Study of the mechanisms underlying the effects of composite intermediate layers on the performance of Ti/SnO2-Sb-La electrodes

Overlooked competition and promotion effects in electrochemical oxidation of humic acid and ammonia in landfill leachate

Electrochemical oxidation (EO) can effectively reduce the degree of humification and toxicity of landfill leachate by generating highly active oxidative species in situ. However, the selective and competitive oxidation of humic acid (HA) and ammonia (NH4+) and the role of different oxidative species during the EO process in complex aqueous conditions remain unclear. In this study, a nanostructured tin-antimony electrode (Ti/Sb-SnO2 NFs) was prepared and compared with three types of commercial electrodes (Ti/Ir-RuO2, Ti4O7, Ti/Sb-SnO2) in terms of electrochemical properties and electrocatalytic oxidation of HA and NH4+. The de-humification capacity, interactive effects of HA and NH4+ on each other's oxidation by different oxidative species, as well as the related oxidation byproducts were investigated. The differences in pollutant electrooxidation among the different electrodes were found to be insignificant. The presence of HA was found to be detrimental to NH4+ degradation while reducing the N2 conversion rate. Interestingly, NH4+ initially inhibited the degradation rates of HA while promoted the degradation and reduced the accumulation of organic chlorine during the later EO process. A proposed mechanism accounts for both competitive and promotional effects for simultaneous HA and NH4+ oxidation during the EO process.

Stabilized Hf-doped Ti/Sb-SnO2 electrode for efficient degradation of tetracycline

The electrochemical advanced oxidation process (EAOP) has shown significant promise in the field of refractory organic wastewater treatment due to its high efficiency and environmentally friendly nature. In this study, Ti/Sb-SnO2 electrodes with varying proportions of Hf were prepared using the sol-gel method. The addition of Hf transformed the original collapsing and broken surface into a flat and regular surface. The results demonstrated that Ti/Sb-SnO2-Hf electrode doped with 6% Hf exhibited a higher oxygen evolution potential (OEP) and excellent stability. The OEP increased from 2.315 V without Hf-doping to 2.482 V, and the corresponding actual life was 321.05% higher than that without Hf. The current density (5-40 mA·cm-2), electrolyte concentration (0.02-0.2 mol·L-1), pH (3-11), and initial pollutant concentration (5-80 mg·L-1) were evaluated to confirm the tetracycline (TC) degradation characterization of Ti/Sb-SnO2-6%Hf electrodes. It was concluded that under the optimal degradation conditions, the removal rate of TC could reach 99.66% within 2 h. The degradation of TC follows first-order reaction kinetics. The oxidative degradation of TC was achieved through indirect oxidation, with ·OH playing a dominant role. TC's electrochemical oxidation degradation pathway has been proposed: Based on LC-MS results, three main pathways are speculated. During the electrocatalytic oxidation process, decarboxylation, deamidation, and ring-opening reactions occur under ·OH attack, producing intermediate compounds with m/z values of 427, 433, 350, 246, 461, 424, 330, 352, 309, 263, and 233. These intermediates are further oxidized to intermediate compounds with an m/z value of 218. This work introduces a new efficient anode electrochemical catalyst for the degradation of TC, providing a strategy for industrial applications.

Preparation of La-doped Ti/SnO2-Sb2O4 anode and its electrochemical oxidation performance of rhodamine B

In this paper, La-doped Ti/SnO2-Sb2O4 electrode was prepared by electrodeposition and used for electrochemical degradation of rhodamine B. The optimum preparation conditions of the electrode were optimized as deposition time of 15 min and calcination at 500 ℃ for 2 h. The water treatment conditions were selected as initial pH 3.0, electrolyte Na2SO4 concentration 0.1 M, current density 30 mA cm-2, and initial rhodamine B concentration 20 mg L-1; the color and TOC removal of RhB reached 99.78% and 82.41% within 30 min. The FESEM, XRD, XPS, CV, LSV, and EIS characterization studies demonstrated that Ti/SnO2-Sb2O4-1%La electrode had a dense structure and the highest oxygen evolution potential (2.14 V) and lowest charge transfer resistance (0.198 Ω cm-2), indicating that doped La has lower energy consumption. Moreover, La doping can expand the specific surface area, active site, performance of pollutant degradation, and service life of the electrode. Especially, the service life of Ti/SnO2-Sb2O4-1%La is increased by three times, and the maximum life span reaches 90 min (1000 mA cm-2, 1 M H2SO4). Free radical quenching experiments show that ·OH plays a major role in the degradation of RhB. The Ti/SnO2-Sb2O4-1%La electrode prepared in this paper and its results will provide data support and reference for the design of efficient electrocatalytic electrode.

One-step synthesis of Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes used to degrade nitrobenzene

Ti/SnO2-Sb electrodes possess high catalytic activity and efficiently degrade nitrobenzene (NB); however, their low service life limits their wide application. In this study, we used one-step hydrothermal synthesis to successfully prepare Pt-Nd co-doped Ti/SnO2-Sb nanosphere electrodes. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were applied to characterize the surface morphology, microstructure, and chemical composition of the electrodes, respectively. The electrochemical activity and stability of the electrodes were characterized via linear sweep and cyclic voltammetry, electrochemical impedance spectroscopy, and an accelerated service life test; their performance for NB degradation was also studied. An appropriate amount of Pt-Nd co-doping refined the average grain size of SnO2 and formed a uniform and compact coating on the electrode surface. The oxygen evolution potential, total voltammetric charge, and electron transfer resistance of the Ti/SnO2-Sb-Nd-Pt electrodes were 1.88 V, 3.77 mC/cm2, and 11.50 Ω, respectively. Hydroxy radical was the main active radical species during the electrolytic degradation of nitrobenzene with Ti/SnO2-Sb-Nd-Pt. After Pt-Nd co-doping, the accelerated service life of the electrodes was extended from 8.0 min to 78.2 h (500 mA/cm2); although the NB degradation rate decreased from 94.1 to 80.6%, the total amount of theoretical catalytic degradation of NB in the effective working time increased from 17.4 to 8754.1 mg/cm2. These findings reveal good application potential for the electrodes and provide a reference for developing efficient and stable electrode materials.

Fabrication of nanofibrous PbO2 electrode embedded with Pt for decomposition of organic chelating agents

A new fabrication method of nanofibrous metal oxide electrode comprising Pt nanofiber (Pt-NF) covered with PbO2 on a Ti substrate was proposed. Pt-NF was obtained by performing sputtering deposition of Pt on the surface of electrospun poly(vinyl alcohol) (PVA) nanofiber on a Ti substrate, in which PVA was then removed by calcination (Ti/Pt-NF). Subsequently, by introducing PbO2 to the Ti/Pt-NF using the electrodeposition method, a nanofibrous Ti/Pt-NF/PbO2 electrode was finally obtained. Because the Ti substrate was covered by nanofibrous Pt, it had no environmental exposure and thus, was not oxidized during calcination. The crystal structure of the PbO2 mainly consisted of β-form rather than α-form; the β-form was suitable for electrochemical decomposition and remained stable even after 20 h of use. The nanofibrous Ti/Pt-NF/PbO2 electrodes showed 10% lower anode potential, 1.6 times higher current density at water decomposition potential, lower electrical resistance in the ion charge transfer resistance, and 2.27 times higher electrochemically active surface area than those of a planar-type Ti/Pt/PbO2 electrode, and demonstrated excellent electrochemical performance. As a result, compared with the planar electrode, the Ti/Pt-NF/PbO2 electrode showed more effective electrochemical decomposition toward nitrilotriacetic acid (80%) and ethylenediaminetetraacetic acid (83%), which are commonly used as chelating agents in nuclear decontamination.

Preparation of Yb-Sb co-doped Ti/SnO2 electrode for electrocatalytic degradation of sulfamethoxazole (SMX)

To efficiently break down residual sulfonamide antibiotics in environmental water, Yb-Sb co-doped Ti/SnO2 electrodes were fabricated using a solvothermal method. The effect of different amounts of Yb doping on the properties of the electrodes was studied. When the atom ratio of Sn: Yb is 100 : 7.5 in the preparation, the as-obtained coral-like electrodes (denoted as Yb 7.5%) possessed the smallest diameter of spherical particles on the surfaces, to result in the denser surface, highest electrocatalytic activity and smallest resistance of the electrode. As anode for electrocatalytic degradation of sulfamethoxazole, the Yb 7.5% electrode showed a degradation rate of 92% in 90 min, which was much higher than that of Yb 0% electrode (62.7% degradation rate). The electrocatalytic degradation of sulfamethoxazole was investigated with varying current densities and initial concentrations. Results indicated that the degradation process followed pseudo-first-order kinetics, and the degradation rate constants for Yb 7.5% and Yb 0% electrodes were 0.0278 min-1 and 0.0114 min-1, respectively. Furthermore, the service life of Ti/SnO2 electrodes was significantly improved after Yb doping, as demonstrated by accelerated life testing. Yb 7.5% exhibited a service life that was 2.7 times longer than that of Yb 0%. This work offers a new approach to construct Yb-Sb co-doped Ti/SnO2 electrodes with excellent electrooxidation activity and high stability for the electrochemical oxidation degradation of sulfamethoxazole.

Influence of Cu–Zn co-doping on the degradation performance of a Ti/SnO2–Sb anode

A Ti/SnO2–Sb–Cu–Zn electrode was prepared for the electrocatalytic oxidation of Acid Red 18 (AR18).

Co/La modified Ti/PbO2 anodes for chloramphenicol degradation: Catalytic performance and reaction mechanism

Chloramphenicol (CAP) is widely used in daily life, and its abuse hurts human health, so a suitable method is needed to solve the problem. In this study, the Ti/PbO₂ electrodes prepared by the electroplating method were characterized. The CAP degradation effect and mechanism were investigated. It was shown that the electrode surface had a dense plating with a characteristic peak of β-PbO₂ as the active component. The electrode had an oxygen precipitation potential of 1.695 V and a corrosion potential of 0.553 V, and a long service life (505.4 d). The degradation of CAP at Ti/PbO₂ electrode followed a first-order kinetic reaction. The optimal degradation conditions (current density of 12.97 mA cm^-2, electrolyte concentration of 50 mM, and solution pH of 6.38) were obtained by the response surface curve method. The degradation rate of CAP was 99.0% at 60 min. The results showed that the reactive groups leading to CAP degradation were mainly ·OH and SO₄^2-, and only a tiny portion of CAP was directly oxidized on the electrode surface. The addition of Cl^- favored the degradation of CAP, but reduced the mineralization rate. LC-MS analysis showed that ·OH mainly attacked the asymmetric centers (C1, C2) of weakly bound hydrogen atoms, resulting in underwent addition and substitution reactions. CAP was converted into two substances with m/z = 306 and m/z = 165. Finally, inorganic substances such as CO₂ and H₂O were generated. This study provided a new idea for preparing Ti/PbO₂ electrode with high performance and the safe and efficient degradation of CAP.

Electrochemical Degradation of Crystal Violet Using Ti/Pt/SnO2 Electrode

Today, organic wastes (paints, pigments, etc.) are considered to be a major concern for the pollution of aqueous environments. Therefore, it is essential to find new methods to solve this problem. This research was conducted to study the use of electrochemical processes to remove organic pollutants (e.g., crystal violet (CV)) from aqueous solutions. The galvanostatic electrolysis of CV by the use of Ti/Pt/SnO2 anode, were conducted in an electrochemical cell with 100 mL of solution using Na2SO4 and NaCl as supporting electrolyte, the effect of the important electrochemical parameters: current density (20–60 mA cm−2), CV concentration (10–50 mg L−1), sodium chloride concentration (0.01–0.1 g L−1) and initial pH (2 to 10) on the efficiency of the electrochemical process was evaluated and optimized. The electrochemical treatment process of CV was monitored by the UV-visible spectrometry and the chemical oxygen demand (COD). After only 120 min, in a 0.01 mol L−1 NaCl solution with a current density of 50 mA cm−2 and a pH value of 7 containing 10 mg L−1 CV, the CV removal efficiency can reach 100%, the COD removal efficiency is up to 80%. The process can therefore be considered as a suitable process for removing CV from coloured wastewater in the textile industries.

Facile synthesis of highly active Ti/Sb-SnO2 electrode by sol-gel spinning technique for landfill leachate treatment

Highly active Ti/Sb-SnO₂ electrodes were fabricated using sol-gel spin coating procedure, which exhibited a rough, uniform and multilayer coating structure. The effects of different Sb-SnO₂ film layers on the physiochemical, electrochemical properties and pollutant degradability of electrodes and the mechanism were evaluated on a systematic basis. The electrodes with more active layers exhibited higher electro-catalytic performance. Upon exceeding 8 layers, the promotion effect of the coating was reduced. Considering various factors, this paper recommends preparing Ti/Sb-SnO₂ electrodes coated with 8 layers to obtain higher electro-catalytic ability in landfill leachate treatment. The specific number of coating layers should be determined according to the electrode requirements. This work provided a theoretical basis and technical support for the preparation of Ti-SnO₂ electrodes with high electro-catalytic activity and stability, while it still remains a great challenge to achieve an excellent balance between performance and stability before Ti/Sb-SnO₂ electrodes can be implemented on a large scale in wastewater treatment.

Preparation of Ti/SnO2-Sb/Rare Earth Electrodes Containing Different Contents of Ni Intermediate Layer for Efficient Electrochemical Decolorization of Rhodamine B

Water contamination by dyes discharged from many industries is an environmental issue of great matter. Electrochemical oxidation is an advanced approach for wastewater treatment. In this study, the composite electrodes of Ti/SnO2-Sb-Ni/rare earth have been modified using rare earth elements (Re) Gd, Ce, Eu, and Er and various molar ratios of tin and nickel intermediate layer, and their electrochemical oxidation effects were scrutinized. To analyze the decolorization performance of the electrodes, Rhodamine B (RhB) dye was utilized as a target pollutant. Accelerated life testing indicated that the longer service life could be observed in Ni (3.5%)/Re and Ni (5%)/ Re electrodes compared with other modified Ni (0%, 1%, and 2%)/Re electrodes. Compared with the color removal efficiencies of the Ni (2%)/Re electrodes, the decolorization rate of 90% after treatment for 60 min and the low energy consumption of 3.621 kW h·m−3 can be achieved at the Ni (2%)/Gd electrode under the experimental condition of 100 mg·L−1 RhB. The best decolorization rate was observed at the Ni (2%)/Re electrodes among other Ni and no adding Ni-doped Re electrodes. The characterization of the electrodes was described, consisting of surface morphology, oxygen evolution potential, and a crystallographic and elemental combination of the coatings.

Preparation and Recent Developments of Ti/SnO2-Sb Electrodes

Ti/SnO2-Sb electrode, which is one of the dimensionally stable anode (DSA) electrodes, offers high specific conductivity, excellent electrocatalytic performance, and great chemical stability. For these reasons, Ti/SnO2-Sb electrode has been extensively studied in the fields of wastewater treatment. This review covers essential research work about the advanced oxidation technology and related DSA electrodes. It gives an overview of preparation methods of SnO2 electrodes, including sol-gel method, dip-coating method, electrodeposition method, chemical vapor deposition method, thermal decomposition method, magnetron sputtering method, and hydrothermal method. To extend service life and improve electrocatalytic efficiency, the review provides comprehensive details about the modification technologies of Ti/SnO2-Sb electrode, such as doping modification, composite modification, and structural modification. In addition, the review discusses common problems in industrial applications of Ti/SnO2-Sb electrode and highlights the promising outlook of Ti/SnO2-Sb electrode.

Fabrication and characterization of porous titanium-based PbO2 electrode through the pulse electrodeposition method: Deposition condition optimization by orthogonal experiment

Porous titanium-based PbO₂ electrodes were successfully fabricated by pulse electrodeposition method. The primary pulse electrodeposition parameters, including pulse frequency (f), duty ratio (γ), average current density (J_a) and electrodeposition time (t) were considered in this study. An orthogonal experiment was designed based on those four factors and in three levels. SEM images and XRD results suggest that the surface morphology and structure of PbO₂ electrodes could be easily changed by varying pulse electrodeposition parameters. Orthogonal analysis reveals that the increase of f and J_a could decrease the average grain size of PbO₂ electrodes, which is conducive to create more active sites and promote the generation of hydroxide radicals. The electrochemical degradation of Azophloxine was carried out to evaluate the electrochemical oxidation performance of pulse electrodeposited electrodes. The results indicate that the influences of four factors can be ranked as follow: J_a >γ≈ t > f. The higher f, larger J_a and longer t could facilitate the optimization of the integrated electrochemical degradation performance of prepared PbO₂ electrode. The accelerated life time is dominated by J_a and t, coincident with the average weight increase of β-PbO₂ layer. The optimal parameters of pulse electrodeposition turn out to be: f = 50 Hz, γ = 30%, J_a = 25 mA cm^-2, t = 60 min. Together, the consequences of the experiments give assistance to uncover and roughly conclude the mechanism of pulse electrodeposition.

Development of an Electrochemical Ceramic Membrane Bioreactor for the Removal of PPCPs from Wastewater

The removal of pharmaceutical and personal care products (PPCPs) from water and wastewater is of great significance for eco-system safety. In this study, an electrochemical ceramic membrane bioreactor (ECMBR) was developed for removing seven groups (24 kinds in total) of PPCPs from real wastewater. In the presence of an electric field (2 V/cm), the ECMBR could enhance the removal efficiencies for most targeted PPCPs without having adverse impacts on conventional pollutant removal and membrane filtration. The ECMBR achieved higher removal efficiencies for fluoroquinolones (82.8%), β-blockers (24.6%), and sulfonamides (41.0%) compared to the control (CMBR) (52.9%, 4.6%, and 36.4%). For trimethoprim, ECMBR also significantly increased the removal to 66.5% compared to 15.6% in CMBR. Furthermore, the exertion of an electric field did not cause significant changes in microbial communities, suggesting that the enhanced removal of PPCPs should be attributed to the electrochemical oxidation of the built-in electrodes in the ECMBR.

Accelerated Life Testing of a Palladium-Doped Tin Oxide Electrode for Zn Electrowinning

Electrowinning is a technique that can be used to obtain high-purity elements through electrolysis. The degradation of accelerated life testing for Pd-based electrodes is discussed in this study. The lifetime of the electrodes was examined by multiplying the acceleration rate with the current to measure the voltage of the electrodes. The acceleration rate was set to 10, 20, and 30 times. Four components were deposited on the TiO₂ plate. The ratio of Ir to Sn was fixed at 1:1, while Ta was deposited at 10 wt.%. Pd was deposited at 2, 4, 8 and 10 wt.% to create Pd-Ir/Sn-Ta. The initial voltage decreased as the Pd deposition amount increased irrespective of the acceleration rate. The lower the acceleration rate, the lower the voltage. An increase in the Pd content caused the initial voltage to be low. The multiple of the acceleration rate slightly increased for all cases of life testing for one year. When the test was conducted by increasing the current density by 20 times, the increase in voltage was proportional to the Pd deposition amount. However, for the 30 times acceleration rate, the lifetime of the electrodes was shortened as the Pd content increased. It can be inferred that the content of Pd and the ratio of Ir to Sn can influence the lifetime of the electrodes. According to these results, if the multiple of the acceleration rate is too extreme, the lifetime of the electrodes cannot be evaluated because they are damaged in an extreme situation.

Preparation of a SnO2–Sb electrode on a novel TiO2 network structure with long service lifetime for degradation of dye wastewater

Developing effective electrodes with long service lifetime for electrochemical degradation of dyes is of paramount importance for their practical industrial applications. We constructed a novel SnO₂–Sb electrode (Ti/TiO₂-NW/SnO₂–Sb electrode) based on a uniform TiO₂ network structure decorated Ti plate (Ti/TiO₂-NW) for a long-term electrocatalytic performance. The SnO₂–Sb coating layer on this electrode was grown on the Ti/TiO₂-NW by pulse electrodeposition. The introduction of the three-dimensional TiO₂-NW enhances the bonding strength between the Ti substrate and the SnO₂–Sb surface coating. An accelerated life test shows that the service life of Ti/TiO₂-NW/SnO₂–Sb electrode is 11.15 times longer than that of the traditional Ti/SnO₂–Sb electrode. The physicochemical properties of the electrodes were characterized through SEM, EDS, XRD and HRTEM. In addition, through LSV, EIS, CV and voltammetric charge analysis, it is found that compared with the traditional electrode, the Ti/TiO₂-NW/SnO₂–Sb electrode possesses a higher oxygen evolution potential, a lower charge transfer resistance and a larger electrochemical active surface area. Besides, this novel electrode also exhibits an outstanding electrocatalytic oxidation ability for degradation of acid red 73 in simulated sewage. After a 5 hours' test, the removal efficiency of acid red 73 and the COD reached 98.6% and 71.8%, respectively, which were superior to those of Ti/SnO₂–Sb electrode (89.1% and 58.8%). This study highlights the excellent stability of the Ti/TiO₂-NW/SnO₂–Sb electrode and provides an energy-efficient strategy for dye degradation.

A novel TiO₂ network structure modified SnO₂–Sb electrode has been prepared by electrodeposition with long service lifetime and low energy consumption.