conductive materials. Several factors can impact the electronic performance of a nanocellulose-based supercapacitor, such as the methods of loading conductive materials and the types of conductive materials, as will be discussed in this review.

Removal of hexavalent chromium from water using polyaniline/ wood sawdust/ poly ethylene glycol composite: an experimental study

Polyaniline/ Sawdust /Poly Ethylene Glycol/ (PANi/SD/PEG) composite synthesized chemically is used as an adsorbent to remove hexavalent chromium from water. Adsorption experiments have been done in batch and continuous (column) mode. Some parameter such as pH, contact time, PANi/SD/PEG dose, isotherms in batch mode and pH, column bed depth and fluid flow rate in column mode were investigated. Result shows that PANi/SD/PEG has a good performance to remove hexavalent chromium ion from aqueous media. By presence of PEG, prepared composite has been homogenized and further absorption has been occurred. The best adsorption occurs under pH 2 and optimum contact time for removal of hexavalent chromium ion in batch experiment was about 30 min. Adsorption of Cr (VI) by PANi/SD/PEG fitted well in Langmuir isotherms. Maximum adsorption of hexavalent chromium was calculated 3.2 (mg/g). In column experiments, pH and column bed depth were found to be more prominent than fluid flow rate. Though, about 22% of Cr (VI) can be recovered using 0.1 M NaOH in the batch system, the recovered Cr (VI) in column system was less than 7.9%.

Recent Progress on Graphene/Polyaniline Composites for High-performance Supercapacitors

Electrode materials are crucial for the electrochemical performance of supercapacitors. In view of the high specific surface area, high conductivity of graphene nanosheets and the high pseudocapacitance of polyaniline (PANI), the combination of graphene with PANI has become a research hotspot. In this work, we summarize the recent advance on the synthesis of PANI and graphene/PANI composites, and their application in supercapacitors. The synthesis of PANI is the basis of preparing graphene/PANI composites, so we first introduce the synthesis methods of PANI. Then, the advances of two dimensional (2D) and three dimensional (3D) graphene/PANI composites are summarized according to the inherent feature of graphene. The 2D composites of pristine graphene and functionalized graphene with PANI are introduced separately; furthermore, the 3D composites are classified into three sections, including flexible graphene/PANI composites, graphene framework based composites, and printable graphene/PANI composites. At last, aiming at solving the current challenges of graphene/PANI composites, we put forward some strategies for preparing high performance graphene/PANI composite electrodes.

Sonochemical synthesis of terbium tungstate for developing high power supercapacitors with enhanced energy densities

Sonochemically prepared nanoparticles of terbium tungstate (TWNPs) were evaluated through scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy, and the optimal products were further characterized in terms of their electrochemical properties using conventional and continuous cyclic voltammetry (CV, and CCV), galvanostatic charge/discharge technique, and electrochemical impedance spectroscopy (EIS). The CV studies indicated the TWNPs to have specific capacitance (SC) values of 336 and 205 F g^-1 at 1 and 200 mV s^-1, and galvanostatic charge-discharge tests revealed the SC of the TWNP-based electrodes to be 300 F g^-1 at 1 Ag^-1. Also continuous cyclic voltammetry evaluations proved the sample as having a capacitance retention value of 95.3% after applying 4000 potential cycles. In the light of the results TWNPs were concluded as favorable electrode materials for use in hybrid vehicle systems.

A nanocrystalline structured NiO/MnO2@nitrogen-doped graphene oxide hybrid nanocomposite for high performance supercapacitors

A nanocrystalline NiO@MnO₂/NGO hybrid composite electrode showed specific capacitance of 1490 Fg⁻¹ at a current density of 0.5 Ag⁻¹ and retains 98% up to 2000 cycles indicating its good cyclic stability.