Immobilizing Pd nanoclusters into electronically conductive metal-organic frameworks as bi-functional electrocatalysts for hydrogen evolution and oxygen reduction reactions

Ir NCs Embedded Co-MOF Nanosheets for Boosting Electrochemical Nitrate Reduction to Ammonia Performance

In this study, Ir nanoclusters adorned with abundant p-mercaptobenzoic acid (p-MBA) ligands were employed to fabricate an electrocatalytic material consisting of Ir nanoclusters embedded within two-dimensional Co-MOF nanosheets (Ir NCs@Co-MOF) for the electrocatalytic NO3- reduction reaction (NO3-RR). TEM analysis confirmed that Ir nanoclusters are uniformly distributed in 2D Co-MOF nanosheets, with an average diameter of about 1.8 nm. At a potential of -0.8 V vs RHE, the Ir NCs@Co-MOF catalyst achieved a nitrate conversion rate, ammonia selectivity, and yield of 92.5, 81.4%, and 230.1 μg·h-1·cm-2, respectively, over a reaction duration of 120 min. The strong interaction between Ir nanoclusters and Co-MOF serves to enhance electrocatalytic activity and accelerate the rate of nitrate reduction. Stability tests indicated that after 20 cycles, both the nitrate conversion and ammonia selectivity of the Ir NCs@Co-MOF catalyst demonstrated relative stability, thereby indicating a robust performance for this catalytic system. The results of EPR and TBA quenching experiments indicate that *H plays a key role in the NO3-RR process. In situ DEMS investigations revealed that during the NO3-RR process, the reaction pathway was as follows: *NO3 → *NO2 → *NO → *NOH → *NH2OH → *NH2 → *NH3 → NH3.

Facile and Rapid Synthesis of Ultra-Low-Loading Pt-Based Catalyst Boosting Electrocatalytic Hydrogen Production

The development of a low-cost hydrogen evolution reaction (HER) catalyst is crucial for the implementation of hydrogen production via water electrolysis. Herein, a facile and rapid electrodeposition method to synthesize an ultra-low-loading platinum-based catalyst in a short time of 120 s without any other chemical additive is reported. A functionalized nitrogen-doped carbon nanotube (F-N-CNT) is utilized as a carbon support to controllably and effectively anchor the Pt species. With partially oxidized and unzipped, the surface of F-N-CNT is characterized with zig-zag graphene-like nanodomains, which provide enriched deposition sites for Pt species and act as a buffer preventing the agglomeration and overloading of the Pt. Due to rational design of the interfacial chemical environment, the optimized Pt/F-N-CNTs catalyst possesses an ultra-low loading of 1.37 wt% but delivers a prominent HER activity superior to commercial 20 wt% Pt/C. Therefore, this work provides a novel approach to preparing the Pt-based catalyst with outstanding activity and rational loading.

Cluster Engineering in Water Catalytic Reactions: Synthesis, Structure-Activity Relationship and Mechanism

Four fundamental reactions are essential to harnessing energy from water sustainably: oxidation reduction reaction (ORR), oxygen reduction reaction (OER), hydrogen oxidation reaction (HOR), and hydrogen evolution reaction (HER). This review summarizes the research advancements in the electrocatalytic reaction of metal nanoclusters for water splitting. It covers various types of nanoclusters, particularly those at the size level, that enhance these catalytic reactions. The synthesis of cluster-based catalysts and the elucidation of the structure-activity relationships and reaction mechanisms are discussed. Emphasis is placed on utilizing atomically precise cluster materials and the interplay between the carrier and cluster in water catalysis, especially for applying catalytic engineering principles (such as synergy, coordination, heterointerface, and lattice strain engineering) to understand structure-activity relationships and catalytic mechanisms for cluster-based catalysts. Finally, the field of cluster water catalysis is summarized and prospected. We believe that developing cluster-based catalysts with high activity, excellent stability, and high selectivity will significantly promote the development of renewable energy conversion reactions.

Palladium nanoclusters as a label to determine GFAP in human serum from donors with stroke by bimodal detection: inductively coupled plasma-mass spectrometry and linear sweep voltammetry

Water-soluble, stable, and monodisperse palladium nanoclusters (PdNCs) were synthesized using NaBH4 as a reductant and lipoic acid as a ligand. PdNCs, measured by high-resolution transmission electron microscopy, showed a round shape and a diameter of 2.49 ± 0.02 nm. It was found that each PdNC contains 550 Pd atoms on average. These PdNCs offer high amplification as a label of biochemical reactions when inductively coupled plasma-mass spectrometry (ICP-MS) is used as a detector. In addition, PdNCs have catalytic activity on electrochemical reactions, allowing detection by linear sweep voltammetry (LSV). As a proof of applicability, a competitive immunoassay based on PdNC labels was developed for the determination of glial fibrillary acidic protein (GFAP) in human serum, comparing ICP-MS and LSV detection. GFAP is a biomarker for differentiating between patients with ischemic stroke (IS) and hemorrhagic stroke (HS). The limit of detection (LoD), corresponding to IC10 (4-parameter logistic curve), was 0.03 pM of GFAP, both by ICP-MS and LSV, being lower than the 0.31 pM LoD provided by the ELISA commercial kit. Using the error profile method, 0.03 pM and 0.11 pM LoDs were obtained respectively by ICP-MS and LSV: LoD is lower by ICP-MS due to the better precision of the measurements. The analyses of human serum samples from IS, HS, and control (CT) donors using PdNC labels and detection by ICP-MS and LSV were validated with a commercial ELISA kit (for CT donors only ICP-MS provided enough sensitivity). Results point out toward the future use of PdNCs as a label in other immunoprobes for the determination of specific proteins requiring very low LoDs as well as the development of electrochemical decentralized methodologies.

An inclusive review and perspective on Cu-based materials for electrochemical water splitting

In recent years, there has been a resurgence of interest in developing green and renewable alternate energy sources as a solution to the energy and environmental problems produced by conventional fossil fuel use. As a very effective energy transporter, hydrogen (H2) is a possible candidate for the future energy supply. Hydrogen production by water splitting is a promising new energy option. Strong, efficient, and abundant catalysts are required for increasing the efficiency of the water splitting process. Cu-based materials as an electrocatalyst have shown promising results for application in the Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) in water splitting. In this review, our aim is to cover the latest developments in the synthesis, characterisation, and electrochemical behaviour of Cu-based materials as a HER, and OER electrocatalyst, highlighting the impact that these advances have had on the field. It is intended that this review article will serve as a roadmap for developing novel, cost-effective electrocatalysts for electrochemical water splitting based on nanostructured materials with particular emphasis on Cu-based materials for electrocatalytic water splitting.

Recent advances in understanding and design of efficient hydrogen evolution electrocatalysts for water splitting: A comprehensive review

An unsustainable reliance on fossil fuels is the primary cause of the vast majority of greenhouse gas emissions, which in turn lead to climate change. Green hydrogen (H₂), which may be generated by electrolyzing water with renewable power sources, is a possible substitute for fossil fuels. On the other hand, the increasing intricacy of hydrogen evolution electrocatalysts that are presently being explored makes it more challenging to integrate catalytic theories, catalytic fabrication procedures, and characterization techniques. This review will initially present the thermodynamics, kinetics, and associated electrical and structural characteristics for HER electrocatalysts before highlighting design approaches for the electrocatalysts. Secondly, an in-depth discussion regarding the rational design, synthesis, mechanistic insight, and performance improvement of electrocatalysts is centered on both the intrinsic and extrinsic influences. Thirdly, the most recent technological advances in electrocatalytic water-splitting approaches are described. Finally, the difficulties and possibilities associated with generating extremely effective HER electrocatalysts for water-splitting applications are discussed.

Advances in the Electrocatalytic Hydrogen Evolution Reaction by Metal Nanoclusters-based Materials

With the development of renewable energy systems, clean hydrogen is burgeoning as an optimal alternative to fossil fuels, in which its application is promising to retarding the global energy and environmental crisis. The hydrogen evolution reaction (HER), capable of producing high-purity hydrogen rapidly in electrocatalytic water splitting, has received much attention. Abundant research about HER has been done, focusing on advanced electrocatalyst design with high efficiency and robust stability. As potential HER catalysts, metal nanoclusters (MNCs) have been studied extensively. They are composed of several to a hundred metal atoms, with sizes being comparable to the Fermi wavelength of electrons, that is, < 2.0 nm. Different from metal atoms/nanoparticles, they exhibit unique catalytic properties due to their quantum size effect and low-coordination environment. In this review, the activity-enhancing approaches of MNCs applied in HER electrocatalysis are mainly summarized. Furthermore, recent progress in MNCs classified with different stabilization strategies, that is, the freestanding MNCs, MNCs with organic, metal and carbon supports, are introduced. Finally, the current challenges and deficiencies of these MNCs for HER are prospected.

Pd-Supported Co3O4/C Catalysts as Promising Electrocatalytic Materials for Oxygen Reduction Reaction

This paper describes the activity of PdCo3O4/C obtained by wet impregnation towards the oxygen reduction reaction (ORR). For this purpose, the Co3O4/C substrate was synthesized using the microwave irradiation heating method with further annealing of the substrate at 400 °C for 3 h (Co3O4/C-T). Then, the initial Co3O4/C substrate was impregnated with palladium chloride (Pd-Cl2-Co3O4/C), and then part of the obtained Pd-Cl2-Co3O4/C catalyst was annealed at 400 °C for 3 h (PdOCo3O4/C). The electrocatalytic activity of the prepared catalysts was investigated for the oxygen reduction reaction in alkaline media and compared with the commercial Pt/C (Tanaka wt. 46.6% Pt) catalyst. It was found that the annealed PdOCo3O4/C catalyst showed the largest ORR current density value of −11.27 mA cm−2 compared with Pd-Cl2-Co3O4/C (−7.39 mA cm−2) and commercial Pt/C (−5.25 mA cm−2).

Rational Design of Better Hydrogen Evolution Electrocatalysts for Water Splitting: A Review

The excessive dependence on fossil fuels contributes to the majority of CO2 emissions, influencing on the climate change. One promising alternative to fossil fuels is green hydrogen, which can be produced through water electrolysis from renewable electricity. However, the variety and complexity of hydrogen evolution electrocatalysts currently studied increases the difficulty in the integration of catalytic theory, catalyst design and preparation, and characterization methods. Herein, this review first highlights design principles for hydrogen evolution reaction (HER) electrocatalysts, presenting the thermodynamics, kinetics, and related electronic and structural descriptors for HER. Second, the reasonable design, preparation, mechanistic understanding, and performance enhancement of electrocatalysts are deeply discussed based on intrinsic and extrinsic effects. Third, recent advancements in the electrocatalytic water splitting technology are further discussed briefly. Finally, the challenges and perspectives of the development of highly efficient hydrogen evolution electrocatalysts for water splitting are proposed.

A Synergistic effect on the atomic cluster M4 supported on MN4-graphene (M = Fe, Ni) for the hydrogen evolution reaction

The development of stable and efficient non-noble metal catalysts for the hydrogen evolution reaction (HER) can greatly promote the utilization of hydrogen energy. Herein, we investigated four potential model catalysts of the atomic cluster M₄ supported on MN₄-graphene substrates (M = Fe, Ni) from first-principles, i.e., Fe₄@FeN₄-Gr, Fe₄@NiN₄-Gr, Ni₄@FeN₄-Gr and Ni₄@NiN₄-Gr, respectively. Using density functional theory (DFT) calculations, the synergistic effect enhances the stability and HER activity of these supported M₄@MN₄-Gr. It is found that the Gibbs free energy of hydrogen adsorption (ΔG_H*) of Ni₄@FeN₄-Gr is only -0.168 eV with the best exchange current. We further explored the pH effect on the HER performance and determined the ideal pH range of these potential model catalysts. Four model catalysts can follow the Volmer-Tafel pathway if considering the implicit solvation effect. These results provide an effective guidance for the rational design of electro-catalysts.

Recent advances in MoS2-based materials for electrocatalysis

The increasing energy demand and related environmental issues have drawn great attention of the world, thus necessitating the development of sustainable technologies to preserve the ecosystems for future generations. Electrocatalysts...

Ultralow Ru-incorporated MoS2 nanosheet arrays for efficient electrocatalytic hydrogen evolution in dual-pH

Ru-MoS2/CC nanosheet arrays were prepared for efficient electrocatalytic hydrogen evolution reaction at dual-pH.

Homogeneous Distribution of Pt16(C4O4SH5)26 Clusters in ZIF-67 for Efficient Hydrogen Generation and Oxygen Reduction

In recent years, based on the high catalytic activities of metal nanoclusters (MNCs) and the unique porous structure of metal-organic frameworks (MOFs), much work has focused on MOF-confined small MNCs for catalysis applications. However, the commonly used "ship-in-boat" approach is unfeasible for precisely controlling the size and composition of the formed MNCs and meanwhile often causes structural distortion/degradation. On the other hand, the "bottle-around-ship" method usually has the disadvantages that MOFs show uncontrollable self-nucleation outside the MNCs and the stabilizers on the surface of MNCs may greatly reduce their catalytic activities. In this work, monodispersed Pt₁₆(C₄O₄SH₅)₂₆ clusters (Pt₁₆(MSA)₂₆) were first prepared and used as a precursor for the synthesis of Pt(MSA)@ZIF-67 via the typical Co-carboxylate type of linkage at the interface under ambient atmosphere. After encapsulating the Pt clusters in ZIF-67, the protecting ligands were removed under 300 °C to get surface-clean Pt₁₆ clusters confined in ZIF-67 (Pt@ZIF-67). The obtained Pt@ZIF-67 exhibited high catalytic activity for the hydrolysis of ammonia borane that was superior to that of most of the reported noble-metal catalysts. Meanwhile, by annealing the Pt(MSA)@ZIF-67 at 800 °C to form highly conductive graphitic carbon-coated Pt NCs and Co nanoparticles (NPs) (Pt/Co@NC), the obtained composite showed high catalytic activity for the oxygen reduction reaction (ORR). The formed Pt/Co@NC showed 9.6 times higher ORR mass activity (at 0.8 V) than Pt/C. This work provides a strategy to fabricate highly dispersed and stable metal clusters confined in the porous matrix for catalysis and shows that highly porous MOFs have promising catalysis applications by combining them with other active components.

Metal-Organic Frameworks and Metal-Organic Gels for Oxygen Electrocatalysis: Structural and Compositional Considerations

Increasing demand for sustainable and clean energy is calling for the next-generation energy conversion and storage technologies such as fuel cells, water electrolyzers, CO₂ /N₂ reduction electrolyzers, metal-air batteries, etc. All these electrochemical processes involve oxygen electrocatalysis. Boosting the intrinsic activity and the active-site density through rational design of metal-organic frameworks (MOFs) and metal-organic gels (MOGs) as precursors represents a new approach toward improving oxygen electrocatalysis efficiency. MOFs/MOGs afford a broad selection of combinations between metal nodes and organic linkers and are known to produce electrocatalysts with high surface areas, variable porosity, and excellent activity after pyrolysis. Some recent studies on MOFs/MOGs for oxygen electrocatalysis and their new perspectives in synthesis, characterization, and performance are discussed. New insights on the structural and compositional design in MOF/MOG-derived oxygen electrocatalysts are summarized. Critical challenges and future research directions are also outlined.

Pd-Doping-Induced Oxygen Vacancies in One-Dimensional Tungsten Oxide Nanowires for Enhanced Acetone Gas Sensing

Metal oxide semiconductors (MOS) with different nanostructures have been widely used as gas sensing materials due to the tunable interface structures and properties. However, further improvement of the sensing sensitivity and selectivity is still challenging in this area. Constructing appropriate heterogeneous interface structures and oxygen vacancies is one of the important strategies to tune the sensing properties of MOS. In the present study, interfacial heterostructures in Pd_xW₁₈O₄₉ nanowires (Pd_xW₁₈O₄₉ NWs) were fabricated and manipulated by doping different Pd contents through a simple hydrothermal process. Relevant characterization proved that the structure and composition of the one-dimensional (1D) nanomaterial can be effectively changed by Pd doping. It was found that the oxygen vacancy concentration increases first with the increase of Pd content, and when the Pd content increases to 7.18% (Pd_7.18%W₁₈O₄₉ NWs), the oxygen vacancy content reaches the maximum (52.5%). If the Pd content continues to increase, the oxygen vacancy ratio decreases. The gas sensing investigations illustrated that the Pd_xW₁₈O₄₉ NWs exhibited enhanced sensing properties than pure W₁₈O₄₉ NWs toward acetone. Among the as-prepared catalysts, the Pd_7.18%W₁₈O₄₉ NWs showed the best sensing response and the fastest response-recovery speeds (5 and 10 s, respectively) at a working temperature of 175 °C. In addition, this 1D nanostructure with fabricated heterostructures also delivers a good sensing selectivity and a wide detection range from 100 ppb to 300 ppm, with maintaining excellent performance in the presence of high concentrations of ethanol and carbon dioxide. The excellent gas sensing behavior could be attributed to the generated oxygen vacancies and the heterostructures upon Pd doping. This study offers a novel strategy for the design of high-performance gas sensors for ppb-level acetone sensing.

Recent progress in pristine MOF-based catalysts for electrochemical hydrogen evolution, oxygen evolution and oxygen reduction

Among various kinds of materials that have been investigated as electrocatalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), metal-organic frameworks (MOFs) has emerged as a promising material for electrocatalyzing these vital processes owing to their structural merits that integrate advantages of both homogeneous and heterogeneous catalysts; however there is still big room for their improvement in terms of inferior activity and poor conductivity, as well as the ambiguity of real active sites. In this review, advanced strategies with the aim of solving the activity and conductivity problems are summarized as microstructure engineering and conductivity improvement, respectively. The structural evolution of some MOFs and their real active species has also been discussed. Finally, perspectives on the development of MOF materials for HER, OER and ORR electrocatalysis are provided.

A novel Co-based MOF/Pd composite: synergy of charge-transfer towards the electrocatalytic oxygen evolution reaction

A novel Co-based MOF/Pd composite (LEEL-037/Pd-C) presented an electronic transference (Co 3d orbital → linkers π* → Pd 5S orbital) promoting an enhanced OH⁻ adsorption, thus improving the oxygen evolution reaction (OER) in alkaline medium.

CoMo-bimetallic N-doped porous carbon materials embedded with highly dispersed Pt nanoparticles as pH-universal hydrogen evolution reaction electrocatalysts

The hydrogen evolution reaction is a key half reaction for water electrolysis and is of great significance. Pt-based nanomaterials are promising candidates for HER electrocatalysts. However, the high price of platinum and poor durability impede their practical applications. Herein, a new CoMo-bimetallic hybrid zeolite imidazolate framework is employed to load Pt nanoparticles in a highly dispersed manner as a precursor to synthesize an efficient pH-universal HER electrocatalyst (PtCoMo@NC), which displays overpotentials of 26, 51, and 66 mV at a current density of 10 mA cm^-2 in acidic, basic, and neutral media, respectively. The strong synergistic effect of highly dispersed multi-type catalytic species, including cobalt, molybdenum carbide, and platinum (4.7%) promotes the catalytic activity in the HER process. Meanwhile, the aggregation of Pt nanoparticles is greatly restrained by the carbon matrix so that a brilliant long-time durability of 12 hours and a negligible current decrease in the LSV curve after 10 000 CV cycles are achieved.

Coordination polymers for n-type thermoelectric applications

Coordination polymers (CPs) are potential thermoelectric (TE) materials to replace the sometimes costly, brittle and toxic heavy metal inorganic TEs for near-ambient-temperature applications. Air-stable and highly conductive p-type thermoelectric CPs are relatively well known, but the their n-type counterparts are only now emerging and both are needed for most practical applications. This perspective reviews recent advances in the development of n-type thermoelectric CPs, particularly the 1D and 2D metal bisdithiolenes, and introduces a relatively new class of guest@metal-organic framework(MOF)-based composites. Low dimensional CPs with reasonable n-type thermoelectric performance are emerging with good charge mobility and air-stability but still relatively low electrical conductivity.

Advanced Electrocatalysts Based on Metal-Organic Frameworks

In recent years, metal-organic frameworks (MOFs) have been wildly studied as heterogeneous catalysts due to their diversity of structures and outstanding physical and chemical properties. Meanwhile, MOFs have also been regarded as promising templates for the synthesis of conductive and electrochemically active catalysts. However, in most of the studies, high-temperature annealing is needed to transform nonconductive or low-conductive MOFs to conductive materials for electrocatalyis, during which the unique structures and intrinsic active sites in MOFs can be easily destroyed. Therefore, in recent years, different strategies have been developed for improving the catalytic performances of MOF-based composites for electrochemical reactions with no need of post-treatment. This mini-review highlights the recent advances on MOF-based structures with improved conductivities and electrochemical activities for the application in electrocatalysis. Overall, the advanced MOF-based electrocatalysts include the highly conductive and electrochemically active pristine MOFs, MOFs combined with conductive substrates, and MOFs hybridized with active materials. Finally, we propose the direction for future works on MOF-based electrocatalysts.

Synergistic catalysis of Pd nanoparticles with both Lewis and Bronsted acid sites encapsulated within a sulfonated metal-organic frameworks toward one-pot tandem reactions

The development of a suitable catalytic system in the single catalyst has always been the pursuit for synthetic chemists in order to perform the traditional stepwise reactions in one-pot mode. In this work, an ultra-stable bifunctional catalyst of Pd@MIL-101-SO₃H was successfully constructed and applied in the one-pot oxidation-acetalization reaction whose products have been widely utilized as fuel additives, perfumes, pharmaceuticals and polymer chemistry. The excellent catalytic performance (>99% yields), on the one hand, can be ascribed to the synergistic effects of Pd NPs with both Lewis and Bronsted acid encapsulated within a sulfonated MIL-101(Cr). On the other hand, the exceptionally high capacity of water adsorption in MIL-101(Cr) could promote the equilibrium movement via interrupting the reversible process. More importantly, Pd@MIL-101-SO₃H is recyclable and can be reused for at least 8 times without sacrificing its catalytic activities. As far as we know, this is the first time that a water adsorption enhanced equilibrium movement of reversible reaction by porous catalyst to achieve high yields has been realized in Pd@MIL-101-SO₃H, which may provide an absolutely new and efficient strategy especially for designing reaction-oriented catalysts.

Engineering ultrasmall metal nanoclusters for photocatalytic and electrocatalytic applications

In view of many of the fundamental properties of ultrasmall noble metal nanoclusters progressively being uncovered, it has become increasingly clear that this class of materials has enormous potential for photocatalytic and electrocatalytic applications due to their unique electronic and optical properties. In this Minireview, we highlight the key electronic and optical properties of metal nanoclusters which are essential to photocatalysis and electrocatalysis. We further use these properties as the basis for our discussion to map out directions or principles for the rational design of high performance photocatalysts and electrocatalysts, highlighting several successful attempts along this direction.

Metal–Organic Frameworks Toward Electrocatalytic Applications

Metal–organic frameworks (MOFs) are a class of porous materials constructed from metal-rich inorganic nodes and organic linkers. Because of their regular porosity in microporous or mesoporous scale and periodic intra-framework functionality, three-dimensional array of high-density and well-separated active sites can be built in various MOFs; such characteristics render MOFs attractive porous supports for a range of catalytic applications. Furthermore, the electrochemically addressable thin films of such MOF materials are reasonably considered as attractive candidates for electrocatalysis and relevant applications. Although it still constitutes an emerging subfield, the use of MOFs and relevant materials for electrocatalytic applications has attracted much attention in recent years. In this review, we aim to focus on the limitations and commonly seen issues for utilizing MOFs in electrocatalysis and the strategies to overcome these challenges. The research efforts on utilizing MOFs in a range of electrocatalytic applications are also highlighted.