Polypyrrole-Decorated Hierarchical NiCo2O4 Nanoneedles/Carbon Fiber Papers for Flexible High-Performance Supercapacitor Applications

Construction and application of NiCo2O4@MnS composite with hierarchical structure for hybrid supercapacitor

The development of an electrochemical energy storage system with exceptional performance is an important way to address the energy crisis and environmental pollution of the modem world. In this study, an NiCo2O4@MnS composite with a unique hierarchical structure has been successfully synthesized on an NF substrate using the hydrothermal-electrodeposition method. The results indicate that NiCo2O4@MnS possesses superior specific capacitance and excellent cycling stability. At a current density of 2 A g-1, its specific capacitance can reach 2100 F g-1, while the capacitance retention is still 76% after 10 000 cycles at 10 A g-1. Moreover, when the current density is 1 A g-1, the assembled NiCo2O4@MnS//AC device can deliver a specific capacitance of 203 F g-1, and the energy density is up to 55 W h kg-1 at a power density of 697 W kg-1. These outstanding electrochemical properties of NiCo2O4@MnS can be ascribed to the increase in ion diffusion, specific surface area and electronic conductivity due to its unique hierarchical structure and introduction of MnS.

Sustainable approach of La doped CuFe2O4 nanomaterial for electrochemical lead and paracetamol sensing action with multiple applications

This present research aimed to investigate the novel applications of synthesized La doped CuFe2O4 nanomaterial (LCF NMs) using renewable bio-fuel (Aegle Marmelos extract) by combustion process. The sensor applications were accomplished by modified electrode using LCF NMs with graphite powder and examined its excellent sensing action towards heavy metal (Lead content) and drug chemical (Paracetamol) substances. The thermodynamics of redox potential and super-capacitor behavior of LCF NMs were investigated through Cyclic Voltametric (CV) and Electrochemical Impedance Spectral (EIS) methods under specific conditions at scan rate of 1 to 5 mV/s. The heterogeneous photo-catalytic process of prepared NMs on Fast orange Red (FOR) dye-decolouration was investigated and noted its excellent degradation (91.7%) at 90 min using 20 ppm of dye solution and 40 mg of synthesized samples under Sun-light irradiation. Further, the antibacterial activity of synthesized NMs is investigated against various strains of gram positive (Bacillus subtillis) and gram negative bacteria (Pseudomonas aeruginosa), which confirms that the LCF NMs have higher activity towards gram positive bacteria with an average inhibition zone of 19 mm. This synthesized LCF NMs is a multi-functional material with stable and eco-friendly materials.

A flexible wearable self-supporting hybrid supercapacitor device based on hierarchical nickel cobalt sulfide@C electrode

A flexible wearable electrode consisting of nickel-cobalt sulfide (NCS) nanowires was fabricated in this study. Self-supporting NCS was grown in situ on porous carbon nanofibers without a binder as a novel material for supercapacitor electrodes. The NCS nanowires were grown using cyclic voltammetry electrodeposition, which proved to be a fast and environmentally friendly method with good controllability of the material structure. One-dimensional carbon nanofibers (C) have high surface-area-to-volume ratios, short ion transmission distances, excellent mechanical strengths, and remarkable flexibilities. Moreover, the NCS@C flexible electrode exhibited a synergetic effect with the active compounds, and the dense active sites were uniformly distributed across the entire surface of the carbon fibers, enabling rapid electron transport and enhancing the electrochemical properties of the NCS@C nanowires. The NCS@C achieved specific capacitances of 334.7 and 242.0 mAh g-1 at a current density of 2 A g-1 and high current densities (up to 40 A g-1), respectively, corresponding to a 72.3% retention rate. An NCS@C-nanofilm-based cathode and an activated-carbon-based anode were used to fabricate a flexible asymmetric supercapacitor. The device exhibited high energy and power densities of 12.91 Wh kg-1 and 358 W kg-1, respectively.

A Facile Two-Step Hydrothermal Synthesis of Co(OH)2@NiCo2O4 Nanosheet Nanocomposites for Supercapacitor Electrodes

The composites of NiCo₂O₄ with unique structures were substantially investigated as promising electrodes. In this study, the unique structured nanosheets anchored on nickel foam (Ni foam) were prepared under the hydrothermal technique of NiCo₂O₄ and subsequent preparation of Co(OH)₂. The Co(OH)₂@NiCo₂O₄ nanosheet composite has demonstrated higher specific capacitances owing to its excellent specific surface region, enhanced rate properties, and outstanding electrical conductivities. Moreover, the electrochemical properties were analyzed in a three-electrode configuration to study the sample material. The as-designed Co(OH)₂@NiCo₂O₄ nanosheet achieves higher specific capacitances of 1308 F·g^-1 at 0.5 A·g^-1 and notable long cycles with 92.83% capacity retention over 6000 cycles. The Co(OH)₂@NiCo₂O₄ nanosheet electrode exhibits a long life span and high capacitances compared with the NiCo₂O₄ and Co(OH)₂ electrodes, respectively. These outstanding electrochemical properties are mainly because of their porous construction and the synergistic effects between NiCo₂O₄ and Co(OH)₂. Such unique Co(OH)₂@NiCo₂O₄ nanosheets not only display promising applications in renewable storage but also reiterate to scientists of the unlimited potential of high-performance materials.

Nickel Cobaltite: A Positive Electrode Material for Hybrid Supercapacitors

The increased demand of energy due to the recent technological advances in diverse fields such as portable electronics and electric vehicles is often hindered by the poor capability of energy-storage systems. Although supercapacitors (SCs) exhibit higher power density than state-of-the art batteries, their insufficient energy density remains a major challenge. An emerging concept of hybrid supercapacitors (HSCs) with the combination of one capacitive and one battery electrode in a single cell holds a great promise to deliver high energy density without sacrificing power density and cycling stability. This Minireview elaborates the recent advances of use of nickel cobaltite (NiCo₂ O₄ ) as a potential positive electrode (battery-like) for HSCs. A brief introduction on the structural benefits and charge storage mechanisms of NiCo₂ O₄ was provided. It further shed a light on composites of NiCo₂ O₄ with different materials like carbon, polymers, metal oxides, and others, which altogether helps in increasing the electrochemical performance of HSCs. Finally, the key scientific challenges and perspectives on building high-performance HSCs for future-generation applications were reviewed.

Thermal effect on the pseudocapacitive behavior of high-performance flexible supercapacitors based on polypyrrole-decorated carbon cloth electrodes

The electrochemical performance of flexible CC/PPy supercapacitors was systematically investigated at various surrounding temperatures.

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO₂-coated and Fe₂O₃-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO₂ were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO₂-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe₂O₃-coated carbon fiber electrode showed a uniform distribution of porous Fe₂O₃ nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO₂-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g^-1 at 0.7 A g^-1 and good rate capability of 34.8% at 4.9 A g^-1. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg^-1 at a power density of 490 W kg^-1 and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.

Morphological Modulation of Conducting Polymer Nanocomposites with Nickel Cobaltite/Reduced Graphene Oxide and Their Subtle Effects on the Capacitive Behaviors

This work reports on the urchin-like architecture-based nickel cobaltite (NiCo₂O₄)/reduced graphene oxide (rGO)/conducting polymer [polyaniline (PANI) or polypyrrole (PPy)] nanocomposites prepared through a hydrothermal synthesis procedure, followed by in situ polymerization techniques. Subsequently, these materials are subjected to electrochemical investigation to search for promising electrode materials for energy storage applications. Interestingly, the morphology of NiCo₂O₄ varies upon the addition of rGO as well as nitrogen-doped rGO (N-rGO). When it is composite with rGO, it forms an urchin-like architecture, and with N-rGO, it forms nanoparticle structures having a diameter of 90 ± 10 nm. Further, these nanostructures are intricately coated by conducting polymers (such as PANI and PPy) as evidenced from the field emission scanning electron microscopy and high-resolution transmission electron microscopy observations, and the overall shape does not alter after the modification. All composites are investigated thoroughly by Fourier transform infrared, Raman, X-ray powder diffraction, and X-ray photoelectron spectroscopies to confer the formation and presence of polymers. The NiCo₂O₄/rGO/PPy nanocomposites exhibit an excellent specific capacitance of 1547 ± 5 F/g at a current density of 0.5 A/g, a better energy density of 34.37 ± 0.11 W h/kg at 0.5 A/g, a notable power density of 99.98 ± 0.31 W/kg at 0.5 A/g, and retains its 94 ± 1% specific capacitance after 5000 charge-discharge cycles. The uniform coating over the urchin-like architecture by conducting polymers constructs a typical morphology, and possibly, it is the key factor behind gaining such superior electrochemical behavior owing to (a) the enhancement of surface area and (b) the combination of double-layer capacitive and pseudocapacitive properties. Furthermore, a symmetric flexible supercapacitor device made of NiCo₂O₄/rGO/PPy nanocomposites provides superior electrochemical behavior.

Core-shell nanowires of NiCo2O4@α-Co(OH)2 on Ni foam with enhanced performances for supercapacitors

The composites of NiCo₂O₄ with unique structures are extensively explored as promising electrodes. In this work, core-shell structured nanowires anchored on nickel foam are synthesized by the hydrothermal synthesis of NiCo₂O₄ as core and subsequent electrodeposition of α-Co(OH)₂ as shell. The core-shell composites exhibit enhanced electrochemical performances ascribing to the synergistic reactions from both materials, showing higher specific capacitance than any single component. By changing the deposition time, the mass loading of α-Co(OH)₂ can be easily controlled. The electrochemical performances of the hybrid electrodes are diverse with the mass loading of Co(OH)₂. The optimized hybrid electrode with 3 mins electrodeposition exhibits the highest specific capacitance (1298 F g^-1 at 1 A g^-1) among all electrodes. The redox reaction is a main contributor to the total specific capacitance through electrochemical kinetics analysis. An asymmetric supercapacitor assembled by the optimized material as positive electrode and activated carbon as negative electrode can achieve a relatively high energy density of 39.7 Wh kg^-1 at a power density of 387.5 W kg^-1 (at 0.5 A g^-1) in a voltage of 1.55 V.

Carbon threads sweat-based supercapacitors for electronic textiles

Flexible and stretchable energy-storage batteries and supercapacitors suitable for wearable electronics are at the forefront of the emerging field of intelligent textiles. In this context, the work here presented reports on the development of a symmetrical wire-based supercapacitor able to use the wearer’s sweat as the electrolyte. The inner and outer electrodes consists of a carbon-based thread functionalized with a conductive polymer (polypyrrole) which improves the electrochemical performances of the supercapacitor. The inner electrode is coated with electrospun cellulose acetate fibres, as the separator, and the outer electrode is twisted around it. The electrochemical performances of carbon-based supercapacitors were analyzed using a simulated sweat solution and displayed a specific capacitance of 2.3 F.g⁻¹, an energy of 386.5 mWh.kg⁻¹ and a power density of 46.4 kW.kg⁻¹. Moreover, cycle stability and bendability studies were performed. Such energy conversion device has exhibited a stable electrochemical performance under mechanical deformation, over than 1000 cycles, which make it attractive for wearable electronics. Finally, four devices were tested by combining two supercapacitors in series with two in parallel demonstrating the ability to power a LED.

Three-dimensional porous carbonaceous network with in-situ entrapped metallic cobalt for supercapacitor application

Herein, we outline the fabrication of highly porous three-dimensional carbon-fiber network anchored with uniform metallic cobalt (Co) via electrospinning and subsequent post-modification approaches. First, cobalt acetate solution saturated electrospun polyacrylonitrile (PAN) nanofibrous mat was subjected to sodium borohydride (NaBH₄) solution which results in the fabrication of three dimensional (3D) hierarchical multilayer network. Restructuring of the 2D mat into multilayered sponges with metal particles entrapment is attributed to the in-situ generated hydrogen gas into the interconnected pores of the fibrous network simultaneous with reduction of cobalt salt into metallic cobalt by NaBH₄. The resulting mesh was stabilized and carbonization at inert atmosphere to obtain metallic cobalt (Co) embedded 3D carbon nanofibrous networks (Co@3D-CNFs). Physicochemical characterization and electrochemical analysis were performed. Results show carbon network was found to be expanded with bubbling like structures often embedded metallic Co nanoparticles. X-ray diffraction (XRD) pattern confirms the existence of the metallic cobalt particles on the carbon fiber networks. Furthermore, we establish a resulting composite (Co@3D-CNFs) identify the enhanced electrochemical performance having specific capacitance 762 F g^-1 compared to 173 and 180 F g^-1 for corresponding @3D-CNFs and 2D carbon nanofiber network with cobalt doped (Co@2D-CNFs) counterparts, respectively. The assembled Co2@3D-CNFs//NGH ASC device exhibits a high energy density 24.6 W h Kg^-1 at 797 W kg^-1 power density with an operating voltage of 1.6 V (vs Ag/AgCl). The device further shows good capacitance retention (90.1%) after 5000 cycles. This research shows the simple and cost-effective strategy to make metallic particles embedded 3D porous carbonaceous electrode materials which can have great potential for energy storage application.

Ionic Liquid-Controlled Growth of NiCo2 S4 3D Hierarchical Hollow Nanoarrow Arrays on Ni Foam for Superior Performance Binder Free Hybrid Supercapacitors

A significant development in the design of a NiCo₂ S₄ 3D hierarchical hollow nanoarrow arrays (HNA)-based supercapacitor binder free electrode assembled by 1D hollow nanoneedles and 2D nanosheets on a Ni foam collector through controlling ionic liquid 1-octyl-3-methylimidazolium chloride ([OMIm]Cl) concentration is reported. The unique NiCo₂ S₄ -HNA electrode acquires high specific capacity (1297 C g^-1 at 1 A g^-1 , 2.59 C cm^-2 at 2 mA cm^-2 ), excellent rate capability (maintaining 73.0% at 20 A g^-1 ), and long operational life (maintaining 92.4% after 10 000 cycles at 5 A g^-1 ), which are superior to those for 1D hollow nanoneedle arrays (HNN) and 2D porous nanoflake arrays (PNF). The outstanding electrochemical performance is attributed to the novel 3D structure with large specific surface, hollow cores, high porosity as well as stable architecture. In addition, a hybrid supercapacitor applying 3D NiCo₂ S₄ -HNA as the positive electrode and active carbon as the negative electrode exhibits a high energy density of 42.5 Wh kg^-1 at a power density of 2684.2 W kg^-1 in an operating voltage of 1.6 V. Robust cycling stability is also expressed with 84.9% retention after repeating 10 000 cycles at 5 A g^-1 , implying their great potential in superior-performance supercapacitors.

NiCo2S4 nanosheet-decorated 3D, porous Ni film@Ni wire electrode materials for all solid-state asymmetric supercapacitor applications

Wire type supercapacitors with high energy and power densities have generated considerable interest in wearable applications. Herein, we report a novel NiCo₂S₄-decorated 3D, porous Ni film@Ni wire electrode for high performance supercapacitor application. In this work, a facile method is introduced to fabricate a 3D, porous Ni film deposited on a Ni wire as a flexible electrode, followed by decoration with NiCo₂S₄ as an electroactive material. The fabricated NiCo₂S₄-decorated 3D, porous Ni film@Ni wire electrode displays a superior performance with an areal and volumetric capacitance of 1.228 F cm^-2 and 199.74 F cm^-3, respectively, at a current density of 0.2 mA cm^-1 with a maximum volumetric energy and power density (E_V: 6.935 mW h cm^-3; P_V: 1.019 W cm^-3). Finally, the solid state asymmetric wire type supercapacitor is fabricated using the fabricated NiCo₂S₄-decorated 3D, porous Ni film@Ni wire as a positive electrode and N-doped reduced graphene oxide (N-rGO) as a negative electrode and this exhibits good areal and volumetric capacitances of C_A: 0.12 F cm^-2 and C_V: 19.57 F cm^-2 with a higher rate capability (92%). This asymmetric wire type supercapacitor demonstrates a low leakage current and self-discharge with a maximum volumetric energy (E_V: 5.33 mW h cm^-3) and power (P_V: 855.69 mW cm^-3) density.