N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

The Application of Porous Carbon Derived from Furfural Residue as the Electrode Material in Supercapacitors

Resource use is crucial for the sustainable growth of energy and green low-carbon applications since the improper handling of biomass waste would have a detrimental effect on the environment. This paper used nano-ZnO and ammonium persulfate ((NH4)2S2O8, APS) as a template agent and heteroatom dopant, respectively. Using a one-step carbonization process in an inert atmosphere, the biomass waste furfural residue (FR) was converted into porous carbon (PC), which was applied to the supercapacitor electrode. The impact of varying APS ratios and carbonization temperatures on the physicochemical properties and electrochemical properties of PC was studied. O, S, and N atoms were evenly distributed in the carbon skeleton, producing abundant heteroatomic functional groups. The sample with the largest specific surface area (SSA, 855.62 m2 g-1) was made at 900 °C without the addition of APS. With the increase in adding the ratio of APS, the SSA and pore volume of the sample were reduced, owing to the combination of APS and ZnO to form ZnS during the carbonization process, which inhibited the pore generation and activation effect of ZnO and damaged the pore structure of PC. At 0.5 A g-1 current density, PC900-1 (FR: ZnO: APS ratio 1:1:1, prepared at 900 °C) exhibited the maximum specific capacitance of 153.03 F g-1, whereas it had limited capacitance retention at high current density. PC900-0.1 displayed high specific capacitance (141.32 F g-1 at 0.5 A g-1), capacitance retention (80.7%), low equivalent series resistance (0.306 Ω), and charge transfer resistance (0.145 Ω) and showed good rate and energy characteristics depending on the synergistic effect of the double layer capacitance and pseudo-capacitance. In conclusion, the prepared FR-derived PC can meet the application of a supercapacitor energy storage field and realize the resource and functional utilization of biomass, which has a good application prospect.

Synthesis and Electrochemical Characterization of ZnMoS4 Nanorods on Nickel Foam Substrate for Advanced Hybrid Supercapacitor Applications

A single-step hydrothermal method was utilized to grow ZnMoS4 (ZMS) nanorods uniformly. Initially, [MoS4]2- and Zn2+ ions interacted to create active nucleation centers, which then led to the formation of primary particles. These particles then underwent spontaneous aggregation and self-assembly on the nickel foam (NF) substrate, which served as a superior 3D interconnecting network template. This aggregation occurred nearly perpendicular to the NF and promoted the uniform growth of ZMS nanorods. The nanorods structure ensures efficient and rapid electrolyte accessibility and ion diffusion, resulting in an increased specific capacitance (Cs) of 2,116 Fg1- (846.4 C g-1) at 1 A g-1 and maintaining about 90% of their capacitance after 10,000 cycles of galvanic charge-discharge (GCD). In a hybrid supercapacitor configuration, ZMS@NF//AC@NF achieved a peak specific power of 7.2 kW.kg-1 and a specific energy of 40.3 Wh.kg-1. Remarkably, it preserved 93% of its initial capacitance after more than 20,000 cycles. These findings affirm the potential of binder-free ZMS nanorods as effective positive electrodes in advanced hybrid supercapacitors.

Polyphosphazene-derived carbon modified nanowires for high-performance electrochemical energy storage

Two one-dimensional nanowires, Fe3O4and MnO2nanowires, were modified with polyphosphazene-derived carbon (PZSC) usingin situpolymerization and high-temperature calcination methods. PZSC coated with MnO2nanowire (MnO2/PZSCNW) was designed as the positive electrode, while PZSC coated with Fe3O4nanowire (Fe3O4/PZSCNW) was designed as the negative electrode. Both MnO2/PZSCNW (+) and Fe3O4/PZSCNW (-) exhibit much larger specific capacities than the corresponding MnO2and Fe3O4nanowires, reaching 75.5 mAh g-1and 75.9 mAh g-1, respectively. The maximum specific capacity, power and energy density of MnO2/PZSCNW (+)//Fe3O4/PZSCNW (-) in alkaline electrolyte are up to 63.2 mAh g-1, 429.6 W kg-1and 53.7 Wh kg-1, respectively. After 10 000 cycles, the cell maintains 100% capacity. The experimental results indicate that the polyphosphazene-derived carbon coating can significantly improve the electrochemical performance, providing a feasible solution for constructing high-performance supercapacitors.

Versatile Synthesis of Carbon Materials using Protic Ionic Liquids and Salts as Precursors

Carbon materials (CMs) hold immense potential for applications across a wide range of fields. However, current precursors often confront limitations such as low heteroatom content, poor solubility, or complicated preparation and post-treatment procedures. Our research has unveiled that protic ionic liquids and salts (PILs/PSs), generated from the neutralization of organic bases with protonic acids, can function as economical and versatile small-molecule carbon precursors. The resultant CMs display attractive features, including elevated carbon yield, heightened nitrogen content, improved graphitic structure, robust thermal stability against oxidation, and superior conductivity, even surpassing that of graphite. These properties can be elaborate modulated by varying the molecular structure of PILs/PSs. In this Personal Account, we summarize recent developments in PILs/PSs-derived CMs, with a particular focus on the correlations between precursor structure and the physicochemical properties of CMs. We aim to impart insights into the foreseeable controlled synthesis of advanced CMs.

Highly active N, S Co-Doped Ultramicroporous Carbon for High-Performance Supercapacitor Electrodes

N, S-doped ultramicroporous carbons (NSUC-x) with a high nitrogen/sulfur content and a narrow pore-size distribution of around 0.55 nm were firstly prepared using L-cysteine as a nitrogen and sulfur source. The phase, graphitization degree, morphology, specific surface area, pore structure and surface condition of NSUC-x are investigated to analyze the key role in electrochemical performance. Such an ultramicroporous structure and N, S doping not merely provide a high-specific surface area and a suitable pore size, but also induce a good wettability for the fast transport and adsorption of electrolyte ions. Due to the above strategies, the typical NSUC-0.4 exhibits a high gravimetric capacitance of 339 F g⁻¹ at 0.5 A g⁻¹ as well as a capacity retention of 91.6% after 10,000 cycles in a three-electrode system using a 6 M KOH electrolyte. More attractively, a NSUC-0.4-assembled symmetrical supercapacitor delivers an energy output of 7.4 Wh kg⁻¹ at 100 W kg⁻¹ in 6 M KOH as well as a capacity retention of 92.4% after 10,000 cycles, indicating its practical application prospect. Our findings open up new prospects for the design and electrochemical application of N, S-doped ultramicroporous carbons.

Fabrication of resorcinol-based porous resin carbon material and its application in aqueous symmetric supercapacitors

Carbon materials with porous structures with their unique surface area and charge transport properties have been attracting significant attention as electrode materials in renewable energy storage devices. The rapid agglomeration of layered materials during electrochemical processes reduces their shelf life and specific capacitance, which can be prevented by the introduction of suitable pores between the layers. In this study, resorcinol-based porous resin carbon was facilely prepared via a simple carbonization of the potassium salts of resorcinol-potassium resin. The morphology, structure and surface properties of the carbon materials were investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption and energy dispersive spectroscopy (EDS). It is proposed that the fast nucleophilic addition between the phenols and formaldehyde produces nano-sized gel particles, followed by carbonization into carbon particles, finally packing to the mesopores. Due to the synergistic effects of the tailored porosity and O-doping, the prepared carbon materials show a high specific capacitance (198 F g⁻¹ for RC700), good capacitance retention (96.5% for RC700) at 2 A g⁻¹ in 6 M KOH and the specific area of RC700 is 540 m² g⁻¹.

Activated preparation of environmentally friendly and sustainable carbon materials and their successful application in supercapacitor devices.

Palladated Nanocomposite of Halloysite-Nitrogen-Doped Porous Carbon Prepared from a Novel Cyano-/Nitrile-Free Task Specific Ionic Liquid: An Efficient Catalyst for Hydrogenation

A novel nitrile-/cyano-free ionic liquid was synthesized and carbonized under two different carbonization methods in the presence of ZnCl₂ as a catalyst to afford N-doped carbon materials. It was found that the carbonization condition could affect the nature and textural properties of the resulting carbon. In the following, ionic liquid-derived carbon was hybridized with naturally occurring halloysite nanotubes via two procedures, that is, hydrothermal treatment of halloysite and as-prepared carbon and carbonization of ionic liquid in the presence of halloysite. The two novel nanocomposites were then used for stabilizing Pd nanoparticles. Examining the structures and catalytic activities of the resulting catalysts for the hydrogenation of nitroarenes in aqueous media showed that the carbonization procedure and hybridization method could affect the structure and the catalytic activity of the catalysts and hydrothermal approach, in which the structure of halloysite is preserved, leading to the catalyst with superior catalytic activity.

S-Doped Carbon Fibers Uniformly Embedded with Ultrasmall TiO2 for Na+ /Li+ Storage with High Capacity and Long-Time Stability

Building a rechargeable battery with high capacity, high energy density, and long lifetime contributes to the development of novel energy storage devices in the future. Although carbon materials are very attractive anode materials for lithium-ion batteries (LIBs), they present several deficiencies when used in sodium-ion batteries (SIBs). The choice of an appropriate structural design and heteroatom doping are critical steps to improve the capacity and stability. Here, carbon-based nanofibers are produced by sulfur doping and via the introduction of ultrasmall TiO₂ nanoparticles into the carbon fibers (CNF-S@TiO₂ ). It is discovered that the introduction of TiO₂ into carbon nanofibers can significantly improve the specific surface area and microporous volume for carbon materials. The TiO₂ content is controlled to obtain CNF-S@TiO₂ -5 to use as the anode material for SIBs/LIBs with enhanced electrochemical performance in Na⁺ /Li⁺ storage. During the charge/discharge process, the S-doping and the incorporation of TiO₂ nanoparticles into carbon fibers promote the insertion/extraction of the ions and enhance the capacity and cycle life. The capacity of CNF-S@TiO₂ -5 can be maintained at ≈300 mAh g^-1 over 600 cycles at 2 A g^-1 in SIBs. Moreover, the capacity retention of such devices is 94%, showing high capacity and good stability.

In situ growth of ZIF-8-derived ternary ZnO/ZnCo2O4/NiO for high performance asymmetric supercapacitors

In this paper, the rational design and synthesis of ZIF-8-derived ternary ZnO/ZnCo₂O₄/NiO wrapped by nanosheets is introduced. Polyhedral ternary ZnO/ZnCo₂O₄/NiO composites surrounded by nanosheets with different compositions are successfully fabricated through in situ growth on ZIF-8 templates and subsequent thermal annealing in air. Electrochemical investigation reveals that when the molar ratio of nickel nitrate to cobalt nitrate is 1, the composite material is more outstanding, which shows a high specific capacitance of 1136.4 F g^-1 at 1 A g^-1 and excellent cycling stability of 86.54% after 5000 cycles. Moreover, the excellent performance of this material is also confirmed by assembling an asymmetric supercapacitor. The assembled hybrid device can reach a large potential range of 0-1.6 V and deliver a high energy density of 46.04 W h kg^-1 as well as the maximum power density of 7987.5 W kg^-1.

Fabrication of double-shell hollow NiO@N-C nanotubes for a high-performance supercapacitor

Rational fabrication of carbon-based materials hybridized with transition-metal oxides is crucial for the design of supercapacitor electrodes with superior properties.

Shape-controlled synthesis of porous carbons for flexible asymmetric supercapacitors

N-Doped carbon nanomaterials have gained tremendous research interest in energy storage because of their high capacitance and chemical stability. Here, N-doped porous carbons (NPCs) with multiple shape-controlled and tunable morphologies are developed through a direct one-step pyrolysis/activation method. Typically, NPC-700-1, which is 5 nm thick and 6 μm wide, shows a high surface area (1591.5 m2 g-1) and hierarchical micro-, meso-, and macroporous architecture. The maximum specific capacitance of the as-prepared carbon nanosheets is 406 F g-1 at 1 A g-1 in KOH electrolyte. Moreover, flexible all-solid-state asymmetric supercapacitor devices assembled from NPCs and NiCo2O4 deliver a superior energy density of 42.7 W h kg-1 at 794.6 W kg-1, and good cycling ability (94% after 10 000 cycles). All the results suggest that NPCs have great potential for high performance wearable electronics and energy storage devices.

Facile Synthesis of Nitrogen-Doped Microporous Carbon Spheres for High Performance Symmetric Supercapacitors

Nitrogen-doped microporous carbon spheres (NMCSs) are successfully prepared via carbonization and KOH activation of phenol-formaldehyde resin polymer spheres synthesized by a facile and time-saving one-step hydrothermal strategy using triblock copolymer Pluronic F108 as a soft template under the Stöber-like method condition. The influence of the ethanol/water volume ratios and carbonation temperatures on the morphologies, pore structures and electrochemical performances of the prepared NMCSs are investigated systematically. The optimal NMCSs have a large specific surface area of 1517 m2 g- 1 with a pore volume of 0.8 cm3 g- 1. The X-ray photo-electron spectroscopy analysis reveals a suitable nitrogen-doped content of 2.6 at.%. The as-prepared NMCSs used as supercapacitor electrode materials exhibit an outstanding specific capacitance of 416 F g- 1 at a current density of 0.2 A g- 1, also it shows an excellent charge/discharge cycling stability with 96.9% capacitance retention after 10,000 cycles. The constructed symmetric supercapacitors using PVA/KOH as the gel electrolyte can deliver a specific capacitance of 60.6 F g- 1 at current density of 1 A g- 1. A maximum energy density of 21.5 Wh kg- 1 can be achieved at a power density of 800 W kg- 1, and the energy density still maintains 13.3 Wh kg- 1 even at a high power density of 16 kW kg- 1. The results suggest that this work can open up a facile and effective way to synthesize the NMCSs for electrode materials of high performance energy storage devices.

Controlled Synthesis of Carbon Nanospheres via the Modulation of the Hydrophilic Length of the Assembled Surfactant Micelles

A co-polymerization-carbonization method was employed to synthesize porous carbon nanospheres (PCNSs) using pyrrole-aniline polymers as a carbon source and alkyl phenol non-ionic surfactants as templates. The effect of the hydrophilic length on the carbon nanosphere size was systematically investigated. The so-prepared PCNSs were characterized via high-magnification scanning electron microscopy, dynamic light scattering (DLS) analysis, and N₂ adsorption and desorption analysis. The results indicate that the obtained nanosphere diameter can be tuned by changing the length of the hydrophilic groups. The length of the hydrophilic groups mainly affects the size of the vesicles or micelles formed by the assembly of the surfactant in solution, as was verified by the DLS results. After activation by KOH, the typical sample EO(30)-PCNS has a high specific surface area of 2137 m²/g and a large pore volume of 1.76 cm³/g. Electrochemical tests in 6 M KOH demonstrated that the assembled EO(30)-PCNS supercapacitor electrode displays good capacitive properties, such as a high specific capacitance of 221 F/g at 1.0 A/g and a good rate capacity of 68% retention at 10.0 A/g. This finding suggests that the uniform particle shape and high specific surface area are beneficial for the ion transportation, leading to good electrochemical performances. Our work provides a novel synthetic strategy for the fabrication of carbon nanospheres or other nanosphere materials for the construction of high-performance supercapacitors by optimizing few parameters, such as the length of the hydrophilic or hydrophobic groups of the surfactants.

NiO/NixCo3−xO4 porous ultrathin nanosheet/nanowire composite structures as high-performance supercapacitor electrodes

The demand for a new generation of high-safety, long-lifespan, and high-capacity power sources increases rapidly with the growth of energy consumption in the world. Here we report a facile method for preparing architecture materials made of NiO/Ni_xCo_3−xO₄ porous nanosheets coupled with NiO/Ni_xCo_3−xO₄ porous nanowires grown in situ on nickel foams using a hydrothermal method without any binder followed by a heat treatment process. The nanosheet-shaped NiO/Ni_xCo_3−xO₄ species in the nanosheet matrix function well as a scaffold and support for the dispersion of the Ni_xCo_3−xO₄ nanowires, resulting in a relatively loose and open structure within the electrode matrix. Among all composite electrodes prepared, the one annealed in air at 300 °C displays the best electrochemical behavior, achieving a specific capacitance of 270 mF cm⁻² at 5 mA cm⁻² while maintaining excellent stability (retaining ≈ 89% of the max capacitance after 20 000 cycles), demonstrating its potential for practical application in power storage devices.

Porous ultrathin nanosheet/nanowire composite structures are prepared as high-performance supercapacitor electrodes which exhibit excellent stability.