Engineering surface framework TiO6 single sites for unprecedented deep oxidative desulfurization

Catalytic oxidative desulfurization (ODS) using titanium silicate catalysts has emerged as an efficient technique for the complete removal of organosulfur compounds from automotive fuels. However, the precise control of highly accessible and stable-framework Ti active sites remains highly challenging. Here we reveal for the first time by using density functional theory calculations that framework hexa-coordinated Ti (TiO6) species of mesoporous titanium silicates are the most active sites for ODS and lead to a lower-energy pathway of ODS. A novel method to achieve highly accessible and homogeneously distributed framework TiO6 active single sites at the mesoporous surface has been developed. Such surface framework TiO6 species exhibit an exceptional ODS performance. A removal of 920 ppm of benzothiophene is achieved at 60°C in 60 min, which is 1.67 times that of the best catalyst reported so far. For bulky molecules such as 4,6-dimethyldibenzothiophene (DMDBT), it takes only 3 min to remove 500 ppm of DMDBT at 60°C with our catalyst, which is five times faster than that with the current best catalyst. Such a catalyst can be easily upscaled and could be used for concrete industrial application in the ODS of bulky organosulfur compounds with minimized energy consumption and high reaction efficiency.

CdS QDs grown on ellipsoidal BiVO4 for efficient photocatalytic degradation of tetracycline

Designing efficient, inexpensive, and stable photocatalysts to degrade organic pollutants and antibiotics has become an effective way for environmental remediation. In this work, we successfully performed in situ growth of CdS QDs on the surface of elliptical BiVO4 to try to show the advantage of the binary heterojuncted photocatalyst (BVO@CdS) for the photocatalytic degradation of tetracycline (TC). The In situ growth of CdS QDs can provide a large number of reactive sites and also generate a larger contact area with BiVO4. In addition, compared with mechanical composite materials, in situ growth can significantly reduce the energy barrier at the interface between BiVO4 and CdS, providing more channels for the separation and migration of photogenerated charge carriers, and further improving reaction activity. As a result, BVO@CdS-0.05 shows the best degradation efficiency, with a degradation rate of 88% after 30 min under visible light. The TC photodegradation follows a pseudo-second-order reaction with a dynamic constant of 0.472 min-1, which is 6.47 times that of pure BiVO4, 7.24 times that of pure CdS QDs and 2 times that of the mechanical composite. The degradation rate of BVO@CdS-0.05 decreases to 77.8% with a retention rate of 88.5% after four cycles, demonstrating excellent stability. Through liquid chromatography-mass spectrometry (LC-MS) analysis, two possible pathways for TC degradation are proposed. Through free radical capture experiments, electron spin resonance measurements, and photoelectrochemical comprehensive analysis, it is confirmed that BVO@CdS composites have constructed an efficient Z-scheme heterojunction via in situ growth, thereby highly enhancing the separation and transport efficiency of charge carriers.

Hierarchical Hollow TiO2@Bi2WO6 with Light-Driven Excited Bi(3-x)+ Sites for Efficient Photothermal Catalytic CO2 Reduction

Converting CO2 into valuable chemicals via sustainable energy sources is indispensable for human development. Photothermal catalysis combines the high selectivity of photocatalysis and the high yield of thermal catalysis, which is promising for CO2 reduction. However, the present photothermal catalysts suffer from low activity due to their poor light absorption ability and fast recombination of photogenerated electrons and holes. Here, a TiO2@Bi2WO6 heterojunction photocatalyst featuring a hierarchical hollow structure was prepared by an in situ growth method. The visible light absorption and photothermal effect of the TiO2@Bi2WO6 photocatalyst is promoted by a hierarchical hollow structure, while the recombination phenomenon is significantly mitigated due to the construction of the heterojunction interface and the existence of excited Bi(3-x)+ sites. Such a catalyst exhibits excellent photothermal performance with a CO yield of 43.7 μmol h-1 g-1, which is 15 and 4.7 times higher than that of pure Bi2WO6 and that of physically mixed TiO2/Bi2WO6, respectively. An in situ study shows that the pathway for the transformation of CO2 into CO over our TiO2@Bi2WO6 proceeds via two important intermediates, including COO- and COOH-. Our work provides a new idea of excited states for the design and synthesis of highly efficient photothermal catalysts for CO2 conversion.

Synergistic Protecting-Etching Synthesis of Carbon Nanoboxes@Silicon for High-Capacity Lithium-Ion Battery

Silicon (Si) is considered as the most likely choice for the high-capacity lithium-ion batteries owing to its ultrahigh theoretical capacity (4200 mA h g-1) being over 10 times than that of traditional graphite anode materials (372 mA h g-1). However, its widespread application is limited by problems such as a large volume expansion and low electrical conductivity. Herein, we design a hollow nitrogen-doped carbon-coated silicon (Si@Co-HNC) composite in a water-based system via a synergistic protecting-etching strategy of tannic acid. The prepared Si@Co-HNC composite can effectively mitigate the volume change of silicon and improve the electrical conductivity. Moreover, the abundant voids inside the carbon layer and the porous carbon layer accelerate the transport of electrons and lithium ions, resulting in excellent electrochemical performance. The reversible discharge capacity of 1205 mA h g-1 can be retained after 120 cycles at a current density of 0.5 A g-1. In particular, the discharge capacity can be maintained at 1066 mA h g-1 after 300 cycles at a high current density of 1 A g-1. This study provides a new strategy for the design of Si-based anode materials with excellent electrical conductivity and structural stability.

[Research progress and prospects of artificial intelligence in diagnosis and treatment of colorectal cancer]

Colorectal cancer is one of the most common malignant tumors worldwide. Due to the heterogeneity in patient outcomes and treatment responses to standard therapy regimens, personalized diagnostic and therapeutic strategies have remained a focus of sustained interest in research. In recent years, with the rapid progression of artificial intelligence (AI) technology in the medical field, an abundance of phased research results has emerged in the decision-making for preoperative, intraoperative, and postoperative diagnostic and therapeutic plans for colorectal cancer, demonstrating great potential for application. This new and efficient solution provides for the personalized evaluations and auxiliary diagnoses and treatments of patients with colorectal cancer. In the future, AI systems may continue to advance towards multimodal, multi-omics, and real-time directions. This paper aims to explore the current state of research on the multi-faceted auxiliary applications of AI in the diagnosis and treatment of colorectal cancer, as well as to present a prospective view of the innovations that AI technology could bring to personalized colorectal cancer treatment in the future and the challenges it may face.

[Association of sleep duration and physical exercise with dyslipidemia in older adults aged 80 years and over in China]

Objective: To explore the impact of sleep duration, physical exercise, and their interactions on the risk of dyslipidemia in older adults aged ≥80 (the oldest old) in China. Methods: The study subjects were the oldest old from four rounds of Healthy Aging and Biomarkers Cohort Study (2008-2009, 2011-2012, 2014 and 2017-2018). The information about their demographic characteristics, lifestyles, physical examination results and others were collected, and fasting venous blood samples were collected from them for blood lipid testing. Competing risk model was used to analyze the causal associations of sleep duration and physical exercise with the risk for dyslipidemia. Restricted cubic spline (RCS) function was used to explore the dose-response relationship between sleep duration and the risk for dyslipidemia. Additive and multiplicative interaction model were used to explore the interaction of sleep duration and physical exercise on the risk for dyslipidemia. Results: The average age of 1 809 subjects was (93.1±7.7) years, 65.1% of them were women. The average sleep duration of the subjects was (8.0±2.5) hours/day, 28.1% of them had sleep duration for less than 7 hours/day, and 27.2% had sleep for duration more than 9 hours/day at baseline survey. During the 9-year cumulative follow-up of 6 150.6 person years (follow-up of average 3.4 years for one person), there were 304 new cases of dyslipidemia, with an incidence density of 4 942.6/100 000 person years. The results of competitive risk model analysis showed that compared with those who slept for 7-9 hours/day, the risk for dyslipidemia in oldest old with sleep duration >9 hours/day increased by 22% (HR=1.22, 95%CI: 1.07-1.39). Compared with the oldest old having no physical exercise, the risk for dyslipidemia in the oldest old having physical exercise decreased by 33% (HR=0.67, 95%CI: 0.57-0.78). The RCS function showed a linear positive dose-response relationship between sleep duration and the risk for hyperlipidemia. The interaction analysis showed that physical exercise and sleep duration had an antagonistic effect on the risk for hyperlipidemia. Conclusion: Physical exercise could reduce the adverse effects of prolonged sleep on blood lipids in the oldest old.

[Two cases of acute methyl acetate poisoning]

This article analyzed the clinical data and on-site occupational health survey results of a patient with occupational acute methyl acetate poisoning in Zhejiang. Based on the pathways of methyl acetate poisoning and the characteristics of target organ damage, diagnosis and treatment experience were summarized, providing reference for the diagnosis and treatment of occupational acute methyl acetate poisoning and occupational health monitoring of methyl acetate.

Intraparticle ripening to create hierarchically porous Ti-MOF single crystals for deep oxidative desulfurization

The catalytic oxidative desulfurization (ODS) technique is able to remove sulfur compounds from fuels, conducive to achieving deep desulfurization for the good of the ecological environment. Ti-based metal-organic frameworks (Ti-MOFs) possessing good affinity to organic reactants and considerable numbers of Ti active sites are promising catalysts for ODS. However, current Ti-MOFs suffer from severe diffusion limitations caused by the size mismatch between sole micropores and bulky sulfur compounds, leading to poor ODS performance. Here, a facile method of intraparticle ripening without any additive is developed to obtain hierarchically meso-microporous Ti-MIL-125 single crystals (Meso-Ti-MIL-125) for the first time. Such Meso-Ti-MIL-125 shows a BET surface area of 1401 m2 g-1 and a mesoporous volume that is 1.7 times as high as that of the conventional Ti-MIL-125. Our novel Meso-Ti-MIL-125 exhibits excellent catalytic performance in the ODS of a series of bulky thiophenic sulfur compounds, completely removing benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (DMDBT) from model fuels, which is, respectively, 2.4 times, 1.5 times, and 6.7 times higher than the removal achieved with conventional Ti-MIL-125. Such a facile synthetic strategy is envisioned to be applied in many kinds of crystalline materials, such as zeolites, for industrial production.

Fractal Design of Hierarchical PtPd with Enhanced Exposed Surface Atoms for Highly Catalytic Activity and Stability

Hierarchical assembly of arc-like fractal nanostructures not only has its unique self-similarity feature for stability enhancement but also possesses the structural advantages of highly exposed surface-active sites for activity enhancement, remaining a great challenge for high-performance metallic nanocatalyst design. Herein, we report a facile strategy to synthesize a novel arc-like hierarchical fractal structure of PtPd bimetallic nanoparticles (h-PtPd) by using pyridinium-type ionic liquids as the structure-directing agent. Growth mechanisms of the arc-like nanostructured PtPd nanoparticles have been fully studied, and precise control of the particle sizes and pore sizes has been achieved. Due to the structural features, such as size control by self-similarity growth of subunits, structural stability by nanofusion of subunits, and increased numbers of exposed active atoms by the curved homoepitaxial growth, h-PtPd displays outstanding electrocatalytic activity toward oxygen reduction reaction and excellent stability during hydrothermal treatment and catalytic process.

Hierarchical zeolites containing embedded Cd0.2Zn0.8S as a photocatalyst for hydrogen production from seawater

Uncovering an efficient and stable photocatalytic system for seawater splitting is a highly desirable but challenging goal. Herein, Cd_0.2Zn_0.8S@Silicalite-1 (CZS@S-1) composites, in which CZS is embedded in the hierarchical zeolite S-1, were prepared and show remarkably high activity, stability and salt resistance in seawater.

The three-dimensionally ordered microporous CaTiO3 coupling Zn0.3Cd0.7S quantum dots for simultaneously enhanced photocatalytic H2 production and glucose conversion

Glucose conversion assisted photocatalytic water splitting technology to simultaneously produce H₂ and high value-added chemicals is a promising method for alleviating the energy shortage and environmental crisis. In this work, we constructing type II heterojunction by in-situ coupling Zn_0.3Cd_0.7S quantum dots (ZCS QDs) on three-dimensionally ordered microporous CaTiO₃ (3DOM CTO) for photocatalytic H₂ production and glucose conversion. The DFT calculations demonstrate that substitution of Zn on the Cd site improves the separation and transmission of photogenerated carriers. Therefore, 3DOM CTO-ZCS composite exhibits best H₂ production performance (2.81 mmol g^-1h^-1) and highest apparent quantum efficiency (AQY) (5.56 %) at 365 nm, which are about 47 and 18 times that of CTO nanoparticles (NPs). The improved catalytic performance ascribed to not only good mass diffusion and exchange, highly efficient light harvesting of 3DOM structure, but also the efficient charges separation of type Ⅱ heterojunction. The investigation on photocatalytic mechanism indicates that the glucose is mainly converted to gluconic acid and lactic acid, and the control reaction step is gluconic acid to lactic acid. The selectivity for gluconic acid on 3DOM CTO-ZCS is 85.65 %. Our work here proposes a green sustainable method to achieve highly efficient H₂ production and selective conversion of glucose to gluconic acid.

[Comparative study of medical common data models for FAIR data sharing]

The common data model (CDM) is an important tool to facilitate the standardized integration of multi-source heterogeneous healthcare big data, enhance the consistency of data semantic understanding, and promote multi-party collaborative analysis. The data collections standardized by CDM can provide powerful support for observational studies, such as large-scale population cohort study. This paper provides an in-depth comparative analysis of the data storage structure, term mapping pattern, and auxiliary tools development of the three international typical CDMs, then analyzes the advantages and limitations of each CDM and summarizes the challenges and opportunities faced in the CDM application in China. It is expected that exploring the advanced technical concepts and practical patterns of foreign countries in data management and sharing will provide references for promoting FAIR (findable, accessible, interoperable, reusable) construction of healthcare big data in China and solving the current practical problems, such as the poor quality of data resources, the low degree of semantization, and the inabilities of data sharing and reuse.

Identification and degradation of structural extracellular polymeric substances in waste activated sludge via a polygalacturonate-degrading consortium

By maintaining the cell integrity of waste activated sludge (WAS), structural extracellular polymeric substances (St-EPS) resist WAS anaerobic fermentation. This study investigates the occurrence of polygalacturonate in WAS St-EPS by combining chemical and metagenomic analyses that identify ∼22% of the bacteria, including Ferruginibacter and Zoogloea, that are associated with polygalacturonate production using the key enzyme EC 5.1.3.6. A highly active polygalacturonate-degrading consortium (GDC) was enriched and the potential of this GDC for degrading St-EPS and promoting methane production from WAS was investigated. The percentage of St-EPS degradation increased from 47.6% to 85.2% after inoculation with the GDC. Methane production was also increased by up to 2.3 times over a control group, with WAS destruction increasing from 11.5% to 28.4%. Zeta potential and rheological behavior confirmed the positive effect which GDC has on WAS fermentation. The major genus in the GDC was identified as Clostridium (17.1%). Extracellular pectate lyases (EC 4.2.2.2 and 4.2.2.9), excluding polygalacturonase (EC 3.2.1.15), were observed in the metagenome of the GDC and most likely play a core role in St-EPS hydrolysis. Dosing with GDC provides a good biological method for St-EPS degradation and thereby enhances the conversion of WAS to methane.

Unveiling the Intrinsic Structure and Intragrain Defects of Organic-Inorganic Hybrid Perovskites by Ultralow Dose Transmission Electron Microscopy

Transmission electron microscopy (TEM) is a powerful tool for unveiling the structural, compositional, and electronic properties of organic-inorganic hybrid perovskites (OIHPs) at the atomic to micrometer length scales. However, the structural and compositional instability of OIHPs under electron beam radiation results in misunderstandings of the microscopic structure-property-performance relationship in OIHP devices. Here, ultralow dose TEM is utilized to identify the mechanism of the electron-beam-induced changes in OHIPs and clarify the cumulative electron dose thresholds (critical dose) of different commercially interesting state-of-the-art OIHPs, including methylammonium lead iodide (MAPbI₃ ), formamidinium lead iodide (FAPbI₃ ), FA_0.83 Cs_0.17 PbI₃ , FA_0.15 Cs_0.85 PbI₃ , and MAPb_0.5 Sn_0.5 I₃ . The critical dose is related to the composition of the OIHPs, with FA_0.15 Cs_0.85 PbI₃ having the highest critical dose of ≈84 e Å^-2 and FA_0.83 Cs_0.17 PbI₃ having the lowest critical dose of ≈4.2 e Å^-2 . The electron beam irradiation results in the formation of a superstructure with ordered I and FA vacancies along <110>_c , as identified from the three major crystal axes in cubic FAPbI₃ , <100>_c , <110>_c , and <111>_c . The intragrain planar defects in FAPbI₃ are stable, while an obvious modification is observed in FA_0.83 Cs_0.17 PbI₃ under continuous electron beam exposure. This information can serve as a guide for ensuring a reliable understanding of the microstructure of OIHP optoelectronic devices by TEM.

Chelation-Assisted formation of carbon nanotubes interconnected Yolk-Shell Silicon/Carbon anodes for High-Performance Lithium-ion batteries

As a viable replacement to commercial graphite anodes, silicon (Si) anodes have gained much attention from academics because of their considerable theoretical specific capacity and appropriate reaction voltage. Nevertheless, some limitations still exist in developing silicon anodes, including significant volume expansion and poor electrical conductivity. Herein, the carbon nanotubes (CNTs) interconnected yolk-shell silicon/carbon anodes (YS-Si@CoNC) were prepared via the chelation competition induced polymerization (CCIP) approach. The YS-Si@CoNC anode, designed in this study, demonstrates improved performance. At the current density of 0.5 A g^-1 and 1 A g^-1, a capacity of 1001 mAh g^-1 and 956.5 mAh g^-1 can be achieved after 150 cycles and after 300 cycles, respectively. In particular, at the current density of 5 A g^-1, the reversible specific capacity of 688 mAh g^-1 is realized. The exceptional outcomes are mainly attributed to the internal voids that adequately alleviate the volumetric expansion and the CNTs and carbon shells that provide an efficient conducting matrix to fasten the diffusion of electrons and lithium-ions. Our research presents a convenient way of designing Si/C anode materials with a yolk-shell structure to guarantee impressive electrical conductivity and robust structural integrity for high-performance LIBs.

Mesoporous Pt@Pt-skin Pt3Ni core-shell framework nanowire electrocatalyst for efficient oxygen reduction

The design of Pt-based nanoarchitectures with controllable compositions and morphologies is necessary to enhance their electrocatalytic activity. Herein, we report a rational design and synthesis of anisotropic mesoporous Pt@Pt-skin Pt₃Ni core-shell framework nanowires for high-efficient electrocatalysis. The catalyst has a uniform core-shell structure with an ultrathin atomic-jagged Pt nanowire core and a mesoporous Pt-skin Pt₃Ni framework shell, possessing high electrocatalytic activity, stability and Pt utilisation efficiency. For the oxygen reduction reaction, the anisotropic mesoporous Pt@Pt-skin Pt₃Ni core-shell framework nanowires demonstrated exceptional mass and specific activities of 6.69 A/mg_pt and 8.42 mA/cm² (at 0.9 V versus reversible hydrogen electrode), and the catalyst exhibited high stability with negligible activity decay after 50,000 cycles. The mesoporous Pt@Pt-skin Pt₃Ni core-shell framework nanowire configuration combines the advantages of three-dimensional open mesopore molecular accessibility and compressive Pt-skin surface strains, which results in more catalytically active sites and weakened chemisorption of oxygenated species, thus boosting its catalytic activity and stability towards electrocatalysis.

Ti-MOF single-crystals featuring an intracrystal macro-microporous hierarchy for catalytic oxidative desulfurization

For the first time, we demonstrate a Ti-MOF (Ti-metal organic framework) single-crystal featuring an intracrystal macro-microporous hierarchy (Hier-NTU-9) by a vapor-assisted polymer-templated method. This Hier-NTU-9 possesses macropores (100-1000 nm) derived from polymer templates and enhanced transport ability of bulky molecules, exhibiting almost double the desulfurization activity compared to the conventional NTU-9.

Boosting molecular diffusion following the generalized Murray's Law by constructing hierarchical zeolites for maximized catalytic activity

Diffusion is an extremely critical step in zeolite catalysis that determines the catalytic performance, in particular for the conversion of bulky molecules. Introducing interconnected mesopores and macropores into a single microporous zeolite with the rationalized pore size at each level is an effective strategy to suppress the diffusion limitations, but remains highly challenging due to the lack of rational design principles. Herein, we demonstrate the first example of boosting molecular diffusion by constructing hierarchical Murray zeolites with a highly ordered and fully interconnected macro-meso-microporous structure on the basis of the generalized Murray's Law. Such a hierarchical Murray zeolite with a refined quantitative relationship between the pore size at each length scale exhibited 9 and 5 times higher effective diffusion rates, leading to 2.5 and 1.5 times higher catalytic performance in the bulky 1,3,5-triisopropylbenzene cracking reaction than those of microporous ZSM-5 and ZSM-5 nanocrystals, respectively. The concept of hierarchical Murray zeolites with optimized structural features and their design principles could be applied to other catalytic reactions for maximized performance.

Phase Conversion Accelerating "Zn-Escape" Effect in ZnSe-CFs Heterostructure for High Performance Sodium-Ion Half/Full Batteries

Sodium-ion batteries (SIBs) are considered as a promising large-scale energy storage system owing to the abundant and low-cost sodium resources. However, their practical application still needs to overcome some problems like slow redox kinetics and poor capacity retention rate. Here, a high-performance ZnSe/carbon fibers (ZnSe-CFs) anode is demonstrated with high electrons/Na⁺ transport efficiency for sodium-ion half/full batteries by engineering ZnSe/C heterostructure. The electrochemical behavior of the ZnSe-CFs heterostructure anode is deeply studied via in situ characterizations and theoretical calculations. Phase conversion is revealed to accelerate the "Zn-escape" effect for the formation of robust solid electrolyte interphase (SEI). This leads to the ZnSe-CFs delivering a superior rate performance of 206 mAh g^-1 at 1500 mA g^-1 for half battery and an initial discharge capacity of 197.4 mAh g^-1 at a current density of 1 A g^-1 for full battery. The work here heralds a promising strategy to synthesize advanced heterostructured anodes for SIBs, and provides the guidance for a better understanding of phase conversion anodes.

All-Inorganic Perovskite Single-Crystal Photoelectric Anisotropy

Engineering surface structure can precisely and effectively tune the optoelectronic properties of halide perovskites, but are incredibly challenging. Herein, the design and fabrication of uniform all-inorganic CsPbBr₃ cubic/tetrahedral single-crystals are reported with precise control of the (100) and (111) surface anisotropy, respectively. By combining with theoretical calculations, it is demonstrated that the preferred (100) surface engineering of the CsPbBr₃ single-crystals enables a lowest surface bandgap energy (2.33 eV) and high-rate carrier mobility up to 241 μm²  V^-1  s^-1 , inherently boosting their light-harvesting and carrier-transport capability. Meanwhile, the polar (111) surface induces ≈0.16 eV upward surface-band bending and ultrahigh surface defect density of 1.49 × 10¹⁵  cm^-3 , which is beneficial for enhancing surface-defects-catalyzed reactions. The work highlights the anisotropic surface engineering for boosting perovskite optoelectronic devices and beyond.

Improving the leak detection efficiency in water distribution networks using noise loggers

Leak detection techniques are effective ways of controlling water leakage in real water distribution networks (WDNs). Nevertheless, developing detection techniques for real WDNs has received little attention compared to the detection models developed based on laboratory simulated leaks. On the other hand, ambient noises and irregular water usage are difficult to simulate in a laboratory environment so detection models based on the laboratory simulated leaks are usually of low efficiency in practical applications. To achieve a better understanding of the detection models of real WDNs, machine learning (ML)-based leak detection models were developed in this work. This study employs wireless sensors to record acoustic signals emitted by real WDNs for the development of the leak detection models. The acquired acoustic signals are de-noised using the discrete wavelet transform. Thereafter, seventeen features are extracted from both the raw and de-noised signals using the principle of linear prediction, and the features are subsequently used for the development of the ML-based leak detection models. A thorough comparison is made for the performances of the detection models in terms of metal and non-metal WDNs, different features, and different ML algorithms, namely decision tree (DT), support vector machine (SVM), artificial neural network (ANN), and k-nearest neighbor (K-NN). Generally, the performance of the ML-based detection models developed by using the features extracted from de-noised signals has a better classification accuracy as compared to the performance of the models developed based on the features extracted from raw signals. For the de-noised signals, the accuracy, precision, and recall for the models developed based on the DT, SVM, and ANN algorithms are 100% for metal and non-metal WDNs.

Ultrafast and stable phase transition realized in MoTe2-based memristive devices

Phase engineering of two-dimensional transition metal dichalcogenides has received increasing attention in recent years due to its atomically thin nature and polymorphism. Here, we first realize an electric-field-induced controllable phase transition between semiconducting 2H and metallic 1T' phases in MoTe₂ memristive devices. The device performs stable bipolar resistive switching with a cycling endurance of over 10⁵, an excellent retention characteristic of over 10⁵ s at an elevated temperature of 85 °C and an ultrafast switching of ∼5 ns for SET and ∼10 ns for RESET. More importantly, the device works in different atmospheres including air, vacuum and oxygen, and even works with no degradation after being placed in air for one year, indicating excellent surrounding and time stability. In situ Raman analysis reveals that the stable resistive switching originates from a controllable phase transition between 2H and 1T' phases. Density functional theory calculations reveal that the Te vacancy facilitates the phase transition in MoTe₂ through decreasing the barrier between 2H and 1T' phases, and serving as nucleation sites due to the elimination of repulsive forces. This electric-field-induced controllable phase transition in MoTe₂ devices offers new opportunities for developing reliable and ultrafast phase transition devices based on atomically thin membranes.

Elucidating the production and inhibition of melanoidins products on anaerobic digestion after thermal-alkaline pretreatment

The refractory organics released from waste activated sludge (WAS) are unwanted produced in thermal-alkaline pretreatment, which are not well documented. In this study, we refer to them as melanoidins products (MPs) with characteristics of high molecular weight and inhibition to microbes. The results showed that these MPs from thermal-alkaline (80 °C and pH 10) pretreatment of WAS were identified with a broad molecular weight (>1000 Da). Dark-colored MPs were further verified from glucose and tryptophan as the model components, with values of UV280 and UV420 increasing. The produced MPs with a molecular weight of 1220, 6835, and even 21,200,000 Da were confirmed by SEC-HPLC. Unexpectedly, MPs were found to be electroactive with higher redox peak values than that of humic acids, which were almost not degraded by anaerobes as revealed by SEC-HPLC and 3D-EEM spectra. For the first time, the results demonstrated that MPs delayed volatile fatty acids production and reduced the methane yield (22-26% lower), which was likely attributed to the toxicity and/or electrons competition with anaerobes such as Methanosaeta. Thus, it is clear that MPs negatively impact anaerobic digestion after thermal-alkaline pretreatment, which shall be re-evaluated to minimize MPs when producing biochemicals from WAS.

Controlling volatile fatty acids production from waste activated sludge by an alginate-degrading consortium

It is desirable to control volatile fatty acids (VFAs) recovery from waste activated sludge (WAS) while avoiding the release of N and P. Structural extracellular polymeric substances (St-EPS), with typical components of alginate and polygalacturonic acid, resist the biodegradation of extracellular polymeric substances (EPS) in WAS. Previously, we purposely enriched an alginate-degrading consortium (ADC), but, both controlling VFAs production and cell integrity after dosing with ADC were not investigated. In this work, ADC with a high percentage of the genus Bacteroides (~67%) was further enriched with alginate utilization above 95%. The St-EPS content in WAS was 109.7 ± 3.3 mg/g-VSS, accounting for 31% of EPS. After dosing ADC in the WAS, the main metabolites were acetate (1.6 g/L) and propionate (0.7 g/L), the hydrolysis efficiency was increased to 38%, and the acidification efficiency was increased to 72%. Cell integrity was maintained during WAS fermentation by dosing with ADC according to no P release and unchanged lactate dehydrogenase activity. VFA production was mainly from the EPS, and protein degradation in EPS resulted in low N release (e.g., 212 mg/L from casein and no P release). Consequently, ADC doing offers the advantages of controlling VFAs production from EPS while maintaining cell integrity.

Identification of Extracellular Key Enzyme and Intracellular Metabolic Pathway in Alginate-Degrading Consortia via an Integrated Metaproteomic/Metagenomic Analysis

Uronic acid in extracellular polymeric substances is a primary but often ignored factor related to the difficult hydrolysis of waste-activated sludge (WAS), with alginate as a typical polymer. Previously, we enriched alginate-degrading consortia (ADC) in batch reactors that can enhance methane production from WAS, but the enzymes and metabolic pathway are not well documented. In this work, two chemostats in series were operated to enrich ADC, in which 10 g/L alginate was wholly consumed. Based on it, the extracellular alginate lyase (∼130 kD, EC 4.2.2.3) in the cultures was identified by metaproteomic analysis. This enzyme offers a high specificity to convert alginate to disaccharides over other mentioned hydrolases. Genus Bacteroides (>60%) was revealed as the key bacterium for alginate conversion. A new Entner-Doudoroff pathway of alginate via 5-dehydro-4-deoxy-d-glucuronate (DDG) and 3-deoxy-d-glycerol-2,5-hexdiulosonate (DGH) as the intermediates to 2-keto-3-deoxy-gluconate (KDG) was constructed based on the metagenomic and metaproteomic analysis. In summary, this work documented the core enzymes and metabolic pathway for alginate degradation, which provides a good paradigm when analyzing the degrading mechanism of unacquainted substrates. The outcome will further contribute to the application of Bacteroides-dominated ADC on WAS methanogenesis in the future.

Size effect of bifunctional gold in hierarchical titanium oxide-gold-cadmium sulfide with slow photon effect for unprecedented visible-light hydrogen production

Gold nanoparticles (Au NPs) with surface plasmonic resonance (SPR) effect and excellent internal electron transfer ability have widely been combined with semiconductors for photocatalysis. However, the in-depth effects of Au NPs in multicomponent photocatalysts have not been completely understood. Herein, ternary titanium oxide-gold-cadmium sulfide (TiO₂-Au-CdS, TAC) photocatalysts, based on hierarchical TiO₂ inverse opal photonic crystal structure with different Au NPs sizes have been designed to reveal the SPR effect and internal electron transfer of Au NPs in the presence of slow photon effect. It appears that the SPR effect and internal electron transfer ability of Au NPs, depending on their sizes, play a synergistic effect on the photocatalytic enhancement. The ternary TAC-10 photocatalyst with ~ 10 nm Au NPs demonstrates an unprecedented hydrogen evolution rate of 47.6 mmolh^-1g^-1 under visible-light, demonstrating ~ 48% enhancement comparing to the sample without slow photon effect. In particular, a 9.83% apparent quantum yield under 450 nm monochromatic light is achieved for TAC-10. A model is proposed and finite-difference time-domain (FDTD) simulations reveal the size influence of Au NPs in ternary TAC photocatalysts. This work suggests that the rational design of bifunctional Au NPs coupling with slow photon effect could largely promote hydrogen production from visible-light driven water splitting.

Single-cell yolk-shell nanoencapsulation for long-term viability with size-dependent permeability and molecular recognition

Like nanomaterials, bacteria have been unknowingly used for centuries. They hold significant economic potential for fuel and medicinal compound production. Their full exploitation, however, is impeded by low biological activity and stability in industrial reactors. Though cellular encapsulation addresses these limitations, cell survival is usually compromised due to shell-to-cell contacts and low permeability. Here, we report ordered packing of silica nanocolloids with organized, uniform and tunable nanoporosities for single cyanobacterium nanoencapsulation using protamine as an electrostatic template. A space between the capsule shell and the cell is created by controlled internalization of protamine, resulting in a highly ordered porous shell-void-cell structure formation. These unique yolk-shell nanostructures provide long-term cell viability with superior photosynthetic activities and resistance in harsh environments. In addition, engineering the colloidal packing allows tunable shell-pore diameter for size-dependent permeability and introduction of new functionalities for specific molecular recognition. Our strategy could significantly enhance the activity and stability of cyanobacteria for various nanobiotechnological applications.

Coproduction of hydrogen and lactic acid from glucose photocatalysis on band-engineered Zn1-xCdxS homojunction

Photocatalytic transformation of biomass into value-added chemicals coupled with co-production of hydrogen provides an explicit route to trap sunlight into the chemical bonds. Here, we demonstrate a rational design of Zn_1-xCd_xS solid solution homojunction photocatalyst with a pseudo-periodic cubic zinc blende (ZB) and hexagonal wurtzite (WZ) structure for efficient glucose conversion to simultaneously produce hydrogen and lactic acid. The optimized Zn_0.6Cd_0.4S catalyst consists of a twinning superlattice, has a tuned bandgap, and displays excellent efficiency with respect to hydrogen generation (690 ± 27.6 μmol·h⁻¹·g_cat.⁻¹), glucose conversion (~90%), and lactic acid selectivity (~87%) without any co-catalyst under visible light irradiation. The periodic WZ/ZB phase in twinning superlattice facilitates better charge separation, while superoxide radical (⋅O₂^-) and photogenerated holes drive the glucose transformation and water oxidation reactions, respectively. This work demonstrates that rational photocatalyst design could realize an efficient and concomitant production of hydrogen and value-added chemicals from glucose photocatalysis.

•

Zn_1-xCd_xS ZB-WZ homojunction was designed to improve charge separation efficiency

•

Bandgap engineering improved the hydrogen production from glucose photoreforming

•

Optimized Zn_0.6Cd_0.4S ZB-WZ exhibited high lactic acid yield and selectivity

•

Rational photocatalyst design realizes biomass valorization and H₂ coproduction

Melamine-based polymer networks enabled N, O, S Co-doped defect-rich hierarchically porous carbon nanobelts for stable and long-cycle Li-ion and Li-Se batteries

Li-Se battery is a promising energy storage candidate owing to its high theoretical volumetric capacity and safe operating condition. In this work, for the first time, we report using the whole organic Melamine-based porous polymer networks (MPNs) as a precursor to synthesize a N, O, S co-doped hierarchically porous carbon nanobelts (HPCNBs) for both Li-ion and Li-Se battery. The N, O, S co-doping resulting in the defect-rich HPCNBs provides fast transport channels for electrolyte, electrons and ions, but also effectively relieve volume change. When used for Li-ion battery, it exhibits an advanced lithium storage performance with a capacity of 345 mAh g^-1 at 500 mA g^-1 after 150 cycles and a superior rate capacity of 281 mAh g^-1 even at 2000 mA g^-1. Further density function theory calculations reveal that the carbon atoms adjacent to the doping sites are electron-rich and more effective to anchor active species in Li-Se battery. With the hierarchically porous channels and the strong dual physical-chemical confinement for Li₂Se, the Se@ HPCNBs composite delivers an ultra-stable cycle performance even at 2 C after 1000 cycles. Our work here suggests that introduce of heteroatoms and defects in graphite-like anodes is an effective way to improve the electrochemical performance.

[Systematic review of the qualitative researches on care experience of caregivers of burn children]

Objective: To systematically review the care experience of caregivers of burn children, so as to provide references for guiding the continuing care in hospitals, communities, and homes. Methods: Databases including Cochrane Library, PubMed, ScienceDirect, ProQuest, Web of Science, and CINAHL were retrieved with the search terms of " burn" , " care/caregivers/nursing/father/mother/relatives" , " needs/perceptions/exceptions/attitudes/feelings/demands/experiences" , " qualitative research" , and the Chinese Journals Full-text Database, China Biology Medicine disc, VIP Database, and Wanfang Data were retrieved with the search terms in Chinese version of "//" , "//////" , "/////" , "" to search the qualitative researches on care experience of caregivers of burn children published from the establishment of the databases to November 2019. After screening and extracting the data, the quality evaluation criteria for qualitative research of the Australian Joanna Briggs Institute Evidence-Based Health Care Center and its integrative/aggregative synthesis method were used to assess the quality of the included literature and meta-integrate the research results respectively. Results: A total of 16 studies and 269 caregivers were enrolled. The quality of one included literature was grade A, and the quality of 15 included literature was grade B. A total of 65 research results were extracted with totally 6 categories formed after summarization, and 2 integrated results obtained as follows: (1) The caregivers experienced heavy psychological pressure and burden in the care process, which had a significant impact on family, social relations, and daily life. (2) With the care time lapsing, through the support of all sectors of society and self-adjustment, the caregivers gradually accepted the reality and actively took various countermeasures, but they still faced many challenges in disease care. Conclusions: The caregivers of burn children have many physical and mental health problems and face many care challenges. The government, medical and health institutions, and society should give a great attention to these issues, improve the social support system and security system, reduce the family-related pressure of burn children's families, and improve the quality of family life.

n-p Heterojunction of TiO2-NiO core-shell structure for efficient hydrogen generation and lignin photoreforming

Hydrogen evolution from biomass photoreforming has been widely recognized as a promising strategy for relieving the pressure from energy crisis and environmental pollution, as it could generate sustainable H₂ and value-added bioproducts simultaneously. Combining p-type semiconductors with n-type semiconductors to form n-p heterojunction is an effective strategy to improve the photocatalytic quantum efficiency by enhancing the separation of photogenerated electrons and holes, which could greatly facilitate the realization of such biomass photorefinery concept. However, the incompact contact between the n-type and p-type semiconductors often induces the aggregation of photogenerated electrons and holes. In this work, we design and synthesize an ultrafine n-p heterojunction TiO₂-NiO core-shell structure to overcome the incompact contact in the n-p interface. When the n-p heterojunction photocatalysts are evaluated for photocatalytic water splitting and biomass lignin photoreforming respectively, the as-fabricated TiO₂-NiO nanocomposite with 3.25% NiO demonstrates the highest hydrogen generation of 23.5 mmol h^-1 g^-1 from water splitting and H₂ (0.45 mmol h^-1 g^-1) and CH₄ (0.03 mmol h^-1 g^-1) cogeneration with reasonable amount of fatty acids (palmitic acid and stearic acid) production from lignin photoreforming. The excellent photocatalytic activity is ascribed to the synergistic effects of high crystallinity of TiO₂ ultrafine nanoparticles, core-shell structure and n-p heterojunction with NiO nanoclusters. This present work demonstrates a simple and efficient method to fabricate ultrafine n-p heterojunction core-shell structure for noble-metal free catalyst for both water splitting and biomass photoreforming.

Universal Approach to Fabricating Graphene-Supported Single-Atom Catalysts from Doped ZnO Solid Solutions

Single-atom catalysts (SACs) have attracted widespread interest for many catalytic applications because of their distinguishing properties. However, general and scalable synthesis of efficient SACs remains significantly challenging, which limits their applications. Here we report an efficient and universal approach to fabricating a series of high-content metal atoms anchored into hollow nitrogen-doped graphene frameworks (M-N-Grs; M represents Fe, Co, Ni, Cu, etc.) at gram-scale. The highly compatible doped ZnO templates, acting as the dispersants of targeted metal heteroatoms, can react with the incoming gaseous organic ligands to form doped metal-organic framework thin shells, whose composition determines the heteroatom species and contents in M-N-Grs. We achieved over 1.2 atom % (5.85 wt %) metal loading content, superior oxygen reduction activity over commercial Pt/C catalyst, and a very high diffusion-limiting current (6.82 mA cm^-2). Both experimental analyses and theoretical calculations reveal the oxygen reduction activity sequence of M-N-Grs. Additionally, the superior performance in Fe-N-Gr is mainly attributed to its unique electron structure, rich exposed active sites, and robust hollow framework. This synthesis strategy will stimulate the rapid development of SACs for diverse energy-related fields.

Micron-Sized Zeolite Beta Single Crystals Featuring Intracrystal Interconnected Ordered Macro-Meso-Microporosity Displaying Superior Catalytic Performance

Zeolite Beta single crystals with intracrystalline hierarchical porosity at macro-, meso-, and micro-length scales can effectively overcome the diffusion limitations in the conversion of bulky molecules. However, the construction of large zeolite Beta single crystals with such porosity is a challenge. We report herein the synthesis of hierarchically ordered macro-mesoporous single-crystalline zeolite Beta (OMMS-Beta) with a rare micron-scale crystal size by an in situ bottom-up confined zeolite crystallization strategy. The fully interconnected intracrystalline macro-meso-microporous hierarchy and the micron-sized single-crystalline nature of OMMS-Beta lead to improved accessibility to active sites and outstanding (hydro)thermal stability. Higher catalytic performances in gas-phase and liquid-phase acid-catalyzed reactions involving bulky molecules are obtained compared to commercial Beta and nanosized Beta zeolites. The strategy has been extended to the synthesis of other zeolitic materials, including ZSM-5, TS-1, and SAPO-34.

Unprecedented and highly stable lithium storage capacity of (001) faceted nanosheet-constructed hierarchically porous TiO2/rGO hybrid architecture for high-performance Li-ion batteries

Active crystal facets can generate special properties for various applications. Herein, we report a (001) faceted nanosheet-constructed hierarchically porous TiO₂/rGO hybrid architecture with unprecedented and highly stable lithium storage performance. Density functional theory calculations show that the (001) faceted TiO₂ nanosheets enable enhanced reaction kinetics by reinforcing their contact with the electrolyte and shortening the path length of Li⁺ diffusion and insertion-extraction. The reduced graphene oxide (rGO) nanosheets in this TiO₂/rGO hybrid largely improve charge transport, while the porous hierarchy at different length scales favors continuous electrolyte permeation and accommodates volume change. This hierarchically porous TiO₂/rGO hybrid anode material demonstrates an excellent reversible capacity of 250 mAh g^–1 at 1 C (1 C = 335 mA g^–1) at a voltage window of 1.0–3.0 V. Even after 1000 cycles at 5 C and 500 cycles at 10 C, the anode retains exceptional and stable capacities of 176 and 160 mAh g^–1, respectively. Moreover, the formed Li₂Ti₂O₄ nanodots facilitate reversed Li⁺ insertion-extraction during the cycling process. The above results indicate the best performance of TiO₂-based materials as anodes for lithium-ion batteries reported in the literature.

Spatial Heterojunction in Nanostructured TiO2 and Its Cascade Effect for Efficient Photocatalysis

A highly efficient photoenergy conversion is strongly dependent on the cumulative cascade efficiency of the photogenerated carriers. Spatial heterojunctions are critical to directed charge transfer and, thus, attractive but still a challenge. Here, a spatially ternary titanium-defected TiO₂@carbon quantum dots@reduced graphene oxide (denoted as V_Ti@CQDs@rGO) in one system is shown to demonstrate a cascade effect of charges and significant performances regarding the photocurrent, the apparent quantum yield, and photocatalysis such as H₂ production from water splitting and CO₂ reduction. A key aspect in the construction is the technologically irrational junction of Ti-vacancies and nanocarbons for the spatially inside-out heterojunction. The new "spatial heterojunctions" concept, characteristics, mechanism, and extension are proposed at an atomic-/nanoscale to clarify the generation of rational heterojunctions as well as the cascade electron transfer.

One-Step Growth of Amorphous/Crystalline Ga2O3 Phase Junctions for High-Performance Solar-Blind Photodetection

The pursuit of high-performance photodetectors functioning in the solar-blind spectrum is motivated by both scientific and practical applications ranging from secure communication, monitoring, sensing, etc. In particular, the fabrication of heterojunctions based on the wide band gap semiconductors has emerged as an attractive strategy to promote the high-efficient photogenerated electron/hole pair separation. However, the precisely controlled growth of heterojunctions remains a huge challenge. The lattice mismatch leads to the formation of defects and/or dislocations at the interface, deteriorating the performance of devices and limiting their envisioned applications. Here, we demonstrate a simple one-step growth of amorphous/crystalline Ga₂O₃ phase junctions by using sputtering technique, yielding a large responsivity of 0.81 A/W, a superior photo-to-dark current ratio over 10⁷, and an ultrahigh response speed of ∼12 ns. Compared to the previous reported solar-blind photodetectors, the obtained detectivity ≈ 5.67 × 10¹⁴ Jones is increased by 2 orders of magnitude. Such excellent photoresponse characteristics can be understood by the interfacial built-in field-promoted electron/hole pair separation for the amorphous/crystalline Ga₂O₃ phase junctions. Our results provide a novel path toward realizing high-performance optoelectronics functioning in the solar-blind spectrum.

Synergistic catalysis of Pd nanoparticles with both Lewis and Bronsted acid sites encapsulated within a sulfonated metal-organic frameworks toward one-pot tandem reactions

The development of a suitable catalytic system in the single catalyst has always been the pursuit for synthetic chemists in order to perform the traditional stepwise reactions in one-pot mode. In this work, an ultra-stable bifunctional catalyst of Pd@MIL-101-SO₃H was successfully constructed and applied in the one-pot oxidation-acetalization reaction whose products have been widely utilized as fuel additives, perfumes, pharmaceuticals and polymer chemistry. The excellent catalytic performance (>99% yields), on the one hand, can be ascribed to the synergistic effects of Pd NPs with both Lewis and Bronsted acid encapsulated within a sulfonated MIL-101(Cr). On the other hand, the exceptionally high capacity of water adsorption in MIL-101(Cr) could promote the equilibrium movement via interrupting the reversible process. More importantly, Pd@MIL-101-SO₃H is recyclable and can be reused for at least 8 times without sacrificing its catalytic activities. As far as we know, this is the first time that a water adsorption enhanced equilibrium movement of reversible reaction by porous catalyst to achieve high yields has been realized in Pd@MIL-101-SO₃H, which may provide an absolutely new and efficient strategy especially for designing reaction-oriented catalysts.

Construction of Hierarchical Metal-Organic Frameworks by Competitive Coordination Strategy for Highly Efficient CO2 Conversion

Hierarchical porosity and functionalization help to fully make use of metal-organic frameworks (MOFs) for their diverse applications. Herein, a simple strategy is reported to construct hierarchically porous MOFs through a competitive coordination method using tetrafluoroborate (M(BF₄ )_x , where M is metal site) as both functional sites and etching agents. The resulting MOFs have in situ formed defect-mesopores and functional sites without sacrificing their structure stability. The formation mechanism of the defect-mesopores is elucidated by a combination of experimental and first-principles calculation method, indicating the general feasibility of this new approach. Compared with the original microporous counterparts, the new hierarchical MOFs exhibit superior adsorption for the bulky dye molecules and catalytic performance for the CO₂ conversion attributed to their specific hierarchical pore structures.

[Investigation and analysis of quality of life of some pneumoconiosis patients in Hangzhou]

Objective: To understand the quality of life and influencing factors of patients with pneumoconiosis, and to provide a basis for formulating targeted improvement strategies to improve the quality of life. Methods: From April to December 2018, Questionnaire survey was conducted on patients with pneumoconiosis that diagnosed in Hangzhou Hospital for the Prevention and Treatment of Occupational Disease, using self-made questionnaire and SF-36.237 valid questionnaires were used to investigate the basic conditions, health services, social assistance and quality of life of patients, and analyze the influencing factors of quality of life. Results: Hangzhou city's some pneumoconiosis patients were mostly with monthly income <3000 yuan (72.6%, 172/237) ; more patients with medical expenses of 8000 to 25000 yuan per year (60.3%, 143/237) ; The proportion of patients receiving medical assistance and work-related injury insurance was low, at 2.1% (5/237) and 23.8% (54/227) respectively. The scores of Pneumoconiosis patients in PhysicalFunction (PF) , Role-Physical (RP) , Bodily Pain (BP) , General Health (GH) , Vitality (VT) , Social Function (SF) , Role-Emotional (RE) and Mental Health (MH) were lower than the national norm (P<0.05) . The scores from high to low were BP, SF, MH, PF, VT, RE, RP and GH. There were significant differences in the quality of life scores of pneumoconiosis patients with different ages, work types, education levels and monthly income (P<0.05) . Conclusion: The quality of life of some patients with pneumoconiosis in Hangzhou is lower than that of the general population. Age, work types, and monthly income are factors influencing quality of life.

In-Situ Growing Mesoporous CuO/O-Doped g-C3N4 Nanospheres for Highly Enhanced Lithium Storage

The development of lithium-ion batteries using transition metal oxides has recently become more attractive, due to their higher specific capacities, better rate capability, and high energy densities. Herein, the in situ growth of advanced mesoporous CuO/O-doped g-C₃N₄ nanospheres is carried out in a two step hydrothermal process at 180 °C and annealing in air at 300 °C. When used as an anode material, the CuO/O-doped g-C₃N₄ nanospheres achieve a high reversible discharge specific capacity of 738 mAhg^-1 and a capacity retention of ∼75.3% after 100 cycles at a current density 100 mAg^-1 compared with the pure CuO (412 mAhg^-1, 47%) and O-doped g-C₃N₄ (66 mAhg^-1, 53%). Even at high current density 1 Ag^-1, they exhibit a reversible discharge specific capacity of 503 mAhg^-1 and capacity retention ∼80% over 500 cycles. The excellent electrochemical performance of the CuO/O-doped g-C₃N₄ nanocomposite is attributed to the following factors: (I) the in situ growing CuO/O-doped g-C₃N₄ avoids CuO nanoparticle aggregation, leading to the improved lithium ion transfer and electrolyte penetration inside the CuO/O-doped g-C₃N₄ anode, thus promoting the utilization of CuO; (II) the porous structure provides efficient space for Li⁺ transfer during the insertion/extraction process to avoid large volume changes; (III) the O-doping g-C₃N₄ decreases its band gap, ensuring the increased electrical conductivity of CuO/O-doped g-C₃N₄; and (IV) the strong interaction between CuO and O-doped g-C₃N₄ ensures the stability of the structure during cycling.

[Analysis of lens of 1720 medical application radiology workers in Hangzhou]

Objective: To analyze the lens opacity of some hospitals in Hangzhou to provide evidence for further improvement of radiation protection. Methods: Physical examination data of 1720 radiological workers who underwent occupational disease physical examination in our hospital on January1, 2016and December 31, 2017 were collected. Lens turbidity, gender, age, type of work, radiological working age and other influencing factors were statistically analyzed, and logistic regression analysis was used for multipactor analysis. Results: A total of 112 cases of lens turbidity (turbidity rate 6.51%) , after lens turbidity, subcapsular majority (64 cases (57.14%) ) ; lens turbidity increased with age, and showed an increasing trend of radiation working age; the lens turbidity rate was different in different types of work, including nuclear medicine (23.33%) 、radiology (6.76%) 、interventional radiology (6.06%) 、dental radiology (4.26%) and radiotherapy (4.21%) . Type of work、age and length of service are risk factors for lens opacity; Age and type of work were independent risk factors for lens opacity. Conclusion: The turbidity of lens of radiologcial workers is related to age and workering age. Radiological workers engaged in nuclear medicine should strictly strengthen radiation protection.