Self-supporting ethyl cellulose/poly(vinylidene fluoride) blended gel polymer electrolyte for 5 V high-voltage lithium-ion batteries

Application of cellulose/poly(vinylidene fluoride) blend films as polymer electrolytes in lithium ion batteries

Polymer electrolytes are the most promising replacement for liquid electrolytes in lithium ion batteries (LIBs) due to their unique properties. Beside this, polymer blends are usually used as polymer electrolytes to achieve expectable properties including properties of each component. In this study, cellulose/poly(vinylidene fluoride) (PVDF) blend films are prepared via solution casting at different weight ratios. To investigate phase behavior of binary system, the thermodynamic interaction parameter of Flory-Huggings is evaluated. The X-ray diffraction spectroscopy (XRD) analysis is conducted to investigate the structural properties of samples. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) analyses were performed to study thermal behaviors. Mechanical properties are investigated by tensile test and electrochemical properties such as electrochemical impedance spectroscopy (EIS), linear sweep voltammetry (LSV), and chronoamperometry are studied. The results and morphology of these blends showed phase separation of two polymers. This phase separation led to the creation of free volume, which is a path for ion transfer; therefore, the ion conductivity was obtained in the range of 10-4 S cm-1. In addition, high transfer number (0.41 < t+ < 0.97), wide electrochemical stability window (>5 V), acceptable charge capacity (>200 mAh/g at 0.2C), and long cycle stability was achieved.

Diagnostic Protocols for Evaluating the Degradation Mechanisms in Gel-Polymer Lithium Batteries

Gel polymer electrolytes (GPEs) present a promising alternative to standard liquid electrolytes (LE) for Lithium-ion Batteries (LIBs) and Lithium Metal Batteries bridging the advantages of both liquid and solid polymer electrolytes. However, their cycle life still lags behind that of standard LIBs, and their degradation mechanisms remain poorly understood. A significant challenge is the need for specific diagnostic protocols to systematically study the degradation mechanisms of GPE-based cells. Challenges include the separation of cell components and effective washing, as well as the study of the solid electrolyte interfaces, all complicated by the semi-solid nature of GPEs. This paper provides a brief review of existing literature and proposes a comprehensive set of diagnostic tools for dismantling and evaluating the degradation of GPE-based LIBs. Finally, these methods and recommendations are applied to LiNi0.5Mn1.5O4 (LNMO)-graphite cells, revealing electrolyte oxidation as a major source of cell degradation.

PVDF-HFP via Localized Iodization as Interface Layer for All-Solid-State Lithium Batteries with Li6PS5Cl Films

All-solid lithium (Li) metal batteries (ASSLBs) with sulfide-based solid electrolyte (SEs) films exhibit excellent electrochemical performance, rendering them capable of satisfying the growing demand for energy storage systems. However, challenges persist in the application of SEs film owing to their reactivity with Li metal and uncontrolled formation of lithium dendrites. In this study, iodine-doped poly(vinylidenefluoride-hexafluoropropylene) (PVDF-HFP) as an interlayer (PHI) to establish a stable interphase between Li metal and Li6PS5Cl (LPSCl) films is investigated. The release of I ions and PVDF-HFP produces LiI and LiF, effectively suppressing lithium dendrite growth. Density functional theory calculations show that the synthesized interlayer layer exhibits high interfacial energy. Results show that the PHI@Li/LPSCl film/PHI@Li symmetrical cells can cycle for more than 650 h at 0.1 mA cm-2. The PHI@Li/LPSCl film/NCM622 cell exhibits a distinct enhancement in capacity retention of ≈26% when using LiNi0.6Mn0.2Co0.2O2 (NCM622) as the cathode, compared to pristine Li metal as the anode. This study presents a feasible method for producing next-generation dendrite-free SEs films, promoting their practical use in ASSLBs.

Stabilizing Lithium Metal Batteries by Synergistic Effect of High Ionic Transfer Separator and Lithium-Boron Composite Material Anode

The development of lithium (Li) metal batteries (LMBs) has been limited by problems, such as severe dendrite growth, drastic interfacial reactions, and large volume change. Herein, an LMB (8AP@LiB) combining agraphene oxide-poly(ethylene oxide) (PEO) functionalized polypropylene separator (8AP) with a lithium-boron (LiB) anode is designed to overcome these problems. Raman results demonstrate that the PEO chain on 8AP can influence the Li+ solvation structure in the electrolyte, resulting in Li+ homogeneous diffusion and Li+ deposition barrier reduction. 8AP exhibits good ionic conductivity (4.9 × 10-4 S cm-1), a high Li+ migration number (0.88), and a significant electrolyte uptake (293%). The 3D LiB skeleton can significantly reduce the anode volume changes and local current density during the charging/discharging process. Therefore, 8AP@LiB effectively regulates the Li+ flux and promotes the uniform Li deposition without dendrites. The Li||Li symmetrical cells of 8AP@LiB exhibit a high electrochemical stability of up to 1000 h at 1 mA cm-2 and 5 mAh cm-2. Importantly, the Li||LiFePO4 full cells of 8AP@LiB achieve an impressive 2000 cycles at 2C, while maintaining a high-capacity retention of 86%. The synergistic effect of the functionalized separator and LiB anode might provide a direction for the development of high-performance LMBs.

Suppressing Dendrite Growth with Eco-Friendly Sodium Lignosulfonate Additive in Quasi-Solid-State Li Metal Battery

The application of lithium metal batteries is limited by the drawbacks of safety problems and Li dendrite formation. Quasi-solid-state electrolytes (QSSEs) are the most promising alternatives to commercial liquid electrolytes due to their high safety and great compatibility with electrodes. However, Li dendrite formation and the slow Li+ diffusion in QSSEs severely hinder uniform Li deposition, thus leading to Li dendrite growth and short circuits. Herein, an eco-friendly and low-cost sodium lignosulfonate (LSS)-assisted PVDF-based QSSE is proposed to induce uniform Li deposition and inhibit Li dendrite growth. Li symmetric cells with 5%-LSS QSSE possess a high Li+ transfer number of 0.79, and they exhibit a long cycle life of 1000 h at a current density/areal capacity of 1 mA cm-2/5 mAh cm-2. Moreover, due to the fast electrochemical dynamics endowed by the improved compatibility of the electrodes and fast Li+ diffusion, the LFP/5%-LSS/Li full cells still maintain a high capacity of 110 mAh g-1 after 250 cycles at 6C. This work provides a novel and promising choice that uses eco-friendly LSS as an additive to PVDF-based QSSE in Li metal batteries.

Substantial Proton Ion Conduction in Methylcellulose/Pectin/Ammonium Chloride Based Solid Nanocomposite Polymer Electrolytes: Effect of ZnO Nanofiller

In this research, nanocomposite solid polymer electrolytes (NCSPEs) comprising methylcellulose/pectin (MC/PC) blend as host polymer, ammonium chloride (NH₄Cl) as an ion source, and zinc oxide nanoparticles (ZnO NPs) as nanofillers were synthesized via a solution cast methodology. Techniques such as Fourier transform infrared (FTIR), electrical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV) were employed to characterize the electrolyte. FTIR confirmed that the polymers, NH₄Cl salt, and ZnO nanofiller interact with one another appreciably. EIS demonstrated the feasibility of achieving a conductivity of 3.13 × 10⁻⁴ Scm⁻¹ for the optimum electrolyte at room temperature. Using the dielectric formalism technique, the dielectric properties, energy modulus, and relaxation time of NH₄Cl in MC/PC/NH₄Cl and MC/PC/NH₄Cl/ZnO systems were determined. The contribution of chain dynamics and ion mobility was acknowledged by the presence of a peak in the imaginary portion of the modulus study. The LSV measurement yielded 4.55 V for the comparatively highest conductivity NCSPE.

Li-N Interaction Induced Deep Eutectic Gel Polymer Electrolyte for High Performance Lithium-Metal Batteries

As emerging eutectic mixtures, deep eutectic electrolytes (DEEs) show unique properties for Li-metal batteries (LMBs). However, the limited choice and inferior electrode compatibility hinder their further development in LMBs. Herein, we report a new 1,2-dimethylimidazole (DMIm)-based deep eutectic gel polymer electrolyte induced by Li-N interaction. We demonstrate that incorporating electron-withdrawing polyvinylidene difluoride (PVDF) polymer into the DMIm-based DEE changes the coordination environment of Li⁺ ions, leading to a high transference number of Li⁺ ions (0.65) and superior interface stability between the electrolyte and Li anode. The deep eutectic gel polymer electrolyte exhibits excellent non-flammability, high ionic conductivity (1.67 mS cm^-1 at 30 °C), and high oxidation voltage (up to 4.35 V vs. Li/Li⁺ ). The Li||LFP cell based on the newly developed deep eutectic gel polymer electrolyte can achieve superior long-term cycling stability at a wide range of rates.

Frontier Orbital Energy-Customized Ionomer-Based Polymer Electrolyte for High-Voltage Lithium Metal Batteries

The development of gel polymer electrolytes (GPEs) is considered to be an effective strategy to drive practical applications of high-voltage lithium metal batteries (HLMBs). However, rare GPEs that can satisfy the demands of HLMBs have been developed because of the limited compatibility with lithium anodes and high-voltage cathodes simultaneously. Herein, a novel strategy for constructing polymer matrixes with a customized frontier orbital energy for GPEs is proposed. The as-investigated polymer matrix (P(CUMA-NPF₆))-based GPE (P(CUMA-NPF₆)-GPE) obtained via in situ random polymerization delivers a wide voltage window (0-5.6 V vs Li⁺/Li), large lithium-ion transference number (t_Li⁺, 0.61), and superior electrode/electrolyte interface compatibility. It is to be noted that such a t_Li⁺ of P(CUMA-NPF₆)-GPE, which is one of the largest t_Li⁺ among high-voltage GPEs in a fair comparison, results from the high dissociation of lithium salts and effective anion immobilization abilities of P(CUMA-NPF₆). Ultimately, the as-assembled HLMB delivers more enhanced cycle performance than its counterpart of commercial liquid electrolytes. It is also demonstrated that P(CUMA-NPF₆) can scavenge the active PF₅ intermediate generated in the electrolyte at the anode side, thus suppressing the PF₅-mediated decomposition reaction of carbonates. This work will enlighten the rational structure design of GPEs for HLMBs.

A Heat-Resistant Poly(oxyphenylene benzimidazole)/Ethyl Cellulose Blended Polymer Membrane for Highly Safe Lithium-Ion Batteries

A blended membrane based on poly(oxyphenylene benzimidazole) (PBI) and ethyl cellulose (EC) exhibits heat resistance and good electrochemical performance. The prepared blended polymer gel membranes show no visible dimensional change after being held at 350 °C for 30 min, whereas the polyethylene (PE) separator almost completely melts. In addition to excellent thermal stability, the self-supporting blended membranes also exhibit a uniform thermal distribution during the heating process from 60 to 200 °C. Additionally, the ionic conductivities of the PBI/EC blended membranes with different ratios are 1.24 mS cm^-1 (1:1), 2.58 mS cm^-1 (1:2), and 1.68 mS cm^-1 (1:3), which are much higher than those of the PE separator (0.39 mS cm^-1). Compared to that of the PE separator (113 mAh g^-1), the cell with a separator of PBI/EC = 1:2 retained a discharge capacity of 131 mAh g^-1 after 150 cycles at 0.5C. Meanwhile, the rate performance of the cell was also better than that of the PE separator, especially at high currents (5C). All of the results indicate that this blended polymer gel membrane with good thermal stability is expected to be applied to high-performance lithium-ion batteries.