Se-Ni(OH)2-shelled vertically oriented NiSe nanowires as a superior electrocatalyst toward urea oxidation reaction of fuel cells

Electrodegradation of nitrogenous pollutants in sewage: from reaction fundamentals to energy valorization applications

The excessive accumulation of nitrogen pollutants (mainly nitrate, nitrite, ammonia nitrogen, hydrazine, and urea) in water bodies seriously disrupts the natural nitrogen cycle and poses a significant threat to human life and health. Electrolysis is considered a promising method to degrade these nitrogenous pollutants in sewage, with the advantages of high efficiency, wide generality, easy operability, retrievability, and environmental friendliness. For particular energy devices, including metal-nitrate batteries, direct fuel cells, and hybrid water electrolyzers, the realization of energy valorization from sewage purification processes (e.g., valuable chemical generation, electricity output, and hydrogen production) becomes feasible. Despite the progress in the research on pollutant electrodegradation, the development of electrocatalysts with high activity, stability, and selectivity for pollutant removal, coupled with corresponding energy devices, remains a challenge. This review comprehensively provides advanced insights into the electrodegradation processes of nitrogenous pollutants and relevant energy valorization strategies, focusing on the reaction mechanisms, activity descriptors, electrocatalyst design, and actuated electrodes and operation parameters of tailored energy conversion devices. A feasibility analysis of electrodegradation on real wastewater samples from the perspective of pollutant concentration, pollutant accumulation, and electrolyte effects is provided. Challenges and prospects for the future development of electrodegradation systems are also discussed in detail to bridge the gap between experimental trials and commercial applications.

Selenium-enriched hollow NiCo2O4/NiO heterostructured nanocages as an efficient electrocatalyst for oxygen evolution reaction

Finding clean, sustainable, and environmentally friendly technologies is especially crucial in addressing both energy and environmental challenges. To accelerate the oxygen evolution reaction (OER) and to overcome the obstacle of high energy consumption, exploring high-performance electrocatalysts is imperative to maximize the practical applicability of water splitting. Developing electrocatalyst through strategic surface modifications represents a significant approach for the construction of active catalytic centers. In the present work, we successfully synthesized selenium-incorporated hollow NiCo2O4/NiO heterostructured nanocages as electrocatalysts for the OER by precisely controlling the structure and composition of the material. The findings demonstrated that the surface-reconstructed hollow 5 wt% Se-NiCo2O4/NiO heterostructured nanocages resulted in an increased number of active sites through interfacial engineering. Benefiting from the structural control, mass transport was further expedited and due to increased conductivity, accelerated the charge transfer processes within the system. The electrocatalyst exhibited remarkable activity for the OER and displayed a low overpotential (η = 288 mV) at a current density (j) of 10 mA cm-2, small Tafel slope (66.7 mV dec-1) and better stability. This work offers a viable and adaptable method for fabricating a range of functional coordinated MOF compounds that are capable of utilization across diverse energy applications, including storage, conversion and environmental purposes.

Structural Design of Nickel Hydroxide for Efficient Urea Electrooxidation

Urea stands as a ubiquitous environmental contaminant. However, not only does urea oxidation reaction technology facilitate energy conversion, but it also significantly contributes to treating wastewater rich in urea. Furthermore, urea electrolysis has a significantly lower theoretical potential (0.37 V) compared to water electrolysis (1.23 V). As an electrochemical reaction, the catalytic efficacy of urea oxidation is largely contingent upon the catalyst employed. Among the plethora of urea oxidation electrocatalysts, nickel-based compounds emerge as the preeminent transition metal due to their cost-effectiveness and heightened activity in urea oxidation. Ni(OH)2 is endowed with manifold advantages, including structural versatility, facile synthesis, and stability in alkaline environments. This review delineates the recent advancements in Ni(OH)2 catalysts for electrocatalytic urea oxidation reaction, encapsulating pivotal research findings in morphology, dopant incorporation, defect engineering, and heterogeneous architectures. Additionally, we have proposed personal insights into the challenges encountered in the research on nickel hydroxide for urea oxidation, aiming to promote efficient urea conversion and facilitate its practical applications.

A NiMOF integrated with conductive materials for efficient bifunctional electrocatalysis of urea oxidation and oxygen evolution reactions

The development of urea oxidation reaction (UOR) and oxygen evolution reaction (OER) bifunctional electrocatalysts has dual significance in promoting hydrogen energy production and urea-rich wastewater treatment. Herein, a carboxylated multi-walled carbon nanotube (MWCNT-COOH)-ferrocene carboxylic acid (Fc-COOH) modulated NiMOF hybrid material (MWCNT-NiMOF(Fc)) has been synthesized for dual electrocatalysis of the UOR and OER. The material characterization results indicated that MWCNT-COOH and Fc-COOH were integrated into the framework structure of the NiMOF. The direct interaction between the NiMOF and MWCNT/Fc facilitated electron transfer in the hybrid material and led to lattice strain, which improved the charge transfer kinetics, promoted the exposure of more unsaturated Ni sites, and increased the electrochemically active surface area. These factors together enhanced the electrocatalytic activity of MWCNT-NiMOF(Fc) towards the UOR and OER. Using a glassy carbon electrode as the substrate, MWCNT-NiMOF(Fc) exhibited low potential requirements, low Tafel slopes, and high stability. In overall urea and water splitting electrolysis cells, the excellent UOR and OER dual functional catalytic ability and enormous practical application potential of the MWCNT-NiMOF(Fc) modified foam nickel electrode were further demonstrated. On the basis of the above research, the influence of a KOH environment on urea electrolysis was further studied, and the urea electrolysis products were analyzed, promoting a more comprehensive understanding of the catalytic performance of MWCNT-NiMOF(Fc) for urea oxidation. This study provides a new approach for developing high-performance NiMOF-based electrocatalysts for challenging bifunctional UOR/OER applications, and has potential application value in hydrogen production from urea-containing wastewater electrolysis.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Dual cation-modified hierarchical nickel hydroxide nanosheet arrays as efficient and robust electrocatalysts for the urea oxidation reaction

The rational modification of electronic structures to create catalytically active sites has been proved to be a promising strategy to efficiently facilitate the urea oxidation reaction (UOR). Herein, a well-defined nanosheet arrays catalyst of Ni(OH)2 doped with dual cations of Co and Mn on Ni foam (NF) (Co/Mn-Ni(OH)2) is synthesized through a simple hydrothermal process. Benefiting from the advantages of unique structures and modified binding strengths, it is found experimentally that the obtained Co/Mn-Ni(OH)2 catalyst only requires a potential of 1.38 V to deliver a current density of 100 mA cm-2 and exhibits a small Tafel slope of 35 mV dec-1, outperforming single-component-incorporated Ni(OH)2. Moreover, the catalyst has shown excellent stability for 25 h at a current density of 50 mA cm-2. Additionally, first-principles calculations demonstrate that the co-incorporation of Co and Mn remarkably lowers the adsorption barrier of CO(NH2)2* on the catalyst surface, and accelerates the dissociation of the CO(NH2)2* intermediate into CO* and NH* intermediates, which synergistically improve the UOR reaction kinetics. This work provides a generic paradigm for designing advanced and effective catalysts toward the UOR.

Modulation Strategies for the Preparation of High-Performance Catalysts for Urea Oxidation Reaction and Their Applications

Compared with the traditional electrolysis of water to produce hydrogen, urea-assisted electrolysis of water to produce hydrogen has significant advantages and has received extensive attention from researchers. Unfortunately, urea oxidation reaction (UOR) involves a complex six-electron transfer process leading to high overpotential, which forces researchers to develop high-performance UOR catalysts to drive the development of urea-assisted water splitting. Based on the UOR mechanism and extensive literature research, this review summarizes the strategies for preparing highly efficient UOR catalysts. First, the UOR mechanism is introduced and the characteristics of excellent UOR catalysts are pointed out. Aiming at this, the following modulation strategies are proposed to improve the catalytic performance based on summarizing various literature: 1) Accelerating the active phase formation to reduce initial potential; 2) Creating double active sites to trigger a new UOR mechanism; 3) Accelerating urea adsorption and promoting C─N bond cleavage to ensure the effective conduct of UOR; 4) Promoting the desorption of CO2 to improve stability and prevent catalyst poisoning; 5) Promoting electron transfer to overcome the inherent slow dynamics of UOR; 6) Increasing active sites or active surface area. Then, the application of UOR in electrochemical devices is summarized. Finally, the current deficiencies and future directions are discussed.

Progress in Manipulating Dynamic Surface Reconstruction via Anion Modulation for Electrocatalytic Water Oxidation

The development of efficient and economical electrocatalysts for oxygen evolution reaction (OER) is of paramount importance for the sustainable production of renewable fuels and energy storage systems; however, the sluggish OER kinetics involving multistep four proton-coupled electron transfer hampers progress in these systems. Fortunately, surface reconstruction offers promising potential to improve OER catalyst design. Anion modulation plays a crucial role in controlling the extent of surface reconstruction and positively persuading the reconstructed species' performances. This review starts by providing a general explanation of how various types of anions can trigger dynamic surface reconstruction and create different combinations with pre-catalysts. Next, the influences of anion modulation on manipulating the surface dynamic reconstruction process are discussed based on the in situ advanced characterization techniques. Furthermore, various effects of survived anionic groups in reconstructed species on water oxidation activity are further discussed. Finally, the challenges and prospects for the future development directions of anion modulation for redirecting dynamic surface reconstruction to construct highly efficient and practical catalysts for water oxidation are proposed.

Preparation of 3D Nd2O3-NiSe-Modified Nitrogen-Doped Carbon and Its Electrocatalytic Oxidation of Methanol and Urea

Developing renewable energy sources and controlling water pollution are critical but challenging problems. Urea oxidation (UOR) and methanol oxidation (MOR), both of which have high research value, have the potential to effectively address wastewater pollution and energy crisis problems. A three-dimensional neodymium-dioxide/nickel-selenide-modified nitrogen-doped carbon nanosheet (Nd₂O₃-NiSe-NC) catalyst is prepared in this study by using mixed freeze-drying, salt-template-assisted technology, and high-temperature pyrolysis. The Nd₂O₃-NiSe-NC electrode showed good catalytic activity for MOR (peak current density ~145.04 mA cm^-2 and low oxidation potential ~1.33 V) and UOR (peak current density ~100.68 mA cm^-2 and low oxidation potential ~1.32 V); the catalyst has excellent MOR and UOR characteristics. The electrochemical reaction activity and the electron transfer rate increased because of selenide and carbon doping. Moreover, the synergistic action of neodymium oxide doping, nickel selenide, and the oxygen vacancy generated at the interface can adjust the electronic structure. The doping of rare-earth-metal oxides can also effectively adjust the electronic density of nickel selenide, allowing it to act as a cocatalyst, thus improving the catalytic activity in the UOR and MOR processes. The optimal UOR and MOR properties are achieved by adjusting the catalyst ratio and carbonization temperature. This experiment presents a straightforward synthetic method for creating a new rare-earth-based composite catalyst.

Recent Development of Nickel-Based Electrocatalysts for Urea Electrolysis in Alkaline Solution

Recently, urea electrolysis has been regarded as an up-and-coming pathway for the sustainability of hydrogen fuel production according to its far lower theoretical and thermodynamic electrolytic cell potential (0.37 V) compared to water electrolysis (1.23 V) and rectification of urea-rich wastewater pollution. The new era of the "hydrogen energy economy" involving urea electrolysis can efficiently promote the development of a low-carbon future. In recent decades, numerous inexpensive and fruitful nickel-based materials (metallic Ni, Ni-alloys, oxides/hydroxides, chalcogenides, nitrides and phosphides) have been explored as potential energy saving monofunctional and bifunctional electrocatalysts for urea electrolysis in alkaline solution. In this review, we start with a discussion about the basics and fundamentals of urea electrolysis, including the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER), and then discuss the strategies for designing electrocatalysts for the UOR, HER and both reactions (bifunctional). Next, the catalytic performance, mechanisms and factors including morphology, composition and electrode/electrolyte kinetics for the ameliorated and diminished activity of the various aforementioned nickel-based electrocatalysts for urea electrolysis, including monofunctional (UOR or HER) and bifunctional (UOR and HER) types, are summarized. Lastly, the features of persisting challenges, future prospects and expectations of unravelling the bifunctional electrocatalysts for urea-based energy conversion technologies, including urea electrolysis, urea fuel cells and photoelectrochemical urea splitting, are illuminated.

In situ construction of Fe3O4@FeOOH for efficient electrocatalytic urea oxidation

Substituting water oxidation half of water splitting with anodic oxidation of urea can reduce the cost of H₂ production and provide an avenue for treating urea-rich wastewater. However, developing an efficient and stable electrocatalyst is necessary to overcome the indolent kinetics of the urea oxidation reaction (UOR). Accordingly, we have used the Schikorr reaction to deposit Fe₃O₄ particles on the nickel foam (Fe₃O₄/NF). Results from the various analysis indicated that under the operational conditions, Fe₃O₄ underwent surface reconstruction to produce a heterolayered structure wherein a catalytically active FeOOH layer encased a conducting Fe₃O₄. Fe₃O₄/NF outperformed RuO₂ as a UOR catalyst and delivered a current density of 10 50 and 100 mA cm^-2 at low applied potentials of 1.38 1.42 and 1.46 V, respectively, with a Tafel slope of 28 mV dec^-1. At the applied potential of 1.4 V, Fe₃O₄/NF demonstrated a turnover frequency (TOF) of 2.8 × 10^-3 s^-1, highlighting its superior intrinsic activity. In addition, a symmetrical urea electrolyzer constructed using Fe₃O₄/NF produced the current density of 10 mA cm^-2 at a cell voltage of 1.54 V.

Recent advances in the pre-oxidation process in electrocatalytic urea oxidation reactions

The electrocatalytic urea oxidation reaction (UOR) has attracted substantial research interests over the past few years owing to its critical role in coupled electrochemical systems for energy conversion, for example, coupling with the hydrogen evolution reaction (HER) to realize urea-assisted hydrogen production and assembling direct urea fuel cells (DUFC) by coupling with the oxygen reduction reaction (ORR). The UOR process has been proved to be a two-step process which involves an electrochemical pre-oxidation reaction of the metal sites and a subsequent chemical oxidation of the urea molecules on the as-formed high-valence metal sites. Hence, designing advanced (pre-)catalysts with a boosted pre-oxidation reaction is of great importance in improving the UOR performance and thus accelerating the coupled reactions. In this feature article, we discuss the significant role of the pre-oxidation process during the urea electro-oxidation reaction, and summarize detailed strategies and recent advances in promoting the pre-oxidation reaction, including the modulation of the crystallinity, active phase engineering, defect engineering, elemental incorporation and constructing hierarchical nanostructures. We anticipate that this feature article will offer helpful guidance for the design and optimization of advanced (pre-)catalysts for UOR and related energy conversion applications.

Electro-Reforming Polyethylene Terephthalate Plastic to Co-Produce Valued Chemicals and Green Hydrogen

Upcycling plastic waste pollution for sustainable resources and energy is an ideal solution to plastic waste-related environmental issues. Polyethylene terephthalate (PET), one of the most prominent single-use daily plastics with up to millions of tons produced annually, has recently been explored with respect to chemical recycling to ameliorate its environmental impact. In this work, we report an electrochemical upcycling approach to electrocatalytic oxidation of PET hydrolysate using Cu-based nanowire catalysts. We demonstrate that the electrocatalyst can catalyze the ethylene glycol (EG) molecule derived from PET waste toward formate with high selectivity and exhibit a lower onset potential for EG oxidation than for water oxidation. Experimental and density functional theory calculation results reveal that the oxidation pathway of EG on CuO can selectively break the C-C bond to generate formic acid. This work sheds light on employing earth-abundant metal catalysts to convert PET plastic waste to produce valued chemicals and green hydrogen.

Recent Developments for the Application of 3D Structured Material Nickel Foam and Graphene Foam in Direct Liquid Fuel Cells and Electrolyzers

Platinum and platinum-based catalysts are some of the most effective catalysts used in fuel cells. However, electrocatalysts used for direct liquid fuel cells (DLFCs) and electrolyzers are high cost and suffer from several other problems, thus hindering their commercialization as power sources to produce clean energy. Common issues in electrocatalysts are low stability and durability, slow kinetics, catalyst poisoning, high catalyst loading, high cost of the catalytic materials, poisoning of the electrocatalysts, and formation of intermediate products during electrochemical reactions. The use of catalyst supports can enhance the catalytic activity and stability of the power sources. Thus, nickel foam and graphene foam with 3D structures have advantages over other catalyst supports. This paper presents the application of nickel foam and graphene foam as catalyst supports that enhance the activities, selectivity, efficiency, specific surface area, and exposure of the active sites of DLFCs. Selected recent studies on the use of foam in electrolyzers are also presented.

Coaxial Ni-S@N-Doped Carbon Nanofibers Derived Hierarchical Electrodes for Efficient H2 Production via Urea Electrolysis

Electrochemical water splitting into hydrogen is a promising strategy for hydrogen production powered by solar energy. However, the cell voltage of an electrolyzer is still too high for practical application, which is mainly limited by the sluggish oxygen evolution reaction process. To this end, hybrid water electrolyzers have drawn tremendous attention. Herein, coaxial Ni/Ni₃S₂@N-doped nanofibers are directly grown on nickel foam (NF), which is highly active for hydrogen evolution reaction. Meanwhile, the Ni₃S₂@N-doped nanofibers on NF prepared in an Ar atmosphere display superior urea oxidation reaction performance to previously reported catalysts. The cell voltage is about 1.50 V in urea electrolysis to deliver a current density of 20 mA cm^-2, lower than that of a traditional water electrolyzer (1.82 V). The current density is around 77% relative to its initial value of 20 mA cm^-2 after 20 h, superior to Pt/C|Ir/C-based urea electrolysis (14%). It is found that the synergistic effect between metallic Ni and Ni₃S₂, as well as the interfacial effect between metal centers and N-doped carbon, favors the initial dissociation of H₂O and the adsorption/desorption of H* with thermal neutral Gibbs free energy. Meanwhile, the in-situ generated NiOOH on the outer surface of Ni₃S₂ possessed lower electrochemical activation energy for urea decomposition. Meanwhile, the abundant oxygen vacancies in electrodes could expose more active sites for the adsorption of intermediates, including H* and OOH*. It is also found that the hierarchical nanostructure of densely packed nanowires provides ideal electronic and ionic transport paths for fast electrocatalytic kinetics. The present work indicated that the modulation of compositions and hierarchical nanostructure is effective to prepare efficient catalysts for H₂ production via urea electrolysis.

Designing Advanced Catalysts for Energy Conversion Based on Urea Oxidation Reaction

Urea oxidation reaction (UOR) is the underlying reaction that determines the performance of modern urea-based energy conversion technologies. These technologies include electrocatalytic and photoelectrochemical urea splitting for hydrogen production and direct urea fuel cells as power engines. They have demonstrated great potentials as alternatives to current water splitting and hydrogen fuel cell systems with more favorable operating conditions and cost effectiveness. At the moment, UOR performance is mainly limited by the 6-electron transfer process. In this case, various material design and synthesis strategies have recently been reported to produce highly efficient UOR catalysts. The performance of these advanced catalysts is optimized by the modification of their structural and chemical properties, including porosity development, heterostructure construction, defect engineering, surface functionalization, and electronic structure modulation. Considering the rich progress in this field, the recent advances in the design and synthesis of UOR catalysts for urea electrolysis, photoelectrochemical urea splitting, and direct urea fuel cells are reviewed here. Particular attention is paid to those design concepts, which specifically target the characteristics of urea molecules. Moreover, challenges and prospects for the future development of urea-based energy conversion technologies and corresponding catalysts are also discussed.

Low-Cost Ni2P/Ni0.96S Heterostructured Bifunctional Electrocatalyst toward Highly Efficient Overall Urea-Water Electrolysis

Water splitting is a sustainable approach for production of hydrogen to fuel some clean energy technologies. This process, unfortunately, has been significantly impeded by the puzzles in either the efficient but economically unaffordable noble-metal-based catalysts or the low-cost but kinetically sluggish abundant-element-based catalysts. Particularly, the discovery of efficient bifunctional catalysts that can simultaneously trigger the reactions of both anode and cathode for overall water splitting still remains as a grand challenge. Herein, a novel low-cost bifunctional Ni₂P/Ni_0.96S heterostructured electrocatalyst, which is active for both the urea oxidation reaction at the anode and the hydrogen evolution reaction at the cathode, is innovated for high-efficiency overall splitting of urea-rich wastewater. A systematic configuration of a Ni foam (NF)-supported Ni₂P/Ni_0.96S catalyst electrode exhibits superior catalytic activity and stability. The Ni₂P/Ni_0.96S/NF||Ni₂P/Ni_0.96S/NF cell needs only 1.453 V to reach a current density of 100 mA/cm² in basic urea-containing water, while it is 1.693 V for a reference noble-based Pt/C/NF||IrO₂/NF electrolysis cell. This work therefore not only contributes to develop a low-cost, high-efficiency, bifunctional electrocatalyst but also provides a practically feasible approach for urea-rich wastewater treatment.

Recent progress with electrocatalysts for urea electrolysis in alkaline media for energy-saving hydrogen production

Urea electrolysis is a promising energy-saving avenue for hydrogen production owing to the low cell voltage, wastewater remediation and abundant electrocatalysts.

Recent Advances in the Electro-Oxidation of Urea for Direct Urea Fuel Cell and Urea Electrolysis

This paper provides an overview of recent advances in urea electro-oxidation. Urea sources are abundant from human urine, urea-containing wastewater, and industrial urea, thus becoming an attractive option as anodic fuel for the application in direct urea fuel cells (DUFCs). Besides, as a hydrogen-rich chemical fuel, urea can also be electrolyzed to produce hydrogen for energy storage in the near future. The exact mechanisms of urea decomposition are pretty different in alkaline or neutral mediums and are separately discussed in detail. More importantly, the development of anodic electro-catalysts is of great significance for improving the electrochemical performance of both DUFCs and urea electrolysis cells, which is systematically summarized in our review. Challenges and prospects on the future development of urea electro-oxidation are particularly proposed.