Enhanced activation of hydrogen peroxide using nitrogen doped graphene for effective removal of herbicide 2,4-D from water by iron-free electrochemical advanced oxidation

Carbonaceous materials in structural dimensions for advanced oxidation processes

Carbonaceous materials have attracted extensive research and application interests in water treatment owing to their advantageous structural and physicochemical properties. Despite the significant interest and ongoing debates on the mechanisms through which carbonaceous materials facilitate advanced oxidation processes (AOPs), a systematic summary of carbon materials across all dimensions (0D-3D nanocarbon to bulk carbon) in various AOP systems remains absent. Addressing this gap, the current review presents a comprehensive analysis of various carbon/oxidant systems, exploring carbon quantum dots (0D), nanodiamonds (0D), carbon nanotubes (1D), graphene derivatives (2D), nanoporous carbon (3D), and biochar (bulk 3D), across different oxidant systems: persulfates (peroxymonosulfate/peroxydisulfate), ozone, hydrogen peroxide, and high-valent metals (Mn(VII)/Fe(VI)). Our discussion is anchored on the identification of active sites and elucidation of catalytic mechanisms, spanning both radical and nonradical pathways. By dissecting catalysis-related factors such as sp2/sp3 C, defects, and surface functional groups that include heteroatoms and oxygen groups in different carbon configurations, this review aims to provide a holistic understanding of the catalytic nature of different dimensional carbonaceous materials in AOPs. Furthermore, we address current challenges and underscore the potential for optimizing and innovating water treatment methodologies through the strategic application of carbon-based catalysts. Finally, prospects for future investigations and the associated bottlenecks are proposed.

Degradation of phenol by metal-free electro-fenton using a carbonyl-modified activated carbon cathode: Promoting simultaneous H2O2 generation and activation

The low yield of hydrogen peroxide, narrow pH application range, and secondary pollution due to iron sludge precipitation are the major drawbacks of the electro-Fenton (EF) process. Metal-free electro-Fenton technology based on carbonaceous materials is a promising green pollutant degradation technology. Activated carbon cathodes enriched with carbonyl functional groups were prepared using a two-step annealing method for the degradation of phenol pollutants. The •OH in the activation process of H2O2 were identified using the EPR test technique. The action mechanism of carbonyl groups on H2O2 activation was investigated in conjunction with density functional theory (DFT) calculations. The EPR tests demonstrated that the modified activated carbon could promote the in-situ activation of H2O2 to •OH. And the results of material analysis and DFT showed that C=O could facilitate the activation of hydrogen peroxide through the electron transfer mechanism as an electron-donating group. Electrochemical tests showed that both the oxygen reduction activity and 2e-ORR selectivity of the modified activated carbons were significantly improved. Compared with the original activated carbon cathode and EF, the degradation efficiency of phenol in the ACNH-1000/GF cathode was increased by 58.10% and 45.61%, respectively. Compared with EF, ACNH-1000/GF metal-free electro-Fenton effectively expands the pH application range, and is proven to be less affected by solution initial pH, while avoiding secondary pollution. The metal-free electro-Fenton system can save more than a quarter of the cost of EF system. This study has a deep understanding of the reaction mechanism of the carbonyl modified activated carbon, and provides valuable insights for the design of metal-free catalysts, so as to promote its application in the degradation of organic pollutants.

Developing In2S3 upon modified MgTiO3 anchored on nitrogen-doped CNT for sustainable sensing and removal of toxic insecticide clothianidin

Herein, the study introduces a novel bifunctional In2S3/MgTiO3/TiO2@N-CNT (IMTNC) nanocomposite, which is poised to revolutionize the detection and removal of clothianidin (CLD) from aquatic environments by synergistic adsorption and photodegradation. Confirmation of the material's synthesis was done using structural, optical, morphological, and chemical characterizations. An outstanding sensitivity of 2.168 μA/nM.cm2 with a linear range of 4-100 nM and a LOD of 0.04 nM, along with an exceptional elimination efficiency of 98.06 ± 0.84% for about 10 ppm CLD within 18 min was demonstrated by the IMTNC nanocomposite. Extensive studies were carried out to appraise the material's effectiveness in the presence of various interfering species, such as cations, anions, organic compounds, and different water matrices, and a comprehensive assessment of its stability throughout several cycles was made. Response Surface Methodology (RSM) study was used to determine the ideal removal conditions for improved performance. In addition, the catalytic performance in removing various other pollutants was also analyzed. Adding In2S3 and developing N-doped Carbon Nanotubes (N-CNT) increased conductivity and higher electrochemical sensing skills, improving charge transfer and increasing photocatalytic activity. This research underscores the potential of the IMTNC nanocomposite as a promising candidate for advanced environmental sensing and remediation applications.

Electrochemical treatment of simulated wastewater containing nitroaromatic compound with cobalt-titanium electrode

The Co3O4-Ti electrodes were successfully prepared via calcination method to degrade nitrogen-containing (TNP) simulate wastewater in this reaserch. SEM and EDS were employed to analyze the morphology and element composition on Co3O4-Ti electrode, revealing the successful load of cobalt element. Then the electrochemical performance was evaluated by CV and indicated a better redox performance of electrode. Furthermore, five factors as processing time (A), electrolyte concentration (B), pH (C), initial concentration of TNP (D), and current density (E) were systematic studied in electrical treatment process. The removal rate of TN could be 77%. After the optimization work by RSM, the removal rate of TN raised up to 81% with the condition as: A of 180 min, B of 0.05 M, C of 3, D of 400 mg L-1, and E of 20 mA cm-2. The sequence of significants is: C > D > A > E > B. Mechanism analysis revealed that the entire process could be divided into two stages. In the first stage, organic nitrogen compounds were converted into inorganic nitrogen species, such as NO3-N. The oxidation and reduction would react owing to the generating of ·OH at second stage in order to turn the NO3-N into NO2-N, NH4-N or N2. The activation of ·OH on the surface of Co3O4-Ti electrode possesses the exothermic nature with transition theory. The energy calculation of 1.168 eV indicated these reactions could occur spontaneously.

Immobilizing white-rot fungi laccase: Toward bio-derived supports as a circular economy approach in organochlorine removal

Despite their high persistence in the environment, organochlorines (OC) are widely used in the pharmaceutical industry, in plastics, and in the manufacture of pesticides, among other applications. These compounds and the byproducts of their decomposition deserve attention and efficient proposals for their treatment. Among sustainable alternatives, the use of ligninolytic enzymes (LEs) from fungi stands out, as these molecules can catalyze the transformation of a wide range of pollutants. Among LEs, laccases (Lac) are known for their efficiency as biocatalysts in the conversion of organic pollutants. Their application in biotechnological processes is possible, but the enzymes are often unstable and difficult to recover after use, driving up costs. Immobilization of enzymes on a matrix (support or solid carrier) allows recovery and stabilization of this catalytic capacity. Agricultural residual biomass is a passive environmental asset. Although underestimated and still treated as an undesirable component, residual biomass can be used as a low-cost adsorbent and as a support for the immobilization of enzymes. In this review, the adsorption capacity and immobilization of fungal Lac on supports made from residual biomass, including compounds such as biochar, for the removal of OC compounds are analyzed and compared with the use of synthetic supports. A qualitative and quantitative comparison of the reported results was made. In this context, the use of peanut shells is highlighted in view of the increasing peanut production worldwide. The linkage of methods with circular economy approaches that can be applied in practice is discussed.

Metal-free electrified membranes for contaminants oxidation: Synergy effect between membrane rejection and nanoconfinement

Electro-Fenton processes are frequently impeded by depletion of metal catalysts, unbalance between H2O2 generation and activation, and low concentration of reactive species (e.g., •OH) in the bulk solution. A metal-free electro-Fenton membrane was fabricated with nitrogen-doped carbon nanotube (N-CNT) and reduced graphene oxide (RGO). N-CNT acted as a catalyst for both H2O2 generation and activation, while the incorporated RGO served as the second catalyst for H2O2 generation and improved the performance of membrane rejection. The electrified membrane was optimized in terms of nitrogen precursors selection and composition of N-CNT and RGO to achieve optimal coupling between H2O2 generation and activation. The membrane fabricated with 67% mass of N-CNT with urea as the precursor achieved over 95% removal of the target contaminants in a single pass through the membrane with a water flux of 63 L m-2 h-1. This membrane also exhibited efficient transformation of various concentrations of contaminants (i.e., 1-10 mg L-1) over a broad range of pH (i.e., 3-9). Due to its good durability and low energy consumption, the metal-free electro-Fenton membrane holds promise for practical water treatment application. The concentration-catalytic oxidation model elucidated that the elevated contaminant concentration near the membrane surface enhanced the transformation rate by 40%. The nanoconfinement enhanced the transformation rate constant inside the membrane by a factor of 105 because of elevated •OH concentration inside the nanopores. Based on the prediction of this model, the configuration of the membrane reactor has been optimized.

A novel magnetic adsorbent from activated carbon fiber and iron oxide nanoparticles for 2,4-D removal from aqueous medium

Carbonaceous materials have been widely applied as adsorbents, but there are some factors that affect their efficiency. In this context, advances in nanotechnology provide new and more efficient methodologies for water treatment. This study evaluated the efficiency of a novel carbon-based adsorbent developed from Brazilian polyacrylonitrile textile fiber and functionalized with iron oxide magnetic nanoparticles for the removal of 2,4-dichlorophenoxyacetic acid (2,4-D) from the aqueous medium. The synthesized adsorbent (ACF-Fe3O4) was characterized by FTIR, XRD, VSM, Zeta potential, SEM, EDX, and TEM. The characterization techniques showed that the adsorbent has peaks characteristic of its precursors and superparamagnetic characteristics, confirming the efficiency of the synthesis method. The adsorption tests evaluated the influence of adsorbent dosage, pH of the contaminant solution, contact time and temperature on the removal of 2,4-D. The experimental data were better adjusted by the pseudo-second order kinetic model and by the Langmuir isothermal model. The thermodynamic parameters revealed that the process is exothermic, spontaneous and thermodynamically favorable. Under the best experimental conditions, the maximum adsorption capacity obtained was 51.10 mg g-1 with an adsorbent concentration of 0.33 g L-1, natural pH of the solution, temperature of 288 K at the equilibrium time of six hours. Adsorbent reusage was studied in four desorption cycles. The adsorption mechanism can be explained through π-π bonds, hydrogen bonds and electrostatic interactions. The prepared material presented high-efficiency adsorption capacity of 2,4-D compared to other carbonaceous materials present in the literature, demonstrating its viability for the removal of this contaminant from the aqueous medium.

Carbon Gels-Green Graphene Composites as Metal-Free Bifunctional Electro-Fenton Catalysts

The Electro-Fenton (EF) process has emerged as a promising technology for pollutant removal. However, the EF process requires the use of two catalysts: one acting as an electrocatalyst for the reduction of oxygen to H2O2 and another Fenton-type catalyst for the generation of ·OH radicals from H2O2. Thus, the search for materials with bifunctionality for both processes is required for a practical and real application of the EF process. Thus, in this work, bifunctional electrocatalysts were obtained via doping carbon microspheres with Eco-graphene, a form of graphene produced using eco-friendly methods. The incorporation of Eco-graphene offers numerous advantages to the catalysts, including enhanced conductivity, leading to more efficient electron transfer during the Electro-Fenton process. Additionally, the synthesis induced structural defects that serve as active sites, promoting the direct production of hydroxyl radicals via a 3-electron pathway. Furthermore, the spherical morphology of carbon xerogels enhances the accessibility of the reagents to the active sites. This combination of factors results in the effective degradation of Tetracycline (TTC) using metal-free catalysts in the Electro-Fenton process, achieving up to an impressive 83% degradation without requiring any other external or additional catalyst.

Greener Method for the Application of TiO2 Nanoparticles to Remove Herbicide in Water

TiO₂ nanoparticles have emerged as a great photocatalyst to degrade organic contaminants in water; however, the nanoparticles dispersed in water could be difficult to be recovered and potentially become contaminant. Herbicide like 2,4-dichlorophenoxyacetic acid (2,4-D) used in agriculture usually ends up with a large fraction remaining in water and sediment, which may cause potential risk to human health and the ecosystem. This study proposes a greener method to utilize TiO₂ as photocatalyst to remove 2,4-D from water. Accordingly, TiO₂ nanoparticles (10-45 nm) were synthesized and grafted on lightweight fired clay to generate a TiO₂-based floating photocatalyst. Experimental testing revealed that 60.2% of 2,4-D (0.1 mM) can be decomposed in 250 min under UV light with TiO₂-grafted lightweight fired clay floating on water. Degradation fits well into the pseudo-first-order kinetic model. The floating photocatalysts can degrade approximately 50% 2,4-D in 250 min under sunlight and the degradation efficiency is stable for cycles. The results revealed that the fabrication of floating photocatalyst could be a promising and greener way to remove herbicide contaminants in water using TiO₂.

Highly graphitic Fe-doped carbon xerogels as dual-functional electro-Fenton catalysts for the degradation of tetracycline in wastewater

Fe-doped carbon xerogels with a highly developed graphitic structure were synthesized by a one-step sol-gel polymerization. These highly graphitic Fe-doped carbons are presented as promising dual-functional electro-Fenton catalysts to perform both the electro-reduction of O₂ to H₂O₂ and H₂O₂ catalytic decomposition (Fenton) for wastewater decontamination. The amount of Fe is key to the development of this electrode material, since affects the textural properties; catalyzes the development of graphitic clusters improving the electrode conductivity; and influences the O₂-catalyst interaction controlling the H₂O₂ selectivity but, at the same time is the catalyst for the decomposition of the electrogenerated H₂O₂ to OH^• radicals for the organic pollutants oxidation. All materials achieve the development of ORR via the 2-electron route. The presence of Fe considerably improves the electro-catalytic activity. However, a mechanism change seems to occur at around -0.5 V in highly Fe-doped samples. At potential lower than -0.5 eV, the present of Fe^δ+ species or even Fe-O-C active sites favour the selectivity to 2e-pathway, however at higher potentials, Fe^δ+ species are reduced favoring a O-O strong interaction enhancing the 4e-pathway. The Electro-Fenton degradation of tetracycline was analyzed. The TTC degradation is almost complete (95.13%) after 7 h of reaction without using any external Fenton-catalysts.

From Fenton and ORR 2e−-Type Catalysts to Bifunctional Electrodes for Environmental Remediation Using the Electro-Fenton Process

Currently, the presence of emerging contaminants in water sources has raised concerns worldwide due to low rates of mineralization, and in some cases, zero levels of degradation through conventional treatment methods. For these reasons, researchers in the field are focused on the use of advanced oxidation processes (AOPs) as a powerful tool for the degradation of persistent pollutants. These AOPs are based mainly on the in-situ production of hydroxyl radicals (OH•) generated from an oxidizing agent (H2O2 or O2) in the presence of a catalyst. Among the most studied AOPs, the Fenton reaction stands out due to its operational simplicity and good levels of degradation for a wide range of emerging contaminants. However, it has some limitations such as the storage and handling of H2O2. Therefore, the use of the electro-Fenton (EF) process has been proposed in which H2O2 is generated in situ by the action of the oxygen reduction reaction (ORR). However, it is important to mention that the ORR is given by two routes, by two or four electrons, which results in the products of H2O2 and H2O, respectively. For this reason, current efforts seek to increase the selectivity of ORR catalysts toward the 2e− route and thus improve the performance of the EF process. This work reviews catalysts for the Fenton reaction, ORR 2e− catalysts, and presents a short review of some proposed catalysts with bifunctional activity for ORR 2e− and Fenton processes. Finally, the most important factors for electro-Fenton dual catalysts to obtain high catalytic activity in both Fenton and ORR 2e− processes are summarized.

Investigating the electrochemical advanced oxidation mechanism of N-doped graphene aerogel: Molecular dynamics simulation combined with DFT method

Nitrogen-doped graphene as a perfectly-efficient and environmentally compatible electrocatalyst won widespread attention in electrochemical advanced oxidation processes (EAOP). However, the relationship between surface structure regulation and activity of catalysts is still lacking in systematic scientific guidance. Herein, nitrogen-doped graphene aerogel (NGA) was conveniently prepared through hydrothermal treatment, and then utilized to fabricate the gas diffusion electrode (GDE) as the cathode for tetracycline (TC) removal. High free radical yield (81.2 μM) and fast reaction rate (0.1469 min^-1) were found in NGA system. The molecular dynamics simulation (MD) results showed that the interaction energy of NGA was greater than the raw graphene aerogel (GA). The adsorption activation of H₂O₂ and the degradation of TC occurred in the first adsorption layer of catalysts, and both processes turned more orderly after nitrogen doping. Moreover, the van der Waals interaction was stronger than the electrostatic interaction. Density function theory (DFT) revealed that the adsorption energy of H₂O₂ at graphitic N, pyridinic N, and pyrrolic N sites was -0.03 eV, -0.39 eV, and -0.30 eV, respectively. Pyridinic N sites were inferred as the main functional regions of in-situ activation •OH, there were more likely to occur ectopic reaction in pyrrolic N, and graphitic N were responsible for improving H₂O₂ production. By revealing the microstructure and activation characteristics of NGA, an experiment-simulation complementary strategy is provided in the EAOP to discover or to optimize new catalysts.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Recent advances in application of heterogeneous electro-Fenton catalysts for degrading organic contaminants in water

Over the last decades, advanced oxidation processes (AOPs) have been widely used in surface and ground water pollution control. The heterogeneous electro-Fenton (EF) process has gained much attention due to its properties of high catalytic performance, no generation of iron sludge, and good recyclability of catalyst. As of October 2022, the cited papers and publications of EF are around 1.3 × 10^-5 and 3.4 × 10^-3 in web of science. Among the AOP techniques, the contaminant removal efficiencies by EF process are above 90% in most studies. Current reviews mainly focused on the mechanism of EF and few reviews comprehensively summarized heterogeneous catalysts and their applications in wastewater treatment. Thus, this review focuses on the current studies covering the period 2012-2022, and applications of heterogeneous catalysts in EF process. Two kinds of typical heterogeneous EF systems (the addition of solid catalysts and the functionalized cathode catalysts) and their applications for organic contaminants degradation in water are reviewed. In detail, solid catalysts, including iron minerals, iron oxide-based composites, and iron-free catalysts, are systematically described. Different functionalized cathode materials, containing Fe-based cathodes, carbonaceous-based cathodes, and heteroatom-doped cathodes, are also reviewed. Finally, emphasis and outlook are made on the future prospects and challenges of heterogeneous EF catalyst for wastewater treatments.

Catalytic efficiency of raw and hydrolyzed eggshell in the oxidation of crystal violet and dye bathing wastewater by thermally activated peroxide oxidation method

In this study, hydrochar-based-eggshell was prepared via the subcritical water medium (SCWM) and used as a catalyst in the thermally activated peroxide oxidation (TAPO) approach for crystal violet and dye bathing wastewater degradation. The catalytic activities for the raw eggshell (RES) and hydrochar-based-eggshell (HES) were compared. RES and HES were characterized using a scanning electron microscope (SEM),energy-dispersive X-ray spectroscopy (SEM-EDX), and Fourier transforms infrared spectroscopy (FT-IR). The affecting parameters on the degradation process were optimized using response surface methodology (RSM). The effects of temperature (293-333 K), amount of catalyst (5-25 mg/50 mL), the concentration of H₂O₂ (0-8 mM), and treatment time (10-70 min) on the TAPO method were investigated using central composite design (CCD). For the crystal violet removal, two models were developed. Both models were significant and can be used to describe the design space. Also, the dye bathing wastewater degradation was described by another developed model, which had a high correlation coefficient (R² = 0.97). In general, catalytic activity for HES was higher than RES. The degradation of crystal violet reached 98.10% when a 20 mg HES catalyst and 6 mM H₂O₂ at 323 K for 55 min were used. While 97% of the color of dye bathing wastewater was removed in 55 min at 323 K using 25 mg of HES and 4 mM H₂O₂. This study showed that the hydrolyzed eggshells could be used in the oxidation of crystal violet and dye bathing wastewater by the thermally activated peroxide oxidation method.

O- and F-doped porous carbon bifunctional catalyst derived from polyvinylidene fluoride for sulfamerazine removal in the metal-free electro-Fenton process

Heteroatom-doped carbon materials can effectively activate H₂O₂ into •OH during the metal-free electro-Fenton (EF) process. However, information on bifunctional catalysts for the simultaneous generation and activation of H₂O₂ is scarce. In this study, O- and F-doped porous carbon cathode materials (PPCs) were prepared by the direct carbonization of polyvinylidene fluoride (PVDF) for sulfamerazine (SMR) removal in a metal-free EF process. The porous structure and chemical composition of the PPCs were regulated by the carbonization temperature. PPC-6 (carbonized at 600 °C) exhibited optimal electrocatalytic performance in terms of electrochemical H₂O₂ generation and activation owing to its high specific surface area, mesoporous structure, and optimum fractions of doped O and F. Excellent performance of the 2e^- oxygen reduction reaction was found with an H₂O₂ selectivity of 93.5% and an average electron transfer number of 2.13. An H₂O₂ accumulative concentration of 103.9 mg/L and an SMR removal efficiency of 90.1% were achieved during the metal-free EF process. PPC-6 was able to stably remove SMR over five consecutive cycles, retaining 92.6% of its original performance. Quantitative structure-activity relationship analysis revealed that doped oxygen functional groups contributed substantially to H₂O₂ generation, and semi-ionic C-F bonds with high electronegativity were the cause of the activation of H₂O₂ to •OH. These findings suggest that the PVDF-derived carbonaceous catalysts are feasible and desirable for metal-free EF processes.

Fabrication of Novel Bio-Composites Based on Rice Milk for the Delivery of Capsaicinoids as Green Herbicides against Cynodon dactylon Weed

In this paper, rice milk-based beads were fabricated through gelation in a calcium chloride solution. Green extraction of chili pepper in water/ethanol was conducted in order to obtain powder extract (PE) rich in apigenin C-pentosyl-C-hexoside, capsaicin, and dihydrocapsaicin. The effect of capsaicinoids loading on beads’ properties was evaluated in terms of morphological and physical properties. Swelling phenomena and diameter variation of beads were studied as a function of time proving correspondence with the PE amount. The effect of ionic strength on bead swelling was considered. Kinetic studies of PE release were conducted to investigate the release profiles, which were modeled through a modified Baker and Lonsdale model by considering the change in mean diameter over time. The effect of PE loading was then correlated to the growth of Cynodon dactylon weed through in vivo tests. The results corroborate the performances of the encapsulated PE to be used as natural and green herbicide release systems able to inhibit the growth and the proliferation of weeds.

Polyaniline derived carbon membrane and its in-situ membrane fouling mitigation performance in MBR based on metal-free electro-Fenton

An electro-enhanced membrane bioreactor (EMBR) was constructed with polyaniline-based carbon (PAC) separation membrane as the membrane-electrode, which could realize the in-situ electro-generation and activation of H₂O₂ to ·OH depending on the graphitic and pyridinic N as active sites without metal catalyst. After the continuous operation of the bioreactor for 74 days, approximately 77.41% irreversible membrane fouling occurred on the electrochemically enhanced membrane, which was less than that on the control membrane (85.96%). The ·OH oxidation combined with electrostatic barrier formed by -1.0 V enhanced PAC membrane suppressed the extracellular polymeric substances deposition on membrane. After operation, the strength of total cell, proteins, β-polysaccharides and α-polysaccharides on the membrane without bias were 5.17, 4.32, 9.65 and 16.31, respectively. In EMBR, the corresponding strength were 2.03, 3.35, 2.15 and 6.73. After calculation, the unblocked pores accounted for 35.3% and 78.5% of the total membrane surface in MBR and EMBR, respectively, indicating the fouling was alleviated obviously. Meanwhile, the EMBR owned a satisfactory wastewater treatment effect with average effluent chemical oxygen demand and NH₄⁺-N around 18.98 mg/L and 0.68 mg/L. The successful implementation of this strategy achieved a green and metal-free method for ·OH production with electrochemical effect for membrane fouling control in MBR.

Generation of hydroxyl radicals by metal-free bifunctional electrocatalysts for enhanced organics removal

Low yields of H₂O₂ and a narrow range of appropriate pH values have been two major drawbacks for electro-Fenton (EF) process. Herein, metal-free electrochemical advanced oxidation processes (EAOPs) were developed with nitrogen and sulfur co-doped electrochemically exfoliated graphene (N, S-EEGr) electrocatalysts, which was confirmed as an outstanding bifunctional catalyst for synchronous generation and activation of H₂O₂ via (2 + 1) e^- consecutive reduction reactions. Specifically, two elements (N, S) in metal-free N, S-EEGr-CF cathode synergize to promote the formation of H₂O₂ followed by its activation. With N, S-EEGr-CF cathode, phenol of initial 50 mg L^-1 could be effectively removed within pH 3-11 and 6.25 mA cm^-2, and 100% removal efficiency could be achieved within 15-min even at neutral pH. The pseudo-first-order rate constant for phenol removal in metal-free EAOPs with N,S-EEGr-CF at neutral pH was 10 times higher than that with EF process. Detection of active species, coupled with decay kinetics with specific trapping agents, confirmed that OH was the dominant oxidizing species promoting removal efficiencies of organics (phenol, antibiotics and dyes) at pH 3 and pH 7. In the actual wastewater treatment, the synergistic effect of bifunctional catalyst would also be used for improving the degradation efficiency of organics. Thus, the metal-free EAOPs with N,S-EEGr-CF cathode may serve as an alternative in wastewater treatment with a broadened range of solution pH values and avoiding Fe²⁺ (catalyst) addition.

Graphene-based sponges for electrochemical degradation of persistent organic contaminants

Graphene-based sponges doped with atomic nitrogen and boron were applied for the electrochemical degradation of persistent organic contaminants in one-pass, flow-through mode, and in a low-conductivity supporting electrolyte. The B-doped anode and N-doped cathode was capable of >90% contaminant removal at the geometric anodic current density of 173 A m^-2. The electrochemical degradation of contaminants was achieved via the direct electron transfer, the anodically formed O₃, and by the OH^• radicals formed by the decomposition of H₂O₂ produced at the cathode. The identified transformation products of iopromide show that the anodic cleavage of all three C-I bonds at the aromatic ring was preferential over scissions at the alkyl side chains, suggesting a determining role of the π- π interactions with the graphene surface. In the presence of 20 mM sodium chloride (NaCl), the current efficiency for chlorine production was <0.04%, and there was no chlorate and perchlorate formation, demonstrating a very low electrocatalytic activity of the graphene-based sponge anode towards chloride. Graphene-based sponges were produced using a low-cost, bottom-up method that allows easy introduction of dopants and functionalization of the reduced graphene oxide coating, and thus tailoring of the material for the removal of specific contaminants.

Evaluation and comparison of advanced oxidation processes for the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D): a review

Organochlorine pesticides have generated public concern worldwide because of their toxicity to human health and the environment, even at low concentrations, and their persistence, being mostly nonbiodegradable. The use of 2,4-dichlorophenoxyacetic acid (2,4-D) has increased in recent decades, causing severe water contamination. Several treatments have been developed to degrade 2,4-D. This manuscript presents an overview of the physicochemical characteristics, uses, regulations, environmental and human health impacts of 2,4-D, and different advanced oxidation processes (AOPs) to degrade this organic compound, evaluating and comparing operation conditions, efficiencies, and intermediaries. Based on this review, 2,4-D degradation is highly efficient in ozonation (system O₃/plasma, 99.8% in 30 min). Photocatalytic, photo-Fenton, and electrochemical processes have the optimal efficiencies of degradation and mineralization: 97%/79.67% (blue TiO₂ nanotube arrays//UV), 100%/98% (Fe²⁺/H₂O₂/UV), and 100%/84.3% (MI-meso SnO₂), respectively. The ozonation and electrochemical processes show high degradation efficiencies, but energy costs are also high, and photocatalysis is more expensive with a separation treatment used to recover the catalyst in the solution. The Fenton process is a viable economic-environmental option, but degradation efficiencies are often low (50-70%); however, they are increased when solar UV radiation is used (90-100%). AOPs are promising technologies for the degradation of organic pollutants in real wastewater, so evaluating their strengths and weaknesses is expected to help select viable operational conditions and obtain optimal efficiencies.

Optimization of photo-electro/Persulfate/nZVI process on 2-4 Dichlorophenoxyacetic acid degradation via central composite design: a novel combination of advanced oxidation process

2-4 Dichlorophenoxy acetic acid is most publicly applied from chlorinated phenoxy acids herbicides. In this research, central composite design for optimization of photo-Elecro/persulfate/nZVI process to degradation and mineralization of this herbicide in aqueous solution to environment protection was applied. The initial pH (2-4), persulfate anion concentration (0.25-0.5 mg/L), direct electrical (0.5-1 A), herbicide concentration (50-100 mg/l), nZVI dose (0.05-1 mg/L), and reaction time (50-100 mg/l) are independent variables optimized. Also, the synergist effect, COD and TOC removal, the effect of radical scavengers, and by-products were investigated. The fitting of the model, suggested a quadratic model (R2 = 0.9926). F-value and P value of ANOVA were 719.81 and 0.0001 respectivelty. After optimizing the PEP/nZVI process, the proposed optimal conditions was pH = 3.4, persulfate concentration equal to 0.49 mg/l, in 1 A direct current, nZVI dose equal to 0.1 mg/l, in 50.05 mg/l herbicide concentration as an initial concentration, in 80 min reaction time. The theoretical and actual removal was evaluated 91.99% and 92%, respectively. In the optimum condition, 45.4% synergist effect indicated. 78.3% and 66.5% of initial COD and TOC were decreased. 39.02% of Cl ion was released form 2,4-D structure. The presence of radical scavengers have an adverse impact on the performance of process. The highest amount of radical scavenging was in methanol, tert-butyl alcohol and bicarbonate ions at concentrations at 50 mM/l. The kinetic data was fitted via pseudo-first-order reaction (R2 = 0.99).The direct and indirect oxidation process lead to formation of several organic by-products which were confirmed by GC-MS analysis.

Carbonaceous cathode materials for electro-Fenton technology: Mechanism, kinetics, recent advances, opportunities and challenges

Electro-Fenton (EF) technique has gained significant attention in recent years owing to its high efficiency and environmental compatibility for the degradation of organic pollutants and contaminants of emerging concern (CECs). The efficiency of an EF reaction relies primarily on the formation of hydrogen peroxide (H₂O₂) via 2e^─ oxygen reduction reaction (ORR) and the generation of hydroxyl radicals (^●OH). This could be achieved through an efficient cathode material which operates over a wide pH range (pH 3-9). Herein, the current progresses on the advancements of carbonaceous cathode materials for EF reactions are comprehensively reviewed. The insights of various materials such as, activated carbon fibres (ACFs), carbon/graphite felt (CF/GF), carbon nanotubes (CNTs), graphene, carbon aerogels (CAs), ordered mesoporous carbon (OMCs), etc. are discussed inclusively. Transition metals and hetero atoms were used as dopants to enhance the efficiency of homogeneous and heterogeneous EF reactions. Iron-functionalized cathodes widened the working pH window (pH 1-9) and limited the energy consumption. The mechanism, reactor configuration, and kinetic models, are explained. Techno economic analysis of the EF reaction revealed that the anode and the raw materials contributed significantly to the overall cost. It is concluded that most reactions follow pseudo-first order kinetics and rotating cathodes provide the best H₂O₂ production efficiency in lab scale. The challenges, future prospects and commercialization of EF reaction for wastewater treatment are also discussed.

Moving-bed biofilm reactor combined with three-dimensional electrochemical pretreatment (MBBR-3DE) for 2,4-D herbicide treatment: application for real wastewater, improvement of biodegradability

2,4-Dichlorophenoxyacetic acid (2,4-D) is a herbicide that is considered as a carcinogenic and highly toxic contaminant, and due to its biological and chemical stability, its degradation is very difficult. Therefore, this study aimed to investigate a hybrid system's efficiency of three-dimensional electrochemical (3DE) process and a moving bed biofilm reactor (MBBR) in removing 2,4-D herbicides from aqueous solutions. In this experimental study, the electrochemical degradation of 2,4-D herbicide in a 3DE process with a G/β-PbO2 anode was first investigated as a pretreatment process. Then, in the post-treatment stage, MBBR with continuous flow was used. The amount of aeration in the MBBR reactor was 4 L min-1, and the amount of dissolved oxygen (DO) was in the range of 3-5 mg L-1. The effect of various parameters such as hydraulic retention time (HRT) and filling ratio were investigated. The amount of sewage injection was set between 0.001-0.004 L min-1. Routine microbiological biochemical tests were used to detect bacteria. BOD5/COD, COD/TOC, AOS, and COS ratio parameters were used to determine the biodegradability of 2.4-D due to the effluent of the 3DE process. The results showed that with increasing current density, decreasing pH, decreasing herbicide concentration and increasing electrolysis time, the herbicide degradation efficiency increased by 3DE pretreatment process. Based on the results of MBBR post-treatment process efficiency, with increasing HRT and filling ratio, the herbicide removal efficiency increased. According to the results, the highest removal efficiencies of 2,4-D and COD herbicides were obtained during HRT of 24 h, and the filling ratio of 70% were 97.33% and 88.95%, respectively. The consortium of 2,4-D degrading bacteria identified in this study included E. coli, Enterobacter spp., Bacillus spp., Alcaligenes spp., Proteus spp., Acinetobacter spp., Pseudomonas spp., Arthrobacter, and Brevundimonas vesicularis. In the MBBR biological process, the reaction kinetics followed the Grau second-order model (R 2 = 0.98). In general, the results showed that the combined process of 3DE with G/β-PbO2 anode and MBBR biological process has relatively high efficiency in 2,4-D herbicide degradation and can be used as a suitable complementary treatment method in wastewater containing non-degradable compounds such as phenoxy herbicides, e.g., 2,4-D should be used.

Mineralization of Methyl Orange azo dye by processes based on H2O2 electrogeneration at a 3D-like air-diffusion cathode

This work addresses the mineralization of the widely used Methyl Orange (MO) azo dye by technologies based on H₂O₂ electrogeneration at a 3D-like air-diffusion cathode. These include two Fe²⁺-catalyzed processes such as electro-Fenton (EF) and photoelectro-Fenton (PEF). Bulk electrolyses were performed in a recirculation flow plant, in which the Eco-Cell filter-press electrochemical reactor was connected in series with a UVA photoreactor. The former reactor was equipped with a Ti|Ir-Sn-Sb oxide plate anode alongside a 3D-like air-diffusion cathode made from graphite felt and hydrophobized carbon cloth, aimed at electrogenerating H₂O₂ on site. The influence of current density (j), volumetric flow rate (Q) and initial MO concentration was examined. The greatest oxidation power corresponded to PEF process. The best operation conditions to treat 30 mg L^-1 of total organic carbon of MO in a 50 mM Na₂SO₄ solution by PEF were found at 0.50 mM Fe²⁺, pH 3.0, j = 20 mA cm^-2 and Q = 2.0 L min^-1, obtaining 100% and 94% of color and TOC removals at 30 and 240-300 min, respectively. This accounted for 35% of mineralization current efficiency and 0.12 kWh (g TOC)^-1 of energy consumption at the end of the electrolysis. The oxidation power of EF and PEF was compared with that of anodic oxidation (AO), and the sequence obtained was: PEF > EF > AO. The dye was gradually degraded, yielding non-toxic short carboxylic acids, like maleic, fumaric, formic, oxalic and oxamic, whose Fe(III) complexes were rapidly photolyzed.

Efficient H2O2 generation and spontaneous OH conversion for in-situ phenol degradation on nitrogen-doped graphene: Pyrolysis temperature regulation and catalyst regeneration mechanism

H₂O₂ is a green and valuable chemical that can be electrochemically synthesis from oxygen reduction, offering in-situ application for organic pollutants removal in environmental remediation. However, how to improve activity and further convert into powerful radicals is a still challenge. Herein, we show a facile and general approach to fabricate nitrogen-doped graphene (N-GE) catalyst via pyrolysis temperature regulation. The optimal N-GE at 400 °C exhibited the highest active N content (12.2 wt.%) and H₂O₂ selectivity (85.45 %) and spontaneous OH production (19.42 μM), achieving a high phenol degradation (93.58 %) at 180 min in neutral pH condition. Importantly, a simple catalyst regeneration method and mechanism was disclosed. It is proposed that the conversion of graphite N and pyridinic N in N-GE plays an important role in oxygen reduction reaction (ORR) and OH conversion, while the conversion of pyridinic N-oxide to pyridinic N is critical to catalyst stability and sustainability. This study provides a new insight into structure design of electro-catalyst about stability of nitrogen-doped carbon materials for efficient H₂O₂ generation and cost-effective pollutants removal.

Adsorption, degradation, and mineralization of emerging pollutants (pharmaceuticals and agrochemicals) by nanostructures: a comprehensive review

This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.

In-situ dosage of Fe2+ catalyst using natural pyrite for thiamphenicol mineralization by photoelectro-Fenton process

The degradation of the antibiotic thiamphenicol has been studied by photoelectro-Fenton (PEF) process with UVA light using pyrite particles as catalyst source. Pyrite is a sulfide mineral that naturally acidifies the reaction medium and releases Fe²⁺, thus promoting the effective generation of OH from Fenton's reaction. The assays were made in an IrO₂/air-diffusion cell, which yielded similar results to a boron-doped diamond (BDD)/air-diffusion one at a lower cost. In dark conditions, electro-Fenton (EF) process showed an analogous ability for drug removal, but mineralization was much poorer because of the large persistence of highly stable by-products. Their photolysis explained the higher performance of PEF. Conventional homogeneous PEF directly using dissolved Fe²⁺ exhibited a lower mineralization power. This suggests the occurrence of heterogeneous Fenton's reaction over the pyrite surface. The effect of current density and drug content on pyrite-catalyzed PEF performance was examined. The drug heteroatoms were gradually converted into SO₄^2-, Cl^- and NO₃^- ions. Nine aromatic derivatives and two dichloroaliphatic amines were identified by GC-MS, and five short-chain carboxylic acids were detected by ion-exclusion HPLC. A reaction route for thiamphenicol mineralization by PEF process with continuous H₂O₂ and Fe²⁺ supply on site is proposed.

Highly efficient and stable FeIIFeIII LDH carbon felt cathode for removal of pharmaceutical ofloxacin at neutral pH

The traditional electro-Fenton (EF) has been facing major challenges including narrow suitable range of pH and non-reusability of catalyst. To overcome these drawbacks we synthesized Fe^IIFe^III-layered double hydroxide modified carbon felt (Fe^IIFe^III LDH-CF) cathode via in situ solvo-thermal process. Chemical composition and electrochemical characterization of Fe^IIFe^III LDH-CF were tested and analyzed. The apparent rate constant of decay kinetics of ofloxacin (OFC) with Fe^IIFe^III LDH-CF (0.18 min^-1) at pH 7 was more than 3 times higher than that of homogeneous EF (0.05 min^-1) at pH 3 with 0.1 mM Fe²⁺ under same current density (9.37 mA cm^-2). Also, a series of experiments including evolution of solution pH, iron leaching, OFC removal with trapping agent and quantitative detection of hydroxyl radicals (OH) were conducted, demonstrating the dominant role of OH generated by surface catalyst via ≡ Fe^II/Fe^III on LDH cathode for degradation of organics as well contributing to high efficiency and good stability at neutral pH. Besides, formation and evolution of aromatic intermediates, carboxylic acids and inorganic ions (F^-, NH₄⁺ and NO₃^-) were identified by High-Performance Liquid chromatography, Gas Chromatography-Mass Spectrometry and ionic chromatography analyses. These findings allowed proposing a plausible degradation pathway of OFC by OH generated in the heterogeneous EF process.

Graphene-Modified Composites and Electrodes and Their Potential Applications in the Electro-Fenton Process

In recent years, graphene-based materials have been identified as an emerging and promising new material in electro-Fenton, with the potential to form highly efficient metal-free catalysts that can be employed in the removal of contaminants from water, conserving precious water resources. In this review, the recent applications of graphene-based materials in electro-Fenton are described and discussed. Initially, homogenous and heterogenous electro-Fenton methods are briefly introduced, highlighting the importance of the generation of H2O2 from the two-electron reduction of dissolved oxygen and its catalysed decomposition to produce reactive and oxidising hydroxy radicals. Next, the promising applications of graphene-based electrodes in promoting this two-electron oxygen reduction reaction are considered and this is followed by an account of the various graphene-based materials that have been used successfully to give highly efficient graphene-based cathodes in electro-Fenton. In particular, graphene-based composites that have been combined with other carbonaceous materials, doped with nitrogen, formed as highly porous aerogels, three-dimensional materials and porous gas diffusion electrodes, used as supports for iron oxides and functionalised with ferrocene and employed in the more effective heterogeneous electro-Fenton, are all reviewed. It is perfectly clear that graphene-based materials have the potential to degrade and mineralise dyes, pharmaceutical compounds, antibiotics, phenolic compounds and show tremendous potential in electro-Fenton and other advanced oxidation processes.

A Highly Stable Metal-Organic Framework-Engineered FeS2/C Nanocatalyst for Heterogeneous Electro-Fenton Treatment: Validation in Wastewater at Mild pH

Herein, the novel application of FeS₂/C nanocomposite as a highly active, stable, and recyclable catalyst for heterogeneous electro-Fenton (EF) treatment of organic water pollutants is discussed. The simultaneous carbonization and sulfidation of an iron-based metal-organic framework (MOF) yielded well-dispersed pyrite FeS₂ nanoparticles of ∼100 nm diameter linked to porous carbon. XPS analysis revealed the presence of doping N atoms. EF treatment with an IrO₂/air-diffusion cell ensured the complete removal of the antidepressant fluoxetine spiked into urban wastewater at near-neutral pH after 60 min at 50 mA with 0.4 g L^-1 catalyst as optimum dose. The clear enhancement of catalytic activity and stability of the material as compared to natural pyrite was evidenced, as deduced from its characterization before and after use. The final solutions contained <1.5 mg L^-1 dissolved iron and became progressively acidified. Fluorescence excitation-emission spectroscopy with parallel factor analysis demonstrated the large mineralization of all wastewater components at 6 h, which was accompanied by a substantial decrease of toxicity. A mechanism with ^•OH as the dominant oxidant was proposed: FeS₂ core-shell nanoparticles served as Fe²⁺ shuttles for homogeneous Fenton's reaction and provided active sites for the heterogeneous Fenton process, whereas nanoporous carbon allowed minimizing the mass transport limitations.

Recent Trends in Removal Pharmaceuticals and Personal Care Products by Electrochemical Oxidation and Combined Systems

Due to various potential toxicological threats to living organisms even at low concentrations, pharmaceuticals and personal care products in natural water are seen as an emerging environmental issue. The low efficiency of removal of pharmaceuticals and personal care products by conventional wastewater treatment plants calls for more efficient technology. Research on advanced oxidation processes has recently become a hot topic as it has been shown that these technologies can effectively oxidize most organic contaminants to inorganic carbon through mineralization. Among the advanced oxidation processes, the electrochemical advanced oxidation processes and, in general, electrochemical oxidation or anodic oxidation have shown good prospects at the lab-scale for the elimination of contamination caused by the presence of residual pharmaceuticals and personal care products in aqueous systems. This paper reviewed the effectiveness of electrochemical oxidation in removing pharmaceuticals and personal care products from liquid solutions, alone or in combination with other treatment processes, in the last 10 years. Reactor designs and configurations, electrode materials, operational factors (initial concentration, supporting electrolytes, current density, temperature, pH, stirring rate, electrode spacing, and fluid velocity) were also investigated.

Catalytic Oxidation Process for the Degradation of Synthetic Dyes: An Overview

Dyes are used in various industries as coloring agents. The discharge of dyes, specifically synthetic dyes, in wastewater represents a serious environmental problem and causes public health concerns. The implementation of regulations for wastewater discharge has forced research towards either the development of new processes or the improvement of available techniques to attain efficient degradation of dyes. Catalytic oxidation is one of the advanced oxidation processes (AOPs), based on the active radicals produced during the reaction in the presence of a catalyst. This paper reviews the problems of dyes and hydroxyl radical-based oxidation processes, including Fenton's process, non-iron metal catalysts, and the application of thin metal catalyst-coated tubular reactors in detail. In addition, the sulfate radical-based catalytic oxidation technique has also been described. This study also includes the effects of various operating parameters such as pH, temperature, the concentration of the oxidant, the initial concentration of dyes, and reaction time on the catalytic decomposition of dyes. Moreover, this paper analyzes the recent studies on catalytic oxidation processes. From the present study, it can be concluded that catalytic oxidation processes are very active and environmentally friendly methods for dye removal.