Anion Binding Interaction Enhances the Robustness of Iodide for High-Performance Perovskite Solar Cells

Owing to the ionic bond nature of the Pb-I bond, the iodide at the interface of perovskite polycrystalline films was easily lost during the preparation process, resulting in the formation of a large number of iodine vacancy defects. The presence of iodine vacancy defects can cause nonradiative recombination, provide a pathway for iodide migration, and be harmful to the power conversion efficiency (PCE) and stability of organic-inorganic hybrid perovskite solar cells (HPSCs). Here, in order to increase the robustness of iodides at the interface, a strategy to introduce anion binding effects was developed to stabilize the perovskite films. It was demonstrated that the N,N'-diphenylurea (DPU), characterized by high anionic binding constants and a Y-shaped structure, provides a relatively strong hydrogen bond donor site to effectively reduce the iodine loss during film preparation and inhibits iodide migration in the device working condition. As expected, the reduced iodine loss considerably improves the quality of the perovskite films and suppresses nonradiative recombination. The performance of the device after DPU modification was significantly increased, with the PCE rising from 23.65 to 25.01% with huge stability enhancement as well.

Regulating Hetero-Nucleation Enabling Over 14% Efficient Kesterite Solar Cells

Developing well-crystallized light-absorbing layers remains a formidable challenge in the progression of kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. A critical aspect of optimizing CZTSSe lies in accurately governing the high-temperature selenization reaction. This process is intricate and demanding, with underlying mechanisms requiring further comprehension. This study introduces a precursor microstructure-guided hetero-nucleation regulation strategy for high-quality CZTSSe absorbers and well-performing solar cells. The alcoholysis of 2-methoxyethanol (MOE) and the generation of high gas-producing micelles by adding hydrogen chloride (HCl) as a proton additive into the precursor solution are successfully suppressed. This tailored modification of solution components reduces the emission of volatiles during baking, yielding a compact and dense precursor microstructure. The reduced-roughness surface nurtures the formation of larger CZTSSe nuclei, accelerating the ensuing Ostwald ripening process. Ultimately, CZTSSe absorbers with enhanced crystallinity and diminished defects are fabricated, attaining an impressive 14.01% active-area power conversion efficiency. The findings elucidate the influence of precursor microstructure on the selenization reaction process, paving a route for fabricating high-quality kesterite CZTSSe films and high-efficiency solar cells.

Chemical Reaction of FA Cations Enables Efficient and Stable Perovskite Solar Cells

Organometal halide perovskite solar cells (PSCs) have received great attention owing to a rapid increase in power conversion efficiency (PCE) over the last decade. However, the deficit of long-term stability is a major obstacle to the implementation of PSCs in commercialization. The defects in perovskite films are considered as one of the primary causes. To address this issue, isocyanic acid (HNCO) is introduced as an additive into the perovskite film, in which the added molecules form covalent bonds with FA cations via a chemical reaction. This chemical reaction gives rise to an efficient passivation on the perovskite film, resulting in an improved film quality, a suppressed non-radiation recombination, a facilitated carrier transport, and optimization of energy band levels. As a result, the HNCO-based PSCs achieve a high PCE of 24.41% with excellent storage stability both in an inert atmosphere and in air. Different from conventional passivation methods based on coordination effects, this work presents an alternative chemical reaction for defect passivation, which opens an avenue toward defect-mitigated PSCs showing enhanced performance and stability.

Interfacial Rivet to Fill Structural Defects: A Spacer Engineering Gift for 3D Solar Cells

The combination of 2D and 3D perovskites to passivate surfaces or interfaces with a high concentration of defects shows great promise for improving the efficiency of perovskite solar cells (PSCs). Constructing high-quality perovskite film systems by precisely modulating 2D perovskites with good morphologies and growth sites on 3D perovskite films remains a formidable challenge due to the complexity of spacer-engineered surface reactions. In this study, phase-pure 2D (HA)2(MA)n-1PbnI3n+1 perovskites with a controlled number of layers (n) are separated on a large scale and exploited as interface rivets to optimize 3D perovskite films, resulting in tunable film structural defects and grain boundaries. The optimized PSCs system benefits from a reduction in non-radiative recombination, resulting in improved optical performance, higher mobility, and lower trap density. The corresponding device achieves a champion power conversion efficiency (PCE) of more than 25%, especially for voltage (VOC) and fill factor (FF). The quality and uniformity of the perovskite films are further confirmed using large-area devices with an active area of 14 cm2, which exhibits a PCE of more than 21.24%. The high-quality thin-film system based on the 2D perovskites presented herein provides a new perspective for improving the efficiency and stability of PSCs.

Intragrain impurity annihilation for highly efficient and stable perovskite solar cells

Intragrain impurities can impart detrimental effects on the efficiency and stability of perovskite solar cells, but they are indiscernible to conventional characterizations and thus remain unexplored. Using in situ scanning transmission electron microscopy, we reveal that intragrain impurity nano-clusters inherited from either the solution synthesis or post-synthesis storage can revert to perovskites upon irradiation stimuli, leading to the counterintuitive amendment of crystalline grains. In conjunction with computational modelling, we atomically resolve crystallographic transformation modes for the annihilation of intragrain impurity nano-clusters and probe their impacts on optoelectronic properties. Such critical fundamental findings are translated for the device advancement. Adopting a scanning laser stimulus proven to heal intragrain impurity nano-clusters, we simultaneously boost the efficiency and stability of formamidinium-cesium perovskite solar cells, by virtual of improved optoelectronic properties and relaxed intra-crystal strain, respectively. This device engineering, inspired and guided by atomic-scale in situ microscopic imaging, presents a new prototype for solar cell advancement.

Suppressing Element Inhomogeneity Enables 14.9% Efficiency CZTSSe Solar Cells

Kesterites, Cu2ZnSn(SxSe1- x)4 (CZTSSe), solar cells suffer from severe open-circuit voltage (VOC) loss due to the numerous secondary phases and defects. The prevailing notion attributes this issue to Sn-loss during the selenization. However, this work unveils that, instead of Sn-loss, elemental inhomogeneity caused by Cu-directional diffusion toward Mo(S,Se)2 layer is the critical factor in the formation of secondary phases and defects. This diffusion decreases the Cu/(Zn+Sn) ratio to 53% at the bottom fine-grain layer, increasing the Sn-/Zn-related bulk defects. By suppressing the Cu-directional diffusion with a blocking layer, the crystal quality is effectively improved and the defect density is reduced, leading to a remarkable photovoltaic coversion efficiency (PCE) of 14.9% with a VOC of 576 mV and a certified efficiency of 14.6%. The findings provide insights into element inhomogeneity, holding significant potential to advance the development of CZTSSe solar cells.

Enhanced Quasi-Fermi Level Splitting of Perovskite Solar Cells by Universal Dual-Functional Polymer

Perovskite solar cells (PSCs) have attracted extensive attention due to their higher power conversion efficiency (PCE) and simple fabrication process. However, the open-circuit voltage (VOC ) loss remains a significant impediment to enhance device performance. Here, a facile strategy to boost the VOC to 95.5% of the Shockley-Queisser (S-Q) limit through the introduction of a universal multifunctional polymer additive is demonstrated. This additive effectively passivates the cation and anion defects simultaneously, thereby leading to the transformation from the strong n-type to weak n-type of perovskite films. Benefitting from the energy level alignment and the suppression of bulk non-radiative recombination, the quasi-Fermi level splitting (QFLS) is enhanced.  Consequently, the champion devices with 1.59 eV-based perovskite reach the highest VOC value of 1.24 V and a PCE of 23.86%. Furthermore, this strategy boosts the VOC by at least 0.07 V across five different perovskite systems, a PCE of 25.04% is achieved for 1.57 eV-based PSCs, and the corresponding module (14 cm2 ) also obtained a high PCE of 21.95%. This work provides an effective and universal strategy to promote the VOC approach to the detailed balance theoretical limit.

Understanding the Role of Fluorine Groups in Passivating Defects for Perovskite Solar Cells

Introducing fluorine (F) groups into a passivator plays an important role in enhancing the defect passivation effect for the perovskite film, which is usually attributed to the direct interaction of F and defect states. However, the interaction between electronegative F and electron-rich passivation groups in the same molecule, which may influence the passivation effect, is ignored. We herein report that such interactions can vary the electron cloud distribution around the passivation groups and thus changing their coordination with defect sites. By comparing two fluorinated molecules, heptafluorobutylamine (HFBM) and heptafluorobutyric acid (HFBA), we find that the F/-NH2 interaction in HFBM is stronger than the F/-COOH one in HFBA, inducing weaker passivation ability of HFBM than HFBA. Accordingly, HFBA-based perovskite solar cells (PSCs) provide an efficiency of 24.70 % with excellent long-term stability. Moreover, the efficiency of a large-area perovskite module (14.0 cm2 ) based on HFBA reaches 21.13 %. Our work offers an insight into understanding an unaware role of the F group in impacting the passivation effect for the perovskite film.

Thermally Crosslinked F-rich Polymer to Inhibit Lead Leakage for Sustainable Perovskite Solar Cells and Modules

High-performance perovskite solar cells have demonstrated commercial viability, but still face the risk of contamination from lead leakage and long-term stability problems caused by defects. Here, an organic small molecule (octafluoro-1,6- hexanediol diacrylate) is introduced into the perovskite film to form a polymer through in-situ thermal crosslinking, of which the carbonyl group anchors the uncoordinated Pb2+ of perovskite and reduces the leakage of lead, along with the -CF2- hydrophobic group protecting the Pb2+ from water invasion. Additionally, the polymer passivates varieties of Pb-related and I-related defects through coordination and hydrogen bonding interactions, regulating the crystallization of perovskite film with reduced trap density, releasing lattice strain, and promoting carrier transport and extraction. The optimal efficiencies of polymer-incorporated devices are 24.76% (0.09 cm2) and 20.66% (14 cm2). More importantly, the storage stability, thermal stability, and operational stability have been significantly improved.

Unveiling the Intrinsic Structure and Intragrain Defects of Organic-Inorganic Hybrid Perovskites by Ultralow Dose Transmission Electron Microscopy

Transmission electron microscopy (TEM) is a powerful tool for unveiling the structural, compositional, and electronic properties of organic-inorganic hybrid perovskites (OIHPs) at the atomic to micrometer length scales. However, the structural and compositional instability of OIHPs under electron beam radiation results in misunderstandings of the microscopic structure-property-performance relationship in OIHP devices. Here, ultralow dose TEM is utilized to identify the mechanism of the electron-beam-induced changes in OHIPs and clarify the cumulative electron dose thresholds (critical dose) of different commercially interesting state-of-the-art OIHPs, including methylammonium lead iodide (MAPbI₃ ), formamidinium lead iodide (FAPbI₃ ), FA_0.83 Cs_0.17 PbI₃ , FA_0.15 Cs_0.85 PbI₃ , and MAPb_0.5 Sn_0.5 I₃ . The critical dose is related to the composition of the OIHPs, with FA_0.15 Cs_0.85 PbI₃ having the highest critical dose of ≈84 e Å^-2 and FA_0.83 Cs_0.17 PbI₃ having the lowest critical dose of ≈4.2 e Å^-2 . The electron beam irradiation results in the formation of a superstructure with ordered I and FA vacancies along <110>_c , as identified from the three major crystal axes in cubic FAPbI₃ , <100>_c , <110>_c , and <111>_c . The intragrain planar defects in FAPbI₃ are stable, while an obvious modification is observed in FA_0.83 Cs_0.17 PbI₃ under continuous electron beam exposure. This information can serve as a guide for ensuring a reliable understanding of the microstructure of OIHP optoelectronic devices by TEM.

Molecular Dipole Engineering of Carbonyl Additives for Efficient and Stable Perovskite Solar Cells

Carbonyl functional materials as additives are extensively applied to reduce the defects density of the perovskite film. However, there is still a lack of comprehensive understanding for the effect of carbonyl additives to improve device performance. In this work, we systematically study the effect of carbonyl additive molecules on the passivation of defects in perovskite films. After a comprehensive investigation, the results confirm the importance of molecular dipole in amplifying the passivation effect of additive molecules. The additive with strong molecular dipole possesses the advantages of enhancing the efficiency and stability of perovskite solar cells (PSCs). After optimization, the companion efficiency of PSCs is 23.20%, and it can maintain long-term stability under harsh conditions. Additionally, a large-area solar cell module-modified DLBA was 20.18% (14 cm2). This work provides an important reference for the selection and designing of efficient carbonyl additives.

Polymerization Strategies to Construct a 3D Polymer Passivation Network toward High Performance Perovskite Solar Cells

The spontaneously formed uncoordinated Pb²⁺ defects usually make the perovskite films demonstrate strong n-type with relatively lower carrier diffusion length and serious non-radiative recombination energy loss. In this work, we adopt different polymerization strategies to construct three-dimensional passivation frameworks in the perovskite layer. Thanks to the strong C≡N⋅⋅⋅Pb coordination bonding and the penetrating passivation structure, the defect state density is obviously reduced, accompanied by a significant increase in the carrier diffusion length. Additionally, the reduction of iodine vacancies also changed the Fermi level of the perovskite layer from strong n-type to weak n-type, which substantially promotes the energy level alignment and carrier injection efficiency. As a result, the optimized device achieved an efficiency exceeded 24 % (the certified efficiency is 24.16 %) with a high open-circuit voltage of 1.194 V, and the corresponding module achieved an efficiency of 21.55 %.

Thermally Crosslinked Hole Conductor Enables Stable Inverted Perovskite Solar Cells with 23.9% Efficiency

Poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) represents the state-of-the-art hole transport material (HTM) in inverted perovskite solar cells (PSCs). However, unsatisfied surface properties of PTAA and high energy disorder in the bulk film hinder the further enhancement of device performance. Herein, a simple small molecule 10-(4-(3,6-dimethoxy-9H-carbazol-9-yl)phenyl)-3,7-bis(4-vinylphenyl)-10H-phenoxazine (MCz-VPOZ) is strategically developed for in situ fabrication of polymer hole conductor (CL-MCz) via a facile and low-temperature cross-linking technology. The resulting polymer CL-MCz offers high energy ordering and improved electrical conductivity, as well as appropriate energy-level alignment, enabling efficient charge carrier collection in the devices. Meanwhile, CL-MCz synchronously provides satisfied surface wettability and interfacial functionalization, facilitating the formation of high-quality perovskite films with fewer bulk iodine vacancies and suppressed carrier recombination. Significantly, the device with CL-MCz yields a champion efficiency of 23.9% along with an extremely low energy loss down to 0.41 eV, which represents the highest reported efficiency for non-PTAA-based polymer HTMs in inverted PSCs. Furthermore, the corresponding unencapsulated devices exhibit competitive shelf-life stability under various operational stressors up to 2500 h, reflecting high promises of CL-MCz in the scalable PSC application. This work underscores the promising potential of the cross-linking approach in preparing low-cost, stable, and efficient polymer HTMs toward reliable PSCs.

A Multifunctional Polymer as an Interfacial Layer for Efficient and Stable Perovskite Solar Cells

Metal-cation defects and halogen-anion defects in perovskite films are critical to the efficiency and stability of perovskite solar cells (PSCs). In this work, a random polymer, poly(methyl methacrylate-co-acrylamide) (PMMA-AM), was synthesized to serve as an interfacial passivation layer for synergistically passivating the under-coordinated Pb²⁺ and anchor the I^- of the [PbI₆ ]^4- octahedron. Additionally, the interfacial PMMA-AM passivation layer cannot be destroyed during the hole transport layer deposition because of its low solubility in chlorobenzene. This passivation leads to an enhancement in the open-circuit voltage from 1.12 to 1.22 V and improved stability in solar cell devices, with the device maintaining 95 % of the initial power conversion efficiency (PCE) over 1000 h of maximum power point tracking. Additionally, a large-area solar cell module was fabricated using this approach, achieving a PCE of 20.64 %.

[Risk factors and chemoprophylaxis of ulcerative colitis-colorectal cancer]

Ulcerative colitis-colorectal cancer (UC-CRC) is one of the most serious complications in patients with ulcerative colitis (UC), with worse prognosis and higher mortality than sporadic colorectal cancer (CRC). Since most UC-CRC developed through the "inflammation-dysplasia-carcinoma" approach, early detection of dysplasia through identification of high-risk groups reasonable monitoring and active prevention are extremely important. However, there is no consensus on the risk factors of UC carcinogenesis and the drugs that can be used for chemoprevention currently. This article combined with relevant literature at home and abroad, reviewed the current risk factors and chemopreventive drugs for UC carcinogenesis, in order to provide reference for early prevention, early detection and early diagnosis of UC-CRC.

[Predicting value on short-term outcome of various established risk prediction models in extracorporeal membrane oxygenation treated cardiogenic shock patients due to ST-segment elevation myocardial infarction]

Objective: To investigate the predicting value of different risk prediction models for short-term death in patients with ST-segment elevation myocardial infarction (STEMI) complicated by cardiogenic shock and treated with extracorporeal membrane oxygenation (ECMO). Methods: This study was a retrospective case-control study. Forty patients with STEMI complicated by cardiogenic shock who hospitalized in the First Affiliated Hospital of Zhengzhou University from April 2017 to August 2021 and treated with percutaneous coronary intervention (PCI) and ECMO, were enrolled in this study. Patients were divided into survival group and death group according to their clinical outcomes at 30 days after ECMO implantation, and clinical data of the two groups were collected and analyzed. Receiver operating characteristic (ROC) curve and decision curve analysis (DCA) were used to compare the predictive value of ACEF, AMI-ECMO, Encourage and SAVE risk scores for mortality at 30 days after ECMO implantation. According to the evaluation results of DCA, the optimal risk score was selected. Kaplan-Meier curve estimating the 30-day survival after ECMO implantation was plotted by grouping risk scores with reference to previous literatures. Results: A total of 40 patients with STEMI combined with cardiogenic shock were included, age was (57.4±16.7) years, 31 (77.5%) patients were male, there were 21 (52.5%) patients in the death group and 19 (47.5%) in the survival group. Compared with the survival group, patients in the death group had higher lactic acid values, higher proportion of anterior descending artery or left main artery lesions, and a higher proportion of acute renal failure and continuous renal replacement therapy during hospitalization (all P<0.05). Compared with survival group, ACEF, AMI-ECMO and Encourage scores were higher in death group, SAVE score was lower in death group (all P<0.05). The ROC curve analysis showed that the area under the curve (AUC) of ACEF, AMI-ECMO, Encourage and SAVE scores in predicting mortality were 0.707, 0.816, 0.757, and 0.677 respectively (P>0.05). ACEF score demonstrated the highest sensitivity (90.5%) and Encourage score exhibited the highest specificity (89.5%). DCA indicated that the AMI-ECMO and Encourage scores had the best performance in predicting the 30-day mortality after ECMO therapy. Kaplan-Meier survival curve analysis showed that the 30-day mortality after ECMO implantation increased with the increase of AMI-ECMO and Encourage scores (log-rank P≤0.001). Conclusions: The 4 scoring systems are all suitable for predicting 30-day mortality after VA-ECMO therapy in patients with ST-segment elevation myocardial infarction complicated by cardiogenic shock. Among them, AMI-ECMO and Encourage scores have better predicting performance.

The inhibitory effect of LINC00261 upregulation on the pancreatic cancer EMT process is mediated by KLF13 via the mTOR signaling pathway

PURPOSE

The long noncoding RNA LINC00261 was reported to be involved in carcinogenesis and has been validated as a tumor suppressor in pancreatic cancer (PC); however, how LINC00261 is regulated has not been fully examined. Here, we attempted to investigate the upstream and downstream targets of LINC00261 in PC.

METHODS

LINC00261 expression in PC tissues was examined by the Gene Expression Omnibus (GEO) datasets and the Gene Expression Profiling Interactive Analysis (GEPIA) database. The quantitative reverse transcription polymerase chain reaction (qRT-PCR) assays were performed to detect the expression level of LINC00261 in PC cells. The location of LINC00261 in PC cells was identified by RNA fluorescence in situ hybridization (RNA-FISH). Cell Counting Kit-8 (CCK-8), cell apoptosis assay, transwell invasion and migration assays testified the critical role of LINC00261 in PC. The luciferase reporter assay was applied to confirm the binding of LINC00261 to its upstream transcription factor KLF13. The changes in LINC00261 related target protein levels were analyzed by Western blotting assay.

RESULTS

LINC00261 was significantly lower in PC tissues and was mainly concentrated in the nucleus. Overexpression of LINC00261 inhibited the invasion and migration of PC cells. Mechanistically, transcription factor KLF13 was confirmed to inhibit the epithelial-mesenchymal transition (EMT) process of PC cells by promoting the transcription of LINC00261 and suppressing the expression of metastasis-associated proteins, such as matrix metalloproteinase MMP2 and vimentin, thus inhibiting the metastasis of PC.

CONCLUSION

LINC00261 regulates PC cell metastasis through the "KLF13-LINC00261-mTOR-P70S6K1-S6" signaling pathway, which provides a significant set of potential PC therapeutic targets.

[Early effect of extracorporeal membrane oxygenation and factors related to early outcome in adult patients with fulminant myocarditis]

Objective: To evaluate the efficacy within the first 24 h post extracorporeal membrane pulmonary oxygenation (ECMO) and the impact of early efficacy on the prognosis of adult patients with fulminant myocarditis (FM). Methods: This retrospective case analysis study included hospitalized patients (age≥18 years) who were diagnosed with fulminant myocarditis from November 2016 to May 2021 in the First Affiliated Hospital of Zhengzhou University. Patients were divided into survival or non-survival groups according to treatment outcomes. The age, sex, treatments, drug use, ECMO use, clinical and laboratory data (before and 24 h after the use of ECMO) were analyzed. The change rate of clinical and laboratory data after 24 h use of ECMO was calculated to find differences between two groups. Multivariate logistic regression was used to analyze the related factors with in-hospital death and complication between the two groups. Results: A total of 38 FM patients treated with ECMO were included. There were 23 cases (60.5%) in the survival group, aged (39.6±13.7) years, and 17 (73.9%) cases were female. The total ECMO time was (134.4±71.3)h. There were 15 cases (39.5%) in non-survival group, aged (40.0±15.8) years, and there were 12(80.0%) female, the ECMO time was (120.1±72.4) h in this group. The proportion of tracheal intubation and continuous renal replacement therapy in the survivor group and dosage of norepinephrine within 24 h after ECMO implantation were significantly less than in non-survival group (all P<0.05). There was no significant difference in all efficacy related biochemical indexes between two groups before ECMO use. The levels of lactic acid, procalcitonin, creatinine, alanine aminotransferase, aspartate aminotransferase, creatine kinase-MB, cardiac troponin I and N-terminal B-type natriuretic peptide prosoma were significantly less in survival group than in non-survival group at 24 h after the use of ECMO (all P<0.05). Results of multivariate logistic regression analysis showed that the higher 24 h change rate of creatinine (OR=0.587, 95%CI 0.349-0.986, P=0.044) and creatine kinase-MB (OR=0.177, 95%CI 0.037-0.841, P=0.029) were positively correlated with reduced risk of in-hospital mortality. The central hemorrhage and acute kidney injury in survival group were less than in non-survivor group (P<0.05). Conclusions: After 24 h early use of ECMO in FM patients, the improvement of various efficacy related biochemical test indexes in the survival group was better than that in the non-survival group. Faster reduction of creatine kinase-MB and creatinine values within 24 h ECMO use is positively correlated with reduced risk of in-hospital mortality in adult patients with FM.

Pressure-Assisted Space-Confinement Strategy to Eliminate PbI2 in Perovskite Layers toward Improved Operational Stability

The existence of the PbI₂ phase in the perovskite film is normally inevitable because of the easy sublimation of the organic component during the crystallization process under a relatively high annealing temperature. However, excess PbI₂ will cause significant degradation on open current voltage (V_OC) and fill factor (FF) under continuous illumination. Here, we developed a pressure-assisted space-confinement (PASC) method to enhance the phase purity of the perovskite film fabricated by the two-step spin-coating method. It was found that high pressure is more conductive to lower the sublimation rate of the organic units, and the space confinement is more favorable for the Ostwald ripening. The combination of them can easily fabricate high-quality perovskite films with large crystal grains and eliminated PbI₂ remnants. As expected, the efficiency of the solar cell was improved from 20.38 to 22.26%; more importantly, the operational stability of the corresponding device had a pronounced improvement, which remains over 85% of its initial efficiency after 500 h maximum power point tracking measurement. Based on this PASC method, a prototype PSC module (PSM) with an active area of 14 cm² was also fabricated reaching an efficiency over 17%.

Atomically Resolved Electrically Active Intragrain Interfaces in Perovskite Semiconductors

Deciphering the atomic and electronic structures of interfaces is key to developing state-of-the-art perovskite semiconductors. However, conventional characterization techniques have limited previous studies mainly to grain-boundary interfaces, whereas the intragrain-interface microstructures and their electronic properties have been much less revealed. Herein using scanning transmission electron microscopy, we resolved the atomic-scale structural information on three prototypical intragrain interfaces, unraveling intriguing features clearly different from those from previous observations based on standalone films or nanomaterial samples. These intragrain interfaces include composition boundaries formed by heterogeneous ion distribution, stacking faults resulted from wrongly stacked crystal planes, and symmetrical twinning boundaries. The atomic-scale imaging of these intragrain interfaces enables us to build unequivocal models for the ab initio calculation of electronic properties. Our results suggest that these structure interfaces are generally electronically benign, whereas their dynamic interaction with point defects can still evoke detrimental effects. This work paves the way toward a more complete fundamental understanding of the microscopic structure–property–performance relationship in metal halide perovskites.

Polyacrylonitrile-Coordinated Perovskite Solar Cell with Open-Circuit Voltage Exceeding 1.23 V

In solution-processed organic-inorganic halide perovskite films, halide-anion related defects including halide vacancies and interstitial defects can easily form at the surfaces and grain boundaries. The uncoordinated lead cations produce defect levels within the band gap, and the excess iodides disturb the interfacial carrier transport. Thus these defects lead to severe nonradiative recombination, hysteresis, and large energy loss in the device. Herein, polyacrylonitrile (PAN) was introduced to passivate the uncoordinated lead cations in the perovskite films. The coordinating ability of cyano group was found to be stronger than that of the normally used carbonyl groups, and the strong coordination could reduce the I/Pb ratio at the film surface. With the PAN perovskite film, the device efficiency improved from 21.58 % to 23.71 % and the open-circuit voltage from 1.12 V to 1.23 V, the ion migration activation energy increased, and operational stability improved.

Reducing Defects Density and Enhancing Hole Extraction for Efficient Perovskite Solar Cells Enabled by π-Pb2+ Interactions

Molecular doping is an of significance approach to reduce defects density of perovskite and to improve interfacial charge extraction in perovskite solar cells. Here, we show a new strategy for chemical doping of perovskite via an organic small molecule, which features a fused tricyclic core, showing strong intermolecular π-Pb²⁺ interactions with under-coordinated Pb²⁺ in perovskite. This π-Pb²⁺ interactions could reduce defects density of the perovskite and suppress the nonradiative recombination, which was also confirmed by the density functional theory calculations. In addition, this doping via π-Pb²⁺ interactions could deepen the surface potential and downshift the work function of the doped perovskite film, facilitating the hole extraction to hole transport layer. As a result, the doped device showed high efficiency of 21.41 % with ignorable hysteresis. This strategy of fused tricyclic core-based doping provides a new perspective for the design of new organic materials to improve the device performance.

Carrier Diffusion and Recombination Anisotropy in the MAPbI3 Single Crystal

MAPbI₃, one of the archetypical metal halide perovskites, is an exciting semiconductor for a variety of optoelectronic applications. The photoexcited charge-carrier diffusion and recombination are important metrics in optoelectronic devices. Defects in grain interiors and boundaries of MAPbI₃ films cause significant nonradiative recombination energy losses. Besides defect impact, carrier diffusion and recombination anisotropy introduced by structural and electronic discrepancies related to the crystal orientation are vital topics. Here, large-sized MAPbI₃ single crystals (SCs) were grown, with the (110), (112), (100), and (001) crystal planes simultaneously exposed through the adjusting ratios of PbI₂ to methylammonium iodide (MAI). Such MAPbI₃ SCs exhibit a weak n-type semiconductor character, and the Fermi levels of these planes were slightly different, causing a homophylic p-n junction at crystal ledges. Utilizing MAPbI₃ SCs, the photoexcited carrier diffusion and recombination within the crystal planes and around the crystal ledges were investigated through time-resolved fluorescence microscope. It is revealed that both the (110) and (001) planes were facilitated to be exposed with more MAI in the growth solutions, and the photoluminescence (PL) of these planes manifesting a red-shift, longer carrier lifetime, and diffusion length compared with the (100) and (112) planes. A longer carrier diffusion length promoted photorecycling. However, excessive MAI-assisted grown MAPbI₃ SCs could increase the radiative recombination. In addition, it revealed that the carrier excited within the (001) and (112) planes was inclined to diffuse toward each other and was favorable to be extracted out of the grain boundaries or crystal ledges.

Evaluation of the Haemophilus influenzae EUCAST and CLSI disc diffusion methods to recognize aminopenicillin and amoxicillin/clavulanate resistance

OBJECTIVES

Implementation of EUCAST susceptibility testing in an Australian hospital laboratory demonstrated higher rates of aminopenicillin and amoxicillin/clavulanate resistance in Haemophilus influenzae than previously recognized. This study aimed to better define the variability in the detection of β-lactam resistance based on EUCAST and CLSI disc diffusion (DD) methodology, by comparison with the recommended reference method, broth microdilution (BMD), and by concordance with genomic analysis.

METHODS

A total of 100 random H. influenzae isolates were assessed for ampicillin and amoxicillin/clavulanate susceptibility by EUCAST and CLSI DD and BMD. WGS was used to analyse the ftsI gene of a subset of isolates with β-lactam resistance, other than that due to isolated β-lactamase production.

RESULTS

Of the 100 isolates, 32 were categorized as either β-lactamase negative, ampicillin resistant (BLNAR) (n = 18) or β-lactamase positive, amoxicillin/clavulanate resistant (BLPACR) (n = 14) by EUCAST DD. All 18 EUCAST BLNAR isolates were genotypically confirmed by WGS. Five of 18 BLNAR isolates were concordant by CLSI DD, 12 by EUCAST BMD and 4 by CLSI BMD. Nine of 14 EUCAST BLPACR isolates were confirmed by WGS; the remaining 5 were 1 mm below the EUCAST DD breakpoint. Only one isolate was detected as BLPACR by CLSI DD. Group III mutations associated with high-level ampicillin resistance were identified in 10/32 isolates.

CONCLUSIONS

The EUCAST DD susceptibility method is more reliable than either CLSI or BMD for the detection of genotypically defined BLNAR resistance. However, accurate categorization of amoxicillin/clavulanate resistance remains problematic. Continuous and reproducible surveillance of resistance is needed; for this to be possible, robust susceptibility methods are required.

Dual-Functional Additive to Simultaneously Modify the Interface and Grain Boundary for Highly Efficient and Hysteresis-Free Perovskite Solar Cells

The efficiency loss and stability issues of perovskite devices mainly derive from nonradiative recombination, caused by detrimental defects in the perovskite bulk and at the interface between the perovskite absorber and charge transport layer. Therefore, the passivation of these defects is of great concern in achieving high-performance perovskite devices. Here, we report the incorporation of potassium phenyl trifluoroborate (KC₆H₅BF₃) into perovskite films to realize simultaneous passivation of the grain boundaries and the perovskite/SnO₂ interface. Apart from the bulk passivation of K⁺, the accumulation of C₆H₅BF₃^- at the buried interface contributes to the compact contact between the perovskite absorber and SnO₂ layer and also the perfect columnar perovskite grains. As a result, the KC₆H₅BF₃-containing perovskite films exhibit low trap density. The distinct enhancements of open-circuit voltage and photoelectric conversion efficiency are obtained together with negligible hysteresis. The open-circuit voltage of the KC₆H₅BF₃-containing device increases from 1.09 to 1.18 V, and the corresponding efficiency increases from 19.69 to 22.33%. The finding in this work shows the superiority of the dual-functional additive for preparing highly efficient perovskite devices.

High-Pressure Nitrogen-Extraction and Effective Passivation to Attain Highest Large-Area Perovskite Solar Module Efficiency

Slot-die coating holds advantages over other large-scale technologies thanks to its potential for well-controlled, high-throughput, continuous roll-to-roll fabrication. Unfortunately, it is challenging to control thin.film uniformity over a large area while maintaining crystallization quality. Herein, by using a high-pressure nitrogen-extraction (HPNE) strategy to assist crystallization, a wide processing window in the well-controlled printing process for preparing high-quality perovskites is achieved. The yellow-phase perovskite generated by the HPNE acts as a crucial intermediate phase to produce large-area high-quality perovskite film. Furthermore, an ionic liquid is developed to passivate the perovskite surface to reduce surface defect density and to suppress carrier recombination, resulting in significantly increased efficiency to 22.7%, the highest for large-area fabrication. The strategies are successfully extended to large-area device fabrication, making it possible to produce a 40 × 40 mm² module with stabilized PCE as high as 19.4%, the highest-efficiency for a large-area module to date.

The Possible Side Reaction in the Annealing Process of Perovskite Layers

The high purity of light harvesting layers is one of the core issues for highly efficient perovskite solar cells. The perovskite precursor solution and the crystallization growth of thin films have been extensively studied in the past few years. Herein, we have unveiled some side reactions that occur during the evaporation of the residual solvent in the spin-coated films at elevated temperature, forming N-methyl formamidium iodide and N,N'-dimethyl formamidium iodide. Such side reactions will consume the precursor materials and then produce a secondary phase in the perovskite films, which is detrimental for the performance improvement. We have also found that a combination of room temperature aging and vacuum treatment of the spin-coated wet film is conducive to eliminate the side reactions and improve the perovskite phase purity, reaching an efficiency of 20.98%.

Cs4 PbI6 -Mediated Synthesis of Thermodynamically Stable FA0.15 Cs0.85 PbI3 Perovskite Solar Cells

The stability issue is still one of the main limitations of the commercialization of perovskite photovoltaics. The mixed cation FA_x Cs_{1 -x} PbI₃ has shown great promise owing to its improved thermal and moisture stability. However, the study of FA_x Cs_{1 -x} PbI₃ is concentrated on formamidine (FA)-rich perovskite, whereas cesium (Cs)-rich FA_x Cs_{1 -x} PbI₃ perovskites are barely studied due to the inevitable phase separation when Cs > 30 mol%. Here, a Cs₄ PbI₆ -mediated method is developed to synthesize Cs-rich FA_x Cs_{1 -x} PbI₃ perovskites. It is demonstrated that Cs₄ PbI₆ intermediate phase has a low Cs cation diffusion barrier and therefore offers a fast ion exchange with the preformed FA-rich perovskite phase to finally form the Cs-rich FA_x Cs_{1 -x} PbI₃ perovskite. The results indicate that ≈15% alloying with organic FA cations can sufficiently stabilize the perovskite phase with excellent phase and UV-irradiation stability. The FA_0.15 Cs_0.85 PbI₃ perovskite solar cells achieve a champion power conversion efficiency of 17.5%, showing the great potential of Cs-based perovskites for efficient and stable solar cells.

Comparison of single and dual latent tuberculosis screening strategies before biologic and targeted therapy in patients with rheumatic diseases: a retrospective cohort study

PURPOSE

Before biologic and targeted synthetic disease-modifying antirheumatic drug (b/tsDMARD) treatment, latent tuberculosis infection (LTBI) screening by tuberculin skin test (TST) or interferon gamma release assay (IGRA) is recommended. However, both tests have reduced reliability in immunosuppressed patients. We investigated whether dual LTBI screening with both tests could reduce the incidence of tuberculosis.

METHODS

Consecutive patients receiving b/tsDMARDs for rheumatic diseases in a regional hospital were recruited. All patients underwent either TST/IGRA or both. They were categorised into a single or dual testing group and were followed up for at least 6 months. Isoniazid was prescribed if any one test was positive.

RESULTS

In total, 217 patients were included in this study; 121 underwent single LTBI testing and 96 underwent dual testing. Tuberculosis occurred in nine patients in the single testing group and one patient in the dual testing group (7.4% vs 1.0%, P=0.045). However, the difference was not statistically significant when follow-up duration was considered (log rank test). In total, 71 patients tested positive for LTBI with isoniazid treatment (28.9% in the single testing group and 45.8% in the dual testing group, P=0.007). Agreement between the IGRA and TST was 74.4% (Cohen's kappa=0.413); agreement was lower in patients receiving prednisolone. Infliximab use was independently associated with tuberculosis (P=0.032). Mild isoniazid-related side-effects occurred in seven patients.

CONCLUSIONS

Dual LTBI testing with both TST and IGRA is effective and safe. It might be useful for patients receiving prednisolone at the time of LTBI screening, or if infliximab therapy is anticipated.

Influence of protogynous sex change on recovery of fish populations within marine protected areas

Marine protected areas (MPAs) are increasingly implemented as a conservation tool worldwide. In many cases, they are managed adaptively: the abundance of target species is monitored, and observations are compared to some model-based expectation for the trajectory of population recovery to ensure that the MPA is achieving its goals. Most previous analyses of the transient (short-term) response of populations to the cessation of fishing inside MPAs have dealt only with gonochore (fixed-sex) species. However, many important fishery species are protogynous hermaphrodites (female-to-male sex-changing). Because size-selective harvest will predominantly target males in these species, harvesting not only reduces abundance but also skews the sex ratio toward females. Thus the response to MPA implementation will involve changes in both survival and sex ratio, and ultimately reproductive output. We used an age-structured model of a generic sex-changing fish population to compare transient population dynamics after MPA implementation to those of an otherwise similar gonochore population and examine how different features of sex-changing life history affect those dynamics. We examined both demographically open (most larval recruitment comes from outside the MPA) and demographically closed (most larval recruitment is locally produced) dynamics. Under both scenarios, population recovery of protogynous species takes longer when fishing was more intense pre-MPA (as in gonochores), but also depends heavily on the mating function, the degree to which the sex ratio affects reproduction. If few males are needed and reproduction is not affected by a highly female-biased sex ratio, then population recovery is much faster; if males are a limiting resource, then increases in abundance after MPA implementation are much slower than for gonochores. Unfortunately, the mating function is largely unknown for fishes. In general, we expect that most protogynous species with haremic mating systems will be in the first category (few males needed), though there is at least one example of a fish species (though not a sex-changing species) for which males are limiting. Thus a better understanding of the importance of male fish to population dynamics is needed for the adaptive management of MPAs.

UV degradation of the interface between perovskites and the electron transport layer

The stability of the perovskite/electron transport layer (ETL) interface is critical for perovskite solar cells due to the presence of ultraviolet (UV) light in the solar spectrum. Herein, we have studied the decomposition process and performance evolution of the perovskite layer in contact with different ETLs under strong ultraviolet irradiation. The normally used SnO₂ layer has lower photocatalytic activity in comparison with the TiO₂ layer, but the perovskite/SnO₂ interface is still severely decomposed along with the formation of hole structures. Such UV light-induced decomposition, on the one hand, leads to the decomposition of the perovskite phase into PbI₂ and more seriously, the formed hole structure significantly limits the carrier injection at the interface owing to the separation of the perovskite active layer from ETLs. Under the same conditions, the perovskite/PCBM interface is very stable and maintains a highly efficient carrier injection. There is no significant efficiency degradation of the encapsulated PCBM-based devices measured outdoors for about three months.

Using SnO₂ as the ETL in perovskite solar cells can degrade the interface and cause device performance degradation under UV light.

Photo-Supercapacitors Based on Third-Generation Solar Cells

Photopowered energy systems (PPESs), which simultaneously achieve power conversion and energy storage, are one of the most promising auxiliaries to fulfill the giant and diversified power demand in modern society. Devices with a low cost, wearable, compact structure and the potential to add a variety of features (such as photochromic, flexible, textile, and wearable) have received extensive research attention. Photo-supercapacitors are becoming one of the most extensively researched PPESs due to their ease of fabrication, mitigation of solar irradiation discontinuities, and the promotion of renewable energy utilization, and these devices have been fabricated with different combinations of photovoltage devices and energy-storage technologies. This review summarizes the development of photo-supercapacitors that integrate third-generation solar cells and supercapacitors, with a focus on materials alignment, performance, structure design, and application. Finally, current challenges, possible solutions, and future perspectives are discussed.