Rapid Assemble of MnC2O4 Microtubes Using a Microchannel Reactor and Their Use as an Anode Material for Lithium-ion Batteries

Achieving ultrastability and efficient lithium storage capacity with high-energy iron(II) oxalate anode materials by compositing Ge nano-conductive sites

Transition metal oxalates (TMOxs, represented by iron oxalate) have attracted considerable interest in anode materials due to their excellent lithium storage properties and consistent cyclic performance. Although investigations into their electrochemical capabilities and lithium storage mechanisms are gradually deepening, the complex and varied electrochemical reactions in the initial cycle, poor inherent conductivity, and high irreversible capacity constrain their further development. Herein, to solve the above-mentioned problems, we controlled the hydrothermal synthesis conditions of iron oxalate with the assistance of organic solvents, which induced the growth of iron oxalate crystals with nano Ge metal as the core. The metal Ge space sites compounded to the stacked iron oxalate particles act as conductive nodes and metal frames, which enhances both the strength of iron oxalate samples and electronic conductivity and lithium-ion diffusion inside the electrode materials. This special structure enhances the electrochemical activity of iron oxalates and improves their lithium storage capability. The iron oxalate @ nano Ge metal composite (FCO@Ge-1) exhibits an excellent cycling performance and an appreciable reversible specific capacity (1090 mA h g^-1 after 200 cycles at 1 A g^-1). The obvious polarization and variation of the electrochemical reaction in the initial cycle of iron oxalate are reduced by compositing nano Ge metal. It is demonstrated that nano Ge metal can promote reversible capacity retention from 67.72% to 80.69% in the early cycles. The distinctive structure of iron oxalate @ nano Ge metal composite provides a fresh pathway to enhance oxalate electrochemical reversible lithium storage activity and develop high-energy electrode material by constructing composite space conductive sites.

High Pseudocapacitance-Driven CoC2 O4 Electrodes Exhibiting Superior Electrochemical Kinetics and Reversible Capacities for Lithium-Ion and Lithium-Sulfur Batteries

In this study, cuboid-like anhydrous CoC₂ O₄ particles (CoC₂ O₄ -HK) are synthesized through a potassium citrate-assisted hydrothermal method, which possess well-crystallized structure for fast Li⁺ transportation and efficient Li⁺ intercalation pseudocapacitive behaviors. When being used in lithium-ion batteries, the as-prepared CoC₂ O₄ -HK delivers a high reversible capacity (≈1360 mAh g^-1 at 0.1 A g^-1 ), good rate capability (≈650 mAh g^-1 at 5 A g^-1 ) and outstanding cycling stability (835 mAh g^-1 after 1000 cycles at 1 A g^-1 ). Characterizations illustrate that the Li⁺ -intercalation pseudocapacitance dominates the charge storage of CoC₂ O₄ -HK electrode, together with the reversible reaction of CoC₂ O₄ +2Li⁺ +2e^- →Co+Li₂ C₂ O₄ on discharging and charging. In addition, CoC₂ O₄ -HK particles are also used together with carbon-sulfur composite materials as the electrocatalysts for lithium-sulfur (Li-S) battery, which displays a gratifying sulfur electrochemistry with a high reversibility of 1021.5 mAh g^-1 at 2 C and a low decay rate of 0.079% per cycle after 500 cycles. The density functional theory (DFT) calculations show that CoC₂ O₄ /C can regulate the adsorption-activation of reaction intermediates and therefore boost the catalytic conversion of polysulfides. Therefore, this work presents a new prospect of applying CoC₂ O₄ as the high-performance electrode materials for rechargeable Li-ion and Li-S batteries.

Controllable and Scale-Up Synthesis of Nickel-Cobalt Boride@Borate/RGO Nanoflakes via Reactive Impingement Mixing: A High-Performance Supercapacitor Electrode and Electrocatalyst

Large-scale synthesis of graphene-based nanomaterials in stirred tank reactor (STR) often results in serious agglomeration because of the poor control during micromixing process. In this work, reactive impingement mixing is conducted in a two-stage impinging jet microreactor (TS-IJMR) for the controllable and scale-up synthesis of nickel-cobalt boride@borate core-shell nanostructures on RGO flakes (NCBO/RGO). Benefiting from the good process control and improved micromixing efficiency of TS-IJMR, NCBO/RGO nanosheet provides a large BET surface area, abundant of suitable mesopores (2–5 nm), fast ion diffusion, and facile electron transfer within the whole electrode. Therefore, NCBO/RGO electrode exhibits a high specific capacitance of 2383 F g−1 at 1 A g−1, and still retains 1650 F g−1 when the current density is increased to 20 A g−1, much higher than those of nickel boride@borate/RGO (NBO/RGO) and cobalt boride@borate/RGO (CBO/RGO) synthesized in TS-IJMR, as well as NCBO/RGO-S synthesized in STR. In addition, an asymmetric supercapacitor (NCBO/RGO//AC) is constructed with NCBO/RGO and activated carbon (AC), which displays a high energy density of 53.3 W h kg−1 and long cyclic lifespan with 91.8% capacitance retention after 5000 charge-discharge cycles. Finally, NCBO/RGO is used as OER electrocatalyst to possess a low overpotential of 309 mV at a current density of 10 mA cm−2 and delivers a good long-term durability for 10 h. This study opens up the potential of controllable and scale-up synthesis of NCBO/RGO nanosheets for high-performance supercapacitor electrode materials and OER catalysts.

Proton solvent-controllable synthesis of manganese oxalate anode material for lithium-ion batteries

Manganese oxalates with different structures and morphologies were prepared by the precipitation method in a mixture of dimethyl sulfoxide (DMSO) and proton solvents. The proton solvents play a key role in determining the structures and morphologies of manganese oxalate. Monoclinic MnC2O4·2H2O microrods are prepared in H2O-DMSO, while MnC2O4·H2O nanorods and nanosheets with low crystallinity are synthesized in ethylene glycol-DMSO and ethanol-DMSO, respectively. The corresponding dehydrated products are mesoporous MnC2O4 microrods, nanorods, and nanosheets, respectively. When used as anode material for Li-ion batteries, mesoporous MnC2O4 microrods, nanorods, and nanosheets deliver a capacity of 800, 838, and 548 mA h g-1 after 120 cycles at 8C, respectively. Even when charged/discharged at 20C, mesoporous MnC2O4 nanorods still provide a reversible capacity of 647 mA h g-1 after 600 cycles, exhibiting better rater performance and cycling stability. The electrochemical performance is greatly influenced by the synergistic effect of surface area, morphology, and size. Therefore, the mesoporous MnC2O4 nanorods are a promising anode material for Li-ion batteries due to their good cycle stability and rate performance.

Rapid and Controllable Synthesis of Nanocrystallized Nickel-Cobalt Boride Electrode Materials via a Mircoimpinging Stream Reaction for High Performance Supercapacitors

Nickel-cobalt borides (denoted as NCBs) have been considered as a promising candidate for aqueous supercapacitors due to their high capacitive performances. However, most reported NCBs are amorphous that results in slow electron transfer and even structure collapse during cycling. In this work, a nanocrystallized NCBs-based supercapacitor is successfully designed via a facile and practical microimpinging stream reactor (MISR) technique, composed of a nanocrystallized NCB core to facilitate the charge transfer, and a tightly contacted Ni-Co borates/metaborates (NCB_i ) shell which is helpful for OH^- adsorption. These merits endow NCB@NCB_i a large specific capacity of 966 C g^-1 (capacitance of 2415 F g^-1 ) at 1 A g^-1 and good rate capability (633.2 C g^-1 at 30 A g^-1 ), as well as a very high energy density of 74.3 Wh kg^-1 in an asymmetric supercapacitor device. More interestingly, it is found that a gradual in situ conversion of core NCBs to nanocrystallized Ni-Co (oxy)-hydroxides inwardly takes place during the cycles, which continuously offers large specific capacity due to more electron transfer in the redox reaction processes. Meanwhile, the electron deficient state of boron in metal-borates shells can make it easier to accept electrons and thus promote ionic conduction.