Metal phosphide nanoparticles embedded in carbon as efficient electrocatalyst for oxygen evolution reaction

Highly Porous Carbon Flakes Derived from Cellulose and Nickel Phosphide Heterostructure towards Efficient Electrocatalysis of Oxygen Evolution Reaction

This study delves into the pressing challenges of climate change and the escalating carbon dioxide (CO2) emissions by exploring hydrogen technology as a sustainable alternative. In particular, there is focus on nickel phosphide-based electrocatalysts, known for their promising performance in hydrogen evolution reactions (HERs) and oxygen evolution reactions (OERs). Therefore, here we have designed a facile strategy to deliver highly porous carbon flakes derived from cellulose fibers via carbonization at 850 °C, yielding highly porous structures and outstanding specific surface area (SSAcel_carb_850_act = 3164 m2/g) after activation. As-fabricated carbon was utilized as a support for Ni12P5 with an optimized mass ratio. Electrochemical testing revealed that the composite of Ni12P5 and carbon flakes with a ratio of 100:1, respectively, exhibited the most favorable kinetics for the oxygen evolution reaction (OER). Importantly, the durability tests of this sample demonstrated the most stable behavior and lowest potential change under high current density among the studied samples, making it a promising candidate in practical applications. Moreover, the analysis of electrocatalysts after an OER does not show any changes, indicating that the sample does not undergo undesired intermediate reactions and that unwanted products are not released, explaining its stable behavior. This provides a straightforward approach for creating a cellulose-derived composite with enhanced electroactivity and durability.

A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts

Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.

Two-dimensional FeCo2O4 nanosheets with oxygen vacancies enable boosted oxygen evolution

Two dimensional FeCo2O4 nanosheets with abundant oxygen vacancies have been fabricated, which exhibit a superior OER performance compared to pristine FeCo2O4.

Different nanostructured CoP microcubes derived from metal formate frameworks with enhanced oxygen evolution reaction performance

Different nanostructured CoP microcubes derived from metal formate frameworks with enhanced oxygen evolution reaction performance.

Optimization of Oxygen Evolution Reaction with Electroless Deposited Ni-P Catalytic Nanocoating

The low efficiency of water electrolysis mostly arises from the thermodynamic uphill oxygen evolution reaction. The efficiency can be greatly improved by rationally designing low-cost and efficient oxygen evolution anode materials. Herein, we report the synthesis of Ni-P alloys adopting a facile electroless plating method under mild conditions on nickel substrates. The relationship between the Ni-P properties and catalytic activity allowed us to define the best conditions for the electroless synthesis of highperformance Ni-P catalysts. Indeed, the electrochemical investigations indicated an increased catalytic response by reducing the thickness and Ni/P ratio in the alloy. Furthermore, the Ni-P catalysts with optimized size and composition deposited on Ni foam exposed more active sites for the oxygen evolution reaction, yielding a current density of 10 mA cm-2 at an overpotential as low as 335 mV, exhibiting charge transfer resistances of only a few ohms and a remarkable turnover frequency (TOF) value of 0.62 s-1 at 350 mV. The present study provides an advancement in the control of the electroless synthetic approach for the design and large-scale application of high-performance metal phosphide catalysts for electrochemical water splitting.

Triphenylphosphine-Assisted Transformation of NiS to Ni2P through a Solvent-Less Pyrolysis Route: Synthesis and Electrocatalytic Performance

Straightforward synthetic routes to the preparation of transition metal phosphides or their chalcogenide analogues are highly desired due to their widespread applications, including catalysis. We report a facile and simple route for the preparation of a pure phase nickel phosphide (Ni₂P) and phase transformations in the nickel sulfide (NiS) system through a solvent-less synthetic protocol. Decomposition of different sulfur-based complexes (dithiocarbamate, xanthate, and dithiophosphonate) of nickel(II) was investigated in the presence and absence of triphenylphosphine (TPP). The optimization of reaction parameters (nature of precursor, ratio of TPP, temperature, and time) indicated that phosphorus- and sulfur-containing inorganic dithiophosphonate complexes and TPP (1:1 mole ratio) produced pure nickel phosphide, whereas different phases of nickel sulfide were obtained from dithiocarbamate and xanthate precursors in the presence or absence of TPP. A plausible explanation of the sulfide or phosphide phase formation is suggested, and the performance of Ni₂P was investigated as an electrocatalyst for supercapacitance and overall water-splitting reactions. The performance of Ni₂P with the surface free of any capping agents is not well explored, as common synthetic methods are solution-based routes; therefore, the electrocatalytic performance was also compared with metal phosphides, prepared by other routes. The highest specific capacitance of 367 F/g was observed at 1 A/g, and the maximum energy and power density of Ni₂P were calculated to be 17.9 Wh/kg and 6951 W/kg, respectively. The prepared nickel phosphide required overpotentials of 174 and 316 mV along with Tafel slopes of 115 and 95 mV/dec to achieve a current density of 10 mA/cm² for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), respectively.

Incorporation of silver nanoparticles into active antimicrobial nanocomposites: Release behavior, analyzing techniques, applications and safety issues

Employing new strategies to develop novel composite systems has become a popular area of interest among researchers. Raising people's awareness and their attention to the health and safety issues are key parameters to achieve this purpose. One of the recommended strategies is the utilization of nanoparticles within the matrix of composite materials to improve their physical, mechanical, structural and antimicrobial characteristics. Silver nanoparticles (Ag NPs) have attracted much attention for nanocomposite applications mainly due to their antimicrobial characteristics. Herein, the current review will focus on the different methods for preparing antimicrobial nanocomposites loaded with Ag NPs, the release of Ag NPs from these nanostructures in different media, analyzing techniques for the evaluation of Ag release from nanocomposites, potential applications, and safety issues of nanocomposites containing Ag NPs. The applications of Ag NPs-loaded nanocomposites have been extensively established in food, biomedical, textile, environmental and pharmacological areas mainly due to their antibacterial attributes. Several precautions should be addressed before implementation of Ag NPs in nanocomposites due to the health and safety issues.

Ultrathin 2D flower-like CoP@C with the active (211) facet for efficient electrocatalytic water splitting

Due to the more exposed (211) facet, the electrocatalytic water splitting activity of 2D CoP@C is superior to that of its counterpart 3D structure.

Amorphous Ni–Fe–Se hollow nanospheres electrodeposited on nickel foam as a highly active and bifunctional catalyst for alkaline water splitting

The electrodeposition of amorphous Ni–Fe–Se hollow nanospheres as a highly efficient bifunctional catalyst for the sustainable production of hydrogen.