Nanointerfaces of expanded graphite and Fe2O3 nanomaterials for electrochemical monitoring of multiple organic pollutants

Highly selective electrochemical sensing of hydroquinone and catechol using Co nanoparticles anchored on N-doped carbon nanotube hollow sphere

BACKGROUND

Hydroquinone (HQ) and catechol (CC), two important isomers with similar structures, are highly toxic, often coexisting, and impeding each other in the simultaneous detection. Electrochemical technique provides a promising alternative toward the quantification of HQ and CC, due to its inherent advantages in terms of highly sensitive reaction, ease of monitoring, low-cost, simplicity and quick response. Development of a sensing material with outstanding electrocatalytic capabilities and its utilization for the fabrication of an electrochemical sensor for highly selective monitoring of HQ and CC is of great significance.

RESULTS

In this study, a novel hierarchical nanostructure is fabricated where Co nanoparticles are anchored on N-doped carbon nanotube hollow sphere (Co/HNC) through the pyrolysis of ZIF-67@ZIF-8 hollow microsphere. On the Co/HNC modified electrode two well-defined and distinguishable peaks are displayed, resulting from electrochemical oxidation of both isomers. As an electrochemical sensor, the recorded peak current displays a linear relationship to the concentration of both HQ and CC from 0.1 to 100 μM under optimal conditions, coupled with their low detection limit of 23 nM and 37 nM, respectively. The probable application of this sensing platform was also checked for the detection of HQ and CC in real samples (e.g., lake water, tap water, detergents, ointment and orange juice), showing outstanding recovery rates. Moreover, simultaneous analysis of HQ and CC exhibited high reproducibility, selectivity and long-term stability.

SIGNIFICANCE

As a highly efficient electrocatalyst, the unique hollow and porous microsphere structure of Co/HNC affords abundant active sites, short ion diffusion path, outstanding electronic conductivity and high electrocatalytic activity, thereby certifying excellent sensing capability for these two important isomers. This study thus efficiently explores the advances of metal/NC with hollow structure for the formation of selective dihydroxybenzene electrochemical sensors.

Shrinking Devices: Shape-Memory Polymer Fabrication of Micro-and Nanostructured Electrodes

Since their discovery in the 1940s, shape memory polymers (SMPs) have been used in a broad spectrum of applications for research and industry.[1] SMPs can adopt a temporary shape and promptly return to their original form when submitted to an external stimulus. They have proven useful in fields such as wearable and stretchable electronics,[2] biomedicine,[3] and aerospace..[4] These materials are attractive and unique due to their ability to "remember" a shape after being submitted to elastic deformation. By combining the properties of SMPs with the advantages of electrochemistry, opportunities have emerged to develop structured sensing devices through simple and inexpensive fabrication approaches. The use of electrochemistry for signal transduction provides several advantages, including the translation into inexpensive sensing devices that are relatively easy to miniaturize, extremely low concentration requirements for detection, rapid sensing, and multiplexed detection. Thus, electrochemistry has been used in biosensing,[5] pollutant detection,[6] and pharmacological[7] applications, among others. To date, there is no review that summarizes the literature addressing the use of SMPs in the fabrication of structured electrodes for electrochemical sensing. This review aims to fill this gap by compiling the research that has been done on this topic over the last decade.

Recent advances on rapid detection and remediation of environmental pollutants utilizing nanomaterials-based (bio)sensors

Environmental safety has become a significant issue for the safety of living species, humans, and the ecosystem as a consequence of the harmful and detrimental consequences of various pollutants such as pesticides, heavy metals, dyes, etc., emitted into the surroundings. To resolve this issue, various efforts, legal acts, scientific and technological perspectives have been embraced, but still remain a global concern. Furthermore, due to non-portability, complex detection, and inappropriate on-site recognition of sophisticated laboratory tools, the real-time analysis of these environmental contaminants has been limited. As a result of innovative nano bioconjugation and nanofabrication techniques, nanotechnology enables enhanced nanomaterials (NMs) based (bio)sensors demonstrating ultra-sensitivity and a short detection time in real-time analysis, as well as superior sensitivity, reliability, and selectivity have been developed. Several researchers have demonstrated the potent detection of pollutants such as Hg²⁺ ion by the usage of AgNP-MD in electronic and optoelectronic methods with a detection limit of 5-45 μM which is quite significant. Taking into consideration of such tremendous research, herein, the authors have highlighted 21st-century strategies towards NMs based biosensor technology for pollutants detection, including nano biosensors, enzyme-based biosensors, electrochemical-based biosensors, carbon-based biosensors and optical biosensors for on-site identification and detection of target analytes. This article will provide a brief overview of the significance of utilizing NMs-based biosensors for the detection of a diverse array of hazardous pollutants, and a thorough understanding of the detection processes of NMs-based biosensors, as well as the limit of quantification (LOQ) and limit of detection (LOD) values, rendering researchers to focus on the world's need for a sustainable earth.

Sensitive Electrochemical Sensor Based On an Aminated MIL-101(Cr) MOF for the Detection of Tartrazine

The aminated metal-organic framework H₂N-MIL-101(Cr) was used as the carbon paste electrode (CPE) modifier for the determination of tartrazine (Tz) in soft drinks. The amino material was characterized by electrochemical impedance spectroscopy and showed significantly faster electron transfer with lower charge-transfer resistance (0.13 kΩ) compared to the electrode modified with the unfunctionalized MIL-101(Cr) material (1.1 kΩ). The H₂N-MIL-101(Cr)-modified CPE [H₂N-MIL-101(Cr)-CPE] was then characterized by cyclic voltammetry (CV) using [Fe(CN)₆]^3- and [Ru(NH₃)₆]³⁺ ions as the redox probes, showing good accumulation of [Fe(CN)₆]^3- ions on the electrode surface. A CV scan of Tz in Britton Robinson buffer solution revealed an irreversible system with an oxidation peak at +0.998 V versus Ag/AgCl/KCl. Using CV and differential pulse voltammetry, an electrochemical method for quantifying Tz in aqueous medium was then developed. Several parameters that affect the accumulation and detection steps were optimized. Optimal detection of Tz was achieved after 180 s of accumulation in Britton Robinson buffer solution (pH 2) using 2 mg of H₂N-MIL-101(Cr) material. Under optimal conditions, the sensor exhibited a linear response in the concentration range of 0.004-0.1 μM and good detection sensitivity (35.4 μA μM^-1), and the detection limit for Tz was found to be 1.77 nM (S/N = 3). Satisfactory repeatability, stability, and anti-interference performance were also achieved on H₂N-MIL-101(Cr)-CPE. The sensor was applied to commercial juices, and the results obtained were approximately similar to those given by UV-vis spectrophotometry.

Two-dimensional BCN nanosheets self-assembled with hematite nanocrystals for sensitively detecting trace toxic Pb(II) ions in natural water

In the present work, hematite-boron-carbonitride (Fe₂O₃-BCN) nanosheets were synthesized by a simple hydrothermal reaction and the following high temperature treatment. The morphology, structure and chemical composition of the as-prepared material were carefully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The Fe₂O₃-BCN nanosheets were used to modified on the surface of the glassy carbon electrode to fabricate an electrochemical sensor for lead ions (Pb(II)) via differential pulse anodic stripping voltammetry (DPASV). At the same time, the influence of the modification concentration, solution acidity, deposition potential and deposition time on response peak current of Pb(II) at the Fe₂O₃-BCN-based electrochemical sensor was well investigated. Under the optimized conditions, the electrochemical signal and concentration of Pb(II) show two-stage linear relationship in the range of 0.5 - 40 μg/L and 40 -140 μg/L, with a limit of detection (LOD) of 0.129 μg/L. The Fe₂O₃-BCN-based electrochemical sensor shows excellent selectivity and anti-interference ability in the anti-interference experiments and actual sample analysis experiments, revealing its broad application in environmental monitoring of Pb(II).

Recent trends in the applications of thermally expanded graphite for energy storage and sensors - a review

Carbon nanomaterials such as carbon dots (0D), carbon nanotubes (1D), graphene (2D), and graphite (3D) have been exploited as electrode materials for various applications because of their high active surface area, thermal conductivity, high chemical stability and easy availability. In addition, due to the strong affinity between carbon nanomaterials and various catalysts, they can easily form metal carbides (examples: ionic, covalent, interstitial and intermediate transition metal carbides) and also help in the stable dispersion of catalysts on the surface of carbon nanomaterials. Thermally expanded graphite (TEG) is a vermicular-structured carbon material that can be prepared by heating expandable graphite up to 1150 °C using a muffle or tubular furnace. At high temperatures, the thermal expansion of graphite occurred by the intercalation of ions (examples: SO4 2-, NO3 -, Li+, Na+, K+, etc.) and oxidizing agents (examples: ammonium persulfate, H2O2, potassium nitrate, potassium dichromate, potassium permanganate, etc.) which helped in the exfoliation process. Finally, the obtained TEG, an intumescent form of graphite, has been used in the preparation of composite materials with various conducting polymers (examples: epoxy, poly(styrene-co-acrylonitrile), polyaniline, etc.) and metal chlorides (examples: FeCl3, CuCl2, and ZnCl2) for hydrogen storage, thermal energy storage, fuel cells, batteries, supercapacitors, sensors, etc. The main features of TEG include a highly porous structure, very lightweight with an apparent density (0.002-0.02 g cm-3), high mechanical properties (10 MPa), thermal conductivity (25-470 W m-1 K-1), high electrical conductivity (106-108 S cm-1) and low-cost. The porosity and expansion ratio of graphite layers could be customized by controlling the temperature and selection of intercalation ions according to the demand. Recently, TEG based composites prepared with metal oxides, chlorides and polymers have been demonstrated for their use in energy production, energy storage, and electrochemical (bio-) sensors (examples: urea, organic pollutants, Cd2+, Pb2+, etc.). In this review, we have highlighted and summarized the recent developments in TEG-based composites and their potential applications in energy storage, fuel cells and sensors with hand-picked examples.

A UiO-66-NH2/carbon nanotube nanocomposite for simultaneous sensing of dopamine and acetaminophen

Carbon nanomaterials are quite promising to be combined with metal-organic frameworks (MOFs) to enhance the sensing ability of both materials. In this work, a MOF nanoparticle of UiO-66-NH₂ is integrated with carbon nanotubes (CNTs) (UiO-66-NH₂/CNTs) with a facile solvothermal method. The morphology, surface area and properties of this UiO-66-NH₂/CNTs nanocomposite was investigated using electron microscopy, XRD, XPS, BET analysis and electrochemical techniques. Catalytic oxidation of dopamine (DA) and acetaminophen (AC) on this nanocomposite was achieved, owing to a 3D hybrid structure or a large electroactive surface area, excellent electrical conductivity, a large number of active sites of this nanocomposite. It was further utilized as a sensing platform to establish an electrochemical sensor for the monitoring of both DA and AC. The enhanced oxidation signals led to the voltametric sensing of DA and AC in a broad linear range from 0.03 to 2.0 μM and low detection limits (S/N = 3) of 15 and 9 nM for DA and AC, respectively. The proposed sensor also possessed good reproducibility, repeatability, long-term stability, selectivity, and satisfactory recovery in serum samples analysis. Therefore, it has the great potential for the accurate quantification of DA and AC in complex matrixes.

Graphitic Carbon Nitride: A Highly Electroactive Nanomaterial for Environmental and Clinical Sensing

Graphitic carbon nitride (g-C3N4) is a two-dimensional conjugated polymer that has attracted the interest of researchers and industrial communities owing to its outstanding analytical merits such as low-cost synthesis, high stability, unique electronic properties, catalytic ability, high quantum yield, nontoxicity, metal-free, low bandgap energy, and electron-rich properties. Notably, graphitic carbon nitride (g-C3N4) is the most stable allotrope of carbon nitrides. It has been explored in various analytical fields due to its excellent biocompatibility properties, including ease of surface functionalization and hydrogen-bonding. Graphitic carbon nitride (g-C3N4) acts as a nanomediator and serves as an immobilization layer to detect various biomolecules. Numerous reports have been presented in the literature on applying graphitic carbon nitride (g-C3N4) for the construction of electrochemical sensors and biosensors. Different electrochemical techniques such as cyclic voltammetry, electrochemiluminescence, electrochemical impedance spectroscopy, square wave anodic stripping voltammetry, and amperometry techniques have been extensively used for the detection of biologic molecules and heavy metals, with high sensitivity and good selectivity. For this reason, the leading drive of this review is to stress the importance of employing graphitic carbon nitride (g-C3N4) for the fabrication of electrochemical sensors and biosensors.