Fabrication of a new ultrasensitive AuNPs-MIC-based sensor for electrochemical determination of streptomycin

An electrochemical aptasensor for detection of streptomycin based on signal amplification assisted by functionalized gold nanoparticles and hybridization chain reaction

A ratiometric electrochemical aptasensor based on gold nanoparticles (AuNPs) functionalization and hybridization chain reaction (HCR) assisted signal amplification has been for the first time designed for the detection of streptomycin (STR). The double-stranded DNA (dsDNA) formed by the hybridization of ferrocene (Fc)-labeled STR aptamer (Apt) and capture probe (CP) is first immobilized on the gold electrode (GE) surface via Au-S reaction. The specific binding of the target and Apt results in numerous Fc detachment from the sensing interface. Then, the remaining single-stranded CP is combined with AuNPs modified with initiator DNA (iDNA) by auxiliary DNA (aDNA). Among them, the iDNA triggers HCR between two hairpin probes (H1/H2), thus capturing a large number of methylene blue (MB) electrochemical probe, which generates a strong electrochemical signal of MB and a weak electrochemical signal of Fc. Signals are collected by square wave voltammetry (the potential window ranging from -0.5 V to 0.6 V, vs. Ag/AgCl ), and the oxidation peak currents at -0.200 V (MB) and 0.416 V (Fc) are recorded. The use of the ratiometric method has effectively improved the accuracy and reliability of the analysis. The successful application of AuNPs and HCR greatly improves the sensitivity of the sensor, and the detection limit is as low as 0.08 pM. It can sensitively determine STR in the range 0.1 pM to 10 nM. In addition, the designed aptasensor has been successfully applied to the detection of STR in milk and honey samples.

Zinc Oxide/Phosphorus-Doped Carbon Nitride Composite as Potential Scaffold for Electrochemical Detection of Nitrofurantoin

Herein, we present an electrocatalyst constructed by zinc oxide hexagonal prisms/phosphorus-doped carbon nitride wrinkles (ZnO HPs/P-CN) prepared via a facile sonochemical method towards the detection of nitrofurantoin (NF). The ZnO HPs/P-CN-sensing platform showed amplified response and low-peak potential compared with other electrodes. The exceptional electrochemical performance could be credited to ideal architecture, rapid electron/charge transfer, good conductivity, and abundant active sites in the ZnO HPs/P-CN composite. Resulting from these merits, the ZnO HPs/P-CN-modified electrode delivered rapid response (2 s), a low detection limit (2 nM), good linear range (0.01-111 µM), high sensitivity (4.62 µA µM^-1 cm²), better selectivity, decent stability (±97.6%), and reproducibility towards electrochemical detection of NF. We further demonstrated the feasibility of the proposed ZnO HPs/P-CN sensor for detecting NF in samples of water and human urine. All the above features make our proposed ZnO HPs/P-CN sensor a most promising probe for detecting NF in natural samples.

Cytochrome c/Multi-walled Carbon Nanotubes Modified Glassy Carbon Electrode for the Detection of Streptomycin in Pharmaceutical Samples

A novel electrochemical glassy carbon electrode modified with a multi-walled carbon nanotube, cytochrome c (Cyt c) and zinc oxide nanoparticles (ZnONPs) was fabricated to increase the sensitivity of electrode for the detection of streptomycin (STN) in certain pharmaceutical samples. Cyclic voltammetry (CV) and differential pulse voltammetry techniques were used for an electrochemical characterization of the electrode. Furthermore, the electrochemical biosensor construction phases were examined by using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR). Under the optimal experimental conditions, the electrode offers a high selectivity and sensitivity signaling in the co-existence method of STN with the linear concentration ranging from 0.02 to 2.2 μM. The detection limits (LOD) and limit of quantification (LOQ) were found to be 0.0028 and 0.0562 μM, respectively. The fabricated sensing electrode has good stability, reproducibility and sensitivity towards STN in the pharmaceutical samples. Preliminary determinations of binding sites within the specified grid box size, which covers both Cyt c and STN, were done by molecular docking analysis. Moreover, density functional theory (DFT) computations were performed to provide insightful information into the optimized geometry of STN.

Fabrication of an ultrasensitive aptasensor for precise electrochemical detection of the trace amounts of streptomycin in milk

Designing a sensitive method for the detection of streptomycin residues in animal products is essential for controlling consumer health risk. In this study, a high-purity pencil lead graphite electrode coated with inner graphene layers and outer surface-adsorbed gold nanoparticles attached to streptomycin-specific thiolated aptamer was used as an electrochemical aptasensor. The aptasensor electrode fabrication steps were investigated by scanning electron microscope (SEM) and Fourier-transform infrared spectrophotometer (FTIR). Moreover, aptasensor performance during fabrication and binding of aptamer to streptomycin were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. After the binding of sreptomycin to it's specific aptamer as a component of the aptasensor a decrease in the current and an increase in the charge transfer resistance (R_ct) were recorded using the above-mentioned techniques. Under optimal conditions, the novel ultra-sensetive designed aptansensor detects streptomycin in the range of  10^-8 to  10^-16 M with a LOD of 0.8×10^-18 M. The aptansensor demonstrates a high selectivity, good reproducibility and acceptable stability for the specific detection of streptomycin. According to the results, the manufactured aptansensor is a fast, low-cost, highly sensitive and selective device and thus the aptasensor can detect the trace amounts of streptomycin in milk in dairy industries.

An imprinted polymeric matrix containing DNA for electrochemical sensing of 2,4-dichlorophenoxyacetic acid

The authors describe an electrochemical method for the determination of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). It is based on the use of a molecularly imprinted polymer (MIP) and of dsDNA as a bio-specific substance. The modified electrode was prepared by electropolymerization of ortho-phenylenediamine (oPD) in the presence of DNA and of 2,4-D (the template). The imprinted MIP was placed on a pencil graphite electrode (PGE) modified with chitosan and multiwalled carbon nanotubes (MWCNTs). The template was removed with 0.4 M NaOH. The interaction of DNA with 2,4-D leads to its adsorption on the electrode, and this increases the sensitivity and selectivity of the method. After rebinding 2,4-D, the decrease in the peak current of oxidation of iron(II) acting as an electrochemical redox probe was measured by differential pulse voltammetry (DPV). The current, typically measured at around 0.5 V, increases linearly in the 0.01 to 10 pM 2,4-D concentration range, and the detection limit is 4.0 fM. The method is highly selective for 2,4-D. The modified electrode was applied to quantify 2,4-D in spiked environmental water and soil samples and gave absolute recoveries varying from 91.5 to 109.0%. Graphical abstractSchematic representation of the fabrication of an electrochemical sensor for determination of 2,4-dichlorophenoxyacetic acid (2,4-D). Initially, the electrode was modified with chitosan and MWCNTs and then a composite was formed on it consisting of ortho-phenylenediamine (oPD), DNA and 2,4-D.