A novel dual-signal electrochemical sensor for bisphenol A determination by coupling nanoporous gold leaf and self-assembled cyclodextrin

Advances in the application of logic gates in nanozymes

Nanozymes are a class of nanomaterials with biocatalytic function and enzyme-like activity, whose advantages include high stability, low cost, and mass production. They can catalyze the substrates of natural enzymes based on specific nanostructures and serve as substitutes for natural enzymes. Their applied research involves a wide range of fields such as biomedicine, environmental governance, agriculture, and food. Molecular logic gates are a new cross-disciplinary discipline, which can simulate the function of silicon circuits on a molecular scale, perform single or multiple input logic operations, and generate logic outputs. A molecular logic gate is a binary operation that converts an input signal into an output signal according to the rules of Boolean logic, generating two signals, a high level, and a low level. The high and low levels represent the "true" and "false" values of the logic gates, and their outputs correspond to "l" and "0" of the molecular logic gates, respectively. The combination of nanozymes and logic gates is a novel and attractive research direction, and the cross-application of the two brings new opportunities and ideas for various fields, such as the construction of efficient biocomputers, intelligent drug delivery systems, and the precise diagnosis of diseases. This review describes the application of logic gates based on nanozymes, which is expected to provide a certain theoretical foundation for researchers' subsequent studies.

One-step electrosynthesis of Cu-Hemin MOFs/CNTs for the dual determination of glyphosate

A simple and efficient dual-signal electrochemical sensor was designed for glyphosate (GLYP) determination based on the one-step electro-synthesized Cu-Hemin MOFs/CNTs nanocrystals. Cu-Hemin MOFs/CNTs were directly modified on the electrode through electrodeposition, avoiding complicated synthesis and modification processes. The incorporation of CNTs greatly boosted the conductivity of Cu-Hemin MOFs and the sensitivity of the electrochemical sensor. Cu active sites in Cu-Hemin MOFs were converted to CuCl, allowing the specific detection of GLYP with the turn of CuCl into non-electroactive Cu-GLYP. Meanwhile, GLYP showed highly effective inhibition effect on the inherent peroxidase-like activity of Cu-Hemin MOFs, therefore generating the second electrochemical signal with Cu-Hemin MOFs-catalyzed o-phenylenediamine (o-PD) + H2O2 system. The Cu-Hemin MOFs/CNTs based sensor with two electrochemical signals showed good linearities of 1.0 × 10-10 M - 3.0 × 10-6 M and 1.0 × 10-10 M - 5.0 × 10-5 M, with detection limits of 5.17 × 10-12 M and 6.81 × 10-12 M for the CuCl signal based assay and nanozyme catalyzed o-PD + H2O2 procedure, respectively. This simple and robust dual-signal sensor with excellent selectivity, accuracy, and stability allowed GLYP quantification in real samples, highlighting the potential application of this approach for food and environmental monitoring.

Biomimetic Electrochemical Sensor Based on Single-Atom Nickel Laccase Nanoenzyme for Quercetin Detection

Laccase, a member of the copper oxidase family, has been used as a green catalyst in the environmental and biochemical industries. However, laccase nanoenzymes are limited to materials with copper as the active site, and noncopper laccase nanoenzymes have been scarcely reported. In this study, inspired by the multiple copper active sites of natural laccase and the redox Cu2+/Cu+ electron transfer pathway, a novel nitrogen/nickel single-atom nanoenzyme (N/Ni SAE) with high laccase-like activity was prepared by inducing Ni and dopamine precipitation through a controllable water/ethanol interface reaction. Compared with that of laccase, the laccase activity simulated by N/Ni SAE exhibited excellent stability and reusability. The N/Ni SAE exhibited a higher efficiency toward the degradation of 2,4-dichlorophenol, hydroquinone, bisphenol A, and p-aminobenzene. In addition, a sensitive electrochemical biosensor was constructed by leveraging the laccase-like activity of N/Ni SAE; this sensor offered unique advantages in terms of catalytic activity, selectivity, stability, and repeatability. Its detection ranges for quercetin were 0.01-0.1 and 1.0-100 μM, and the detection limit was 3.4 nM. It was also successfully used for the quantitative detection of quercetin in fruit juices. Therefore, the single-atom biomimetic nanoenzymes prepared in this study promote the development of a new electrochemical strategy for the detection of various bioactive molecules and show great potential for practical applications.

Advanced experimental techniques for the sensitive detection of a toxic bisphenol A using UiO-66-NDC/GO-based electrochemical sensor

In the present study, a simple and sensitive method for detecting bisphenol A (BPA) in various environments, including groundwater, was described using a widespread electrochemical method. BPA is well-known for its endocrine-disrupting properties, which may cause potential toxicological effects oon the nervous, reproductive, and immune systems. A novel metal-organic framework (UiO-66-NDC/GO) was synthesized, and its existence was confirmed by several characterization techniques like FTIR, UV-visible, XRD, SEM-EDX, Raman spectroscopy, and TGA. Due to the excellent electrocatalytic nature, UiO-66-NDC/GO was chosen as the sensor material and integrated on the surface of the bare carbon paste electrode (BCPE). The UiO-66-NDC/GO modified carbon paste electrode (MCPE) was engaged for the detection of BPA using techniques like cyclic Voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The applied sensor exhibited an astonishing outcome for BPA detection with high sensitivity and selectivity. The lower detection limit (LLOD) of 0.025 μM was achieved at the modified sensor with a linear concentration range of 10-70 μM. Moreover, the practical applicability of the sensor was tested on tap water, drinking water, and fresh liquid milk, giving an excellent recovery of BPA in the range of 94.8-99.3 (v.%). The proposed method could be employed for electrochemical device or a solid state device fabrication for the onsite monitoring of BPA.

Covalent organic framework modified carbon cloth for ratiometric electrochemical sensing of bisphenol A and S

A novel ratiometric electrochemical sensor was developed based on a carbon cloth electrodeposited with silver nanoparticles and drop-coated by covalent organic framework (COF-LZU1) for simultaneous determination of bisphenol A (BPA) and bisphenol S (BPS). Carbon cloth exhibited a significantly larger electrochemical active area than common glassy carbon electrodes (27.5 times). Silver nanoparticles not only provided a stable reference signal but also enhanced electroactivity for the oxidation of BPA and BPS. COF-LZU1 with good adsorption performance and large periodic π-arrays promoted the enrichment of BPA and BPS to further increase the current response. Compared with the traditional single-signal electrochemical sensor, the developed ratiometric sensor exhibited better reproducibility and a wider linear range for BPA and BPS from 0.5 to 100 μM with a limit of detection of 0.15 μM. Furthermore, the developed sensor showed excellent stability and superior anti-interference ability. The real sample analysis for BPA and BPS has been successfully carried out in mineral water, electrolyte drink, tea, juice, and beer with recoveries of 88.3-111.7%. The developed ratiometric sensor is expected to be a candidate for the preparation of other electrochemical sensors and the analysis of additional practical samples.

Dual-Fluorescent Nanoparticle Probes Consisting of a Carbon Nanodot Core and a Molecularly Imprinted Polymer Shell

Dual-fluorescent molecularly imprinted nanoparticles with a red-emissive carbon nanodot-doped silica core and a chlorogenic acid-imprinted fluorescent polymer layer are prepared and their use in ratiometric fluorometric analysis is described. Nanoparticle probes consisting of a shielded and stably emitting core and a shell with embedded binding sites that indicates the presence of an analyte with a change in emission allow for internally referenced measurements potentially accounting for detrimental influences from instrument drifts, light source fluctuations or sensor materials-related inhomogeneities.

Selective Molecular Recognition of Low Density Lipoprotein Based on β-Cyclodextrin Coated Electrochemical Biosensor

The excess of low-density lipoprotein (LDL) strongly promotes the accumulation of cholesterol on the arterial wall, which can easily lead to the atherosclerotic cardiovascular diseases (ACDs). It is a challenge on how to recognize and quantify the LDL with a simple and sensitive analytical technology. Herein, β-cyclodextrins (β-CDs), acting as molecular receptors, can bind with LDL to form stable inclusion complexes via the multiple interactions, including electrostatic, van der Waals forces, hydrogen bonding and hydrophobic interactions. With the combination of gold nanoparticles (Au NPs) and β-CDs, we developed an electrochemical sensor providing an excellent molecular recognition and sensing performance towards LDL detection. The LDL dynamic adsorption behavior on the surface of the β-CD-Au electrode was explored by electrochemical impedance spectroscopy (EIS), displaying that the electron-transfer resistance (Ret) values were proportional to the LDL (positively charged apolipoprotein B-100) concentrations. The β-CD-Au modified sensor exhibited a high selectivity and sensitivity (978 kΩ·µM⁻¹) toward LDL, especially in ultra-low concentrations compared with the common interferers HDL and HSA. Due to its excellent molecular recognition performance, β-CD-Au can be used as a sensing material to monitor LDL in human blood for preventing ACDs in the future.

da Silva Alves D, Okeke C, Breslin CB. Cyclodextrins as Supramolecular Recognition Systems: Applications in the Fabrication of Electrochemical Sensors

Supramolecular chemistry, although focused mainly on noncovalent intermolecular and intramolecular interactions, which are considerably weaker than covalent interactions, can be employed to fabricate sensors with a remarkable affinity for a target analyte. In this review the development of cyclodextrin-based electrochemical sensors is described and discussed. Following a short introduction to the general properties of cyclodextrins and their ability to form inclusion complexes, the cyclodextrin-based sensors are introduced. This includes the combination of cyclodextrins with reduced graphene oxide, carbon nanotubes, conducting polymers, enzymes and aptamers, and electropolymerized cyclodextrin films. The applications of these materials as chiral recognition agents and biosensors and in the electrochemical detection of environmental contaminants, biomolecules and amino acids, drugs and flavonoids are reviewed and compared. Based on the papers reviewed, it is clear that cyclodextrins are promising molecular recognition agents in the creation of electrochemical sensors, chiral sensors, and biosensors. Moreover, they have been combined with a host of materials to enhance the detection of the target analytes. Nevertheless, challenges remain, including the development of more robust methods for the integration of cyclodextrins into the sensing unit.

Latest Advances in Determination of Bisphenols with Nanomaterials, Molecularly Imprinted Polymers and Aptamer Based Electrochemical Sensors

Contamination of environmental sources such as soils, sediments and rivers and human exposure caused by several endocrine disrupting compounds (EDCs) are considered as the most challenging issues of today's world. EDCs cover a wide variety of compounds ranging from phthalates to parabens and bisphenols (BPs) are the leading group among them. BPs are widely used during the production of different plastic materials such as food and beverage containers, toys, medical equipment and baby bottles that we use in every aspect of our lives. BPs may migrate from those products to different media under certain conditions and this situation causes chronic exposure for humans and other creatures in the environment. Especially bisphenol A (BPA) and its other analogues such as bisphenol F, bisphenol S and tetrabromobisphenol that have similar structures and are preferred as alternatives to BPA cause harmful adverse effects such as endocrine disruption, neurotoxicity, genotoxicity and cytotoxicity. There are legal restrictions and prohibitions by the European Union (EU) in order to prevent possible harmful effects. Therefore, it is important to develop highly sensitive, fast, easy to use and cheap sensors for the determination of BPs in biological, environmental and commercial samples. Electrochemical sensors, which are one of the most widely, used analytical techniques, provide these conditions. Additionally, it is possible to enhance the performance of electrochemical sensors with nanomaterials, molecularly imprinted polymers or aptamer based technologies. This review aims to give comprehensive information about BPs with summarizing most recent applications of electrochemical sensors for their determination in different samples.

Facile covalent preparation of carbon nanotubes / amine-functionalized Fe3O4 nanocomposites for selective extraction of estradiol in pharmaceutical industry wastewater

As a typical steroid hormone drug, estradiol (E2) is also one of the most frequently detected endocrine disrupting chemicals (EDCs) in the aquatic environment. Herein, in response to the potential risk of E2 in steroid hormone pharmaceutical industry wastewater to human and wildlife, a novel carbon nanotubes / amine-functionalized Fe₃O₄ (CNTs/MNPs@NH₂) nanocomposites with magnetic responsive have been developed for the enrichment and extraction of E2 in pharmaceutical industry wastewater, where amino-functionalized Fe₃O₄ magnetic nanoparticles (MNPs@NH₂) were used as a magnetic source. The resultant CNTs/MNPs@NH₂ possessed both the features of CNTs and desired magnetic property, enabling to rapidly recognize and separate E2 from pharmaceutical industry wastewater. Meanwhile, the CNTs/MNPs@NH₂ had good binding behavior toward E2 with fast binding kinetics and high adsorption capacity, as well as exhibited satisfactory selectivity to steroidal estrogen compounds. Furthermore, the change of pH value of aqueous phase in adsorption solvent hardly affected the adsorption of E2 by CNTs/MNPs@NH₂, and the adsorption capacity of E2 ranged from 19.9 to 17.2 mg g^-1 in the pH range of 3.0 to 11.0, which is a latent advantage of the follow-up development method to detect E2 in pharmaceutical industry wastewater. As a result, the CNTs/MNPs@NH₂ serving as a solid phase extraction medium were successfully applied to efficiently extract E2 from pharmaceutical industry wastewater. Therefore, the CNTs/MNPs@NH₂ nanocomposites could be used as a potential adsorbent for removing steroidal estrogens from water. More importantly, the developed method would provide a promising solution for the monitoring and analysis of EDCs in pharmaceutical industry wastewater.

Pillar[6]arene-modified gold nanoparticles grafted on cellulose nanocrystals for the electrochemical detection of bisphenol A

The as-prepared CNCs@CP6-AuNP nanohybrid and its application in sensing BPA.

Detection of pollutants in water bodies: electrochemical detection or photo-electrochemical detection?

The massive discharge of pollutants including endocrine-disrupting chemicals (EDCs), heavy metals, pharmaceuticals and personal care products (PPCPs) into water bodies is endangering the ecological environment and human health, and needs to be accurately detected. Both electrochemical and photo-electrochemical detection methods have been widely used for the detection of these pollutants, however, which one is better for the detection of different environmental pollutants? In this feature article, different electrochemical and photo-electrochemical detection methods are summarized, including the principles, classification, common catalysts, and applications. By summarizing the advantages and disadvantages of different detection methods, this review provides a guide for other researchers to detect pollutants in water bodies by using electrochemical and photo-electrochemical analysis.

Novel electrochemical sensing platform based on ion imprinted polymer with nanoporous gold for ultrasensitive and selective determination of As3

An electrochemical sensor has been developed based on ion imprinted polymer (IIP) and nanoporous gold (NPG) modified gold electrode (IIP/NPG/GE) for determination of arsenic ion (As³⁺) in different kinds of water. NPG with high conductivity, large specific surface area, and high biocompatibility was prepared by a green electrodeposition method. Then a layer of IIP was synthesized in situ on NPG surface by electropolymerization, in which As³⁺ was used as template ion and o-phenylenediamine as functional monomer. We used potassium ferricyanide and potassium ferrocyanide chelates as electrochemical probes to generate signals. The electrochemical behavior of IIP/NPG/GE (vs. Ag/AgCl) was studied by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The linear range for As³⁺ was 2.0 × 10^-11 to 9.0 × 10^-9 M, and the lower detection limit was 7.1 × 10^-12 M (S/N = 3). This newly developed sensor has good stability and selectivity, and has been successfully applied to the As³⁺ determination of four kinds of water quality.

A pH sensitive thiolated β-cyclodextrin-modified nanoporous gold for controlled release of doxorubicin

This article reports a novel thiolated β-cyclodextrin (HS-β-CD) modified nanoporous gold (NPG) wire for pH sensitive delivery of doxorubicin (DOX) in controlled manner. Nanoporous gold is a versatile material because of its three-dimensional nanoscale network of pores, facile surface functionalization, biocompatibility, and high capacity for the DOX payload. HS-β-CD can form supramolecular inclusion complexes with DOX affording the possibility of altering the controlled release behavior. DOX is one of the most potent anti-tumor drugs used in the treatment of different cancers. The binding of HS-β-CD and DOX was examined using UV-Vis spectroscopy. The prepared NPG structure exhibited excellent properties for controlled drug release outlining the potential of a pH sensitive drug implant for biomedical applications. This delivery system could improve local targeting of the drug as well as alter the rate of release of DOX near tumors.

A robust electrochemical sensing based on bimetallic metal-organic framework mediated Mo2C for simultaneous determination of acetaminophen and isoniazid

Herein, a Mo₂C/bimetallic zeolitic imidazolate framework-modified glassy carbon electrode (Mo₂C@BMZIFs/GCE) was established as an electrochemical sensor for the simultaneous sensitive determination of acetaminophen (APAP) and isoniazid (INZ). The apparent morphology, structural composition, and electrochemical properties were comprehensively investigated. The outstanding electrocatalytic activity and conductivity endow the sensor desirable electrochemical performance toward APAP and INZ compared to the bare GCE, such as wide linear range, low detection limit, and high selectivity. Under the optimum conditions, a linear relationship between the oxidation peak current and the concentration of the measured object was obtained, with linear ranges from 0.1 to 300 μM for APAP and from 10 to 3500 μM for INZ. The detection limits for APAP and INZ were 0.03 μM and 1.5 μM, respectively. More importantly, the APAP and INZ oxidation peaks could be completely separated. Moreover, the highly sensitive and stable sensor was applied to detect APAP and INZ in human serum. This work can provide a viable route to rational design and construct electrochemical sensors for drug monitoring and clinical diagnosis.

Hydrothermal synthesis of NiFe2O4 nanoparticles as an efficient electrocatalyst for the electrochemical detection of bisphenol A

In this study, the sensitive and selective detection of bisphenol A (BPA) was achieved using a screen-printed carbon electrode (NFO/SPCE) modified with hydrothermally synthesized NiFe₂O₄ nanoparticles.

Ratiometric electrochemical aptasensor for ultrasensitive detection of Ochratoxin A based on a dual signal amplification strategy: Engineering the binding of methylene blue to DNA

A novel ratiometric electrochemical aptasensor was developed for Ochratoxin A (OTA) detection based on the binding of methylene blue (MB) to DNA with a dual signal amplification strategy. The formation of dsDNA structures between ferrocene-labeled complementary DNA (Fc-cDNA), the OTA aptamer, and complementary helper DNA (hDNA) caused Fc away from the electrode, and allowed dsDNA to bind with a certain amount of MB. Here, a small oxidation current of Fc (I_Fc) and a large oxidation current of MB (I_MB) were obtained. In the presence of OTA, its specific recognition with the aptamer induced the release of aptamer and hDNA from the electrode and subsequently the formation of hairpin structure for cDNA, which caused Fc close to the electrode and a weaker binding ability with MB. Then, an increased I_Fc and a decreased I_MB were obtained. Based on this principle, OTA could be accurately quantified by measuring the ratiometric signal of I_Fc/I_MB. Herein, the dual signal amplification strategy of the introduction of hDNA and the binding with MB after the OTA recognition was exploited to amplify the response signal. The obtained aptasensor showed a linear detection range from 10 pg mL^-1 to 10 ng mL^-1 and a detection limit of 3.3 pg mL^-1. The aptasensor was successfully applied to determine OTA in wheat, and the results were validated through HPLC-MS. Furthermore, by changing the target aptamers, this strategy could be universally used for the determination of various mycotoxins, showing promising potential applications for mycotoxins monitoring in agricultural products and foods.

A novel electrochemical sensor for determination of hydroxyl radicals in living cells by coupling nanoporous gold layer with self-assembled 6-(Ferrocenyl) hexanethiol

The detection of hydroxyl radicals (•OH) in live cells is significant to study its physiological and pathological roles, while it is full of challenge due to the extremely low concentration and short lifetime of •OH. Herein, we have developed a novel electrochemical sensor based on 6-(Ferrocenyl) hexanethiol (6-FcHT) self-assembled nanoporous gold layer (NPGL) modified GE (6-FcHT/NPGL/GE), which can detect the release of •OH from living cells with high sensitivity and selectivity. The superior sensitivity can stem from the unique porous architecture of NPGL, which enlarged electrode surface area and expedited electron transportation during electrochemical reactions. Additionally, NPGL provides more active binding sites for the assembly of capture agent (6-FcHT) of •OH, thus ensuring high selectivity. For comparison, 6-FcHT/GE was applied to detect •OH, and the obtained sensitivity was 0.0305 mA nM^-1 and detection limit was 0.133 nM in the linear range of 0.4 nM-70 nM. After modification of NPGL, the sensitivity of 6-FcHT/NPGL/GE to the •OH response was increased to 0.1364 mA nM^-1, detection limit was reduced to 0.316 pM and the linear range was extended from 1 pM to 100 nM. It is worth mentioning that a plenty of extra merits has also been validated like reproducibility, repeatability and stability, enabling to direct electrochemical detection of •OH in HepG2 cells.

A novel electrochemical sensor based on molecularly imprinted polymer modified hollow N, S-Mo2C/C spheres for highly sensitive and selective carbendazim determination

A novel electrochemical sensor based on nitrogen and sulfur doped hollow Mo₂C/C spheres (N, S-Mo₂C) and molecularly imprinted polymer (MIP) was proposed for carbendazim (CBD) determination. The N, S-Mo₂C were prepared by first nitrogen and sulfur doping via one-pot method and subsequent carbonization at high temperature. A film of MIP was then fabricated in situ on the N, S-Mo₂C surface by electropolymerization, with CBD acting as template molecule and o-phenylenediamine as functional monomer. The N, S-Mo₂C were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and electrochemical behaviors of CBD on differently modified electrodes were explored by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, a calibration curve of current shift versus the logarithm of CBD concentration was obtained in the range of 1×10^-12 ∼ 8×10^-9 M with a detection limit of 6.7×10^-13 M (S/N=3). Moreover, the proposed sensor exhibited favorable stability and selectivity, and was applied to analyze pesticide residues in fruits and vegetables with decent accuracy.

An electrochemical aptasensor based on eATRP amplification for the detection of bisphenol A

Herein, a novel aptasensor was constructed for ultrasensitive detection of bisphenol A (BPA). In this method, an electrochemically mediated atom transfer radical polymerization (eATRP) signal amplification strategy was applied to BPA detection for the first time. The 5'-end modified sulfhydryl group and the 3'-end modified azide group hairpin DNA were immobilized on a gold electrode through an Au-S bond. The double-stranded DNA was formed by the hybridization of an aptamer and a single-stranded DNA partially paired with the hairpin DNA. In the presence of BPA, the aptamer combined with BPA and the single-stranded DNA was released to open the hairpin structure, making the azide groups at the 3' end exposed. Subsequently the initiator of eATRP was introduced into hairpin DNA through click chemistry reaction and eATRP was conducted for the polymerization of the electroactive probe ferrocene methyl methacrylate (FMMA). As a result, the ultrasensitive detection of BPA was realized, and the detection limit of this aptasensor was as low as 59 aM and a good selectivity was obtained in the presence of 100-fold structural analogs. The application of this aptasensor was evaluated by detecting BPA in pure water samples, and recoveries were in the range of 95.23-98.40%, holding promising applications in biological analysis.

Sandwich-type electrochemical immunosensor constructed using three-dimensional lamellar stacked CoS2@C hollow nanotubes prepared by template-free method to detect carcinoembryonic antigen

Effective treatment of cancer depends on early detection of tumor markers. In this paper, an effective template-free method was used to prepare CoS₂@C three-dimensional hollow sheet nanotubes as the matrix of the immunosensor. The unique three-dimensional hybrid hollow tubular nanostructure provides greater contact area and enhanced detection limit. The CoS₂@C-NH₂-HRP nanomaterial was synthesized as a marker and had a high specific surface area, which can effectively improve the electrocatalytic ability of hydrogen peroxide (H₂O₂) reduction while increasing the amount of capture-fixed carcinoembryonic antigen antibody (anti-CEA). In addition, the co-bonded horseradish peroxidase (HRP) can further promote the redox of H₂O₂ and amplify the electrical signal. Carcinoembryonic antigen (CEA) was quantified by immediate current response (i-t), and the prepared immunosensor had good analytical performance under optimized conditions. The current signal and the concentration of CEA were linear in the range of 0.001-80 ng/mL, and the detection limit was 0.33 pg/mL (S/N = 3). The designed immunosensor has good selectivity, repeatability and stability, and the detection of human serum samples shows good performance. Furthermore, electrochemical immunosensor has broad application prospects in the clinical diagnosis of CEA.

One-step synthesis of reduced graphene oxide sheathed zinc oxide nanoclusters for the trace level detection of bisphenol A in tissue papers

After a long-term toxicity study on Bisphenol A (BPA), the European Union and U.S food and drug administration updating the rules regarding the usage of BPA by extending the prohibition of BPA to include in the production of papers, on February 2018. Therefore, it is essential to establish the trace level BPA detectors in paper samples. In this report, the synthesis of novel ZnO nanoclusters wrapped with reduced graphene oxide (ZnO NCs/rGO) and its application towards the selective electrocatalytic detection of BPA are described. Initially, ZnO NCs/rGO is synthesized by the one-step hydrothermal approach, and various characterizations explain the compound's compositions and structure. The significance of ZnO NCs/rGO together with good electrocatalytic properties leads this material to the platform for electrochemical sensor. Finally, ZnO NCs/rGO was fabricated and validated as an effective sensor for the sensitive detection of BPA. The demonstrated sensor revealed excellent detection of BPA with the very low detection limit (2.1 nM), and also it offered good analytical parameters with more extensive linear range and higher sensitivity. Likewise, the sensor annexes good durability, reproducibility, and selectivity towards the determination of BPA. Due to the nourishing capacity of the prepared ZnO NCs/rGO, it is employed for the detection of BPA in tissue paper samples.