NiCo-DH nanodots anchored on amorphous NiCo-Sulfide sheets as efficient electrocatalysts for oxygen evolution reaction

Microwave-Assisted Ultrafast Synthesis of Bimetallic Nickel-Cobalt Metal-Organic Frameworks for Application in the Oxygen Evolution Reaction

Herein, a series of monometallic Ni-, Co- and Zn-MOFs and bimetallic NiCo-, NiZn- and CoZn-MOFs of formula M2(BDC)2DABCO and (M,M')2(BDC)2DABCO, respectively, (M, M'=metal) with the same pillar and layer linkers 1,4-diazabicyclo[2.2.2]octane (DABCO) and benzene-1,4-dicarboxylate (BDC) were prepared through a fast microwave-assisted thermal conversion synthesis method (MW) within only 12 min. In the bimetallic MOFs the ratio M:M' was 4 : 1. The mono- and bimetallic MOFs were selected to systematically explore the catalytic-activity of their derived metal oxide/hydroxides for the oxygen evolution reaction (OER). Among all tested bimetallic MOF-derived catalysts, the NiCoMOF exhibits superior catalytic activity for the OER with the lowest overpotentials of 301 mV and Tafel slopes of 42 mV dec-1 on a rotating disk glassy carbon electrode (RD-GCE) in 1 mol L-1 KOH electrolyte at a current density of 10 mA cm-2. In addition, NiCoMOF was insitu grown in just 25 min by the MW synthesis on the surface of nickel foam (NF) with, for example, a mass loading of 16.6 mgMOF/gNF, where overpotentials of 313 and 328 mV at current densities of 50 and 300 mA cm-2, respectively, were delivered and superior long-term stability for practical OER application. The low Tafel slope of 27 mV dec-1, as well as a low reaction resistance from electrochemical impedance spectroscopy (EIS) measurement (Rfar=2 Ω), confirm the excellent OER performance of this NiCoMOF/NF composite. During the electrocatalytic processes or even before upon KOH pre-treatment, the MOFs are transformed to the mixed-metal hydroxide phase α-/β-M(OH)2 which presents the active species in the reactions (turnover frequency TOF=0.252 s-1 at an overpotential of 320 mV). Compared to the TOF from β-M(OH)2 (0.002 s-1), our study demonstrates that a bimetallic MOF improves the electrocatalytic performance of the derived catalyst by giving an intimate and uniform mixture of the involved metals at the nanoscale.

Three-dimensional bimodal pore-rich G/MXene sponge amalgamated with vanadium diselenide nanosheets as a high-performance electrode for electrochemical water-oxidation/reduction reactions

Exploring new strategies to design non-precious and efficient electrocatalysts can provide a solution for sluggish electrocatalytic kinetics and sustainable hydrogen energy. Transition metal selenides are potential contenders for bifunctional electrocatalysis owing to their unique layered structure, low band gap, and high intrinsic activities. However, insufficient access to active sites, lethargic water dissociation, and structural degradation of active materials during electrochemical reactions limit their activities, especially in alkaline media. In this article, we report a useful strategy to assemble vanadium diselenide (VSe2) into a 3D MXene/rGO-based sponge-like architecture (VSe2@G/MXe) using hydrothermal and freeze-drying approaches. The 3D hierarchical meso/macro-pore rich sponge-like morphology not only prevents aggregation of VSe2 nanosheets but also offers a kinetics-favorable framework and high robustness to the electrocatalyst. Synergistic coupling of VSe2 and a MXene/rGO matrix yields a heterostructure with a large specific surface area, high conductivity, and multi-dimensional anisotropic pore channels for uninterrupted mass transport and gas diffusion. Consequently, VSe2@G/MXe presented superior electrochemical activity for both the HER and OER compared to its counterparts (VSe2 and VSe2@G), in alkaline media. The overpotentials required to reach a cathodic and anodic current density of 10 mA cm-2 were 153 mV (Tafel slope = 84 mV dec-1) and 241 mV (Tafel slope = 87 mV dec-1), respectively. The Rct values at the open circuit voltage were as low as 9.1 Ω and 1.41 Ω for the HER and OER activity, respectively. Importantly, VSe2@G/MXe withstands a steady current output for a long 24 h operating time. Hence, this work presents a rational design for 3D microstructures with optimum characteristics for efficient bifunctional alkaline water-splitting.

Nickel molybdate/cobalt iron carbonate hydroxide heterojunction with oxygen vacancy enables interfacial synergism to trigger oxygen evolution reaction

The development of electrocatalysts with excellent performance toward oxygen evolution reaction (OER) for the production of hydrogen is of great significance to alleviate energy crisis and environmental pollution. Herein, the heterostructure (NMO/FCHC-0.4) was fabricated by the coupling growth of NiMoO4 (NMO) and cobalt iron carbonate hydroxide (FCHC) on nickel foam as an electrocatalyst for OER. The interfacial synergy on NMO/FCHC-0.4 heterojunction can promote the interfacial electron redistribution, affect the center position of d band, optimize the adsorption of intermediate, and improve the conductivity. Beyond, oxygen defect sites are conducive to the adsorption of intermediates, and increase the number of active sites. Real-time OER kinetic simulation revealed that the interfacial synergism and molybdate could reduce the adsorption of hydroxide, promote the deprotonation step of M-OH, and facilitate the formation of M-OOH (M represents the metal active site). As a result, NMO/FCHC-0.4 displays excellent OER electrocatalytic performance with an overpotential of 250/280 mV at the current density 100/200 mA cm-2 and robust stability at 100 mA cm-2 for 100 h. This work provides deep insights into the roles of interfacial electronic modulation and oxygen vacancy to design high-efficiency electrocatalysts for OER.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Self-sacrificial reconstruction of MoO42- intercalated NiFe LDH/Co2P heterostructures enabling interfacial synergies and oxygen vacancies for triggering oxygen evolution reaction

Exploring high-efficiency electrocatalysts for oxygen evolution reaction (OER) is one of the most important concerns to produce hydrogen in water electrolysis. Herein, the FNM/Co2P-0.4 heterostructure was designed as an electrocatalyst for the OER process by the combination of MoO42- intercalating NiFe LDH and Co2P on nickel foam (NF). The surface reconstruction and MoO42- leaching can induce the conversion of Co2P and NiFe LDH on FNM/Co2P-0.4 to generate Co/NiOOH with more oxygen vacancies. Beyond, CoOOH and NiOOH can also synergize to reduce the energy barrier of OER, optimize conductivity, and improve stability. The surface reconstruction and the formation of OOH⁎ were further unveiled by in-situ UV-vis absorption spectra and Fourier-transformed alternative current voltammetry (FTACV). The integration of interfacial synergies and oxygen vacancies can facilitate the adsorption/desorption of intermediates, regulate the d-band center, and expose more active sites. And as a result, FNM/Co2P-0.4 shows a significant low overpotential (240 mV) at 50 mA cm-2, a small Tafel (74 mV dec-1), low activation energy (Ea) and remarkable durability. This work provides a new pathway to improve the OER performance by using interfacial synergies and rich oxygen vacancies derived from the self-sacrificial reconstruction of heterostructured electrocatalysts.

Interface engineering of hierarchical NiCoP/NiCoSx heterostructure arrays for efficient alkaline hydrogen evolution at large current density

The development of non-noble metal electrocatalysts with high activity and long-term stability for the hydrogen evolution reaction (HER), especially at large current density, is of great significance for industrial hydrogen production from water using renewable electricity. Constructing heterostructures with interfacial interactions is an effective strategy to improve the catalytic performance for large-current-density HER. Herein, we innovatively present a facile two-step electrodeposition method to immobilize a hierarchical NiCoP/NiCoS_x heterostructure on Ni foam (NF) for alkaline HER. The strong interfacial coupling effect between NiCoP and NiCoS_x not only offers abundant active sites for fast electrochemical reaction, but also enhances the charge transfer ability accompanied by high electrical conductivity. Consequently, the obtained self-supporting NiCoP/NiCoS_x/NF exhibits an excellent catalytic performance with low overpotentials of 68, 144 and 222 mV to deliver current densities of 10, 100 and 500 mA cm^-2 in 1 M KOH, along with good stability for more than 110 h, outperforming most of the reported non-noble metal based HER catalysts. Density functional theory (DFT) results further confirm that this bimetal phosphide/sulfide heterostructure can synergistically optimize the Gibbs free energy of H* during the HER process, thus accelerating the HER reaction kinetics. This work provides a new strategy toward the rational design of large-current-density electrocatalysts, which have great potential in practical large-scale hydrogen production.

Doping Mo into NiFe LDH/NiSe Heterostructure to Enhance Oxygen Evolution Activity by Synergistically Facilitating Electronic Modulation and Surface Reconstruction

It is of great significance to design highly efficient electrocatalysts with abundant earth elements instead of precious metals for water splitting. Herein, Mo-doped NiFe-layered double hydroxides/NiSe heterostructure (Mo-NiFe LDH/NiSe) was fabricated by coupling Mo-doped NiFe LDH and NiSe on nickel foam (NF). The heterostructure electrocatalyst showed ultra-low overpotential (250 mV) and remarkable durability for oxygen evolution reaction (OER) at 150 mA cm^-2 . Both theoretical and experimental results confirmed that Mo doping and interfacial synergism induced the interfacial charge redistribution and the lifted d-band center to weaken the energy barrier (EB) of the formation of OOH^* . Mo doping also facilitated the surface reconstruction of NiFe LDH into Ni(Fe)OOH as the active sites under electro-oxidation process. This work provides a facile strategy for electronic modulation and surface reconstruction of OER electrocatalyst by transition metal doping and heterostructure generation.

Porous Ni3S2-Co9S8 Carbon Aerogels Derived from Carrageenan/NiCo-MOF Hydrogels as an Efficient Electrocatalyst for Oxygen Evolution in Rechargeable Zn-Air Batteries

Herein, we fabricate N-doped porous Ni₃S₂-Co₉S₈/carbon aerogels (Ni₃S₂-Co₉S₈/NCAs) using carrageenan/NiCo-metal-organic framework (MOF) hydrogels as the precursor via the high-temperature carbonization route with excellent electrocatalytic properties for the oxygen evolution reaction (OER). The electrochemical measurements indicate that the Ni₃S₂-Co₉S₈/NCA as a quintessential electrocatalyst exhibits excellent OER performance, which has outperformed most transition metal sulfide (TMS) catalysts in alkaline environments, as attested with a lower overpotential of 337 mV at 10 mA cm^-2 and a smaller Tafel slope of 77 mV dec^-1. Meanwhile, a Zn-air battery based on Ni₃S₂-Co₉S₈/NCA + Pt/C achieves a large power density of up to 256 mW cm^-2 (and 193 mW cm^-2), small charge/discharge voltage gap, and good cycling stability, notably better than the conventional RuO₂ + Pt/C-based Zn-air batteries. These excellent electrocatalytic properties are mainly attributed to the distinct hierarchical porous structure and interfacial synergy between the Ni₃S₂ and Co₉S₈ nanoparticle structure with rich defects, facilitating the mass transport and high graphitization degree beneficial for electron mobility. It is envisioned that the research provides a novel approach for the exploration of marine biomass as an electrocatalyst.

Cooperative effect of bimetallic MOF-derived CoNi(OH)2@NiCo2S4nanocomposite electrocatalysts with boosted oxygen evolution activity

Highly efficient and inexpensive electrocatalysts for oxygen evolution reaction (OER) are extensively studied for water splitting. Herein, a unique bimetallic nanocomposite CoNi(OH)₂@NiCo₂S₄nanosheet arrays derived from metal-organic-frameworks (MOFs, CoNi-ZIF) is simply fabricated on Ni foam, endowing large specific surface area and outstanding electrical conductivity. Compared with their single-metallic counterparts, the bimetallic composite displays dramatically low overpotential and small Tafel slope as well as outstanding catalytic stability. The overpoptential at 20 mA cm^-2for CoNi(OH)₂@NiCo₂S₄is only 230 mV in comparison with Ni(OH)₂@Ni₃S₂(266 mV), Co(OH)₂@Co₃S₄(294 mV) and RuO₂(η = 302 mV). First-principle calculations based on density functional theory (DFT) are carried out and reveal that the introduction of Ni in Co(OH)₂helps lowered the energy difference of ΔG_OOH*-ΔG_O*, and thereby boosting the OER reactivity. This study provides an effective approach for the rational construction of low-cost metal hybrids.

Flower-like Co3Ni1B nanosheets based on reduced graphene oxide (rGO) as an efficient electrocatalyst for the oxygen evolution reaction

Flower-like Co3Ni1B nanosheets based on a reduced graphene oxide electrocatalyst exhibit a better OER performance than commercial RuO2.

Manipulation on Two-Dimensional Amorphous Nanomaterials for Enhanced Electrochemical Energy Storage and Conversion

Low-carbon society is calling for advanced electrochemical energy storage and conversion systems and techniques, in which functional electrode materials are a core factor. As a new member of the material family, two-dimensional amorphous nanomaterials (2D ANMs) are booming gradually and show promising application prospects in electrochemical fields for extended specific surface area, abundant active sites, tunable electron states, and faster ion transport capacity. Specifically, their flexible structures provide significant adjustment room that allows readily and desirable modification. Recent advances have witnessed omnifarious manipulation means on 2D ANMs for enhanced electrochemical performance. Here, this review is devoted to collecting and summarizing the manipulation strategies of 2D ANMs in terms of component interaction and geometric configuration design, expecting to promote the controllable development of such a new class of nanomaterial. Our view covers the 2D ANMs applied in electrochemical fields, including battery, supercapacitor, and electrocatalysis, meanwhile we also clarify the relationship between manipulation manner and beneficial effect on electrochemical properties. Finally, we conclude the review with our personal insights and provide an outlook for more effective manipulation ways on functional and practical 2D ANMs.

Defect-Engineered NiCo-S Composite as a Bifunctional Electrode for High-Performance Supercapacitor and Electrocatalysis

Defect engineering is a reasonable solution to improve the surface properties and electronic structure of nanomaterials. However, how to introduce dual defects into nanomaterials by a simple way is still facing challenge. Herein, we propose a facile two-step solvothermal method to introduce Fe dopants and S vacancies into metal-organic framework-derived bimetallic nickel cobalt sulfide composites (NiCo-S). The as-prepared Fe-doped NiCo-S (Fe-NiCo-S) possesses improved charge storage kinetics and activities as electrode material for supercapacitors and the oxygen evolution reaction (OER). The obtained Fe-NiCo-S nanosheet has a high specific capacitance (2779.6 F g^-1 at 1 A g^-1) and excellent rate performance (1627.2 F g^-1 at 10 A g^-1). A hybrid supercapacitor device made of Fe-NiCo-S as the positive electrode and reduced graphene oxide (rGO) as the negative electrode presents a high energy density of 56.0 Wh kg^-1 at a power density of 847.1 W kg^-1 and excellent cycling stability (capacity retention of 96.5% after 10,000 cycles at 10 A g^-1). Additionally, the Fe-NiCo-S composite modified by Fe doping and S vacancy has an ultralow oxygen evolution overpotential of 247 mV at 10 mA cm^-2. Based on the density functional theory (DFT) calculation, defects cause more electrons to appear near the Fermi level, which is conducive to electron transfer in electrochemical processes. Our work provides a rational strategy for facilely introducing dual defects into metal sulfides and may provide a novel idea to prepare electrode materials for energy storage and energy conversion application.

Ferrocene-Incorporated Cobalt Sulfide Nanoarchitecture for Superior Oxygen Evolution Reaction

Here, ferrocene(Fc)-incorporated cobalt sulfide (Co_x S_y ) nanostructures directly grown on carbon nanotube (CNT) or carbon fiber (CF) networks for electrochemical oxygen evolution reaction (OER) using a facile one-step solvothermal method are reported. The strong synergistic interaction between Fc-Co_x S_y nanostructures and electrically conductive CNTs results in the superior electrocatalytic activity with a very small overpotential of ≈304 mV at 10 mA cm^-2 and a low Tafel slope of 54.2 mV dec^-1 in 1 m KOH electrolyte. Furthermore, the Fc-incorporated Co_x S_y (FCoS) nanostructures are directly grown on the acid pretreated carbon fiber (ACF), and the resulting fabricated electrode delivers excellent OER performance with a low overpotential of ≈315 mV at 10 mA cm^-2 . Such superior OER catalytic activity can be attributed to 3D Fc-Co_x S_y nanoarchitectures that consist of a high concentration of vertical nanosheets with uniform distribution of nanoparticles that afford a large number of active surface areas and edge sites. Besides, the tight contact interface between ACF substrate and Fc-Co_x S_y nanostructures could effectively facilitate the electron transfer rate in the OER. This study provides valuable insights for the rational design of energy storage and conversion materials by the incorporation of other transition metal into metal sulfide/oxide nanostructures utilizing metallocene.

Rational phase transformation and morphology design to optimize oxygen evolution property of cobalt tungstate

In this work, a facile and feasible soft template method with the aid of buffer solution is successfully applied to synthesize high-order mesoporous cobalt tungstate for the first time. Attributing to the regulation of reaction solution's pH value and the existence of template, the phenomenon of phase transformation occurs, and high-order mesoporous structure is formed. Because of the variation of phase and morphology, only 448 mV can deliver a current density of 10 mA cm^-2 with a small Tafel slope (61 mV dec^-1) for mesoporous cobalt tungsten oxide hydroxide, while the cobalt tungstate nanoparticles cannot satisfy the basic demand of electrocatalysts. Herein, rational phase transformation and morphology design can significantly affect the property of oxygen evolution, which can provide vast opportunities to turn into candidates for the novel oxygen evolution catalyst.

A three-dimensional porous CoSnS@CNT nanoarchitecture as a highly efficient bifunctional catalyst for boosted OER performance and photocatalytic degradation

It is urgent and significant to develop competent, inexpensive transition metal-based catalysts with multifunctional catalytic properties for wide applications. To meet this requirement, herein, for the first time, we present a novel bifunctional CoSnS@CNT hybrid via a simple one-pot surfactant-free hydrothermal method. The CoSnS@CNT hybrid has a unique three-dimensional (3D) porous nanoarchitecture, which is constructed by ultrathin CoSnS homogenously and compactly anchored on a highly conductive CNT skeleton. The porous nanoarchitecture of CoSnS@CNT provides abundant catalytic sites and facilitates ion diffusion, and the CNT skeleton accelerates electron transfer. Benefitting from these merits, the CoSnS@CNT hybrid acted as a bifunctional catalyst with boosted electrocatalytic and photocatalytic performance, where it delivered a tremendous oxygen evolution reaction (OER) performance with a low overpotential of 330 mV at a current density of 10 mA cm^-2 and excellent outstanding stability. Moreover, it showed 91.72% photocatalytic degradation for Rhodamine B dye, which is 2-times higher than that of bare CoSnS. This study presents a systematic approach to judiciously design nanostructures and simply synthesize non-noble metal-based bifunctional catalysts with boosted electrocatalytic and photocatalytic activities.

Recent advances in ternary layered double hydroxide electrocatalysts for the oxygen evolution reaction

The recent advances in ternary layered double hydroxide electrocatalysts, including the strategies used for the design, synthesis, and evaluation of their performance for oxygen evolution reaction are reviewed in this account.